Unable to connect wireless the deskjet 3050

Hi, try to connect my deskjet 3050 wireless to my netbook. installing the drivers, infact, the printer connects to my network, it is not simply to receive an IP address. can any1 tell me why? is it possible for me to assign an IP address manually, if so how? I have an another leptop connected, 2 phones & ipod to my router, mac address filtering is not lit. and I entered the wireless key manually 3 times, just to be sure!

any help would be great!

solution > zonealarm > Firewall tab > tab areas > add > subnet > ip address 192.168.1.0 255.255.255.0 > > give subnet point a description (anything) > ok > apply

resolved. Happy days

Tags: HP Printers

Similar Questions

  • Unable to connect wireless to Deskjet 3050 a

    I have a Pavilion dv6700 running Vista Business 64-bit (service pack 1) and has a J11b Deskjet 3050.

    I am able to use the printer via a USB cable. However, I'm fighting for a wireless connection.

    Please be patient with me as I don't know the first thing about connections or wireless networks. As far as I can tell, my laptop has a built-in wireless adapter (Broadcom 802 11b / g WLAN). The drivers are up to date.

    I connect to the internet using a mobile usb modem Huawei broadband.

    As well my broadband wireless and mobile connection is set to automatically detect IP and DNS server addresses. Previously, my wireless connection was IP and DNS addresses but this seemed to be causing a conflict with my connection broadband mobile (Windows displays a message to IP address conflict).

    I set up a wireless ad-hoc network. In the list of network connections, there is a message "Waiting for users to connect.

    In any case, I tried to convert my printer for a wireless connection, but my adhoc network (ChichiW) does not appear in the list of available networks. When I enter the SSID of the network is not found. Help, please. I'm at my wits end.

    The Deskjet 3050 a J611 series printer does not support an ad-hoc connection to a computer.  I revise the manual for this printer and did not like an option available for wireless networks. I'm sorry.

    You can see post for a little more information about this PrintDoc.

    Previous versions, such as the Deskjet 3050 J610, has supported this feature from the computer to the printer and the printer to the computer.

    The best option would be to use a wireless router to connect the printer to the computer.

  • Can I connect to the Deskjet 3050 wireless and LAN?

    I have connected to a new deskjet 3050 by WiFi. My laptop and iPhone worked well. I have an old desk top that has no WiFi. Can I also connect it to the 3050 by LAN? The office is connected to the router by LAN so it mails to my hpeprint but I would like to connect it directly to the 3050.

    Hello

    The HP Deskjet 3050 include wireless connectivity options and USB, the printer does not include any LAN interface...

    The printer connected to your wireless router, connection from the desktop to the same router via an Ethernet connection is sufficient, the type of conntaction used network is not serious as long as both devices connected to the same router.

    Make sure that ethernet cable connected to your router with a desktop computer and run the installation by selecting the wireless connection, the device should be detected on the network...

    If you wanted to can use a USB for PC connection, you can do the same. the wireless and USB connection can be used simultanly.

    Shlomi

  • HP Deskjet 3510: HP Deskjet 3510 - unable to connect to the printer

    I had this printer for some time but have never been able to properly print to this printer using this specific computer.   FYI, I'm trying to print wireless at it. This office has wireless compatibility.  I have the drivers and all (I think, I HP everything at the time but not the disk that came with it I lost only).  Don't know why it fails, he said only: "unable to connect to the printer.

    Thanks in advance for any help.

    Hi aunt Shirley.

    First of all, we're going to connect the printer to the network:

    -Restore default values of network within the menu on the front panel of the printer wireless.
    -From your computer, connect wirelessly to the network printer (it should be a name similar to HP - Setup - xx - Deskjet 3510).
    -After successfully connecting to the printer, open a web browser such as Internet Explorer or Chrome and type 192.168.223.1 in the address bar and press ENTER.
    -Click on the Wireless Setup Wizard
    -Select your router and enter the password to connect to the printer to the router.

    Run again the printer software to your computer to rediscover the printer on the network.

    See the support institution by clicking on the thumbs upwards in the post that solved your problem. Doing so will help the other members of the forum their solutions also.

  • Satellite C660-1NJ - unable to connect to the wireless network

    Hi guys

    I got a 1nj c660 and I have a wireless connection to a Fritzbox 7170.

    Now, this morning, everything was fine and I connected wonderfully, but now I can't connect no settings have been changed I just stop and start as usual. I used configfree and it shows the network but if I try to connect it says unable to connect to the network. I have Win7 home basic OS.

    I uninstalled the wireless network card and reinstalled, updated the drivers but nothing works, I still get the same error.

    Can someone help will appreciate it greatly!

    Hello

    Are you able to connect to open WLan?
    I mean you can try to disable security options in your Fritzbox and might test whether you are able to connect without the WEP, WPA or other safety standards.
    Of course, you should only done for testing purposes

    If this box works, then it means that the security of your router settings were not consistent with the settings of the Wlan card.

  • Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

    Original title: Unable to connect to the wireless network

    Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

    I should add that I have tried the solutions of the previous forum on this topic, and none worked.

    Hi Marilynnla,

    Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

    Read this article and follow the steps. Lets see if it helps in any way.

  • Unable to connect wireless, error - could not connect to the internet

    Original Title - connect wirerlessly

    I can't connect to the internet via my wireless router? When I check the availability of networks, the signal is as strong as it gets. However, as soon as I log in, the force goes to far and he says: "Unable to connect to the internet" the distance between the router and (computer) is from 25' to 30'. Any help be greatly appreciated. Thanks in advance

    Hello

    As a first step put the computer near the router and start with the security off the coast.
    When it works, take it back to the final spot. If it stops then working, then you have a problem of distance.

    In general

    My wireless is not working - http://www.ezlan.net/wireless.html

    Basic wireless configuration - http://www.ezlan.net/Wireless_Config.html

    Wireless Security - http://www.ezlan.net/Wireless_Security.html

    Extending remote - http://www.ezlan.net/Distance.html

    Wireless modes - http://www.ezlan.net/Wireless_Modes.html

    Wireless bridging - http://www.ezlan.net/bridging.html

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • Vista PC is offline, unable to connect to the Internet by LAN or wireless.

    Original title: Vista (Japanese OS)

    My Vista pc is offline (unable to connect to the internet), how install and run the Fixit tool?

    I have read that the English, however, my pc is in Japanese. I can't connect to the Internet by LAN or wireless.
    How can I get the Fixit tool to work on the said pc?
    Help, please!

    Hello

    1. what Fixit tool you try to run?

    2. what exactly happens when you try to connect to the Internet? You receive messages or error codes?

    You can read the following article and check if it helps:

    Windows wireless and wired network connection problems

    You can also read the following article to change the display language:

    Change the display language

    You can use another computer to download the Fix from Microsoft, then use portable storage such as a USB drive, CD, DVD, etc., to carry the Microsoft fix it on your computer.

  • Unable to connect to the Internet via a Linksys Wireless card

    I used a Linksys BEFW11S4 for several years with no problems.  A PC is connected via a network cable and the other (Dell laptop) used a wireless adapter Linksys that plugged into the laptop (model of Linksys WPC11 ver (4).  All my computers using Windows XP with the latest service packs.

    I plugged the Dell laptop to the router via a cable to transfer files faster than the network B.  Then, when I disconnected the cable and reconnected the wireless card, I was unable to use the Wi - Fi connection to connect to the internet.  Wired works very well, is not wireless.

    Windows reports a good wireless connection to the router, but the machine is unable to connect to the internet using the wireless card.  It can connect to the internet when using a network cable, however.

    Pings what either using the Wi - Fi connection failed (expired).

    I used another laptop (a more recent Toshiba with a wireless card built-in) to connect to the router and it works very well with the connectivity wired or wireless.  No problem switching back with this machine.  So, the problem is not with the router or the router configuration.

    I was through the forums and seen a LOT of people seems to have the same problem with these Wireless Linksys routers.

    I tried to use the Easy Link software to configure the machine, but: (1) Linksys updated web site is not valid, and (2) with the www.linksysfix.com/ela site that directs users to the software is also invalid.  Linksys technical support seems to be lacking.

    I went to the usual network setup menus and two laptops seem to be configured the same way, again, we're working wireless and we do not.

    I would appreciate solutions others have tried and who has worked with this problem.

    I reinstalled the drivers for the Linksys card and it does not work.  Windows recognizes the new hardware card, reports that it is connected to the router, but still no internet connection

  • Printer Hp6700: unable to connect to the router wireless D - Link DI-514 when SSID Broadcast is set to no.

    HP6700 printer: unable to connect to the router wireless D - Link DI-514 when the router Broadcast SSID is set to no. My MAC laptop and HP laptop both work with the set SSID on no. If I change the router Wireless SSID Broadcast is YES, then the printer HP6700 can connect to the wireless router. I set up the printer it saying that the SSID and password have been, the same as both of my laptops, but it connects ever, unless I have change the router to broadcast the SSID. Help!

    Have you tried to update the firmware on the DI-514?

    You can also try to set a static IP address on the printer, and then assign the printer to the list of DHCP static in the interface of the router.
    To give a static IP address to your printer:
    -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
    -Enter the IP address in a browser to reveal the internal settings of the printer.
    -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
    -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
    -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
    -Enter the IP of your router (on the Page of the Network Config) for the gateway.
    -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
    -Click 'apply '.
    Now, stop the router and printer, start the router, wait, and then start printing.

    After that you remove and re - add the printer to your Mac.

    Show support by clicking on the blue Kudos star in the post that solved your problem. Doing so will help the other members of the forum their solutions also.

  • Satellite Pro A10 - WXP re-installed and unable to connect to the internet

    Please help me... I have re-installed Windows XP Home... and now unable to connect to the internet... have also not more of her!
    I went into the Device Manager... in 'other devices' - and it is yellow? mark beside...
    1 / ethernet controller. 2 / multimedia audio controller 3 / PCI modem controller 4 / video...
    They all say "drivers for it are not installed. .... Also, went to "system devices" and find 9 other things that no longer have the drivers installed... said there is also no "audio device" installed!

    My laptop is completely exhausted, or it is better to try to resolve this issue. I'm a fool when it comes to stuff like that... so be gentle with me... what I need to find all the individual drivers and re - install...? BTW... There is no wireless card in the back... (Already checked)...

    Would appreciate any help...
    Thank you

    Hello

    Satellite A10 is a little older model laptop and you can find the drivers in * archives *. go to the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

    Archive-online Satellite Pro-online Satellite Pro A series-online Satellite Pro A10

    > / ethernet controller. 2 / multimedia audio controller 3 / PCI modem controller 4 / video

    Download and install: 1) Lan Card 4) graph of the card sound 2) 3) Modem driver download also, other drivers if necessary.

  • Firefox said it is unable to connect to the net but IE and the signal is strong

    Firefox has been great until this afternoon. Then all of a sudden it gave me an error message that he was "unable to connect." "" The laptop thinks it entirely connected wireless to the Homehub. I have been in contact with BT that kept me in line with IE and say that the problem is with Firefox. I uninstalled and reinstalled Firefox and I'm still getting the message that it is unable to connect. Help, please!
    PS Firefox works perfectly on my desk.

    One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

    Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

    See:

  • Unable to connect to the web services server

    Unable to connect to the web services server.  It is a common error that you might see if you try to enable web services.  If you receive this message, try the following steps.

    For Officejet printers

    1. open the internet browser type printer IP address.

    2 should bring you to the status of the printer page.

    3. Select the tab network at the top.

    4. left side select IPv4 under wireless.

    5. under DNS address Configuration select manual DNS server.

    6. for favorite enter 8.8.8.8

    7. for alternate enter 8.8.4.4

    8. Select apply. You can get a warning saying that this could break the connection which is very good.

    9. turn the printer off for about 30 seconds and then try to enable web services.

    For Photosmart printers

    1. Enter the printer's IP address in a browser.

    2 Select the network at the top of the page.

    3. on the left, select network.

    4. Select Network (IP) address

    5. select manual DNS server

    a. manual Preferred DNS should read 8.8.8.8

    b. alternate DNS server should read. 8.8.4.4

    6. Select apply you could get a fair warning select OK

    I hope this helps!

  • Satellite L650 - unable to connect to the public network (has no valid IP address)

    Hello

    Toshiba satellite L650 laptop computer (with windows 7 64-bit), I bought two days back and I'm unable to connect to the public network. Sometimes, it must be connected to the public network and after a few minutes it disconnects. I get the message "wireless network doesn't have a valid IP configuration him."

    I have visited many forums and did everything, but of no use.

    1. people with disabilities the tcp/ip V6 of the registry.
    2. the DHCP is enabled. With the help of the automatic IP (DHCP)
    3. also tried with a static IP configuration.
    4. uninstalled the antivirus provided with laptop computer (Norton).
    5 disabled the windows firewall.
    6. restored to factory settings.

    I called Toshiba Tech support as well and they have suggested that it may be a problem of H/W but I don't think that so that it can be hardware problem because sometimes he must be connected to the public network. Now I'm left with no option except return the laptop to Toshiba (I'm less interested in this because I know that sending laptop for replacement will be more frustrating).

    Can someone please give some other suggestions for this problem?

    Hey,.

    Can you connect to your home WIFI router correctly?

    If you have problems with the public network connection, you should ask the owner of these networks. Usually, there is always a contact, you can ask if you have any problems with the connection.

    What you can try is updated WLAN driver from Toshiba's official website:
    http://APS2.toshiba-tro.de/WLAN/

    If it doesn't work, ask the person contact I mentioned.

  • Satellite M100-221: unable to connect to the home WiFi AP

    Unable to connect to the home WiFi AP. Impossible to establish connection (when using intel software Bundle, connection hangs on the authentication step.
    When using the connection and windows engine, it connects 3 times will come down on "acquiring network address").

    I downloaded and installed the latest drivers and updates to the BIOS, but it does not solve the problem. Other computers with equivalent settings to connect without any problems.
    Wireless AP DLINK 1000AP + type b Wi - Fi.

    What is the problem?

    Hello

    When I have this kind of problems, sometimes by turning and the AP help.
    Or try to change the authentication or encryption settings.

    Good bye

Maybe you are looking for

  • Look at the symbol when I press cmd R on an Imac

    try reinstalling my Imac, get a lock symbol when I restart the Imac by pressing CMD R

  • Satellite L500-164 - is downclocked map grafik

    Hellomap of this laptop down grafik is timed?and if so, is it possible after the purchase of the laptop to get the card to its full/normal speed?It would be great if someone has an answer! :) THX and sorry for my bad English! ;)

  • is it better to save the photographs digitized as TIFF or JPEG

    I just bought a HP envy 5532 I am scanning in old photos and I would like to have the best resolution the options are TIFF or JPEG - who should I chose? Thank you very much

  • Chaning my email

    So, today, I decided to change my email from Yahoo! in Gmail. "" I changed the email registered with my Apple ID and now when I try to download an app, I type my password and it says: "Apple ID or word password incorrect, please try again." I know th

  • NAS200 records

    Hello! I have a NAS200 (2 x 1 TB HDD) set up by the other guy in stripping Raid (raid 0) It's the folder structure (with read/write access ) public folders size disc is the same with the size of public folders I don't know if one of these folders (pu