Unable to drag the images to publish the service

Similar Questions

• Unable to drag the audio file in the timeline.

  I'm new to Premiere Pro and have tried to drag an audio file into a timelime without success. I tried dragging the same audio file in a different timeline and it works beautifully. No idea why I have this problem?

  Maybe:

  FAQ: Why no audio or video will not at the track where I let down?

• Unable to start the Service for the Protection of software

  I am running Windows RT on a Lenovo ZTE K3011W-F (aka Lynx). This device has been used by two people before, and so was a previous configuration. I did a factory reset on the device, except Windows now refuses to turn on, so I can't update/customize/upgrade, etc.. It is not immediately ban, but eventually it can be seen as harmful to the security of the system.

  I traced the symptoms to what seems to be a reasonable explanation, that is, the Service for the Protection of software is not running, and when he was invited to run, it returns an error indicating: error 5: access is denied.

  When I go to activate Windows Sidebar "Change PC settings", I saw a button that says active, but it displays a message that says: "not found Activation Error Description.

  Hello

  We will analyze and identify the cause of the problem. The steps described here.

  You may need to correct the time settings and the language.

  a. drag from the right edge of the screen and tap or click settings.

  (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click settings.)

  b. press or click change PC settingsand then tap or click the time and language.

  c. tap or click to change the set duration automatically off.
  d. under change date and time, press or click change, type or select the correct date and time for your current time zone and then press on change.
  e. tap or click to turn on the time is automatically set back to.

  f. install the latest updates by Windows updates.

  If the problem persists, you can consult this article for more information. You may need to activate the phone using the steps described in the article.

  Get help with activation errors

  http://Windows.Microsoft.com/en-AU/Windows-8/activation-errors

  Hope this information helps. Response with status so that we can help you.

• "Unable to detect the Service" - bluetooth mouse connects is no longer

  Recently reformatted my c: drive, have a Sony Vaio running windows xp and it has upgraded to SP3.  Tested connection Sonyerisson Xperia Sony headphones via bluetooth and the two connect very well.  Have uninstalled and reinstalled Toshiba Bluetooth stack and nothing.  He sees the mouse but gives the error "failed to detect the service."  Also see "Bluetooth Local COM" in the Panel does not register the blue tooth services, more they are not in the registry.  I had been using the mouse before reformat, so not sure what happened.

  Hello KMXperia,

  Thank you for your message.  Please click HERE for some troubleshooting process.  After running these steps, please let us know how you feel.  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• How can I get the error "Unable to start the service" on attempts to run administrative tools (including the Services application) when logged in as an administrator?

  A large number of menu selections is affected, including the 'computer management', 'Event Viewer', 'Services' and 'System Configuration'.
   
  I tried to clean a computer that was thus invaded by unwanted applications and the services that it was unusable.  I applied several sets of Windows updates until it has been fairly stable, then lightened through the Services application services, changing many services 'automatic' to 'enabled' or 'disabled '.  I suspect that some service necessary for the performance of the foregoing has been inadvertently stopped.  (None that he was '' strongly recommended '' or '' recommended '' do not turn off or the description seemed to make a requirement, but...)  I don't know how to confirm this theory, identify the missing service or reactivate a service without the Services application.

  I got lucky.  I called a local, independent computer store.  Their support staff (after confirming that I had an appropriate Windows license) told me that if the computer came with a disk for Installation of Windows Vista, there is probably a partition to start installation on the hard disk, I could get to with a special touch at the beginning of the start-up phase of the BIOS.  It flashed by so quickly that I missed my chance, so I put off the power while trying to boot Windows.  On my next attempt, I missed again (even if I managed to spot the key combination - F11).  But when he arrived at the start-up phase of Windows, he offered me a chance to run the system restore which was banned when I was logged in with an administrator account.  I had to go back a ways, but I found one who would start and was able to complete cleaning of the machine and make it to a usable state.
   
  Thanks to all who responded.
   
  Oh, and it seems (according to my conversation with the service of the local computer store) that my fatal mistake was by disabling the service allowing you to promote its own security.  Apparently an administrator account is not the rights needed to perform most administrative functions without it; If disabling the service gets you into a nearly unrecoverable state.  A hint of that in the description of the service, or even a total ban on deactivation, would be a good idea.
   
  -Kevin

• Error: "unable to start the service Object Push Profile (OBEX OPP)" when trying to transfer files from the Android phone via bluetooth

  Original title: Android mobile phone via bluetooth, I get an error on my phone.

  When I try to send a file by my Android phone to my laptop via bluetooth, I get an error on my phone saying "cannot start service Object Push Profile (OBEX OPP)". Reason: The return value is "false", but I can send files from my laptop to my phone OK.

  Hi steve3624,

  We recommend to check if there is no parameter which must be activated on your phone, then try to transfer the file to your laptop.

  We also advise to check if there are any service name Object Push Profile and start it. To do this, try the following steps:
  a. Click Start, type services.msc and press to enter.
  b. in the list of services, locate Object Push Profile service and double-click it.
  c. change the startup type to automatic and click on the Start button to start the service.
  d. click ok to apply the changes.

  For further assistance, please get in touch with the assistance of the Android team.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm unable to start the service for the name of the account to Network Service on Windows Server 2008.

  Original title: name of the account network Service can be resolved correctly on windows French

  I have a service, I want to run under the network service on windows French account. Computer is not in the field, but in the working group.

  Service is installed via install and uses the WinAPI functions to get the name of a valid account of localized, which is the AUTHORITY NT\SERVICE NETWORK.

  The problem is that service fails with errors in the following event viewer:

  (1) service depends on the Net Logon service which failed to start because of the following error:
  The operation was successful.

  (2) this computer is configured as a member of a workgroup, and not as a member of a domain. It is not necessary to perform the service access network in this configuration.

  However, if I go to the properties of this Service, Log On tab and button Browse... to address the NETWORK SERVICE account, it sticks "Network Service" value in field and function successfully starts. Note that it may not resolve the display name 'AUTHORITY NT\SERVICE NETWORK'.

  Another thing is that when I put the computer in the domain that manages all the service suddenly starting with 'AUTHORITY NT\SERVICE NETWORK' account but the system does not transform it in "Network Service" on English windows.

  So is this a bug on a French OS? Is there a solution? How can I get programmatically "converted" version of the account name ('AUTHORITY NT\SERVICE NETWORK'-> 'Network Service')?

  System: Windows 2008 R2 SP1 with the latest updates to the 01/10/2013

  Hi Vadim,

  I would have you post your query in the TechNet Forums because it caters to an audience of it professionals.

  Your question would be more out there.

  Check out the link-

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Back to us for any issues related to Windows in the future. We will be happy to help you.

  Thank you.

• Unable to start the service to install under Windows 7, get the error 5 access is denied

  THIS PROBLEM IS RESOLVED (PLEASE READ):
  There was NOTHING on the internet that has helped me. While I thought, on the permissions, and I thought of my C:\ (main one with what you have).

  Here's what I did to fix (this applies to all versions on Windows):

  (1) right click on C:\ (or E:\ whatever one holds your stuff)

  2) go to properties

  (3) under Security, click SYSTEM

  (4) ensure that the SYSTEM has all the permissions on ALL

  NOTE: When you do that on that day will be "cannot give permission to C:\boot (for example)" that's fine, just click continue until it's over

  And I'll put the first response as response so that when people search he said answered

  =========================================================

  I went to Serives.MSC and noticed that my Windows Installer service is not started. When I pressed 'Start' (manual, automatic and automatic (delayed start) to start the service, it said 'error 5 access is denied' I'm an administrator, but it did nothing.)

  I tried many things

  I tried 'net user administrator /active' then go to the administrator (the account) and did the same thing, but he did nothing.

  I tried to make another administrator account, and then did nothing.
  When I type "net start MSIServer" in command prompt (ran as administrator), but it says "error 5 access is denied."

  Hello

   

  Thanks for posting the question in the Microsoft Community!

   

  You cannot start the Windows Installer service and get error Error 5 access is denied.

   

  Have you tried to install or uninstall any program?

  The problem may occur may be corrupted Windows Installer engine.

   

  I suggest you follow the steps mentioned below

   

  Method 1: Re-save the installation service

   

  a. click Start, type MSIEXEC /Unregister. in the search box and press enter

  b. Click Start, type MSIEXEC / REGSERVER in the search box and press on enter.

   

  Method 2: File system (CFS) Scan Checker

   

  SFC scan will find all missing or incorrect system files and repairs them.

   

  See the site:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

• Unable to drag the photos to the investigation

  Hello

  I am not able to drag photos to reposition them in Lightroom 3.3 on windows vista computer. any guess? Tried to not recreate prefrences no help.

  To reposition the images you must be in the library and within a collection or an individual file (not a smart collection or a higher level of a folder hierarchy).

  Then select user command on the toolbar and to drag and drop. Press F1 for the Help system where it is explained

• Unable to update the Service Pack 1 for Vista

  PLEASE, SOMEONE HELP ME

  I'm new to all this. I have a laptop and have somehow an update for service Pack 1? Whenever I'm trying to download it then lift back with a load of error messages that I don't understand.

  I tried to download the pack that took 1 1/2 hours but she still cross properly. It lists a few kb936330 kb943899 kb936782 kb936021 kb947562 there are loads and loads of these kb numbers.

  Help! If anyone can help you'd want to answwer.

  PS: I'm part of the older generation so keep instructions for the jargon that I understand

  Thank you very much

  Hello

  May I ask how you are trying to install the Vista SP1?
  You try to first download it from the Microsoft Web site, and after a full download you are trying to install it?

  I have a Vista on my laptop too and I installed the Vista SP1 through the automatic update of the OS.

  The Vista SP1 update automatically, please go to-> Windows Update control panel.

  Here you must press the button install updates.

  The entire procedure will take some time, but everything should run automatically.

• Unable to use the service Windows Server 2012 EAP - MD5

  Hello

  I tried using MS Windows Server 2012 the authentication server installation, I turned on the NPS server, installation and set up roles. Then I followed https://support.microsoft.com/en-us/kb/922574 thread to add support of MD5 by default it is obsolete.

  Now I'm able to see the added registry entries and you can select the MD5 method, but I do not know where to give the password of the application. I added the InvodeUsername and the InvokePasswordDialog in regedit but its only gives me such an option to select the user name and password.

  I'm getting MD5 challenge sent by 2012 to the authenticator switch and finally Reject-request.

  Can you know me how to provide the password in 2012.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Unable to download the Service Pack in Windows XP

  I have Windows XP and download problems. It has been said that I have service pack 2 and service pack 3 required. can anyone help?

  Original title: Windows XP

  If you have XP service pack 2, you definitely need to service pack 3, but that may or may not address any problem you have.

  What are you are experiencing download problems and how this disorder manifests?  If you get an error message, please provide the full text without paraphrase.

  Windows Update no longer works until you have service pack 3 installed.

  To determine which service pack you have

  • Hold down the Windows key and press the Pause break button (or right click on desktop and select properties)
  • Examine what is listed in the system section on your service pack level
  • Note your type of processor in the computer section

  Assuming that you already have service pack 2, read this first-->

  http://support.Microsoft.com/kb/950717

  If your PC is a HP Pavilion and Presario, Media Center and has a processor AMD (see above), you must install this hotfix before installing SP3-->

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&DLC=en&softwareitem=PV-60484-2

  Download service pack 3 here--> http://www.microsoft.com/en-us/download/details.aspx?id=24

  (ignore the warning on the subject of "it professionals and developers downloading and installing on multiple computers on a network"-which was written when it was still possible to get through Windows Update XP sp3)

• Unable to get the Service class

  I did a few test installs workspace as assessment locations.

  Whenever I try to buried in the central offices of data service to make changes, I may enter only once and then from there, there is no way to show, edit or copy the default COS value; all I get is the error above.

  This is a new installation, following the manual and most of the default settings, including ssl certificates. only, I joined the domian and configured the device connector to collect thinapp packages.

  Everything works fine and I have had no error installation and configuration of vApp.

  I tried to put this device into maintenance mode and discount online and also rebooted it but no luck.

  Someone at - it had the same problem? Is there a way around it?

  Thank you!

  I sent the following to you as a private on 20 June message e-mail, did you receive it? I now obscured the real email address.

  Hello

  Thank you for sending the detailed log. After watching the token, it seems that there may be two user records using the same email id-

  We do not support two users having the same email address. It is possible the user you are connected to the workspace horizon, providing data breach, as is an e-mail duplicate. Therefore, you are not able to access the COS.

  Can you change the email address and the new provision? Or remove the other user?

  Sridevi

• Unable to contact the Service Adobe, I have a problem with the number.

  Hello

  I would like to have more information about the Adobe domain controller. My intention is to buy the product and use it in my office, we are a small company (4 PCs).

  If I am wrong, I have to take the standard networks for Business Plan, but I can't organize any request for payment for more information, because I don't have a problem with the number I'm supposed to call.

  Y at - it another way to know if this software is very suitable for me and my business and most of all the how much it will cost.

  Thank you for your attention.

  Good day!

  I look forward to hear from you.

  Best,

  Augusto

  Hi Avgvstvs67,

  Please see this link: https://acrobat.adobe.com/in/en/pricing/business-pricing.html

  Kind regards

  Rahul

• Unable to create the service in ALBPM Studio 6.0

  Hello
  
  I'm writing a method that returns a string.
  But now I get an error that says that the return statement cannot be present in the functions.
  
  Now, I tried all possible ways, but I was not able to create a function.
  
  Could someone please help me with creating a function in ALBPM. otherwise tell me how should I do to return a string to a method.

  Hello

  I suspect you wrote a method with the return type string, but the method has no return statement.

  Go to the component catalog-> BPM object-> right click on the object BPM and select new method-> give the name of the method. Now opens the window of the method. Go to the propertied tab of the right most Panel. Define the return type as string. In the IME window write your business logic. The mentioned below, the code is for example one.

  String msg = "Hello World";
  return msg;

  Sidonie