Unable to get the computer out of safe mode

Similar Questions

• How to get the computer out of safe mode of power

  How to get the computer out of safe mode of power

  Hello jeffg56,

  I understand that you want to leave safe mode, follow the steps below:

  Exit Safe Mode:

  1. Click Start, type msconfig in the search field and press ENTER to open the System Configuration window.

  2. On the general tab of the System Configuration window, select Normal startup, and then click OK.

  I hope this has been helpful, please let me know if you need more help.

  Thank you

• I can't get my computer out of safe mode.

  I can't get my computer out of safe mode. Is there a step I'm missing that the selection of the normal mode? I continue to restart and hit the F12 key to enter the boot menu, I choose start in Normal Mode and it maintains safe boot mode.

  Start in safe mode > type msconfig in run > press enter > click normal startup > go to the Startup tab and uncheck secure boot

  

• need to get my computer out of safe mode, so I can download java

  I need to get my computer our safe mode, so I can download java

  I need to get my computer our safe mode, so I can download java

  While in safe mode...
  Start button > in the search box, type msconfig > press the Enter key > uac prompt > Startup tab > uncheck "Safe Boot" > make sure there is NO tick anywhere > click OK for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• How can I get my computer out of safe mode

  my computer went fail mode without fail for some reason, how can I get normal again.

  [Transferred from Internet Explorer]

  Try restarting your PC and if he went in mode safe once again, then start the search for MSCONFIG and in the start menu uncheck safe startup.

• How can I get my laptop out of safe mode and back 2 normal?

  How can I get my computer out of safe mode

  It is what is on the link below in REVERSE order.
  The link is on the way to get into Safe Mode; but the instructions I give you is out!

  http://www.bleepingcomputer.com/tutorials/tutorial61.html

  Go to the above link >summary > Vista

  Start Vista normally
  Uncheck the boot under the STARTUP tab

  Using the method of System Configuration tool:

  Note: If you have problems to enter Safe Mode using the F8 method, don't use this method to force so that it starts in mode safe. For reasons that why you should read this.

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on start () button.
  3. In the search box of the Start Menu () type msconfig and press enter on your keyboard.
  4. The System Configuration utility will open and you will see a screen similar to the one below.

     
     Figure 8. Vista System Configuration utility

     Click the Startup tab.

  5. You will now be on the screen start as shown below options.

     
     Figure 9. Tab of Vista startup in the System Configuration utility

     Uncheck the box secure boot

  6. Press apply and then press the OK button.
  7. Now, you will see a prompt stating that you must restart the computer to apply the change.

     
     Figure 10. Reboot prompt

     Click Restart to restart your computer.

  See you soon.

  Mick Murphy - Microsoft partner

• I can't get my laptop out of safe mode and Internet explorer__

  I can't get my laptop out of safe mode and in internet explore

  http://www.bleepingcomputer.com/tutorials/tutorial61.html

  Above link has info to enter SM

  Table of contents > Vista

  Alterations of ther reading I've included for you out of SM

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu () type msconfig and press enter on your keyboard.
  4. The System Configuration utility will open and you will see a screen similar to the one below.

     
     Figure 8. Vista System Configuration utility

     Click the Startup tab.

  5. You will now be on the screen start as shown below options.

     
     Figure 9. Tab of Vista startup in the System Configuration utility

     UNCHECK the box labeled Start secure

  6. Press the apply button and then press the OK button.
  7. Now, you will see a prompt stating that you must restart the computer to apply the change.

     
     Figure 10. Reboot prompt

     Click the restart button to restart your computer.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I get my computor out of safe mode and go back to my normal mode?

  How can I get my computor out of safe mode and go back to my regular walk mode?

  Hello

  Are there any error messages when you try to start?

  Start - type in the search box-> find MSCONFIG in top - right click - RUN AS ADMIN

  Startup tab - uncheck secure boot

  If you can not always start in normal mode, try Startup Repair

  This tells you how to access the System Recovery Options or a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• HELP - can't get VIsta system out of safe mode

  Can someone help me? I tried to install a pc game for my granddaughter on my Vista computer. The computer went into safe mode and I can't get it back in normal mode. I tried to reboot (key F8), compensation tab, click Normal, safe mode reboot, but that did not work.

  Then I tried to restore the system to an earlier date, but no earlier dates are available and nothing happens if I manually search for a date.

  Is there anything else I can do to recover my computer in normal mode?

  See if it suits it:

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-Vista

  The Advanced Boot Options menu lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before Windows starts.

  1. start Windows normally.

  If necessary:

  2. the last known good configuration.

  See you soon.

• white screen after update; Unable to get the computer to open even in SafeMode (Sony Viao Vista)

  After you start this morning, had a message saying necessary to revive the updates to take effect.  Rebooted and got blank screen for a long time.  Did a hard STOP.  Have tried rebooting but it just cans.  Have you tried to reboot (drums on the introduction of Microsoft screen), normally in safe mode (with and without networking) - cans after loading files Windows with "Please wait...". ».  Help!

  Download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Could not get computer out of safe mode

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  : my computer is locked in safe mode when I start trying to hit the f8 key when turning and going back on normal startup and tried to type in slui.exe4 in the search at the bottom of the start Panel, Panel and press on enter and enter in the information system all the these have not helped at the time can not use printer and have no sound

  My operating system is windows vista basic family that everything that happened after that someone tried to make my computer run faster

  Since we don't know what the 'someone' has done on your computer - except that it was false and Bad - try a system restore. You use the wrong command for the restoration of the system. Slui.exe is to activate Windows, only not to do the system restore. You have left gives information? Insisting that you turn on the computer?

  To run the system restore, go to the ORB start and in the start search box, type "System Restore" without the quotes. System Restore appears in the result of programs. Click it, enable the UAC prompt and follow the instructions in the wizard.

  If you need more information, post back with more information on your computer and that 'someone' has done. What problems were initially have inspired you to get this dubious help?

  Help us help you:

  http://www.elephantboycomputers.com/page2.html#Tech_Support - See the article "how to write a Post.
  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

  MS - MVP - Elephant Boy computers - don't panic!

• I am unable to get the computer manufacturer to send the disc to reinstall Vista. I tried to do this task almost 3 weeks. I need to reinstall Vista so that I can upgrade to Windows 7 64 bit. Please help me. I have the product code.

  I mistakenly installed the 32-bit version of Windows 7, and I try to install the 64-bit version.  Info on other forums says there is no way to do it without a disk... I do not have with the computer.

  To go from 32 bit to 64 bit, you have to do with a FULL 64-bit version, by performing a clean install. so I don't see what the problem on Vista reinstall is.

  Unless you have Vista 64 bit, it will not help you upgrade to Windows 7 64 bit.

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• My pc is unable to load the program except in safe mode, which is a recent problem. Time must also be reset whenever I start. any suggestions

  At startup the program do not load beyond the xp logo and then a black screen. The only way to load is in safe mode. The clock needs daily update, is it connected?  I can't restore, but might do at the beginning, but not more. My antivirus is also disabled, it's because its in safe mode. Could all this be reduced to a battery of spleen?

  people suggestions.

  Hi Mike,.

  ·         You did changes to the computer before the show?

  Try the following.

  Method 1: Read the following article.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  Method 2: Follow the steps in the article mentioned below.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

• Can't connect to internet unless the computer is in safe mode with networking

  Please, let me apologize first.  This is my first time using this forum and I was not aware of how to create a new thread.  Thank you Steve for helping with this.  Here's my question below:

  I have a Desktop Window Vista Home Basic.  I have great internet connection. I can surf the web in SafeMode with network.  However, when I try to access internet in normal mode, I get an error message: cannot display the Page.  When I click on the link to problem diagnose it indicates that the computer detects a connection from home.knology.net, however, there may be a remote firewall blocking the connection.  Firewall systems only 2 that I know are windows and MacAfee and I disabled both of them.  I contacted the ISP and they state it's the computer.  I just bought the computer on 07-02-08. Any help in this matter would be greatly appreciated.

  Thank you

  Bridgett

  
  

• I am unable to get the compute function to allow me to select the fields that I want to add.  I followed all the instructions I could find but nothing works.  If I click select all or deselect all the options it will do

  Does anyone have a suggestion as to what is the work around?

  Use the space bar.