Unable to get GPRS settings!

I am unable to get GPRS settings in my g2 moto...

Help help...

You can do it manually.

Parameters-> wireless & network-> more...-> Mobile network-> access points-> press + in the upper right corner of the screen.

Tags: Motorola Phones

Similar Questions

  • Unable to get Yahoo as homepage favorite in the Windows XP-based computer after you restore the computer to factory settings.

    Original title: setting up old user account.

    need help please, I use wndows xp service pack 3. This pc is shared with my wife as an account administrator. I come back from pc to the factory settings and all is ok for my account, send everything etc, but on his account, I am unable to get yahoo bt homepage favorite, I am able to do, it's dell page. any help would be appreciated.

    Thank you very much

    Pete

    Hi Pete,.

    1. you receive an error message when you try to change the homepage of Yahoo?

    2. what browser do you use?

    If you use Internet Explorer 7, you can follow this link & check if the problem persists.

    You can't change the home page in Internet Explorer 7


    Important:
    this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows.

    Hope the helps of information.
    Please post back and we do know.

  • Unable to get the Bluetooth Toshiba BT Stac Headset profile in collaboration with mic

    Hello.

    I have problems with my Motorola HT 820 Stereo headset, the Toshiba Bluetooth Stack installed on Vista Home Premium 32 bit laptop.

    I am unable to get the microphone to work at all, so can't use it for Skype / VOIP calls etc. Features such as the A2DP and AVRCP work very well, and I can listen to music via the media player without problems.

    I read in a FAQ on this site, to make sure that I use the installation option custom rather than the quick installation when adding the device, but it seems to make no difference, am I missing a step here?

    In the properties of the device Windows registry, I see the option listed for Bluetooth Mic, but even assigning as device by default does not work.

    I know to plug my headphones on my desktop PC that uses the bluetooth stack Widdcom, can I use the headset/microphone function, but this battery seems to work differently, as I can select option headphones in the bluetooth settings, but I don't see such an interior option Toshiba stack - and I think that's the problem.

    I've updated to the last stack of Toshiba on this website, but this did not help at all.

    Here, any help would be appreciated.

    Concerning

    Matt

    Post edited by: Toxyturvy - wrong spelling

    Hello Matt

    Unfortunately I can't help you with that, but if I remember right here on the BT section that someone has already asked something similar. Please take a little time and see the BT section on this forum.

    You can also visit the FAQ section on http://aps2.toshiba-tro.de/bluetooth/
    Might find something there.

    Good luck!

  • I'm unable to "get out" of the language bar to appear in my taskbar.

    Missing language bar

    Hi all, hope someone can help me solve my problem here. I m unable to "get out" of the language bar to appear in my taskbar. I followed the instructions in the window help by installing the language, but it seems that the "language bar" is not available on my toolbar option.

    tulipmelody, the links provided are order of registry editing which can be placed in the Notepad and run as a batch file.

    Before I provide you with detailed instructions on how to do it, I want you please check and make sure you have an additional language added to the keyboard settings, without him the language bar will not be an option in the menu of the taskbar.

    Add to James's message, follow these steps:
    Click Start-> Control Panel-> regional and Language Options.
    Click on the "Keyboards and languages" tab and then click on "change keyboards.
    Here the tab general, you need to add a secondary language to your keyboard, otherwise you will not be able to display the language bar. To do this, click Add and select the language you want to use, click OK.

    Once you have verified this, I can then provide you with more details on editing the registry. Of course, we want to ensure that it is not necessary first, as other options to resolve this problem. Rami
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Unable to get Windows Mail to send or receive. Get this message error code when you try to send: account: "Windows Mail".

    original title: Windows Mail

    Unable to get windows mail to send or receive.  Get this message error code when you try to send:

    Account: 'Windows Mail', server: 'pop.emailsrvr.com', Protocol: POP3, server response: '.', Port: 110, secure (SSL): no, error number: 0x800CCC18
    0x800cc0E error code received when you configure the ACCT.     POP3 and SMTP servers are: pop3.email.msn.com.  SMTP.email.msn.com.
    To find these server addresses, took some time to locate.  After locating and entering, using authentication
    sign username and password, he kept sign asking repeatedly.
    Any help on these questions would be appreciated.
    POP3 and SMTP servers are: pop3.email.msn.com.  SMTP.email.msn.com.
    To find these server addresses, took some time to locate.

    POP3/SMTP settings for an MSN e-mail account are on this page. That's more than three years, Hotmail includes the MSN e-mail accounts.

    Hotmail has its own support at the Windows Live Solution Centerforums. Please address any other question you may have on one of the forums on the right side of this page.

    Noel

  • Your preference file is damaged or not valid google chrome unable to retrieve the settings

    Hello all,.

    I get this error message when loading google chrome via Windows 7: your preference file is damaged or not valid google chrome unable to retrieve the settings. Any suggestions please let me know.

    Kind regards

    Sugasaff

    Hello Sugasaff,

    Thanks for posting your query on the Microsoft Community.

    I would like to ask you:

    • The problem is specific to a single application?
    • Have you tried using Internet Explorer and check if it works well?

    You can try to uninstall and reinstall Chrome and check if it works very well.

    Refer,

    Uninstall or change a program

    To download and install again, see:

    https://www.Google.com/intl/en/chrome/browser/

    Hope this information was useful.

  • Unable to get Media Center or Media Player to work properly.

    Original title: Windows Media Center & Windows Media Player

    I'm on Windows 7 Home Premium but I am unable to get the Media Center or Media Player to work properly.  I don't understand all of Media Center and Media Player guard locking.  What to do next?

    Hi MickeyDeChenne,

    1. you receive messages or error codes?

    2 did you a recent software or hardware changes to the system?

    You can try the following steps and check if it helps:

    Method 1:

    Try deactivation and activation of Windows Media Player (WMP) and check if it helps.

    a. click the Start button, select Control Panel, click programs and featuresand then click Windows turn on or off features.

    b. uncheck and recheck the option for the multimedia features, or expand media featuresdisable Windows Media Player option by unchecking this option. Wait that the feature is disabled, click OK and restart the computer.

    c. once the computer is restarted, turn it on in the same way by the option to control Windows Media Player . Check if the problem persists.

    See the article:

    Tour of the Windows features turn on or off - Windows 7

    You can repaeat the steps above to turn on Windows Media Center (WMC) also of multimedia features.

    Method 2:

    If the problem is not resolved, try the following steps and check if it helps:

    You can try to run the Windows Media Player settings Troubleshooter and check if it helps:

    Solving the problems of open Windows Media Player settings

    Regarding Windows Media Center appearing do not question, you can try going to the following location and try to start WMC. You can also create a shortcut for the same on the desktop.

    Click Start, type %windir%\ehome\ehshell.exe in start search, and then press ENTER.

    To create a shortcut of the evaluation:

    Right-click on ehshell.exe and select sent to -> the shortcut on the desktop.

  • Update for Sierra and now my Apple music does not appear I have a subscription and I am unable to get my music on the cloud?

    Update for Sierra and now my Apple music does not appear I have a subscription and I am unable to get my music on the cloud?

    Hey there Scotchman2926,

    I understand that you are experiencing some problems with Apple music on Sierra. I have a few suggestions to help you solve this problem. First of all, if you are unable to access the iTunes Store as well as music from Apple, use the information in this article to help resolve this problem:

    If you cannot connect to the iTunes Store - Apple Support

    If this does not resolve the problem, you might try signing out of your Apple ID in iTunes and then connect again.

    Thanks to be come to the communities of Apple Support and let us know how it goes.

    See you soon.

  • Unable to get airplay to connect to my receiver to my PC.

    Unable to get airplay to connect to my receiver.

    Are both the iOS device and Apple TV on the same wireless network?

    All devices receive their network via DHCP configuration?

    Is insulation wireless disabled on the router, at least for the channel that these devices use?

    Have you tried to reboot all devices including the router first?

    TT2

  • Unable to get Netflix on Firefox 39. says "unknown Player error" already uninstalled and re-installed silverlight

    Unable to get Netflix on Firefox 39. says "unknown Player error" already uninstalled and re-installed silverlight

    Thank you for the presentation of reports. HTTPS Everywhere is a great idea, but many sites that are not designed for HTTPS, it causes these mysterious problems.

  • Satellite Pro P100 - error message-"unable to get session notifications.

    Everytime I turn it on I get the error message "unable to get session notifications.
    What is c?
    How difficult or turn it off?

    Thank you

    Hmm... It looks like a 3rd party software notification.
    You may have removed (uninstalled) a program, but the registry contains some bad entries that cause this strange notification.

    You know the free app "CCleaner"? It repairs and cleans them registry and system files. Maybe this program might help to get rid of this message...

    Good luck

  • I'm unable to get the registration code for my Blu - Ray player

    I'm unable to get the registration code for my Blu - Ray player. I followed the instructions and all I get is the statement: device is registered. I can't register for the most part without a valid code. Please let me know how I can get the correct code. Thank you

    If you were able to enter the registration code the first time you tried to save the player before then you don't need to do it again. Just bought this drive? If so, was it a screen or mixed open-box model?

  • Y510 unable to get data from the camera.

    Hello

    I have a Y510 with Windows Vista 32 bit, 3 GB RAM, only 5 weeks. I get this message when I try to use Veriface, "unable to get data from the camera. The camera may have been disconnected or busy. I reinstalled Vista of the State in which the laptop came, but it does not work. I also updated the bios and install other updates were available. I would appreciate any advice.

    Thank you

    Peter

    I wish it was as easy as press Fn + Esc, I looked through an another Y510 our office and managed to find a process that must be set to Auto, the process is KtmRm. This process cannot be disabled, handicapped, or on a time delay, it must be AUTOMATIC.

  • loaded Microsoft combat flight simulator ww11 europe series. Unable to get game start with the joy stick. game with keybord works. gamepad is new logitech 3d pro extrem

    loaded Microsoft combat flight simulator ww11 europe series.  Unable to get game start with the joy stick.  game with keybord works.  gamepad is new logitech 3d pro extrem

    Hi Li-ngme,
     
    (1) have you installed drivers for the joystick correctly?
     
    It seems that the gamepad drivers is not updated for windows 7. Let us know if the gamepad work on other games under Windows 7.

    Try to access the link below and install the drivers for gamepad for windows 7 and even install as an administrator.
    http://www.Logitech.com/index.cfm/441/291&Hub=1&CL=GB, in? WT.z_sp = Image

    If this does not work, try to contact Logitech and check if they have updates on this for windows 7.
     
    ThaThanks and greetings:
    Shalini Surana - Microsoft technical support.
    Visit our Microsoft answers feedback Forumand let us know what you think.

  • Unable to get the windows updates. Get error code 80072EFE. Help!

    Unable to get the windows updates. Get error code 80072EFE.  Help!

    Gary,

    ERROR_INTERNET_CONNECTION_ABORTED 80072EFE

    You may experience temporary errors related to connection when you use windows update or microsoft update to install updates http://support.microsoft.com/kb/836941

    by running the Fixit on this page, you can reset to windows update components.  but, if there is malware present, she will continue to reset the connection to the update servers: how toreset windows update components

    suggest you download and save the Fixit.  then conf is the boot vlean system before you run it:http://support.microsoft.com/kb/971058

    How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7http://support.microsoft.com/kb/929135

    Once the Fixit has been downloaded and the system is started in the pure State, check that the native vista firewall is now on if a 3rd party firewall has been used previously.  now run the Fixit and choose the default mode.  restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode.  turn it back on when he finished the race and updates.

Maybe you are looking for