Unable to determine the type of AC power adapter. Your system will run more slowly and the battery won't charge.

Similar Questions

• My laptop is plugged in, but the battery won't charge

  Hello

  In the last two months, capability of my laptop to charge its battery has degraded.
  She went to a battery completely (100%), not being able to load beyond 98% and then 66% and 30%, and now finally, it says "0% availability (plugged in, charge)", but it never increases support.

  Thus, the laptop works when plugged into the charger, but does not illuminate when it is attached only on the battery.

  I rebooted the computer several times - first to stop the machine, then unplug it, remove the battery, press and hold the Start button for a minute, then put the battery back, plug the charger in and rebooting the machine.

  I installed updates for "Stacks" (IE. Microsoft AC adapter, compatible ACPI Microsoft control method battery and battery Composite Microsoft) in Device Manager.
  I also uninstalled the Microsoft ACPI complaint method stack and shutdown and restarted the laptop several times.

  Earlier I called Toshiba support and update the BIOS of 1.50 to 1.70, then restarted the computer, but yet again, the battery won't charge.

  I bought a new battery, which showed that it was fully charged when when I have attached to my laptop, but when exhausted 0% load, I got the same message as for the other battery: "0% availability (plugged in, load).

  I am really puzzled. If not, how can I try to increase the capacity of my laptop battery?

  In my opinion, old battery was certainly defective.
  Is your new original battery, Toshiba battery or any part of third-party product?

  When you start Notepad without battery and put in place when Windows is loaded does the problem persist?

• Pavilion g6t-2300 CTO select: seeing power HP Pavilion is still on even after closing down and the battery won't charge no - 10 Windows

  My HP Pavilion power LED is still even after closing. I disabled option quick start, but the problem was not fixed. Another problem is the battery will not charge if it is showing connected. My OS is wondows 10. Please help me. Thank you.

  Hello

  Please try the following fix:

  https://www.CNET.com/forums/discussions/help-my-PC-with-Windows-10-wont-shut-down-properly/

  Kind regards.

• My satellite phone battery does not light and the battery won't charge (rest on 2%)

  Basically, my laptop is 3 months old and I don't know why it's acting weird. First of all, when I bought the laptop in June 06... the first week the laptop has no power in battery mode. So I stopped using the battery mode and still had to use my power adapter to power my laptop.

  Now 4 weeks later, I removed the battery to the rear and put again. Guess what the battery started working. Now 2 months later the same problem occurs, only that this time after removing the battery to it still turn on and the battery says 2% and also fails to load.
  So I m stuck with my son again... can anyone help?

  Hello

  In my opinion the best solution is to confront your local dealer with this problem. If I were you I wouldn't waste time. Unit is fairly new, warranty still valid and unit should operate.

  Perhaps is there some problem with electronic supply power.

• Equium M50 - the battery won't charge

  Hi, I need some advice on a problem of load on my PC.

  Battery does not charge and the level indicator shows a constant 5%.
  The machine is about 15 months old and does she not get hard usage, probably an average of 5 to 10 hours per week. Usually, it is powered by the sector, so the battery tends to be kept filled to the top.
  Before I go and replace the battery, y at - it no diagnosis, I can do as a user?

  Looking forward to a response.

  Thank you very much
  Steve

  Hello

  No, I think Don t that it is meaningless to make a diagnosis because it sounds like a hardware related issue and I think that it would be preferable to bring your machine to a service partner chartered for a checkup of material, or probably an exchange of defective components.

  To find the nearest available in your country service partner, you can try this link:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good luck and good weekend
  Welcome them

• has ran battery optimizer, and now the battery won't charge

  Old ze4100 HP laptop running XP Service Pack 3

  you will probably need a new battery

  If you want the best performance for a battery, you must set its memory

  full charge, then dump complete, again, and again, three times, then you will have a full brief on the battery,

  also, if you are going to be on the current for an extended period, I read that you should take the battery, but I can't guarantee it.

  I do not think that an optimizer will do anything for a battery, but that's my opinion :)

  http://www.Google.com/#gs_rn=16&gs_ri=psy-AB&suggest=p&CP=13&gs_id=11&XHR=t&q=HP+battery+will+not+charge&es_nrs=true&PF=p&BIW=1024&BiH=559&sclient=psy-AB&OQ=HP+battery+Wi&gs_l=&PBX=1&BAV=on.2, or.r_qf. & bvm = bv.47534661, d.dmg & fp = e20a34a9644e4d30

  above is to search google for the battery support, hp, you can browse the net and find a solution.

• Your laptop is plugged in and the battery won't charge. __

  MY LAPTOP WILL ONLY START WHEN CONNECTED TO THE UNIT FROM THE WALL BUT NOT SE LOAD AT ALL. I HAVE ATTEMPTED TO LOAD A NIGHT & STILL NO CHARGE WHAT SO EVER. WHAT CAN I DO TO FIX THIS? WHAT IS MY HARDWARE?

  The battery would be my first guess that the PC works directly on the charger - but it could also be the program to load the battery and connections.  Remove and replace the battery to make sure that the connections are solid.  If you have another battery (or access to another battery, you can try to see if the problem persists or if he disappears - then you will be very well known.)  In any case, if this is not possible, I recommend that take you it to a repair shop computer (or return it to the manufacturer) for the diagnosis, repair or replacement.

  I don't know any way to test this situation without special equipment or replacement parts.  You can always try to re - install the operating system to rule out a software problem (if you want to do business with what this implies in terms of data backup and reinstall applications and reconfigure the settings and others).  Without info on the manufacturer, brand and model (and operating system), I can't help you more in this option.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to determine the battery capacity

  Hey guyz m not able to detect the device battery capacity according to the (documentatiom)

  For my Volt application, I use battery.h BPS, there is battery_info_get_battery_full_charge_capacity(), but you should not trust this value based on my experience, it always points to 80000, which is the value for BATTERY_INVALID_VALUE. Instead, use battery_info_get_battery_design_capacity() but be warn that it will return the size of the normal battery for the device. So, for a Z10 with an oversized 3800mAh battery, it will return 1800 (size of battery default Z10).

  https://developer.BlackBerry.com/native/reference/core/com.QNX.doc.bps.lib_ref/topic/battery_info_ge...

  Nominal capacity is not available to BatteryInfo class.

• Then the loop or VI runs more slowly, and then demanded

  Hello LabVIEWists,

  I developed a small VI for the monitoring and recording of data. Unfortunately, the while loop, I use to ask for samples of each iteration is not execture as fast I asked by placing a hold until the next ms VI. Even if I change the time of 100 ms to 10 ms, execution speed does not change.

  Anyone has any idea why?

  

  File IO is generally slow.  One thing you could do to speed to the top of your loop is to move the screw of file spreadsheet reading out of the loop and use autoindexing to iterate through your columns.  You should probably use Transpose table 2D to the index on the size you want.  Also, you loop must be a loop FOR.

• Unable to determine the type of AC power adapter. Dell Inspiron 1545.

  Hi all

  Just recently I started receiving the error message bad "cannot determine the type of AC power adapter. Your system will run more slowly and the battery won't charge. "Please connect a Dell 65W adapter or higher for a better functioning of the system.

  I've had my dell inspiron 1545 since 2009. I had to replace my battery once because I kept getting an error message. The error message above, I have been doing hard for about a week now. I had read that push the cord into the laptop could work. I know it sounds stupid, but I actually tried and for some time the adapter started to charge my battery again. But whenever I turn off my laptop I have to re connect the adapter because I get this error again. About 2 days ago, I tried my usual method of shoving the cord, but now the method does not work and my battery fell to 18%. I must say that I always keep my plugged power cord because my battery never lasted more than an hour before.  It seems that my card still works when I plug it into the wall of blue light still appears. When I plug it into the laptop computer, the icon appears that it is plugged in and the display becomes brighter. I am also able to remove my battery and work on my laptop as long as the AC adapter is plugged. I'm really afraid that this problem is related to the motherboard.

  Any ideas?

  Thanks in advance.

  First thing to try is a new Dell AC adapter - if this doesn't fix the problem, replace the power supply (see link below).  And in the unlikely event, he is not taking or adapter, the motherboard needs to be replaced.

  www.Parts-People.com/index.php

• (plugged in, load) but the battery is not charging

  Hello!

  I have a problem with my hp laptop Pavilion dv6 - 2190ev.

  The laptop cannot start if the charger is connected only (and the battery). It will only start if the battery is on. Also, the led and the laptop displays: (plugged in, load) but the battery won't charge!

  The battery and charger are ok, because I tried on another laptop and work there!

  So, the problem seems to be on the laptop. I also update the BIOS and the problem persists.

  Can someone help me solve this problem?

  Looks like you did a few good troubleshooting at this point.  One thing which is ofter overlooked in these questions is the motherboard.  Here is an article by HP, battery not power Notebook or hold a Charge.

  Please take a look.  There are suggestions for troubleshooting for the power supply, motherboard and battery, as well as links to other useful information. I'm sorry this isn't a simple solution, but you could just find very useful information in the article.

  Good luck with it,

• Unable to determine the current location by this time El Capitan

  Hello.

  Recently, I have this problem with my Macbook pro. I turn on location services, as you can see...

  ... but my computer is unable to determine the current location in the date and time. Cards and find my mac are not also work more.

  

  Currently I have version 10.11.5 of El Capitan. It happened from one day to another, I don't update the software or anything like that.

  Thank you

  Edgar Lopes

  Turn on Wi - Fi for the information about the location.

• I'm unable to determine the correct HP Quick Web access to fast Internet security key

  I am unable to determine the correct HP Quick Web access to fast Internet security key?

  Hello

  You need to contact HP support, their documentation online and ask in their forums than
  is not a problem of Windows or Microsoft.

  These should help:

  Install and use the Applications HP QuickWeb
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02043846&cc=us&LC=en&DLC=en

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• OIM 11 g R2-code Client - JRF is unable to determine the current application

  Hello
  
  I'm asking a resource via an API by using the client program, I face below question when I run the client program:
  November 17, 2012 20:56:35 < clinit > oracle.iam.platform.context.ContextManager
  GRAVE: IAM-0030002
  oracle.jrf.UnknownPlatformException: JRF is unable to determine the current application server platform.
  at oracle.jrf.ServerPlatformSupportFactory.getInstance(ServerPlatformSupportFactory.java:79)
  to oracle.iam.platform.context.ContextManager. < clinit > (ContextManager.java:77)
  at oracle.iam.platformservice.api.ClientLoginSessionServiceDelegate.loginSessionCreated (unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  to Thor.API.Base.SecurityInvocationHandler$ 1.run(SecurityInvocationHandler.java:68)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  at weblogic.security.Security.runAs(Security.java:41)
  at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs (weblogicLoginSession.java:52)
  at Thor.API.Base.SecurityInvocationHandler.invoke (SecurityInvocationHandler.java:79)
  to $Proxy1.loginSessionCreated (Unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at oracle.iam.platform.OIMClient.loginSessionCreated(OIMClient.java:291)
  at oracle.iam.platform.OIMClient.login(OIMClient.java:215)
  at oracle.iam.platform.OIMClient.login(OIMClient.java:197)
  to comp.iam.oim.client.Client. < init > (Client.java:37)
  to comp.iam.oim.client.ClientRequest. < init > (ClientRequest.java:24)
  to comp.iam.oim.client.RequestResourceCreate. < init > (RequestResourceCreate.java:44)
  at comp.iam.oim.client.RequestResourceCreate.main(RequestResourceCreate.java:57)
  Exception in thread "main" oracle.iam.platform.utils.NoSuchServiceException: java.lang.reflect.InvocationTargetException
  at oracle.iam.platform.OIMClient.getServiceDelegate(OIMClient.java:279)
  at oracle.iam.platform.OIMClient.getService(OIMClient.java:256)
  to comp.iam.oim.client.ClientRequest. < init > (ClientRequest.java:25)
  to compiam.oim.client.RequestResourceCreate. < init > (RequestResourceCreate.java:44)
  at comp.iam.oim.client.RequestResourceCreate.main(RequestResourceCreate.java:57)
  Caused by: java.lang.reflect.InvocationTargetException
  at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)
  at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
  at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
  at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
  at oracle.iam.platform.OIMClient.getServiceDelegate(OIMClient.java:275)
  ... 4 more
  Caused by: java.lang.NoClassDefFoundError: org/eclipse/persistence/indirection/ValueHolderInterface
  at java.lang.Class.forName0 (Native Method)
  at java.lang.Class.forName(Class.java:169)
  to $Proxy4. < clinit >(Unknown Source)
  at sun.reflect.GeneratedSerializationConstructorAccessor23.newInstance (unknown Source)
  at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
  at java.io.ObjectStreamClass.newInstance(ObjectStreamClass.java:924)
  at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1736)
  at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1328)
  at java.io.ObjectInputStream.readObject(ObjectInputStream.java:350)
  at weblogic.utils.io.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:208)
  at weblogic.rjvm.MsgAbbrevInputStream.readObject(MsgAbbrevInputStream.java:599)
  at weblogic.utils.io.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:204)
  at weblogic.rmi.internal.ObjectIO.readObject(ObjectIO.java:62)
  at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:243)
  at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
  at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
  at weblogic.jndi.internal.ServerNamingNode_1036_WLStub.lookup (unknown Source)
  at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:424)
  at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:412)
  at javax.naming.InitialContext.lookup(InitialContext.java:392)
  to org.springframework.jndi.JndiTemplate$ 1.doInContext(JndiTemplate.java:132)
  at org.springframework.jndi.JndiTemplate.execute(JndiTemplate.java:88)
  at org.springframework.jndi.JndiTemplate.lookup(JndiTemplate.java:130)
  at org.springframework.jndi.JndiTemplate.lookup(JndiTemplate.java:155)
  to oracle.iam.request.api.RequestServiceDelegate. < init >(Unknown Source)
  ... 9 more
  Caused by: java.lang.ClassNotFoundException: org.eclipse.persistence.indirection.ValueHolderInterface
  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:202)
  at java.security.AccessController.doPrivileged (Native Method)
  at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:301)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
  ... 34 more
  Process has finished with exit code 1.
  
  
  
  Through a few forum with that said:
  https://CN.forums.Oracle.com/forums/thread.jspa?threadID=2432434
  
  But all of the code is not running (I can check that a few sys out is not getting printed) and that's why the request is not triggered in my case.
  
  Any assistance on this please.
  
  Thank you

  Make sure that you have all the pots in the class path: -.

  $Oracle_IDM1/server/clent/oimclient.zip, you get 4 pots: -.

  oimclient.jar
  Spring.jar
  EclipseLink.jar
  Common - logging.jar

  In addition, you have already wlfullclient.jar and jrf - api .jar

  You must have already established the system property: -DAPPSERVER_TYPE = wls

  Make sure you visit the following link: -.

  http://docs.Oracle.com/CD/E27559_01/dev.1112/e27150/APIs.htm#BCFCDJGJ

  Also, are you able to ping and telnet your IOM hostname from your Windows machine?

  Problem may be firewall etc...

  You said you use Console Design? From where? From your Windows machine or directly from the server UNIX using XMing or VNC etc?

  If you UNIX server, copy the folder designconsole on your Windows machine AND configure things in the xlclient.cmd...

  If you have found ways to NoSuchServiceException, it's the connectivity problem...

  In the etc/hosts file on your Windows machine, add the IP address of the machine of the IOM...

  This will definitely work...

  In addition, .bash_profile, I set the following environment variables... See if you're missing something: -.

  JAVA_HOME=/usr/java/JDK1.6.0_21
  MIDDLEWARE_HOME = / home/oracle/Oracle/Middleware
  WL_HOME = $MIDDLEWARE_HOME/wlserver_10.3
  ANT_HOME = $MIDDLEWARE_HOME/modules/org. Apache.ant_1.7.1
  $PATH = path: $HOME/bin: $JAVA_HOME/bin: $ANT_HOME/bin

• When I pick up my Windows 7 Acer Aspire power, the computer turns off when the battery shows fully charged

  I HAVE A CHILD OF 1 YEAR ACER ASPIRE WITH WINDOWS 7, WHICH IS CONNECTED TO BE WIRELESS. BUT WHEN I GET MY COMPUTER TURNS OFF THE POWER SUPPLY CORD. THE BATTERY SAYS FULLY CHARGED. IT WORKED AND NOW IT WONT. SOMEONE CAN ME SAY WHAT THE PROBLEM IS. I EVEN WENT BACK THROUGH HIM WITH DEFAULT AND IT DID NOT HELP.

  Hello

  Are you aware of any changes made to the computer, before the show?

  I suggest to change the power management and check for the issue.

  Change, create, or delete a power plan (scheme)

  http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme

  If the above does not help, I suggest you to contact Acer support for assistance.

  http://support.Acer.com/us/en/default.aspx

  I hope this helps.