"Unable to create a folder of installation" when installing Windows 7 prof

Similar Questions

• SyncToy 2.1 has stopped working, with the message "unable to create the folder pair. Unable to create the provider. Can I get help to fix it please

  After the last automatic update, I tried to back up my files (did this every week for at least one year). Message "unable to create the folder pair. Unable to create the provider"came. I tried again, same. The pair and tried to reset upward. Same message... anyone have an idea how to fix?

  Hi Steve,.

  The question you have posted is related to SyncToy and would be better suited in the SyncFX - SyncToy community. Please visit the link below to find a community that will provide the support you want.
  http://social.Microsoft.com/forums/en-us/SyncToy/threads

  Hope this information helps.

• Error when installing Windows 10

  Hello

  When installing windows 10, it's show error 8007002.

  I deleted temporary files, but its still the same error showing.

  Help, please

  80240020 8007002C 80246007

  1. navigate until "C:\Windows\SoftwareDistribution\Download" and delete the contents of the folder. 2. press on the Windows key + X > click (Admin) command prompt and then type "wuauclt.exe /updatenow. Press enter 3. open Control Panel > Windows Update and Windows 10 should begin to download...

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times and try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Do a clean boot, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both and try the installation again.
  • If you update via Windows Update, when download reaches 100%, disconnect the Internet LAN (Ethernet) or wireless, and proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

    How to: upgrade previous versions of Windows using the file ISO for Windows 10

    How to download official Windows 10 ISO files

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

• G6 notebook pc Pavilion: Hello, I tried to create a bootable USB key to install Windows XP. WH

  Hello
  
  I tried to create a bootable USB key to install Windows XP. When I tried to copy my files to osi XP USB tool of Flashtoboot my laptop suddenly stopped working with some messages of the blue screen and hit up with a screen that is black with the letter 'J '.
  
  I restarted my laptop using the power button, but all the time, I get a black screen with the letter 'J '. When I tried Ctrl + Alt + Del screen will blink for some time and time again I get the same black screen
  
  By pressing the F1 key, I did the test of memory RAM and hard drive memory. Both tests passed successfully. I tried starting the screen remains black local disk.
  
  Product: Model LAPTOP computer: laptop HP pavilion g6
  Product number: QG470PA #ACJ
  
  OS: Windows 7
  
  Thank U
  Look: -.
  EDWARD07Hello,
  
  I tried to create a bootable USB key to install Windows XP. When I tried to copy my files to osi XP USB tool of Flashtoboot my laptop suddenly stopped working with some messages of the blue screen and hit up with a screen that is black with the letter 'J '.
  
  I restarted my laptop using the power button, but all the time, I get a black screen with the letter 'J '. When I tried Ctrl + Alt + Del screen will blink for some time and time again I get the same black screen
  
  By pressing the F1 key, I did the test of memory RAM and hard drive memory. Both tests passed successfully. I tried starting the screen remains black local disk.
  
  Product: Model LAPTOP computer: laptop HP pavilion g6
  Product number: QG470PA #ACJ
  
  OS: Windows 7
  
  Thank U
  Look: -.
  EDWARD07

  EDWARD07

  Hello;
  
  Let me welcome you on the HP forums!
  
  According to your description, my guess is that the program that you used has replaced the boot files on the hard drive, NOT on the flash drive. Thus, your PC no longer starts.

  To resolve startup problems, you need access to a PC for this phase of work in order to create the necessary support to fix your PC boot loader.
  
  You will need to create something called a CD-ROM to repair Win7 - which you could have done for free when Win7 was working.  This will repair the boot loader files, and if that is the problem, your PC will start OK after that.
  
  But now, which can be obtained (with supplement) from this link: http://neosmart.net/blog/2009/windows-7-system-repair-discs/
  
  When you download this file, it will be an ISO file.
  
  To make a CD bootable it, you will need to download and install ImgBurn: http://www.imgburn.com/
  
  Once you have installed, run, select the option "Save image to disk file" and select the downloaded ISO file and that it points to a blank CD.
  
  To make a USB bootable of it, you will need to download and install RUFUS: https://rufus.akeo.ie/
  
  Once you have that, it is executed in the input of the unit, use the drop down menu to select the USB stick.  Near the bottom right, where is written 'Create a bootdisk to aid', select the ISO file downloaded.
  -------------------------------------
  
  Boot from the media that you have created and follow the instructions in this link: http://www.sevenforums.com/tutorials/681-startup-repair.html
  
  You will probably need to run Startup Repair three times for him to fix all the boot loader.
  
  Once completed, your PC should start OK.

  Good luck

• I bought a refurbished HP Elitebook 8440p and I need to create a floppy disk to re - install Windows 7 Pro

  I have a HP Elitebook 8440p.  I bought it refurbished and I need to create a floppy disk to re - install Windows 7 Pro.  Can you help me.  I saw the answers for Dell laptops, but they do not have the Windows 7 Pro X 64 W18-82396

  Can you help me?

  Original title: Windows 7 Pro X 64

  The following article will show you how:

  http://h10025.www1.HP.com/ewfrf/wc/document?CC=it&LC=it&DocName=c01867124

• Windows could not complete the installation. to install windows on installation of HP DV6-7007TX, this restart of the 64-bit computer

  I buy a new HP Pavilion DV6-7007TX. I don't want the pre loaded Windows 7 Home Premium 64 bit that's why I decided to format it using Windows 7 Ultimate 64 bit, but after reboot before the Installtion "filling" to finish an Error Message is displayed "windows cannot complete the installation. to install windows on installation, this restart of the computer", I rebooted several times but the same error pops up

  Why not just do you do an Anytime Upgrade of Windows 7 Edition Home Premium to Windows 7 Ultimate?

  If the license for Windows 7 Ultimate, you have access to is a retail version update or complete, you can use the product key and the Express upgrade to Windows 7 Home Premium to Windows 7 Ultimate. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Ultimate edition at the request, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Ultimate files the stored settings and programs.

• The time machine shaped my result of ssd unable to check my key when installing windows?

  Brief summary:

  My machine: Macbook pro mid 2012
  What I have: Samsung Evo SSD, optical Bay caddy, 8.1 windows bootable dvd with serial
  I wanted to do: install windows in my second internal SSD (optical Bay)
  What went wrong: Enter key I get: "we could not verify the product key. Please check your installation media. »

  I suspect that the problem is: I have formatted by mistake the SSD mac front.

  Question: Has been put in shape my SSD the cause of the problem? and if yes how can I do to reset?

  Detailed long version

  I have a macbook mid 2012 retina not pro that I wanted to have the option to be able to boot from a windows and a mac. As a result, I bought a samsung EVO solid state drive for this purpose. I decided to try the drive and put it in instead of the optical drive caddy the day I got it. I was invited with the message that the mac was unable to acknowledge it and follow a few steps online to format. I would find it later when we look at a forum that I should have left the unformatted SSD. However, I tried to install windows on the EVO by placing the optical drive in the computer, put the EVO in the main Bay. I put the windows cd in and followed the installation. Everything was good until I had to put in the windows key. I put in and received the message "we could not verify the product key. Please check your installation media. "I double checked to see if it was right by voluntarily entering a wrong key he gave me a message that the key was invalid. Snooping around, I tried to reset the drive by using the offer of advanced tools and I was told that windows did not have access to the partition or something of the sort.

  A format the drive of the source of the error and if so is it possible to return to the factory settings?

  All the advice/help is greatly appreciated! Thank you very much!

  The formatting SSD is not related to the issue with the product key. Windows Setup reformats the SSD in the main Bay NTFS still. If the SSD is less than 2 TB, you can format the MBR with attempts as well as FAT32 format.

  Your model is compatible with the installation from DVD and USB, both. You can also download the ISO of Microsoft W8.1 to the https://www.microsoft.com/en-us/software-download/windows8ISO to ensure that your DVD is not a several bits (32-bit and 64-bit DVD).

• Error: "could not create a new partition or locate a" when installing Windows via Boot Camp 10

  This error occurs on my 2012 15-inch MacBook Pro. I have 2 hard drives. One dedicated to OSX and one for Windows. This is my first install bootcamp. I let bootcamp create partitions, but to the partition/disk screen hard to choose, I get a message saying: "we could not create a new partition or locate a.. The partition has been formatted to NTFS. I tried later in this guide community post here: error: "we could not create a new partition or locate and existing" install Windows via Bootcamp 8.1, but no luck. I even tried to delete the partitions and create a partition empty for windows so it can create and format on its own and start using EFI. At this point, windows begins to install it and restart, but it fails during the part material recording and restarts. Then when it starts again I get a message that the installation has failed.

  Here's some output terminal which can help you to (I) hope.

  Blakes-MBP:~ blakeleeper$ diskutil list
  /dev/disk0 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *500.1 GB   disk0
     1:                        EFI EFI                     209.7 MB   disk0s1
     2:          Apple_CoreStorage Macintosh HD            499.2 GB   disk0s2
     3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
  /dev/disk1 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *320.1 GB   disk1
     1:                        EFI EFI                     209.7 MB   disk1s1
     2:       Microsoft Basic Data                         319.9 GB   disk1s2
  /dev/disk2 (internal, virtual):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:                  Apple_HFS Macintosh HD           +498.9 GB   disk2
                                   Logical Volume on disk0s2
                                   27D631AE-27C5-4E4B-98BC-92CE944ED60B
                                   Unlocked Encrypted
  /dev/disk3 (external, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:     FDisk_partition_scheme                        *16.0 GB    disk3
     1:                 DOS_FAT_32 WININSTALL              16.0 GB    disk3s1
  Blakes-MBP:~ blakeleeper$
  

  You must disconnect the internal bus 500 GB SATA drive and use a flashdrive USB2 for OS X from startup. The 320 GB designated drive must be in the main Bay of the Mac. Once Windows is installed, reconnect your 500 GB drive in the Optibay (if you this road main Bay) will be Windows blue screen in most cases.

• Re: Satellite L300-1AP BSOD when installing Windows XP

  I have a new L300-1AP and would like to intall XP Pro but when I try it I get the stop message 0x0000007b.

  Made a new installation disc integrated with all updated sata drivers, I still get the message. I'm not sure about how I would install drivers of third party on the F6 function because it has not a diskette and cany to find how to do the same thing in a CD anywere.

  I appreciate that we should all try to use the vista OS that came with it, but it is a problem of compatibility with older software that I use.

  Can anyone help please?

  In the Microsoft Knowledge Base is an article about it:
  http://support.Microsoft.com/?scid=kb%3ben-us%3B324103&x=17&y=8

  I think that there is something wrong with the SATA drivers. My Satellite L300 works with XP without problems or BSOD when installing.

  The SATA drivers are in this package, and the Intel Storage Manager you can download on the Toshiba site.
  You can create your own installation with nLite (http://www.nliteos.com/) disc.
  If I have integrated the SATA drivers, you do not have to press F6. The HARD drive will be automatically recognized.

• Error 0 x 80070005 when installing Windows Vista service pack.

  Cannot install service packs on vista ultimate. have tried since 3/2009

  Here is the accesscheck running of generated text

  HKLM\software\Microsoft\Windows\CurrentVersion\Component Servicing\Retry Agent of base
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP1-KB936330~31bf3856ad364e35~x86~~6.0.0.18000
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP1-KB936330~31bf3856ad364e35~x86~~6.0.0.18000\InstallCounter

  Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates.

  Please check that you are logged into an account with administrative privileges.

  This problem may be caused by third-party security programs such as firewalls and antivirus software.

  "Please follow these instructions if you are experiencing this error code during checking or install updates via Windows Udpate. What follows applies only to Windows Vista.

  1. Download AccessChk (Sysinternals).  This tool allows you to assess the level of access of some users or groups of resources, including files, directories, registry keys, global objects and Windows services.  Here is the link to download the tool: http://technet.microsoft.com/en-us/sysinternals/bb664922.aspx

  2. save the zip on your desktop and extract the file:
  -Right-click on the file and select extract all...
  -Click Next when prompted for the Destination.

  Therefore, you should see a folder called AccessChk on your desktop.

  3. open the folder AccessChk

  4 press and hold the shift key and right-click in the window.  Select "open here command prompt.

  5. a command prompt window should open a similar message:
  C:\Users\\Desktop\accesschk >

  6. type the following command and press ENTER:
  "" AccessChk.exe "nt service TrustedInstaller" s - n k ' hklm\software\Microsoft\Windows\CurrentVersion\Component Based Servicing "> accesskchk.txt
  Tip: You should be able to copy and paste the command into the command prompt.

  7. close the command prompt window.  Open the Accesschk folder on your desktop (if it has been closed).

  8. double-click on Accesschk.txt (text file), it should open Notepad.

  If this is insufficient,

  1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:
   
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads
  SubInACL (SubInACL.exe)
   
  2. go to your desktop and double-click on the downloaded file.
  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.
  4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
  5. copy the following commands, and then paste them into the opened Notepad window:
   
  off @echo
   
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = system = f
   
  @Echo =========================
  Completed @Echo.
  @Echo =========================
  @pause
   
  6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.

  7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".

  8. you will see a window of type BACK treatment.
   
  NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

  Note: On some driver update installation procedure, we also received this error code, please redirect this kind of case to the Team System Vista, because it can be considered for structure of third-party programs.

  Look for updates after that.

  Hope this information is useful.

  This problem may be caused by third-party security programs such as firewalls and antivirus software. You can disable or remove to check the issue.

  From: Microsoft Answers Support Engineer
  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads "

  My notes - TaurArian [MVP] 2005-2011 - Update Services

• Partitioning of the problems when installing Windows 7

  I have a HP Compaq CQ58 supplied with Windows 8. I switched to Ubuntu and I'm doing a clean install of Windows 7. Installation came at a prompt asking "Where do you want to install Windows?" and I have three partitions:

  Disk 0 Partition 1 - 94.0 MB system
  Disk 0 Partition 2-296, 4 GB primary
  Disk 0 Partition 3-1, 6 GB primary

  When you select one of them, I get "Windows cannot be installed to Partiion Dis 0 x." On the 1 (System) partition, the details are:

  Windows cannot be installed to this disk. The selected disk is the GPT partition style.

  Windows cannot be installed to this hard disk space. The partition is a partition of EFI (ESP) system.

  On Partition 2 (primary), the details just say:

  Windows cannot be installed to this disk. The selected disk is the GPT partition style.

  And on the Partition (primary) 3, tell the details:

  Windows cannot be installed to this disk. The selected disk is the GPT partition style.

  Windows cannot be installed to this hard disk space. Windows must be installed on a partition formatted in NTFS.

  Windows cannot be installed to this hard disk space. The partition is of an unknown type.

  Well, I had nothing in particular requiring a backup (it is a computer of leisure, all of our important data are on other devices), then I hit the "Format" button on all three in turn try to get the installation to run on one of them. If any OS at this point is completely erased. I need to know, now, what to do. I'm not comfortable with my computer knowledge to go and delete partitions without professional opinion. I'm not used to have more than one partition and wouldn't mind consolidating unless HP has good reasons to keep them separate.

  Hello

  There is no reason to keep these partitions and you can remove them using the disk management on the following installation disc.

  Left click a partition for highlight.

  Click the blue link "drive Options (Advanced).

  Select the option 'delete '.

  Repeat this step for each partition listed.

  Once completed, you should see only 1 entry showing that "the unallocated space on disk 0.

  Click on the button 'Next' operation of installation of Windows 7.

  Be aware that Windows 7 will also create a "System" of about 100 MB hidden partition that contains the files and start the recovery environment.

  Kind regards

  DP - K

• Dell Inspiron M5030 black screen when installing Windows 8.1 on 'Get Ready devices.

  Dell Inspiron M5030

  I had Windows 7 installed and works perfectly, but I wanted to install Windows 8.1, I tried a new install first (also tried to upgrade to windows 7). Everything installs fine but when it restarts for the first time the windows logo appears and 'Getting devices % ready' then the screen goes black.

  Ive tried:
  -For let sits for awhile to see if it comes back, and I get nothing after hours
  -J' plugged a monitor without response (also tried to close the cover put to sleep and go to bed)
  -J' quit and tried to start in Safe Mode, but it says that Windows cannot boot mode safe because windows setup has not finished

  I can start on my windows repair and go to the recovery prompt but don't know what to do. It looks like a video driver issue, the laptop has an AMD Radeon HD 4200. If thers any why to install the driver before implementation ready devices? Help, please!

  I had the same problem and did this and it worked without problems... The idea is to integrate the drivers updated in the ISO/DVD. The drivers supplied with the W8.1 DVD do not work as well as I was getting the BSOD with the installation.

  1. download Winreducer and install all the 3rd party software that it requires.  Look in the howto.pdf

  2. download the latest AMD Catalyst drivers from AMD website (not beta).  Drivers Windows 8, I think that the list.

  3. extract the files to temp dir.

  4 copy files and drivers since the temp (packages\drivers\display\w86a_inf) directory and the sub (B149756) to the dir dir drivers winreducer (work\integrate\drivers\x64).  In the x 64 dir, you should have cats, msi, INF and the b149756 files.

  5. run winreducer.  Make sure you have practice an iso to DVD Windows 8.1.

  6. Once you mount your iso, you will spend for options and features screen.  You can see the presets, appearance, features... on top.   Let alone all the options EXCEPT the location of the drivers under System.  Change this to x\WORK\INTEGRATE\DRIVERS\x64.  Don't forget to change the x to your location.

  7. click on finish.  Save as an iso. Apply.  It will save the iso changed in the winreducer folder.

  8 burn and install.

  9. After you are done installing, install the driver package that you downloaded in step 2 by running setup.exe in the main dir.

  10 thank me LOL

  It worked for me on an Inspiron M5030.  I hope that my answer is detailed enough.

• Satellite A100-002 - freezes when installing Windows 7

  Hello

  I have 1. Satellite A100-002 and 2. big problem with the installation of Windows 7.

  2 years ago I tried to install Wista - but it froze during installation, whenever I tried. of course, I tried different versions of Wista.
  Once I managed with installation - but he keep gel al the time - immediately after departure.
  so I gave up - and I'm back to XP

  now I'm trying to install Windows 7 and again the same problems :(

  can someone tell me whats wrong? -a really need him.

  Thank you very much

  Hello

  When the laptop just hangs?

  In addition you using SATA drivers or install it in compatibility mode?

• Satellite A300 BSOD when installing Windows XP

  Bought a new Satellite A300 that ships with Vista and a load of other rubbish.
  Set the BIOS to boot from the installation CD of Windows XP, but just after loading the drivers and files and just before
  from Windows XP installs, crash with blue screen advising me:

  A problem has been detected and windows has shut down to prevent damage to your computer,
  blah, blah. In other words blue screen of death that ends with this message - STOP: 0xF78D2524, 0 x 00000000, 0 x 00000000

  Now, I've had quite a few machines over the years, but never something like that before you encounter when you try to
  install an operating system.

  Any advice appreciated, otherwise unit will have to go back to the seller.

  Thank you

  Joe

  Access the BIOS-> SATA mode choose and is compatible-> save the changes and exit the BIOS.
  Then try to reinstall Win XP with SP2.

• Error: 0 x 80280006 when installing Windows Movie Maker 2.6

  I still get and error message error: 0 x 80280006 when you try to install Windows Movie Maker 2.6. The information indicates that

  the codec has not been installed because the box options has not been verified before downloading program.  I have not yet found none

  options box.  I used Windows Movie Maker on Windows XP on a computer with a 32-bit system earlier, but have not been able to

  install on Windows 7 on this 64 bit laptop.

  Windows Movie maker 2.6, is NOT a "new and improved" program

  On the contrary, the 2.6 version is just a "watered-down" version It is used for some Vista computers that are unable to support its native version of 6.0 integrated which, in my opinion, is the best version of Windows Movie Maker.

  2.6 is compatible with Windows 7, but why waste your time when Win 7 can have Windows Live Movie Maker that is intended for Windows 7?

  Please don't waste your time at the 2.6version facility.

  Install Windows Live Essentials 2011 which includes Windows Live Movie Maker.
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-essentials

  Note: it is a Windows Live Essentials 2012 available, but I don't know if it's a "Beta" or a final version. I installed it and it seems fine.  WLE 2012 also includes Skydrive in the package.