Unable to get the virtual keyboard.

Similar Questions

• Unable to get the virtual networks on the internet...

  Hello

  Can someone help me configure this network... I can't get him VLAN 50 and 100 to access internet, I that's all

  Assistant to the void anywere?

  I put in a drawing of my network... pls ask if its anyting info/settings I need to check...

  Thx anyway

  Hi Joar, if your goal is to obtain VLAN 50 and 100 for the internet, these need DHCP service VLAN default router specified as 192.168.2.1 for 50 VLANS and 192.168.3.1 for 100 of VLAN. Once you specify the default router, you will notice that your client lease will have a default gateway 192.168.3.1 and 192.168.2.1 respectively.

  On the router RV042, first enable multiple subnet in IPv4 tab click the button activate multiple subnet, then type the ip address of LAN 192.168.3.1 with mask 255.255.255.0 and then make a second entry 192.168.2.1 with mask 255.255.255.0 and record it.

  Once this is done, you need to do a few static routes on router

  IP address of destination - 192.168.3.0 mask 255.255.255.0 Gateway 192.168.3.1 number of sections 1

  IP address of destination - 192.168.2.0 mask 255.255.255.0 Gateway 192.168.2.1 number of sections 1

  The static route must be done correctly, otherwise any subnet, the router is not a member of the will not work.

  -Tom
  Please mark replied messages useful

• Via the virtual keyboard input string.

  Hello

  I'm trying to get a string input from the virtual keyboard (if I change the name of players). I was hoping that virtual keyboard stuff that would do for me, but it brings just the keyboard, not the entry dialog box too. Y at - it a dialog box simple fun that I can use to get a string modified via the keyboard, without writing the entire bad editing functions myself?

  Thank you

  Steve.

  Please take a look at the BlackBerry native samples on github.

  There is here a sample of "dialogue".

  Our dialogue in bits/s service is what you described.

• 98% has FAILED: unable to reconfigure the virtual destination computer. Linux machine

  I'm trying to convert a Linux x 64 machine and get this error at 98 percent.

  «FAILED: unable to reconfigure the virtual machine of destination.»

  I attached the logs, please help.

  Hello

  Your problem is the same as in Linux P2V: no space is available on the device

  I recommend that you use Converter 6.1, it adds automatically more space on the volume / Boot to avoid these problems.

  HTH
  Plamen

• "Unable to create the virtual SCSI device to the scsi: 0:0" import *. EGGS in ESXi 5.1u2

  Hi, I need to deploy a VM of *.ova in my cluster with 5.1 ESXi hosts u2 (1900470), but when I try to run it I get this error:

  Unable to start the virtual machine.

  Power DevicePowerOn module has failed.

  Unable to create the virtual SCSI device for scsi0:0, ' / vmfs/volumes/51e7fc6b-85806744-fb38-0021286bb22a/xxx.vmdk'

  Unable to create the virtual device. Stack 16 or 255 sectors per track is not supported.

  
  

  The same deployment works in another cluster with 5.1 ESXi hosts (700733) and on my vmware workstation 10.

  I have tryied compatibility material upgrade\downgrade with wmware workstation and download directly to my host but still do not

  I formatted the hard drive hard by ssh and readded to the inventory, I tried to convert vm to work cluster... nothing to see...

  Any suggestions? Thank you

  Solved! I don't know why but the import of virtual machines with 5.1u2 ESXi, heads, and sectors in *.vmdk file are reversed:

  BEFORE:

  ddb.geometry.biosHeads = "16".

  ddb.geometry.biosSectors = "255".

  DDB. Geometry.Heads = "16".

  DDB. Geometry.sectors = "255".

  AFTER:

  ddb.geometry.biosHeads = "255".

  ddb.geometry.biosSectors = "16".

  DDB. Geometry.Heads = "255".

  DDB. Geometry.sectors = "16".

  Connect to a host with SSH and editing *.vmdk file with VI will be the virtual machine starts without problems!

• Unable to start the virtual machine after restoration

  Guests including Test host: ESXi 5.1.0.1065491

  Vm problem: 32-bit, Server 2003

  I use Veeam Backup & Restore 6.5 to back up my vm.  I always do a test restore to ensure that my backups are good.  I'm having a problem with a restore.  The 32-bit Server 2003 vm starts just fine on the main host it runs on.  All the vm are 64-bit except for one who is a 32-bit Server 2003 vm.  Restoring the machine virtual and implemented on a host except the 32-Bit vm Server 2003 test.  After restoration and trying power to the top, I get the following error:

  Unable to start the virtual machine.

  Turn on VPCM module has failed.

  Viewed performance counters require version 3 or greater of architectural performance monitoring.

  Anyone know if there is a fix for this problem?

  TIA,

  Mux

  I assume you are using different hardware (CPUs, the BIOS settings) for VMS restored!

  The virtual machine has VPCM enabled, which causes the problem. You can either disable it in vSphere Web Client (you can do this in the vSphere Client Windows), or directly modify the .vmx VM by setting vpmc.enable to "FALSE".

  For how toggle this setting in the Web Client see allow virtual in the Web Client vSphere CPU Performance counters. If you want to edit the .vmx file manually, you need to delete/re-add the VM from the inventory or recharge (see http://kb.vmware.com/kb/1026043)

  André

• Unable to create the virtual disk: fault. RestrictedVersion.summary

  Hello

  Im trying to create a virtual disk using the CLI on ESX4i.  The script is:

  vmkfstools.pl - Server 10.190.2.51 - c 20 g d eagerzeroedthick - a free /vmfs/volumes/Internal/test.vmdk

  When the script runs I get error: unable to create the virtual disk: fault. RestrictedVersion.summary

  Can someone tell me why please.  Im trying to create a disk of 20 GB with adapter free with eagerzeroedthick on my internal called storage, (no subdirectory).

  The file system is THAT VMFS 3.33 maximum file size is 256 GB.  The block size is 1 MB.  If it is the block size that is the problem how can I easily change?

  It's in a laboratory, not a production environment.  I need the flag eagerzeroedthick like Im trying to create a passive active cluster node MSCS 2 on a single physical node with 2 machines VMS.

  Thank you.

  Mike.

  If you use the free version of ESXi (U4 and later versions), access to tools like the VIMA API are read-only.

  -Matt

  VCP, vExpert, Unix Geek

• I'm unable to get the registration code for my Blu - Ray player

  I'm unable to get the registration code for my Blu - Ray player. I followed the instructions and all I get is the statement: device is registered. I can't register for the most part without a valid code. Please let me know how I can get the correct code. Thank you

  If you were able to enter the registration code the first time you tried to save the player before then you don't need to do it again. Just bought this drive? If so, was it a screen or mixed open-box model?

• After the upgrade to win10 does not show the virtual keyboard in the taskbar

  After the Win10 the virtual keyboard does not show in the taskbar when you use programs that require to connect and it does not appear iwhen attempt to use Word (version Office365). These programs are therefore unusable, unless it is a workaround.  Does anyone know how to solve this or a work around for it?

  Hello m875,.

  What 'Tablet' do you use?

  I improved my tablet of 8 flow and had no problems.

  If you go to settings > devices > typing, you can enable and disable certain functions of touchpad.

  The last two options on the bottom are disabled by default. Can you turn those on to see if this gives you what you need?

  (Automatically display the touch keyboard in glass mode apps...)

  Once, when I type a mailbox type, the keyboard will appear.

  Does that help? Let me know.

• Unable to get the Bluetooth Toshiba BT Stac Headset profile in collaboration with mic

  Hello.

  I have problems with my Motorola HT 820 Stereo headset, the Toshiba Bluetooth Stack installed on Vista Home Premium 32 bit laptop.

  I am unable to get the microphone to work at all, so can't use it for Skype / VOIP calls etc. Features such as the A2DP and AVRCP work very well, and I can listen to music via the media player without problems.

  I read in a FAQ on this site, to make sure that I use the installation option custom rather than the quick installation when adding the device, but it seems to make no difference, am I missing a step here?

  In the properties of the device Windows registry, I see the option listed for Bluetooth Mic, but even assigning as device by default does not work.

  I know to plug my headphones on my desktop PC that uses the bluetooth stack Widdcom, can I use the headset/microphone function, but this battery seems to work differently, as I can select option headphones in the bluetooth settings, but I don't see such an interior option Toshiba stack - and I think that's the problem.

  I've updated to the last stack of Toshiba on this website, but this did not help at all.

  Here, any help would be appreciated.

  Concerning

  Matt

  Post edited by: Toxyturvy - wrong spelling

  Hello Matt

  Unfortunately I can't help you with that, but if I remember right here on the BT section that someone has already asked something similar. Please take a little time and see the BT section on this forum.

  You can also visit the FAQ section on http://aps2.toshiba-tro.de/bluetooth/
  Might find something there.

  Good luck!

• The disappearance of the virtual keyboard Pro iPad support

  For some reason, the virtual keyboard on my iPad pro just disappears and can not be found. This happens intermittently and it is very frustrating. Does anyone else have this experience?

  Are you connected any keyboard bluetooth for iPad Pro?   If so, it is probably auto-login when you come into 30 feet about this keyboard.  Go to the BlueTooth when you have this problem and see if there is a device connected keyboard when you have no keyboard.   If so, disconnect it from settings.

  Hope that helps

• Unable to get the windows updates. Get error code 80072EFE. Help!

  Unable to get the windows updates. Get error code 80072EFE.  Help!

  Gary,

  ERROR_INTERNET_CONNECTION_ABORTED 80072EFE

  You may experience temporary errors related to connection when you use windows update or microsoft update to install updates http://support.microsoft.com/kb/836941

  by running the Fixit on this page, you can reset to windows update components.  but, if there is malware present, she will continue to reset the connection to the update servers: how toreset windows update components

  suggest you download and save the Fixit.  then conf is the boot vlean system before you run it:http://support.microsoft.com/kb/971058

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7http://support.microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native vista firewall is now on if a 3rd party firewall has been used previously.  now run the Fixit and choose the default mode.  restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode.  turn it back on when he finished the race and updates.

• Unable to get the automatic updates of Windows.

  Suddenly I'm unable to get the automatic updates of Windows.  When I use Windows fix - it, it is unable to do so, stating that automatic update components need repair.  Is there a way to repair the components?

  Hi Robert,.

  Reset windows update components.

  http://support.Microsoft.com/kb/971058

  Use the automated fix solution, then check windows update to see if it works.

  Additional information: If you are not fully patched for Windows XP SP3, download and install Windows XP SP3 from the link below.

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Ignore the warning text on the professionals and the network installation.

• I reinstalled Windows XP service pack 2-64 bit and now I am unable to get the Windows Update

  I reinstalled Windows XP service pack 2-64 bit and now I am unable to get the Windows Update. Updates are more automatic since the installation and now I get the following message if I try to update manually. Help!

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options: Frequently asked Questions Find Solutions Windows Update Newsgroup To support options: Microsoft online assisted support (no cost for Windows Update issues)

  SP3 is only for 32-bit versions of Windows XP. OP has the 64-bit version of XP Pro...

• Unable to get the Windows updates. Activation of Windows icon "this copy of Windows is not activated." Cannot be enabled. Please notify.

  I was using Windows XP Professional for over 3 years with no problems. I get Windows updates automatically recently, I am unable to get the Windows updates. Activation of Windows icon is now displayed "this copy of Windows is not activated. What is going on?  Tried to reactivate without success.

  I tried with the key of product without success. Please notify. Thank you, Mark to * address email is removed from the privacy *

  I was using Windows XP Professional for over 3 years with no problems. I get Windows updates automatically recently, I am unable to get the Windows updates. Activation of Windows icon is now displayed "this copy of Windows is not activated. What is going on?  Tried to reactivate without success.

  I tried with the key of product without success. Please notify. Thank you, Mark at * address email is removed from the privacy *.

  Click HERE. Follow the instructions. I recommend to use Guided Help.