Unable to get controller Xbox 360 on Run

Similar Questions

• How can I get my xbox 360 controller to work with my computer... Im running the 64-bit version of Vista... my computer does not even recognize the hardware?

  How can I get my xbox 360 controller to work with my computer?... I can't even recognize the hardware? Im running Vista 64 bit on a quad core rig any help would be appreciated... Thank you

  Hello Ghostdogaln.

  How do hang you the controller?  You must either use a * wired * controller, or use a wireless controller with receiver game Xbox 360 for Windows.

  If you use a wireless with a Play and Charge kit controller, it will not work as long as the USB cord only actually plug into the battery for the controller itself. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Wired controller Xbox 360 connects to Windows 7, error: USB device not recognized

  Original title:-wired controller Xbox 360 connects to Windows 7

  Hey, I recently bought a controller wired xbox 360. And it does not connect to my PC. When I try to connect it says device not recognized USB. And in Device Manager it says it is an unknown device and that "Windows has stopped this device because it has reported problems. (Code 43) "I downloaded the driver from the software http://www.microsoft.com/hardware/en-us/downloads here and I also downloaded the MotioninJoy as an emulator, but the xbox 360 controller does not always connect." Is there a way to fix this?

  Hello

  1. did you of recent changes to the system before the show?

  2. do you have the receiver for the device to the XBOX?

  Method 1: Troubleshoot your XBOX controller.

  Follow the steps in troubleshooting from the link below and check if it helps.

  http://support.Microsoft.com/kb/908888

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  http://support.Xbox.com/en-us/Xbox-360/troubleshoot/accessories/controllers-remotes

  Method 2:

  (a) click Start.

  (b) access Control Panel, click on System.

  (c) click on hardware, click Device Manager.

  (d) open Device Manager and expand the devices with error code 43.

  (e) right click on the device and Uninstall the device.

  (f) restart the computer.

  Check to see if that fixes the problem.

  If the problem persists, I suggest that you follow the XBOX support link below for assistance.

  http://support.Xbox.com/en-us/

  In addition, check out the link below and check if it helps.

  http://support.Xbox.com/en-us/Xbox-360/troubleshoot/hardware/error-codes

  It will be useful.

• Unable to connect the XBox 360 to my PC showing 'Impossible to locate.

  Original title: homegroup

  UNABLE TO CONNECT THE XBOX 360 TO MY PC... ERROR CODE ST

  CANNOT LOCATE ATES

  Hi laurent,.

  Thanks for posting your question in the Microsoft Community.

  I suggest you to contact Xbox support to obtain assistance from the link below:

  Contact XBox Support:

  http://support.Xbox.com/en-us/contact-us

  I hope that the information above helps you.

• I want to use my controller xbox 360, but windows 8 is not under operating systems, what should I do?

  I want to use my controller xbox 360, but windows 8 is not under operating systems, what should I do?

  Plug it in and let the auto drivers install.  I use mine all the time.

• Unable to connect wireless Xbox 360 controller to the Xbox 360 to a PC wireless adapter

  IM installation driver for adapter, restart computer, insert the USB adapter, try connecting the Xbox 360 wireless adapter controller - nothing happens, adapter cannot see controller. After half an hour trying to CONECT setting on the adapter. Next day, same thing: an hour and connected controller. But that's all. Third time a cant connect even after the hour by train. Help, please! How do I operate it normally?

  P.S. I have Windows XP Service Pack 3

  Thanks in advance.

  Hello

  Have you tried the article Umesh gave in the previous post?

  If this does not help, then we will perform a clean boot of the operating system and see if that helps.

  The following describes this process:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  Best regards

  Matthew_Ha

• Can not get the xbox 360 "ring of fire" controller to stop flashing on pc windows 7.

  I have windows 7 64 bit and I can use the gamepad xbox 360 on it just find but light ring stops flashing. Apparently the lit quadrant is supposed to signal that "port" it is plugged, but it is not only the case.

  I had this same problem and it was caused by the installation of bad driver.  To solve this here is what you should try:

  Plugin your controller
  Click Start
  Click on Control Panel
  (material and audio sub in blue letters), click View devices and printers

  MAKE SURE THAT THE UNKNOWN DEVICE IS YOUR FIRST CONTROLLER BY REMOVING THE PLUG OF YOUR COMPUTER AND SEE THAT IT DISAPPEARS FROM THE LIST

  (Plug the controller back to continue)
  Right click (if there is an unknown device), and then click Properties
  Click on the Hardware tab
  Click on the properties button
  Click the change settings button
  Click on set to update driver
  Click Browse my computer for driver software
  Click on let me pick from a list of drivers for devices on my computer
  Scroll down until you see common Microsoft controllers for the windows class
  Double click on it
  (On the list in the box open select :) If you are using a wired remote: gamepad xbox 360 for windows version 2.1.0.1349 [8/13/2009]...if you use a controller and a wireless receiver: receiver wireless xbox 360 for windows version 2.1.0.1349 [2009-08-13]])
  Click next
  (in the new box that opens), click Yes.

• problem of controller Xbox 360 windows

  Hi Tomas.

  Please go to the Microsoft Community Forums.

  We are sorry that we are not able to access the link you gave.

   

  So, if you could answer a few questions that would help us resolve this problem:

  1. is this a wired Xbox 360 controller or wireless?

  2. do you get an error message?

  3. What is the exact problem you are facing with Xbox 360 controller?

   

  Here are some ways you can follow to resolve the problem:

   

  Method 1:

  Run the hardware and devices Troubleshooter

  Check out the link:

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

   

  Method 2:

  Uninstall and reinstall the drivers for the Xbox 360

  Check out the link:

  http://www.Microsoft.com/hardware/en-in/downloads#gaming

   

  Method 3:

  You can check if the below article assist, you configure the device correctly-
  http://support.Xbox.com/en-us/games/Xbox-controller-for-Windows-Info

   

  Also you can check the link below for assistance:
  http://forums.Xbox.com/xbox_forums/xbox_support/default.aspx

   

  I hope this helps. If the problem persists, please email us with the exact details of the question and the answers to the questions above so that we can better help you.

  1. it's wireless

  2 NO.
  3. the right analog is drifting upward without touching the cushion
  I have try all methods and have no idea what to do: /.

  FOR ANY XBOX PROBLEM:

  XBox - Support
  http://support.Xbox.com/en-us/pages/default.aspx

  XBox - Contact us (support)
  http://support.Xbox.com/en-us/contact-us

  XBox - Support Forums - and my XBox (top-right)
  http://forums.Xbox.com/

• Problems of controller XBOX 360 using Vista PC

  I bought an XBOX 360 Wireless Controller to my PC which is Vista 32. It worked at first and now it does not work... There is a lot of ppl with this problem with no will... Please help?

  cuzandlisa,
  I have not had this problem myself.  But you might want to look at the troubleshooting on the Xbox site.
  This page is especially for the Xbox to the PC controllers:
  http://support.Xbox.com/support/en/us/NXE/hardware/accessories/accessoriesforPC/ControllerforWindowsList.aspx

  Hope that gives the info you need.  FYI: My first thought would be to uninstall\reinstall the driver.  Also make sure that your PC is up to date with updates.

  Windows 7 was not my idea, but it still rocks! Soli Deo Gloria!

• Issue of controller Xbox 360 (PC connection)

  Greetings all I am new to any connection my Xbox 360 controller to my pc and ive met some problems, Ive downloaded the necessary drivers and programs for my controller 360 to connect to my pc but when I connect my conroller Xbox 360 Usb charger supplied with the controller wireless controller wireless, it does not pick up there. When I hit the guide button it goes right on my xbox 360

  Great thanks for the help everyone. Looks cause im going to have to go buy a wired remote, I have a problem with my wireless controller where it does not load (when I conect the charger in the light control will be red for about 30 seconds then green shift, saying that it is charged when it is not.)

• Controller XBOX 360, used for mice

  OK... I just bought the game of the year Elderscrolls oblivion eddition and I bought a XBOX 360 controller to use considering how it is compatible with windows 7... Everything works great with one exception. The right analog stick on the controller is supposed to control the movements of camera but it does nothing, so I have to resort using the mouse which can be quite the pain. How can I set the analog stick right to act like the mouse to control the camera? Its very important and any help will be greatly appreciated.

  I think he was looking for the Oblivion controller settings.

  Try this site and scroll down to Game Pad feature
  http://www.Elderscrolls.com/downloads/updates_patchnotes6.htm

  Good luck!

• Unable to connect to Xbox 360 via the network.

  Original title: network host down

  OK, so I have my xbox 360 and a laptop of HP under win7 set up on my home network to my dell PC winVISTA.  One day the network just stopped working no real reason.  The xbox and the laptop can connent to the internet but do not communicate with each other.  Pls help and nothing changed just, it stopped working.  The xbox is my media hub and my laptop for work, this is all very frustrating.  Thnx in advance for any help.

  Hello

  1 have you made changes to your computer recently?

  2. what happens when you try to connect between computer and Xbox 360?

  I suggest you follow the methods and check if it helps.

  Method 1: Follow the link below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Method 2: Links and check if it helps.

  Xbox LIVE connection problems
  
  http://support.Xbox.com/en-us/pages/Xbox-Live/troubleshoot/connection-issues/connect-Xbox-Live.aspx
   
   
  Error: Unable to connect to your wireless network
  
  http://support.Xbox.com/en-us/pages/Xbox-360/troubleshoot/KB/error-cant-connect-wireless-network.aspx?kbid=978945
   
   
  Xbox LIVE connection errors troubleshooting
  
  http://support.Xbox.com/en-us/pages/Xbox-Live/troubleshoot/connection-issues/errors.aspx
   

• How < I > completely < /i > reinstall a wired controller Xbox 360 on a Windows PC?

  I have a wired Xbox 360 controller, which I use on my PC and my laptop... Who is having trouble on the PC when the Vibration is enabled in games. (Among other problems)

  I read the other post, where the answer is that the bus power supply and motherboard were not powerful enough and is that which is at the origin of the problems, now I'm not saying I wouldn't totally rule this possibility, but I'm pretty confident that my PC must be capable of this (especially if my cell phone).

  I think my problem is to do the installation, because there was a problem during the installation on the PC...

  So that the Xbox 360 controller installed its drivers and what - not the first time I plugged on my PC, my friend offline security "do not pull the Xbox off the shelf" section of wire and an error, but the installation is complete. The controller has the same way as it does on the laptop, for example, the green ring just keeps blinking while on the laptop, he moved to the "Player 1" quarter. However, the feature (buttons and sticks) works well in games, crashing less vibrations.

  To be honest, I don't really care about the vibration and have just disabled in the game options, but I recently bought a game where I can not disable the vibration and so I can not use my controller with it. (sad face). That said, it would be nice to stop the flashing green light several times.

  I tried through Add/Remove programs but do not understand how completely remove everything if I do a fresh install.

  I don't know if there are any software is installed, or elements of the registry or drivers. But I need to remove what it installed so I can reinstall it without error.

  My title should have been no doubt: "How to completely uninstall a wired Xbox 360 controller on a Windows PC" since it is the part of the resettlement of which I have a problem with.

  Can someone help me?

  Thank you! (happy face with slightly concerned Front)

  Hello

  Method 1:

  I suggest you to see link and check if it helps:

  Connect a game controller

  http://support.Xbox.com/en-us/Xbox-360/accessories/connecting-game-controllers

  Method 2:

  See the link and check if it helps:

  Troubleshooting your Xbox 360 Controller for Windows

  http://support.Microsoft.com/kb/908888

  See also the link for Xbox support:

  http://support.Xbox.com/en-us/home

  I also suggest you to report the query in Xbox forums:

  http://forums.Xbox.com/?XR=shellnav

• Receiver for wireless controller Xbox 360 to PC does not

  I've had my Xbox 360 controller for at least a year now and so far it has been working perfectly. But yesterday, I decided to visit my brother and took my Xbox controller and the receiver with me. I put them in a bag with a controller leads and additional third-party, got in a car to my brother's House. When I got there, we plugged the receiver to the PC, but the receiver does not light. In fact, the computer does even not recognize that a new device has been connected. The next day, I plugged it to my computer for the first time after leaving the House of my brother and it did not work this time either.

  Here is what I tried:

  • I tried all the USB ports available and may conclude that they have nothing to do with the problem. All ports operate as it should.
  • I tried on a total of 3 computers, and none of them recognize be plugged.
  • I uninstalled and reinstalled programs Microsoft Xbox 360 accessories nothing helps.

  In addition, my computer does not recognize an unidentified device, but I don't think that it has nothing to do with the problem at hand. I say this because, in an attempt to solve this problem, I thought it was the cause of it and followed guides to fix. None of them worked, but I did one discovered that when I uninstalled the driver and rebooted the computer: at the time of the restart, I didn't have the receiver plugged, but he always found an unidentified aircraft. This leads me to believe that the unidentified device is not the receiver, but something else entirely (I don't know what this could be good). However, I'm not a genius when it comes to computers, so I could be wrong.

  As three different computers don't recognize even not be plugged in, I suspect the receiver itself may have been damaged when I put the bag with the controllers and the receiver down in the car and refused to work because of this. However, before you start investing money on two new controllers/receivers/alternatives, I want to ask if there are solutions to the problem.

  Hi and thanks for the answer.

  However, additional speculation in recent days, I managed to find the problem. I peeked inside the receiver and discovered that, as I expected, some had been damaged which prevents operation of the receiver. Since then, I made some adjustments and got the spare parts and the receiver and the controller now working again.

  Nevertheless, thank you for help. In the event of more problems with the controller, I'll be sure to have a look at these links.

• How can I get my xbox 360 to connect to my pc

  I want to get the enternet play my games with my friends

  Hi Howard,.

  If you want to connect your Xbox 360 console to Xbox LIVE and you do not have a router, you can connect your console to your Windows computer and use his internet connection

  Click on the link below and see that it helps.

  http://support.Xbox.com/en-in/Xbox-Live/connecting/win-computer

  Good day!

  Please get back to us if you have any questions.