Unable to get the port forwarding on LRT224

Similar Questions

• I'm unable to get the registration code for my Blu - Ray player

  I'm unable to get the registration code for my Blu - Ray player. I followed the instructions and all I get is the statement: device is registered. I can't register for the most part without a valid code. Please let me know how I can get the correct code. Thank you

  If you were able to enter the registration code the first time you tried to save the player before then you don't need to do it again. Just bought this drive? If so, was it a screen or mixed open-box model?

• Unable to get the Bluetooth Toshiba BT Stac Headset profile in collaboration with mic

  Hello.

  I have problems with my Motorola HT 820 Stereo headset, the Toshiba Bluetooth Stack installed on Vista Home Premium 32 bit laptop.

  I am unable to get the microphone to work at all, so can't use it for Skype / VOIP calls etc. Features such as the A2DP and AVRCP work very well, and I can listen to music via the media player without problems.

  I read in a FAQ on this site, to make sure that I use the installation option custom rather than the quick installation when adding the device, but it seems to make no difference, am I missing a step here?

  In the properties of the device Windows registry, I see the option listed for Bluetooth Mic, but even assigning as device by default does not work.

  I know to plug my headphones on my desktop PC that uses the bluetooth stack Widdcom, can I use the headset/microphone function, but this battery seems to work differently, as I can select option headphones in the bluetooth settings, but I don't see such an interior option Toshiba stack - and I think that's the problem.

  I've updated to the last stack of Toshiba on this website, but this did not help at all.

  Here, any help would be appreciated.

  Concerning

  Matt

  Post edited by: Toxyturvy - wrong spelling

  Hello Matt

  Unfortunately I can't help you with that, but if I remember right here on the BT section that someone has already asked something similar. Please take a little time and see the BT section on this forum.

  You can also visit the FAQ section on http://aps2.toshiba-tro.de/bluetooth/
  Might find something there.

  Good luck!

• Unable to get the windows updates. Get error code 80072EFE. Help!

  Unable to get the windows updates. Get error code 80072EFE.  Help!

  Gary,

  ERROR_INTERNET_CONNECTION_ABORTED 80072EFE

  You may experience temporary errors related to connection when you use windows update or microsoft update to install updates http://support.microsoft.com/kb/836941

  by running the Fixit on this page, you can reset to windows update components.  but, if there is malware present, she will continue to reset the connection to the update servers: how toreset windows update components

  suggest you download and save the Fixit.  then conf is the boot vlean system before you run it:http://support.microsoft.com/kb/971058

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7http://support.microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native vista firewall is now on if a 3rd party firewall has been used previously.  now run the Fixit and choose the default mode.  restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode.  turn it back on when he finished the race and updates.

• Unable to get the automatic updates of Windows.

  Suddenly I'm unable to get the automatic updates of Windows.  When I use Windows fix - it, it is unable to do so, stating that automatic update components need repair.  Is there a way to repair the components?

  Hi Robert,.

  Reset windows update components.

  http://support.Microsoft.com/kb/971058

  Use the automated fix solution, then check windows update to see if it works.

  Additional information: If you are not fully patched for Windows XP SP3, download and install Windows XP SP3 from the link below.

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Ignore the warning text on the professionals and the network installation.

• I reinstalled Windows XP service pack 2-64 bit and now I am unable to get the Windows Update

  I reinstalled Windows XP service pack 2-64 bit and now I am unable to get the Windows Update. Updates are more automatic since the installation and now I get the following message if I try to update manually. Help!

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options: Frequently asked Questions Find Solutions Windows Update Newsgroup To support options: Microsoft online assisted support (no cost for Windows Update issues)

  SP3 is only for 32-bit versions of Windows XP. OP has the 64-bit version of XP Pro...

• Unable to get the Windows updates. Activation of Windows icon "this copy of Windows is not activated." Cannot be enabled. Please notify.

  I was using Windows XP Professional for over 3 years with no problems. I get Windows updates automatically recently, I am unable to get the Windows updates. Activation of Windows icon is now displayed "this copy of Windows is not activated. What is going on?  Tried to reactivate without success.

  I tried with the key of product without success. Please notify. Thank you, Mark to * address email is removed from the privacy *

  I was using Windows XP Professional for over 3 years with no problems. I get Windows updates automatically recently, I am unable to get the Windows updates. Activation of Windows icon is now displayed "this copy of Windows is not activated. What is going on?  Tried to reactivate without success.

  I tried with the key of product without success. Please notify. Thank you, Mark at * address email is removed from the privacy *.

  Click HERE. Follow the instructions. I recommend to use Guided Help.

• Unable to get the windows updates, it returns an error (often 0x8007043c and other similar)

  Original title: can't get windows updates

  I was unable to get the updates of windows - via the feature of automatic update, or through the manual method to access microsoft.com.  When I go to the microsoft update Web site, and it starts to scan my PC, it returns an error (often 0x8007043c and similar).  I tried to run Microsoft FixIt.  It tells me that windows up-to-date devices require to be repaired, but when I run the repair (problem-solving), he continues to run for hours and hours and doesn't do a thing.  How can I remove the software from the Windows Update Agent from my PC and reinstall a new version?

  Hi JosephGPhD,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to follow the steps in the Microsoft Knowledge Base article and check.

  You receive an error message "0x800A01AE" or a "0 x 080070570" error message when you try to connect to the Windows Update Web page or to the Microsoft Update Web page in Windows Server 2003 or Windows XP

  http://support.Microsoft.com/kb/910359

   

  Method 2: If the method above does not help then you can see the article mentioned below and check.

   

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Let us know if that helps.

• Fix it fails Center with the error: unable to get the catalog of the troubleshooter. Error MatsGetSapCatalog failed

  Original title: Fix it center fails.

  Difficulty Center fails with the error:
  Unable to get the catalog of the troubleshooter. Error MatsGetSapCatalog failed
  I can't find the url of re - download.
  It doesn't seem to be at the Download Center.
  Thank you
  Frank C

  Vista Ultimate 64 bit sp2

  

  CF. http://answers.microsoft.com/en-us/protect/forum/mse-protect_scanning/scanning-engine-has-stopped-responding/e0f84bec-2555-4279-bfb7-aff691b8ba8d

• Unable to get the upgrade to Windows 7 purchased to start

  I bought an upgrade to a provider. I have acquired a product key. I invoke Windows Anytime Upgrade according to the directions and the only option is to upgrade to Vista. Then I went to the Microsoft page to buy the product. I have Vista 64-bit with all updates installed on my Toshibe Satellite computer. I ran the Upgrade Advisor and everything was satisfactory.

  Unable to get the upgrade to Windows 7 purchased to start

  I call Windows Anytime Upgrade according to the guidelines

  I have Vista 64-bit

  Windows 7 anytime upgrade: you have Vista or XP currently installed?

  If the product you have Windows 7 'Anytime Upgrade' does not allow to move from XP/Vista to Windows 7. You can buy the product at retail of Windows 7 Upgrade not the ' Anytime Upgrade '.

  Windows 7 'Anytime Upgrade' is for moving from one version of Windows 7 to a higher version, such as Windows 7 Home Premium to Windows 7 Professional.

  You can buy Windows 7 here:

  http://www.microsoftstore.com/store/msstore/cat/CategoryID.44066700

  How to upgrade:

  If you have Vista:

  Update: http://windows.microsoft.com/en-us/windows7/help/upgrading-from-windows-vista-to-windows-7

  Custom installation: http://windows.microsoft.com/en-US/windows7/help/upgrading-from-windows-vista-to-windows-7-custom

• Error: Unable to get the 'platform' of undefined reference property or null

  I am updating a Web site on a computer that had Dreamweaver Cs4 installed as a transfer file from another computer. I get an error (unable to get the 'platform' of undefined reference property or null). The current computer has Windows7. How to upgrade to the operation of the platform within the program? What is the problem?

  What are you trying to do exactly?

  Files created in DW are not specific platform (they are just .html, .css, .js, etc.), but the program itself is when it's one of the older versions of perpetual license / disc.

  Adobe does not swap the platform for something else that current versions, however the current version (PCOC 2014) is not really specific platform more since you can have it installed on two machines, regardless of the platform. So, basically, ranking/cross-platform interchange is not permitted more.

  Product order | Platform, language Exchange

• get the port to the server during redirection between http and https

  Hi, I have the following scenario, where I have to redirect http to https, and vice versa. When I call getServerPort he returned some port is configured for the current regime (https or http). The problem is I have to go the url with the port for the https scheme, in the scenario of http-> https redirect. So the getServerPort method does not provide me that. I don't want to hard code the port numbers because they are subject to change. Is it possible to get the ports configured for the systems supported by the servlet container?

  In the number short. If ports are subject to change, and then store this information in a database and retrieve it from there.

• Unable to connect with RDP after you have configured the port forward

  I have configured my router with port pushing forcefully with port 3389. Now when I try to rdp to the pc from outside I get the following error:

  Remote Desktop cannot connect to the remote computer to one of the following reasons:

  1. remote access to the server is not enabled

  2. the remote computer is disabled

  3. the remote computer is not available on the network

  I checked that all these 3 does not apply to me. I was able to RDP pc (with the local ip address) from another pc in my network home but not from outside. Could someone help me please?

  Is the computer on which you want to connect with Remote Desktop [DRC], IE. the DRC, by using a host address static IP on your LAN? In the contrary case and the computer is restarted its possible its LAN IP address changed by denying any plan of port forwarding you set up in your router. Go to the site CanYouSeeMe and host DRC computer test.

  http://www.canyouseeme.org

  Also, when the connection to make sure that you really test from a client outside the DRC and does not use the public IP address of the router from a local computer on your local network.

  http://theillustratednetwork.MVPs.org/RemoteDesktop/TroubleshootingDiagrams/Basic.html

  Finally you are sure that the public IP address of the router has not changed? If you have a dynamic IP from your ISP, you can use a free as no - IP.com that maps a name to your public IP address. Call using the fully qualified domain name. Many routers support which is a free service like DynDNS for example. You can also download and install a small program on the host of the DRC. The program communicates with the No - IP or DynDNS servers on a regular basis. The server so you know what your current IP address and that map to your fully qualified domain name.

  http://www.no-IP.com/?utm_source=MSN&utm_medium=CPC&utm_term=no%20IP%20.com&utm_campaign=brand+MSN

  http://dyn.com/DNS/

• Problems with static IP setting for the port forward through 2 routers

  I currently have cable internet connected to a router (Linksys E2000 w / v1.0.03 firmware). This router is connected to another router, a Linksys E3200 with firmware v1.0.02. In order to correctly forward ports through the E3200, I understand that I need to set up a static IP address on the router.

  I almost followed the steps in this video, but when I enter all the IP addresses for the static IP address settings, it allows me to access the router configuration page. I try to get the new IP address that I gave (which he tries to move automatically once I have save settings) and the connection times out. I am able to access internet otherwise, however. From here, I have to do a factory reset on the router and start from square one.

  Anyone have any ideas? I'm quite frustrated and would like to get ports forwarded so I can get my server properly set in place.

  1. If it has connected LAN - LAN you will need to disable the DHCP server on the E3200.

  2. the best option would be to use the 'bridge' on the E3200 mode (in the latest firmware) and connect the internet port to the main router.

  3. If connected LAN - LAN (or in Bridge mode) all internet related functions on the E3200, including ports are not relevant. There is no need to set up the port on the E3200 redirects. All shipping is done only on the E2000 and nowhere else.

  4. What is the address LAN IP of the E3200? What is the address LAN IP of the E2000?

• Sony walkman b172 unable to get the certificate of the device to transfer any music! Help!

  I have recenetly had my new sony walkman b172, I just installed and registered the device in my name, when I go to transfer all synchronization musicor music in WMP, it says Error failed to get the certificate for devices, please make sure that its not busy and try again, I tried different USB ports and everything but without success, anyone has any help at all please!

  Exactly the same problem with NWZ-E475. Some albums synchronize very well but others say... .not possible to get the certificate of the device...

  Why since on my old 4 GB Walkman the exact same files have been transferred OK?