Unable to connect using Windows 7, Atheros and Linksys WRT300N wireless network adapter

Similar Questions

• Satellite A45-S121 unable to connect to "pull the IP Address of my wireless network.

  I try to get a Satellite A45-S121 connected to my or any public wireless network. I used several different wireless Pcmcia cards, but cannot access the Internet. All of the cards work in other portable and can connect to public wifi, but once again not this one. It shows that I am connected but I never get an IP 0.0.0.0

  It detects the Networks to connect then, but in a few minutes, she falls and rediscovered them. I did an ipconfig/release and / renew but still will not pump an IP address. I tried public wifi spots and private WEB connections but no work. Shows Device Manager all three cards work works very well.

  Any help would be greatly appreciated.

  Thank you
  Dave

  Hello Dave

  I fear that some router configurations will not. I recommend you contact your ISP and verify with them all the settings of the router.

  The same problem was one of my friends. There must be something wrong with the settings of the router.
  Have you ever talked with ISP?

• Toshiba TL968 - how to use WiDi - mobile doesn't support Intel wireless network adapter

  Hello

  I just bought a new Smart TL968 LCD HDTV. Unfortunately my computers have no program widi of intel who can send my computer screen to the TV.

  First of all, I would like to know if there is other software that can work with the TV and my computer instead of Intel WIDI software?

  (I ProBook 4530 s laptop computer and a PC with: Intel core ig - 2500 k UPS 3.30 GHz, 8 GB of RAM. 64 - Bit, NVidia GeForce GTX 570)

  My second question is if there are other wireless way to see my computer on the TV screen? He should be able to transfer 3D Full HD (P1080) on television that the TV is supported 3D (TV came with active 3D glasses).

  I tried to connect a HDMI cable, after a few pixels on the screen flick I noticed just there are 3 HDMI cables different, level A, B and C, my TV HDMI B required and higher level, so if there is a HDMI WiFi transfer adapter must be able to send the best image quality include 3D.

  Thank you d ' attribute.

  Kobi

  > Unfortunately my computers have no program widi of intel who can send my computer screen to the TV.

  Intel WiDi is a feature of Intel. It requires special hardware to use Intel WiDi.
  What equipment is required?

  Here you will find all the details:
  http://www.Intel.com/support/wireless/wtech/IWD/sb/CS-032437.htm

  and here you can find the system requirements:
  http://www.Intel.com/support/wireless/wtech/IWD/sb/CS-031059.htm

  If its no matter software but hardware.

• Just updated to IOS 10.0.2 and unable to connect using Store.Please App!

  Just updated to IOS 10.0.2 and unable to connect using Store.Please App!

  Harry

  Hello

  Go down to itunes apple ID page homepage remove ID, then reconnect again.

  See you soon

  Brian

• Unable to connect using the current password

  Using the current password which only had 6 characters - have now changed to 8 hope if this helps solve the problem.
  Have you noticed too there was an update of Mozilla on my laptop the day before that this problem then this could be the reason?

  Unable to connect using the current password

  It is far from a complete problem description.
  Please explain in detail

  • what you were doing
  • That's happened

  Using the current password which only had 6 characters

  6 characters is a very weak password. Consider using a password manager to generate longer and more complex passwords and to remember these passwords.

• I am unable to access the Windows XP updates and unable to set up the automatic update. I have not given an error code. I was only told I can't perform these functions.

  I am unable to access the Windows XP updates and unable to set up the automatic update.  I have not given an error code.  I was only told I can't perform these functions.  I don't have the windows disk that the computer came preloaded with Windows and I don't remember the Administor password I created 5 years ago.  Can anyone help?

  Assume that:

  http://support.Microsoft.com/kb/316524

  You receive an error message 'Administrators' only when you try to visit the Windows Update Web site or the Microsoft Update Web site

  http://support.Microsoft.com/kb/189126

  Microsoft's strategy concerning lost or forgotten passwords

  What I can offer: http://support.microsoft.com/kb/321305

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

• Network connection between Windows 7 Pro and Windows XP Pro wireless

  Nice day.

  I am trying to connect to a Windows XP pro to a home wireless network, hosted by a pc Windows 7 Pro. I can see all the other PCs on the XP pc but cannot get them to connect. When I click the icon for the Windows 7 pc and try to log in (open) he asks a user name and password but I don't know what is the user name. I guess the password is generated by the computer windows 7, when I set up the homegroup. Would you please advise me on what to do to make this work. Thank you.

  Hi ArnBas,

  Looks like you are facing a problem with network computers. I came to find this documentation for you who speaks the networking of the various versions of the computers.

  Just through the same thing and check if everything is fine with the settings. Also, take a look at this very useful information.

  I hope this helps!

• Internet connection with Windows XP, SP3 and Airport Extreme - the status is always "absorbing network address.

  My Airport Extreme connected my IMac immediately, but I am not able to connect on the side PC. Airport utility does not 'no matter what Airport wireless devices". When you check the status of the internet connection with PC tools, the correct network is indicated and shows an excellent signal strength. The status is: "absorbing the network address. However, nothing happens.

  Under 'Repair the wireless network connection', it shows, "Windows is taking the following steps: your IP address renewal" even once, nothing happens.

  Under hardware I show Atheros Wireless Network Adapter and the mention: "this device works correctly.

  Yet, no network connection. Any help will be greatly appreciated.

  Hello

  Keep the changes and open the wireless. For example, to disable security in the router (turn on when to managed to connect).

  You can also try the wireless in a friends house, or an Internet café to get a frame of reference for this behavior elsewhere.

  -------------------

  Wi - Fi in general.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled).

  If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• problem of bluetooth of Windows 8. Phone paired but unable to connect, says Windows phone in offline mode

  Problem of bluetooth of Windows 8. Phone paired but unable to connect, says Windows phone in offline mode

  Somasundaram Mohammed. Thank you for your help and maybe you will pass on the solution to all those in need. All that is necessary is to download Bluetooth Stack Toshiba 9.10 and run it. However be careful because version 9.0 of battery is not compatible. I have now my two Android phones connected.

  Thanks again

  John harney

• After changing the orainventory place im unable to connect using the oracle user

  Hello

  IM using oracle 12 c on rhel 6 after correctly installing the software, I changed the location of oravinventory in/data/houses

  / u01/app/Oracle

  After making these changes im is no longer able to connect using the oracle user...

  also I back return changes I had made to the orainventory folder still unable to connect using the oracle user...

  any help on this would be greatly appreciated

  Sadia. wrote:

  Hello

  IM using oracle 12 c on rhel 6 after correctly installing the software, I changed the location of oravinventory in/data/houses

  / u01/app/Oracle

  After making these changes im is no longer able to connect using the oracle user...

  also I back return changes I had made to the orainventory folder still unable to connect using the oracle user...

  any help on this would be greatly appreciated

  Newer versions of oracle have implemented a great new technology to help solve problems, called "error messages."  Unfortunately, I can't find any reference to an error message named 'is no longer able to connect.

  And why you are moving your site from inventory?  When you have installed oracle, he put the inventory where he wanted.  There is no reason to try to change or replace.

• I am using Windows 8.1 and I just installed Creative Cloud Desktop but whenever I try to open a session then sign

  I am using Windows 8.1 and I just installed Creative Cloud Desktop but whenever I try to open a session then sign

  I tried logging in and out and reinstall but still fails to connect

  Contact adobe support, http://helpx.adobe.com/x-productkb/global/service-ccm.html

• Unable to connect using Face Time after updating iOS 9.3

  Unable to connect using Face Time after updating iOS 9.3

  gshort319 wrote:

  Unable to connect using Face Time after updating iOS 9.3

  Use FaceTime with your iPhone, iPad or iPod touch - Apple Support

  Get help if you cannot make or receive calls FaceTime - Apple Support

• just started using windows live mail and it strips attachments PowerPoint, I receive. How can I change this?

  just started using windows live mail and it strips attachments PowerPoint, I receive. How can I change this?

  Hi hanksterman,

  The question you posted would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the support you want.
  http://windowslivehelp.com/product.aspx?ProductID=15

• I lost the connection to Windows 2003 server and through the connector.

  I lost the connection to Windows 2003 server and through the connector.

  original title: WHS connector has stopped working.

  Hi Mjopritchard,

  The question you have posted is related to Windows Home server and would be better suited to the Windows Home server community.
  Please visit the following link to find a community that will support what ask you:

  Support for Windows Home Server

• I use Windows XP SP3 and cannot open My Documents, my pictures, my music and my computer

  Original title: can not open files

  I use Windows XP SP3 and cannot open My Documents, my pictures, my music and my computer. I get no errors, but nothing happens when I click on one of them.

  Hello

  Thanks for the reply. I managed to solve the problem before you receive your advice to defragment my hard drive. I had the problem on / off power for about six months and defragmentation has not always been successful success so when it happens then I will go through the procedures that you have listed. I have installed and uninstalled various applications in the last six months and suspect that the register is not in optimum condition... I have a problem during a shutdown or reboot stop where I get an error of tfswctrl.exe I close and the system then hangs and requires a medical examination. Is there, by chance, a Microsoft utility that cleans up the registry for applications that have been uninstalled, but be persistent pieces that shouldn't be there?

  Thanks again for your advice.