Unable to get the updates of Windows Vista

Windows Vista search updates does not end.  the last check was 06/12/2015

Hello

I propose to run the fixit mentioned in the following article and check:

https://support.Microsoft.com/en-us/KB/971058

It will be useful.

Tags: Windows

Similar Questions

  • Unable to download the update for Windows Vista

    Try to download the update for Windows Vista 28. MB (big enough file) download also refers to "KB980248.  He continues to show "failed" and "errors found." 'code 80070017' never had problems to download the updates of windows before.

    0 X 80070017-2147024873 - ERROR_CRC
    Data error (cyclic redundancy check).

    The file is damaged or you need clean temporary files on the hard drive, etc.

    Have you tried a manual download of the update in question?

    Search for a download
    http://www.Microsoft.com/downloads/search.aspx?displaylang=en

  • Unable to complete the update of Windows vista KB2388210 get error 0007065E dt000

    I'm probably infinity less persona 3 to have encountered this.  Fix error MS can enter the line behind me

    I don't know if the installation is harmful to my health. did not cause me to lose sleep, just patience

    CK

    Update for Windows Vista (KB2388210)

    Download size: 3.3 MB

    Hello

    1. What is the exact error message you received?

    2. were you able to install other updates to windows?

    3. have you made changes on your computer?

    I suggest that you perform the clean boot and try to install the windows update.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    Install the update manually to the clean boot

    http://www.Microsoft.com/download/en/details.aspx?ID=12047

  • Error 80070570 code when you try to install the update for Windows Vista for x 64-based systems (KB972145)

    I'm unable to install the update for Windows Vista for x 64-based systems (KB972145).  Whenever I try, I get the error code 80070570.

    0 X 80070570 - ERROR_FILE_CORRUPT
    The file or directory is corrupted and unreadable.

    Perhaps it is the update itself that is corrupted, try to manually download and install the same:
    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=4633c489-A128-441F-803a-d0623edb5667&displaylang=en

    If this does not work maybe reset - WU
    http://support.Microsoft.com/kb/971058/en-us
    How to reset the Windows Update components?

    Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

  • I get the error message as the configuration of the updates in Windows Vista.

    Title: aid to configuring updates

    Windows Vista does not start, it keeps configuration updates, closes and then opens the configuration of updates still once he did this for 4 hours now

    pressing Ctrl alt del does nothing... Please help

    Hello
    You can follow the procedure in the article.
    An update is not installed successfully when you try to install the update in Windows Vista and Windows 7
    http://support.Microsoft.com/kb/949358

  • Unable to get the upgrade to Windows 7 purchased to start

    I bought an upgrade to a provider. I have acquired a product key. I invoke Windows Anytime Upgrade according to the directions and the only option is to upgrade to Vista. Then I went to the Microsoft page to buy the product. I have Vista 64-bit with all updates installed on my Toshibe Satellite computer. I ran the Upgrade Advisor and everything was satisfactory.

    Unable to get the upgrade to Windows 7 purchased to start

    I call Windows Anytime Upgrade according to the guidelines

    I have Vista 64-bit

    Windows 7 anytime upgrade: you have Vista or XP currently installed?

    If the product you have Windows 7 'Anytime Upgrade' does not allow to move from XP/Vista to Windows 7. You can buy the product at retail of Windows 7 Upgrade not the ' Anytime Upgrade '.

    Windows 7 'Anytime Upgrade' is for moving from one version of Windows 7 to a higher version, such as Windows 7 Home Premium to Windows 7 Professional.

    You can buy Windows 7 here:

    http://www.microsoftstore.com/store/msstore/cat/CategoryID.44066700

  • Cannot install the update for Windows vista (KB2718704) a safe mode or after clean window reboot

    I can't install the update for Windows vista (KB2718704), a mode without failure or after clean window reboot.

    What should I do?

    Hello

    ·         Did you do changes on the computer before the show?

    ·         You get the error message?

    ·         You are able to install other updates successfully?

    Follow these methods.

    Method 1: Temporarily disable the security software .

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

    Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

    http://www.Microsoft.com/downloads/en/default.aspx

    Method 4: Follow the steps in the article.

    How to reset the Windows Update components?

    You cannot install some programs or updates

    Note: You must take the backup of the data before performing any installation of windows.

  • Code 80072EE2 error when I try to update the update for Windows Vista (KB972145) tried to install on a week help someone?

    Code 80072EE2 error when I try to update the update for Windows Vista (KB972145) tried to install on a week help someone?

    sweetcheeks,

    0x80072EE2 ERROR_INTERNET_TIMEOUT http://support.microsoft.com/kb/836941/en-us

  • Is it possible to get the files for windows vista, so I can reinstall my system?

    Hello

    Im a user of linux on one machine HP Pavilion dv5-1095eo leisure. IM tired to restart my machine to run a windows OS, so is possible for me to get the files for windows vista. I got the windows key attached under the computer and I don't have any windows CD when I brought the machine.

    Hello:

    You can do your own installation disc Vista too if you wish.

    If you can read your 25-character product key MS, you can make your own Windows Vista installation disc. You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

    When I went to compile the ISO file, ImageBurn gave a message on a WIM file, file and ISO, and if I wanted to burn it in a different format.

    I selected no, make the ISO file.

    It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

    I tested both of them (just before going forward with the actual facility) and they seem to work perfectly.

    Apparently, when you enter the product key, he knows which version of Vista you have.

    http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-VI...

    After you have successfully installed vista, you can download the drivers you need your PC support and driver page.

    Paul

  • In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and the second time error code 8007000D

    In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and error code 8007000D twice. How can you help me solve this problem

    0X8007000D ERROR_INVALID_DATA

    Try to manually download the update and installation
    http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB972145&displaylang=en&sType=s_basic

    It will not appear in your history after a manual installation, but it will show the updates installed in view area. TaurArian [MVP] 2005-2010 - Update Services

  • Unable to install the update to windows? 0x800A01AE & 0 x 080070570

    Unable to install the update to windows? cordially 0x800A01AE & 0 x 080070570, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."

    http://support.Microsoft.com/kb/910359

    Manual procedure to solve the "0x800A01AE" or "0 x 080070570" error messages to manually resolve this problem, follow these steps:

    1. Stop the Background Intelligent Transfer Service and the automatic updates service. To do this, follow these steps:

      1. Click Start, click run, type cmd, and then click OK.
      2. At the command prompt, type the following commands and press ENTER after each command:
        net stop wuauserv
        net stop bits
        output
    2. Rename the Catroot2 folder.

      Note Do not follow this step if you are using Microsoft Windows 2000.

      To rename the Catroot2 folder, follow these steps:

      1. Click Start, click run, type cmd, and then click OK.
      2. At the command prompt, type the following commands and press ENTER after each command:

        net stop cryptsvc
        Ren %systemroot%\System32\Catroot2 oldcatroot2
        net start cryptsvc
        output

      Important Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.

    3. Rename the folder "C:\Windows\SoftwareDistribution":
      1. Click Start, click run, type %any, and then click OK.
      2. Right-click the C:\Windows\SoftwareDistribution folder, and then click Rename.
      3. Type SoftwareDistribution.old, and then press ENTER to rename this folder.
    4. Save the files used by Windows Update and Microsoft Update. To do this, follow these steps:
      1. Click Start, click run, type cmd, and then click OK.
      2. At the command prompt, type the following commands, press ENTER after each command, and then click OK every time that you receive a verification message:
        regsvr32 c:\windows\system32\wuapi.dll
        regsvr32 wuaueng1.dll
        regsvr32 c:\windows\system32\wuaueng.dll
        regsvr32 c:\windows\system32\dllcache\wucltui.dll
        regsvr32 wups2.dll
        regsvr32 c:\windows\system32\wups.dll
        regsvr32 wuweb.dll
    5. Start the service of automatic updates, Background Intelligent Transfer and the event log service. To do this, follow these steps:
      1. Click Start, click run, type cmd, and then click OK.
      2. At the command prompt, type the following commands and press ENTER after each command:
        net start bits
        net start wuauserv
        net start Eventlog
        output

        Solved...!

    Best regards, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."

  • Windows vista Home premium recovery question - how to get the source for windows vista home edition premium as the recovery does not work since the recovery partition

    How to get the source to windows vista Home premium recovery is not from the recovery partition and gives me an error message

    Hello

    Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

    they do it for a nominal cost of $

    or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

    Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

    they contain all versions of vista

    This is the product key that determines which version of vista is installed

    http://www.theeldergeek.com/Vista/vista_clean_installation.html

    How to replace Microsoft software or hardware, order service packs and replace product manuals

    http://support.Microsoft.com/kb/326246

  • I can't install the update for Windows Vista Service Pack 1 (KB936330). I get error code 800F081F & dt000.

    I tried to solve this problem, almost every day since the 01/08/2012 a period of 3 to 7 hrs @ a time, following troubleshooting instructions everything including the fix It Center without success. I even tried to do it manually.  I need a disk to achieve? Please give me detailed instructions thoroughly. Is this a common problem with Windows Vista.

    What are error codes: 800F081F & dt000

    Hello

    1. have you made changes on the computer recently?

    2 is the issue specific to this update?

    3. are you able to install other updates successfully?

    4. What is the brand and model of the computer?

    5 all the troubleshooting steps you have done?

    Try these steps and let me know the status.

    Method 1.

    I suggest you follow the steps in this article.

    Problems with the installation of the updates: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-installing-updates

    Method 2.

    Clean boot : Try to set up your computer in a clean boot state and check if you are able to install the update. Tuning your system to start in mode minimum state helps to identify third-party applications or startup items are causing the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
    http://support.Microsoft.com/kb/929135

    Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

    Disable Firewall: turn enable or disable Windows Firewall: http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

    Note:

    Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you need to disable temporarily to install other software, you must activate it as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 3.

    Learn how to install Windows Vista Service Pack 1 (SP1): http://windows.microsoft.com/en-us/windows-vista/Learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

    Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

    Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate. The virus scanner is provided so that the computer is virus-free before you start to install the updates.

    Method 4.

    The system update tool scans inconsistencies in the computer where it is installed. It usually takes less than 15 minutes to run the scan. However, the tool might take much longer on some computers. Although the progress bar seems to stop, the analysis is still running and you should not cancel the update.

    The system tool that corrects problems with Windows Update is available for Windows 7, Windows Vista: http://support.microsoft.com/kb/947821

    For reference:

    Windows Update 800F081F: http://social.technet.microsoft.com/Forums/en-US/itprovistasetup/thread/2cf14002-250f-4cd3-baab-185b13d1e501/

    I hope this helps.

  • I'm getting error 646 when trying to get an update for windows vista (KB973917). I could manually download other updates, but I can't find it. Help!

    I get the error 646 when trying to update for windows vista (KB973917). I was able to update manually when I got this error but I can't find where to download this update.

    KB973917 (who is NOT a security update although it is security related) is only available through Windows Update.

    Chances are protections in real-time to your antivirus or internet security suite (for example, Norton 360;) Norton Internet Security; etc.) is involved here. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • my wireless does not work when I download the update for Windows Vista (KB2753842) security

    After an automatic download of Windows security update my wireless card did not work. He could not find a wireless networks that she normally

    the fact. When I used a LAN cable I internet connection.
    When I did a system restore to exclude the update of Windows my wireless card security worked perfectly.
    The same thing has just happened and once again had to do a system restore to get a wireless internet network connection. I can only assume that the Windows Security Update for Windows Vista (KB2753842) is the problem.
    Please indicate if this update is critical and if this is the case, what can I do to make sure my wireless card working?
    Thank you.
    Roy

    Thank you very much for your answer.

    I have now solved the problem by using the network connection software to diagnose and repair the problem. My wireless network now works with the update in question.

    Kind regards

    Roy.

    Hi royhorrobin,

    Please report the problem to the Microsoft Community Forum.
    We will help you solve the problem.
     
    1. What is the brand and model of the computer?
    2. do you get an error message?
     
     
    We would like to tell you that this is a critical update...
    Find information here:

    Here are some steps that you can follow:
     
    Method 1:
    Step 1: Restore the system to the United Nations-isntall the software update.
    Refer
    What is system restore?
     
    Step 2: Put the computer to boot, with warning...
    From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
    Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135
     
    Step 3: Download and install the update manually to the clean boot.

    Method 2:

    Try to update the Wireless driver and check to see if the same problem happens.

    a. click on start
    b. right click on computer
    c. click Properties
    d. click on Device Manager on the left hand side

    e. in the list of hardware categories, find the device you want to update, and then double-click the device name.
    f. click on the driver tab, click Update driver and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    For more information, see:


    Method 3:
    Also, try the steps from the link below:
     
    Hope above methods solves the problem. If the problem persists, you can write back to us and we will be happy to help you further.

Maybe you are looking for