Unable to create the new network former TC

Hello

So I have the current generation of TC acting as a router as well as a HDD on my old to wide wireless broadband. I experienced some problems with connectivity recently (where my MacAir shows that I am connected to the internet, but no matter what site I try to access everything simply does not load and ends up with a progression of Ribbon on the address bar of Safari-turn off and turn on the power back constantly solves the problem), but this is not what I am asking today. Recently, I had the new optical fiber internet for my house and got a new modem and everything has been installed. Only one of the four ports in the modem seems to work, but at least it works. The D-link router that came with it works fine, but I want to use my TC as the router instead. However, whenever I connect the TC on the working port, I am unable to connect. Airport utility, the lights of TC in green but 'Internet' is yellow, i.e. does not work correctly. It should be a problem with the TC because the D-link router works on the same port and connection ethernet via a thunderbolt on the same port adapter works perfectly fine as well.

Is this a problem with the old settings on my TC being incompatible with the new network? Please advise, thank you very much!

There are at least 2 different issues at stake here and possibly 3.

A question is that whenever you change the modem or the router that connects the TC, or your provider of Internet services, the TC must be reset back to settings by default, and then set it up again to work properly with the new product and the new service.

You don't mention how old your 'old' Time Capsule can be, but 3 years is on the average life of the time Capsule, if anything more than 3 years will be suspicious where reliable operation.

The third possible cause is that only a single port of your modem/router works when the four should work. If this is a real problem here, we can't say, but you have to wonder a little about the reliability of a product that doesn't seem to work properly

Tags: Wireless

Similar Questions

  • Unable to create the new project for the new society without existing systems

    I'm unable to create a new project for a new society.   There is no existing systems, and I can't go beyond the selection screen.  I first put in place a new collector, registration of the database and start collections?  Or y at - there a step I'm missing?

    I found my problem.  I've been using Firefox.  This works fine in IE.  Problem solved.

  • Unable to create the new folder. Jaymze

    Windows 7 Edition home premium 64-bit

    I need to create the new folder for recording of images and music files but when I click on "NEW FOLDER" nothing happens.  When I right click on the desktop in the drop top NEW is there but still once, nothing happens.

    Jaymze

    You have installed chrome? It's looking like a recent update of chromium may be the cause. Here are two patches.
     

    How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
    http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html
     
     
     
    Tip: When you save the text in Notepad, the default file format is .txt. Replace all files.
     
     
  • Unable to create the new domain file

    Hi experts

    I am trying to create the new domain file, but there is no success.

    Tools-> domain Administration > file-> Select

    When I choose, the dialog box open typed the new name for file field, you click Open.

    the error message is "mydomains.xml is not a domain file.

    Please tell me how to create the new domain file where you will store the areas associated with my project.

    Thank you

    Hello

    With the dialogue of the Administration of the areas, you modify xml with the areas. You cannot create a file or assign the file with the fields in given the design from there.

    Documentation:

    SQL Developer Data Modeler does not include the default domains file.

    To create new field definitions, select Tools > areas of Administration and click Add to create and add your own domains. These areas are added to the default value of the file, defaultdomains.xml, and can be used for all your projects.

    The file is located in /datamodeler/types/defaultdomains.xml

    Basically, you should

    1. create /datamodeler/types/defaultdomains.xml if it does not already exist

    See Tutorial: modeling of data for a small database

    2. create some (open) design and import file fields to file-> import-> areas

    3. after that study is registered again Directory /domains with design level domains file inside the tree of creation will be created.

  • Unable to create the new project Windows Digital Image in 2006.

    Original title: Digital Image 2006 Windows?

    My operating system is Windows XP SP3.  I have installed Windows Digital Image 2006 but when I clicked on "create a new project" he has opened with a page containing a red X, calendar, frog and a butterfly, and I was unable to go further.  It is a good editing software, but I would like to be able to use all the facilities.

    If someone familiar with this program, please indicate what could be the problem and how I might be able to correct even.

    Thank you.

    Look at the link here because it says Microsoft Digital Image 2006 is not compatible with Windows 7.
    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=Windows%20Digital%20Image%202006

    If the program is not compatible, then you try to install and run the program in compatibility mode.
    Use the following steps:
    (1) right click on the program
    2) click Properties
    3) click on the Compatibility tab
    (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

    Check out the link here: make sure to run older programs in this version of Windows
    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

    If compatibility is not successful, then try and run the program compatibility problems:

    If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

    If you run Windows 7 Home Premium, try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other 3rd party software virtualization and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

    Thank you

    Marilyn

  • Unable to create the new tab using '+' or ctrl T or the drop down menu.

    By clicking on '+' in the tab bar, using ctrl T or the drop down menu of the file menu new tab does NOT create a new tab. New tabs created only if clicking a link creates one.

    Uninstall the toolbar Ask and it should work again. There is a compatibility issue with the Ask and Firefox toolbar that prevents the opening of new tabs.

  • Unable to create the new folder using Vista Home Premium 32-bit.

    It is on a Toshiba laptop which is about five years old.

    Explorer

    Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

     

    To see if a fix is available

    In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution.

    You can also right-click and choose Details for more information. Post these details here. The name of the Module fault is important information.

    If the problem affects Panel press the Windows key + R and type wercon (or type it at a command prompt).

     

    Close the browser and start a command prompt

    About any what Explorer windows Start - All Programs - Accessories - right click on command prompt and choose run as administrator. Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer. Press Ctrl + Alt + Delete then Task Manager.  Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.

    Then to restart the Explorer after trying all of the following

    Press Ctrl + Alt + Delete and choose Task Manager from the Task Manager click the menu file then the new task (run) , type explore

     

    If you cannot start the Explorer at all

    Press Ctrl + Alt + Delete and choose Task Manager on the processes tab, click Show processes from all users to elevate to administrator in Task Manager, click the file menu then the new task (run) and type cmd other things you can try typing

    Explorer
    Explorer c:\
    Explorer/e, c:\
    wercon
    control
    Iexplore

    If you cannot start a folder window you can use the Browse button in the new task dialog. Don't forget that you must right click and choose Open rather than double-clicking.

     

    Reregister the shell registry entries

    It is important that each order is accepted. If the command fails it means the file is damaged and must be repaired.

    Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

    regsvr32 /i shell32
    regsvr32 /i urlmon.dll
    regsvr32 RPCRT4.dll
    regsvr32 PROPSYS.dll
    regsvr32 MSCTF.dll
    regsvr32 cscui.dll
    regsvr32 rsaenh.dll
    regsvr32 timedate.cpl
    regsvr32 ATL DLL
    regsvr32 OLEACC.dll
    regsvr32 actxprxy.dll
    regsvr32 USERENV.dll
    regsvr32 msshsq.dll
    regsvr32 NaturalLanguage6.dll
    regsvr32 thumbcache.dll
    regsvr32 WINTRUST.dll
    regsvr32 MMDevAPI.DLL
    regsvr32 audioses.dll
    regsvr32 audioeng.dll
    regsvr32 ExplorerFrame.dll
    regsvr32 msi.dll
    regsvr32 FirewallAPI.dll
    regsvr32 netshell.dll
    regsvr32 pnidui.dll
    regsvr32 QUtil.dll
    regsvr32 c:\windows\system32\wpdshserviceobj.dll
    regsvr32 WINHTTP.dll
    regsvr32 C:\windows\system32\qagent.dll
    regsvr32 C:\windows\system32\portabledeviceapi.dll
    regsvr32 wbemprox.dll
    regsvr32 wbemsvc.dll
    regsvr32 fastprox.dll
    regsvr32 imapi2.dll
    regsvr32 wshext.dll
    regsvr32 gameux.dll
    regsvr32 msxml6.dll
    regsvr32 vbscript.dll
    regsvr32 jscript.dll
    regsvr32 wshext.dll
    regsvr32 wshom.ocx
    regsvr32 wshcon.dll
    regsvr32 scrrun.dll

     

    Delete folder settings

    Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

    Reg delete "HKCU\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell" /f

    Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams" /f

    Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StuckRects2" /f

    Delete the thumbnail and icon Caches

    Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

    attrib - r s h '% userprofile%\AppData\Local\*.db '.

    del "% userprofile%\AppData\Local\*.db".

    Disable thumbnails and previews

    Damaged documents and particularly corrupt pictures or videos, can cause Explorer crash all trying to generate a thumbnail or an overview. This miniature and previews active option off.

    If you can start the Explorer, previews is Union on the command - folder and Search Options - framework of tasks use classic Windows foldersbar.

    Thumbnails are organized on the command bar - folder and Search Options - view tab - and check under Advanced settings - always show icons, never thumbnails and uncheck Show icon file in the pictures.

    If you cannot start the Explorer close Explorer as above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

    Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000001 f

    Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000000 f

    Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000000 f

    Turn around after testing the Explorer.

    Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000000 f

    Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000001 f

    Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000001 f

     

    A boot is a way to explore

    It can be caused by a shell extension.

    Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

    The Explorer is built on addin programs called Extensions of Shell. The standard is provided by Microsoft, but programs add their own.

    Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx close the windows Explorer Start Autoruns by right-clicking and choose run as administrator , click Options menu - Filter Options and check hide Microsoft entries and claire include empty slots to go to the Explorer tab and uncheck everything to the left. Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer. Press Ctrl + Alt + Delete and choose Task Manager.  Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list. Click the file menu and then click new task (run) and enter explorer

    If it helps, re-enable one by one to identify the who.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see problems explore

    http://support.Microsoft.com/mats/windows_file_and_folder_diag/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to your hard drive. It will contain all 27 FixIt.

    Recycle Bin
     
    If the problem is the trash bin remove the storage folders. It will be automatically re-created next time you delete a file or open the Recycle Bin. It will remove the trash and the files it contains for all users.
     
    Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
     
    RD C:\$RECYCLE. BIN/s/q
     
    then repeat for each drive to change the drive letter, for example
     
    d:\$recycle Rd. BIN/s/q
     
    e:\$recycle Rd. BIN/s/q
     
     
    If the Office does not start
     
    This will create a new empty by user and common desktop computer. This will allow to test if a file on your desktop to start the Explorer.
     
    Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
     
    MD "% userprofile%\DesktopTest".
     
    Add reg "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% USERPROFILE%\DesktopTest"
     
    MD "% public%\desktopTest".
     
    Tracking Add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v "Common Desktop" /t REG_EXPAND_SZ /d "% Public%\DesktopTest".
     
    To restore default after having tested if begins to explore.
     
    identifying add / REG_EXPAND_SZ /d "% USERPROFILE%\Desktop" office t/v 'HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders ".
     
    Tracking Add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v "Common Desktop" /t REG_EXPAND_SZ /d "% Public%\Desktop".
     
    You will need to disconnect then.
     
     
    Type in a command prompt
     
    Reg query HKEY_CLASSES_ROOT\Folder\ShellNew/s
     
    and paste the results here.

  • Unable to create the new file or change exisiting Movie Maker file

    original title: Director

    My hard drvie was replaced under warranty by Dell. Before that happened, I backed up all my files, including holiday movies I made with Windows Movie Maker.  The new hard drive had Windows Vista pre installed on it. I downloaded all my backup files and everything seemed to work.  However, in making a new movie with Windows movie maker or by modifying an existing movie file, I couldn't create a new folder in the collection.  When I open the file in the top of the page it shows to create a new icon collection file, but its hidden.  bottom line, when I try to click on it nothing happens?

    William D

    My hard drvie was replaced under warranty by Dell. Before that happened, I backed up all my files, including holiday movies I made with Windows Movie Maker.  The new hard drive had Windows Vista pre installed on it. I downloaded all my backup files and everything seemed to work.  However, in making a new movie with Windows movie maker or by modifying an existing movie file, I couldn't create a new folder in the collection.  When I open the file in the top of the page it shows to create a new icon collection file, but its hidden.  bottom line, when I try to click on it nothing happens?

    William D

    =================================================
    I'm guessing that you saved the. MSWMM Movie Maker project files?

    The problem is that the. MSWMM project file does not include your
    source files... (Photos, video clips, Audio clips)... and without the
    the original source files you have nothing to work with.

    To start a new project... try to go on... File / import into collections... and
    Navigate to the files you want to import.

  • Unable to create the new folder. File system 512 error.

    Hello

    I was not able to create new folders in my pictures public library recently. Whenever I do, I get a message from file system error 512.

    A forum sponsor said that Windows 7 had a limit of cable of 50 folders under the images. Even though I've had 61 cases, which kind of contradict that response, I went before and tidy up until now I have only 39 files directly under the images. However, the problem persists.

    Just for the record, I also did a registry cleaning, obviously have restarted, etc.

    Any ideas out there would be more appreciated.

    Hello

    Did you changes to the computer before you encountered the problem?

    Check if you are able to create a new folder in the library of images in safe mode. To start in safe mode follow the link given below.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Unable to create the new folder

    When in the documents, I can't create a new folder. ? All other functions work, but not new folder. When I click on it that nothing happens, when I click on burn disc, then the door opens. I'm completely confused. Thank you

    Do, or you have installed Chrome? It appears that an update of Chrome, (mid April 2013), is responsible for the loss of the option new folder. Even if Chrome has not been installed, here are two patches.
     

    How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
    http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html
     
     
    If for any reason, the zip file doesn't work for you, check out the 'response' by Linda Yan in this thread.
    http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf/#99395761-56de-4a76-8C2A-eab498ad735a
     
     
    Tip: When you save the text in Notepad, the default file format is .txt. Replace all files.
     
     
  • Unable to create the new folder, allows only new Briefcase

    my request to create a new folder allows only a Briefcase.  I want to create a standard folder.

    How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
    http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html
     
     

    Tip: When you save the text in Notepad, the default file format is .txt. Replace all files.
     
     
  • Unable to create the new workspace

    Dear community,

    in a new configuration 5 APEX instance of Oracle 12cR1 I get the error message "error TEST_WS commissioning. ORA-20001: ask 1691638015598602 could not be processed. PROVISION_COMPANY ".

    As part of the work, I've also configured to create a new scheme. The names are not yet used on the database.

    The error message is not helpful at all. Do you have tips how to get more details about the error message?

    see you soon,

    Alex

    I could find the cause of the error. The password provided for the creation scheme has no meat required complexity rules. As a result, I got this strange error msg.

  • Unable to create the new color chart

    Hey everybody,

    I use Lynda learning Illustrator and other programs.
    I am now in Chapter 4 and I need to select a shape, and then create a new shade.
    However, I can't click on create new shade while the guy in the RCA video lynda.

    What should I do?

    Here are a few screenshots:

    Me:

    Me.png

    Lynda:

    lynda.png

    Your race (transparent) is in the foreground instead of blue fill. Press the X key to blue fill in the foreground, and then click the new swatch.

  • Unable to create the new database server

    I keep running into these fundamental questions before starting even with the integration work.

    I tried to create a new topology-the physical Architecture-> Technologies > data server. But when I try with the right button on any of the technologies, I get no response. The window is not to me for some strange reason. If I right click on Technolgies, ODI invite me to create new or to import technologies.

    rAnyone had this problem before?

    See you soon

    I think you have some problems of java. JRE 6u23 works very well.

  • Unable to create the new folder. nothing happens when the folder icon is selected

    When I click on the new folder option in the menu bar nothing happens.  a zip file is the only choice with right click

    You have installed chrome? It is an update of Chrome, (mid), is responsible. Here are two patches.

    How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
    http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html

    If still no joy, see the 'response' by Linda Yan in this thread.
    http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf/#99395761-56de-4a76-8C2A-eab498ad735a

    Tip: When you save the text in Notepad, the default file format is .txt. Replace all files.

Maybe you are looking for