Unable to empty the trash and the error message Dc93

Similar Questions

• Empty Device Manager and for error message "cannot create the enumerated device root need to install Parallels paravirtualization pilot".

  Original title: Device Manager empty

  I have Windows XP Service Pack 3 installed in a Bootcamp partition on my Intel iMac. I can detect and install new hardware such as USB keys. However, the Device Manager window is blank - how can I get the window to display the devices connected to the computer? I am also unable to install Parallels tools when I use Bootcamp as a virtual machine. The error message "cannot create the 'root-enumerated device' necessary to install Parallels Paravirualization driver.

  Hey Harcjk,

  For your first question, go through this article.

  None of the items appear in the device list manager when you open
  http://support.Microsoft.com/kb/311504

  For the second question, here are some suggestions:

  Method 1: Uninstall & install Parallels tools

   

  NOTE: we highly recommend you make a backup of the virtual machine before you continue.

  a. start your virtual machine and cancel the installation of Parallels Tools Wizard.

  b. Click Start--> Panel--> Add / Remove programs and remove the Parallels tools in the list of applications.

  c. restart Windows.

  d. install the Parallels tools by clicking on the Virtual Machine--> install the Parallels Tools.

  Method 2: Uninstall antivirus software

  If the problem persists, try the following:

  Temporarily uninstall all the antivirus software to the virtual machine and repeat steps of the "Uninstall & install Parallels Tools" section above.

  Note: Don't forget to install the back antivirus software, once the problem is resolved.

   

  Method 3: Uninstall, clean & install Parallels tools

   

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

   

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  a. If the problem persists, try the following:

  b. start Windows.

  c. go to "Start" > "Control Panel" > "Add/Remove Programs" and uninstall theParallels Tools if it is present.

  d. go to 'my computer' > 'C' drive > "Program Files" > "Parallels" folder and delete the "Parallels Tools" folder, if present.

  e. click the Windows 'Start' menu-> 'run' and type 'regedit'. Click OK.

  f. in the registry editor, go to "My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Parallels" and delete the heading "Parallels Tools" and go to "My Computer\HKEY_CURRENT_USER\SOFTWARE\Parallels" and remove the 'Tools' section.

  g. restart Windows.

  h. now install Parallels tools in the 'VM' menu on the Parallels Desktop menu bar, while Windows is running.

  I hope this helps.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to control the error message calendar get "check your account information and agree with him.

  I am unable to order a calendar in iPhoto.  Continue to receive the error message "your account information has changed.  "Please review you account information and approve it.  My delivery/billing address is correct.  Please notify.

  Access your account online and delete page and re-enter all billing information.  Also make sure you have the correct print product store deleted in the pane of the Advanced preferences in iPhoto.

  Restart and try again.

  

• Unable to display the error message using the controller extension

  Hello

  I am trying to extend standard iproc CheckoutDistsCO. I have to display the error message when the quantity entered is '0 '. So I wrote logical when you click on the apply"" button. I created an extension CheckoutDistsCOEx & written logic here... but I am able to see messages in the log file, but no error message on screen.

  After having many forums I place super.processFormRequest (pageContext, webBean); at the end. It start always error message.

  Standard CheckoutDistsCO has a logic in the button apply. I think it is the substitution of the extension code... How can I fix? Pointers appreciated please

  package xxtr.oracle.apps.icx.por.req.webui;

  Import oracle.apps.fnd.framework.OAApplicationModule;

  Import oracle.apps.fnd.framework.OAException;

  Import oracle.apps.fnd.framework.OAFwkConstants;

  Import oracle.apps.fnd.framework.OARow;

  Import oracle.apps.fnd.framework.OAViewObject;

  Import oracle.apps.fnd.framework.webui.OAPageContext;

  Import oracle.apps.fnd.framework.webui.beans.OAWebBean;

  Import oracle.apps.fnd.framework.webui.beans.table.OAAdvancedTableBean;

  Import oracle.apps.icx.por.req.webui.CheckoutDistsCO;

  Import oracle.jbo.domain.Number;

  java.lang.String import;

  public class CheckoutDistsCOEx

  extends from {CheckoutDistsCO}

  {} public processRequest Sub (pageContext OAPageContext, OAWebBean webBean)

  super.processRequest (pageContext, webBean);

  }

  {public processFormRequest (pageContext OAPageContext, OAWebBean webBean) Sub

  super.processFormRequest (pageContext, webBean);

  OAApplicationModule am = pageContext.getApplicationModule (webBean);

  pageContext.writeDiagnostics (this, 'seized in PFR method", OAFwkConstants.STATEMENT);

  If (pageContext.getParameter ("Return")! = null) {}

  String applyevent = pageContext.getParameter (EVENT_PARAM);

  If (applyevent.equalsIgnoreCase ("return")) {}

  pageContext.writeDiagnostics (this, "clicked the Apply-back button" + applyevent, OAFwkConstants.STATEMENT ");

  OAException message = new OAException ("clicked on Apply-back put the message in the dialog box" + applyevent, OAException.INFORMATION);

  pageContext.putDialogMessage (message);

  OAViewObject poreqdistvo = (OAViewObject) am.findViewObject ("PoReqDistributionsVO");

  pageContext.writeDiagnostics (this, "display object = >" + poreqdistvo, OAFwkConstants.STATEMENT);

  OAAdvancedTableBean xxProjectDistsAdvTable = (OAAdvancedTableBean) webBean.findChildRecursive("ProjectDistsAdvTable");

  Line OARow = (OARow) poreqdistvo.getCurrentRow ();

  If (line! = null) {}

  pageContext.writeDiagnostics (this, "line Found"+ row, OAFwkConstants.STATEMENT);

  Number of xxtrqty = (Number) row.getAttribute ("ReqLineQuantity");

  pageContext.writeDiagnostics (Thi, "get attribute reqlinequantity" + xxtrqty, OAFwkConstants.STATEMENT);

  If (xxtrqty.intValue () == 0) {}

  pageContext.writeDiagnostics (this, "in comparing to 0 xxtrqty" + xxtrqty.intValue (), OAFwkConstants.STATEMENT);

  throw new OAException ("Enter valid amount", OAException.ERROR);

  }

  }

  else {}

  throw new OAException ("no line Found Else", OAException.ERROR);

  }

  }

  else {}

  throw new OAException ("not in"apply button", OAException.ERROR);

  }

  super.processFormRequest (pageContext, webBean);

  }

  }

  Thank you

  TR

  For example, when you comment on the super. PFR, you receive the error message on the right of the screen?

  Can you try this code and paste the debug log.

  public class CheckoutDistsCOEx extends CheckoutDistsCO {
      public void processRequest(OAPageContext pageContext, OAWebBean webBean) {
          super.processRequest(pageContext, webBean);
      }
  
     public void processFormRequest(OAPageContext pageContext, OAWebBean webBean) {
    //super.processFormRequest(pageContext, webBean);
          OAApplicationModule am = pageContext.getApplicationModule(webBean);
          pageContext.writeDiagnostics(this, " ----> Entered into PFR Method", OAFwkConstants.STATEMENT);
          String applyevent = pageContext.getParameter(EVENT_PARAM);
    pageContext.writeDiagnostics(this, " ----> applyevent: " + applyevent, OAFwkConstants.STATEMENT);
          if (applyevent.equalsIgnoreCase("return")){
    pageContext.writeDiagnostics(this, " ----> Inside If", OAFwkConstants.STATEMENT);
              OAViewObject poreqdistvo = (OAViewObject)am.findViewObject("PoReqDistributionsVO");
              OARow row = (OARow)poreqdistvo.getCurrentRow();
    pageContext.writeDiagnostics(this, " ----> row : "+ row, OAFwkConstants.STATEMENT);
              if (row != null) {
    Number xxgesqty = (Number)row.getAttribute("ReqLineQuantity");
    pageContext.writeDiagnostics(this, " ----> xxgesqty : "+ xxgesqty, OAFwkConstants.STATEMENT);
                  if (xxgesqty.intValue() == 0) {
    pageContext.writeDiagnostics(this, " ----> throwing errro : ", OAFwkConstants.STATEMENT);
    throw new OAException("Enter Valid Quantity ",OAException.ERROR);
    }
    }
              else {
    pageContext.writeDiagnostics(this, " ----> No Row Error", OAFwkConstants.STATEMENT);
    throw new OAException("No Row Found Else ",OAException.ERROR);
    }
    }
    pageContext.writeDiagnostics(this, " ----> Calling Super", OAFwkConstants.STATEMENT);
          super.processFormRequest(pageContext, webBean);
      }
  }
  

  See you soon

  AJ

• I'm unable to access my LR5.7 of my recent holiday catalog. I am running Windows 7 (64-bit) and recently installed and then uninstalled DxO Optics Pro. The error message says it "cannot open another application already has its opening.» Leave the

  I'm unable to access my LR5.7 of my recent holiday catalog. I am running Windows 7 (64-bit) and recently installed and then uninstalled DxO Optics Pro. The error message says it "cannot open another application already has its opening.» Leave the other copy of Lightroom before trying to launch' the problem is, that I can see a copy of the open LR5 and cannot locate the "." lrcat.lock"the specific catalog I want to open the file. I tried to re-boot my computer, but it did not work.

  Thanks Geoff. I was finally able to locate the "." lrcat.lock' of the relevant folder to the catalog I want to open. Once I deleted it, LR5 was able to access my images. Problem solved. Thank you

• LR has started to refuse to import my photos from sd card. They appear in the display of the grid, all verified and ready to import, but I get the error messages. 'Cannot read file', (it of funny, since LR is SHOWING files full resolution), or "unable to

  Cannot import photos into LR. On my other computer, it works fine. With the help of LRCC 2015. Get the error message can't read files, or can not copy to the location.

  How can I simply wipe the slate clean and reinstall or re-import everything? I'm really happy with this, as I am now prevented from using the program.

  Can I reinstall LR and keep the catalog?

  Hello

  Please check what is the Destination defined in the right panel in the import window

  The error means the destination that you copy the files to is invalid or read-only.

  Change the Destination to another location and see if you can import

  Concerning

  Assani

• I deleted by mistake my certificates. Now, I get the error messages trying to connect to gMail, eBay and my bank accounts, etc.

  I recently did some "housekeeping" on my computer and for reasons known only to nini-gods, I delected all my security certificates. Now, when I try to log in to gmail, ebay, my bank accounts or any https:// site, I get a warning message "this connection is Untrusted." I click on the links provided to overcome the safety message, but whenever I return to the site I have to jump through all the hoops again. I see a small box that can be clicked to confirm security exception, but the little box that must be clicked to "make the permanent exception" is always grayed out. I know I'm on the right sites - have been using the links on the personal bar for years without problems. It started right after I deleted the certificates.

  I've tried everything. Firefox RELOADED (use 3.6.4) deleted and reloaded the bookmarks, follow the instructions when I get the error message. Nothing works. As soon as I close the browser, and then go back online, I'm back to error messages.

  Can anyone help?

  COR - el: thanks a lot for this solution. Everything works fine now.

  However, I had a problem with deleting the files. I dragged to the trash, and then tried to access the sites in question and received the same message. I restarted the computer and when I checked the files I was dragged to the trash were right where they were before. The only file that are been trashed was the .txt file.

  So I renamed them as you suggested and now everything works fine.

  Thank you again once - I tried to understand by using the troubleshooting Firefox site, but your explanation was simple and easy to follow.

  Val

• Empire Total War installation and getting the error message "steam exe (main exception).

  I just bought a new laptop Assus with Windows 7 and bought the DVD Empire Total War.  I put in disc 1 and click on install.  He loads the updates and the steam but then stops and gives me the error message steam.exe (main execption) unable to load library Steam. DLL. I click OK and then install any more.  I have de-installed Steam, Steam sent a request for help, got another way to install the Internet, created a Steam user ID and password... Yet, it is still impossible to load the library. Can someone help me? I want fair paly this game and I am ready to kill people to steam.  Please tell me an easy way to install this game so I can play?

  Try to use a hard - wire to your router configuration and see if that helps.

• Unable to get the error Code Windows Update 0 X 80076424

  When the Windows Update of Vister site I get error Code 0 X 80076424 and I am unable to find a solution, can help you?

  Thank you

  Shashi

  Hi Shashipatel,

  1. were you able to download and install updates as soon as possible?

  2 are you able to verify updates?

  3. have you made changes on the computer before this problem?

  4. What is the error message or an exact error code?

  5. have you connected external devices other than the keyboard and mouse?

  I would suggest trying the following methods and check if it helps.

  
  Method 1:

  I suggest you to run the fixit from the following link:

  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2:

  Put the computer in a clean boot state, and then try to install the updates and check if the problem persists.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: Make sure that you reset the computer in normal mode once the diagnosis is complete.

  Hope it will be useful. Incase if you still have any other queries please respond with more details and we will be happy to help you.

• Ox80070002 and Ox8007000D error messages - I can't always solve the

  Hello

  It seems that my PC was unable to make an update of windows properly for a month now, and after having searched today, of Ox80070002 and Ox8007000D error messages come with updates.  I followed the advice of Microsoft online, but he is still unable to download the many updates.  As it also erases the log showing what are the files to download, I can now show you only those below.  I do not see anywhere how to ensure that these updates are downloaded successfully, so please can you help me?

  Windows XP Update security for Windows XP (KB2585542) February 12, 2012 Windows Update Windows XP A security update cumulative for Internet Explorer 8 for Windows XP (KB2618444) February 12, 2012 Windows Update Windows XP A security update for Internet Explorer 8 for Windows XP (KB2544521) February 12, 2012 Windows Update Windows XP Update security for Windows XP (KB2510531) February 12, 2012 Windows Update

  Try to download an update and manually install the same. You can search for manual downloads here:

  Search for a download
  http://www.Microsoft.com/downloads/search.aspx?displaylang=en

  Another suggestion, maybe a little maintenance hard disk as 'check disk' and 'defrag' can help to install the updates. This could be the cause of corruption, updates if the hard disk is fragmented badly etc.

  Your virus scanner is perhaps interfere with the update process.

  Recommendations for computers that are running Windows Server 2003, Windows 2000, or Windows XP Antivirus
  http://support.Microsoft.com/kb/822158

  Where you could get a support -

  Microsoft Windows Update support incident request:
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  Purchasing problems of installation of the security updates Microsoft may also visit the following page for assistance:
  https://consumersecuritysupport.Microsoft.com/

• I am unable to use the "email us" on some sites Web, the error message is ' no e-mail program associated to this.

  Original title - Outlook Live

  Or direct or Outlook appear on win 7 list of default programs, so I am unable to use the "email us" on some sites Web, the error message is ' no e-mail program associated to this "" go to default programs and associate.   Even though I have a Live (and Outlook account, they are not listed by default in the programs.  I can send and receive emails in 'Live' and prospects, but cannot associate, because they are not displayed.  I don't have MS Office.  I use the email from Comcast, but also does not appear.   Absence of a response, does anyone know how to make the "no e-mail program associated to this" work?

  Hi Michael,

  Please answer this question to get more clarity on this issue.

  • You have installed Windows Live Mail email client?

  This problem may occur if Windows Live Mail or Microsoft Outlook is not installed on the computer.

  If you don't have Windows Live Mail, you can download and install Windows Live Essentials to check the status.

  You can download Windows Live Essentials here: http://www.microsoft.com/en-us/download/details.aspx?id=3945

  Reference article.

  Windows Essentials: http://windows.microsoft.com/en-us/windows-live/windows-essentials-help#v1h=tab4

  Response with the State of the question and we will be happy to offer you our help.

• Impossible to install World of Warcraft and the error message "Windows cannot access the specified device, path or file. May not permissions to access you the item.

  Original title: Need help ASAP please

  Hi all

  I am currently running windows 7 and recently I met a problem that has been giving me the error code: 0 x 80070043 and the Error Message: Windows cannot access the specified device, path or file. You can't have appropriate permission to access the item'. When you try to run a Setup.exe for world of warcraft. But the thing is I am the administrator of the computer and have not had this problem in the neck, it is their all settings or something I can do to fix this? any help would be greatly appreicated thanks and God Bless.

  Hello Jay,
  Thanks for posting your question in the Microsoft Community forum.
  The description of the problem, I see that you are unable to install World of Warcraft and error message "Windows cannot access the specified device, path or file. You can not have appropriate permission to access the item".»

  This problem may occur if you do not have permissions for the file or the location of the file, if the file is located on a site that is not accessible at the moment as a network location or an external drive that is not currently connected to the computer or your antivirus software may block the file.

  Don't worry; Let's try a few steps that will help you solve the problem.

  Method 1:
  I suggest you run the fix it and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/program_install_and_uninstall

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file
  http://support.Microsoft.com/kb/2669244
  You can check the links for more information:

  Install a program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  Install programs: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/installing-programs-frequently-asked-questions

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• After the system starts. I get the error message; "" Unable to start Bluetooth stack service "from BTTray.

  After the system starts. I get the error message; "" Unable to start Bluetooth stack service "from BTTray.

  Pls I need help to resolve this error message.

  Concerning

  Unfortunately, this model laptop has a Broadcom bluetooth device or a device of Atheros.

  Try to install the Atheros driver first because it is more common.  If it isn't an Atheros card, Setup HP rejects the update indicating no match of material.

  If this isn't Atheros, install the Broadcom bluetooth driver.

  Here is the page of the driver for your laptop and Windows 7 64-bit.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5218666#n311

  Bluetooth drivers are in the category network drivers.

  Let me know what happens.

• Move a layer from one document to another, I get the error message that the layer is empty

  When I copy a layer from one document to another in PS CC 2015.5 and then try to move the layer in the destination document, I get the error message that the layer is empty.  It is not empty and I checked several times and checked that the layer is not empty.  I have never had this problem before and wonder if something has changed in CC 2015.5.

  Thanks to all who responded.  I think the problem was that I was using the NEF files and that he had not yet renamed PSD files.  Copy the layer in the destination document, but when I tried to move the layer in the destination document, I received the error message.  Apparently, he was copying the layer but there not then recognize the NEF format.  Once I saved both documents to the PSD, then the program behaved normally.  I appreciate your all of the help.

  Sue

• vCenter Server displays the error message: unable to connect to the host

  vCenter Server displays the error message: unable to connect to the host

  Symptoms

  • vCenter Server cannot connect to a host when you perform operations such as:

  •

  o Storage vMotion

  o cold migration

  o cloning a virtual machine

  o the model deployment

  • Newspapers vpxd that contains an entry similar to:

  [2009-06-04 19:27:16.326 error "App" 4444] [VpxdInvtHost] IP address change for 10.223.122.143 to 10.223.127.197 unhandled, verification of the SSL certificate is not enabled.

  • You see errors similar to:

  Unable to connect to the host o

  o [2009-06-04 19:27:09.952 'Libs' 3902384 WARNING] [NFC ERROR] NfcNewAuthdConnectionEx: unable to connect to peer (numRetries = 2). Error: Unable to connect to the host 10.223.122.143: connection timed out

  • vCenter Server shows the VMS as being disconnected then connected.

  Hello

  Resolution

  Cause

  This problem can occur if an ESX host's IP address is changed while being managed by vCenter Server.

  Check the cause

  To check the cause of the problem:

  1. Log in as root to the ESX host using a SSH client.
  1. In the file etc/opt/vmware/vpxa/vpxa.cfg, find the IP address of the host. The entry looks like:

     
     10.21.48.121
     

     Note: for more information about editing the files, see installation in VMware ESX configuration files (1017022).

  Troubleshooting

  If the IP address is incorrect, perform the following steps in order. If the operation does not resolve the problem, continue to the next step. Don't skip a step.

  1. Disconnect and then reconnect the host:
  1. Right click on the ESX host in vCenter Server and click Disconnect.
  1. Reconnect the ESX host in vCenter Server.
  1. Restart the VirtualCenter agent on the ESX host:
  1. Stop the service of vpxa with the command:

     # service vmware-vpxa stop

  1. Open the /etc/opt/vmware/vpxa/vpxa.cfg file in a text editor and correct the IP address of the ESX host.
  1. Start the service of vpxa with the command:

     # service vmware-vpxa start

     Note: for VMware ESXi, you may have to restart all the management agents. For more information, see restart the agents on an ESX or ESXi Server (1003490) management .

  1. Rebuild the VirtualCenter agent on the ESX host configuration file:

     Attention: this step removes all the Statistics counters historical host and the virtual machine. If VMware ESX host is running in virtual machines that starts in a permitted CVS environment, you maybe won't be able to add the host without stopping the virtual machines first.

  1. Right click on the ESX host in vCenter Server and click Disconnect.
  1. Remove the ESX host disconnected from vCenter Server.
  1. Backup the file vpxa.cfg with the command:

     # mv /etc/opt/vmware/vpxa/vpxa.cfg /etc/opt/vmware/vpxa/vpxa.oldcfg

  1. Add the ESX host disconnected to the server vCenter inventory.
  1. Run the following command to view the contents of /etc/opt/vmware/vpxa/vpxa.cfg and confirm that the host IP address is correct:

     # cat /etc/opt/vmware/vpxa/vpxa.cfg