Unable to install Microsoft update (not Windows)... 0x800A01AE

Similar Questions

• Unable to install the update to windows? 0x800A01AE & 0 x 080070570

  Unable to install the update to windows? cordially 0x800A01AE & 0 x 080070570, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."

  http://support.Microsoft.com/kb/910359

  Manual procedure to solve the "0x800A01AE" or "0 x 080070570" error messages to manually resolve this problem, follow these steps:

  1. Stop the Background Intelligent Transfer Service and the automatic updates service. To do this, follow these steps:
     1. Click Start, click run, type cmd, and then click OK.
     2. At the command prompt, type the following commands and press ENTER after each command:
        net stop wuauserv
        net stop bits
        output
  2. Rename the Catroot2 folder.

     Note Do not follow this step if you are using Microsoft Windows 2000.

     To rename the Catroot2 folder, follow these steps:

     1. Click Start, click run, type cmd, and then click OK.
     2. At the command prompt, type the following commands and press ENTER after each command:
        
        net stop cryptsvc
        Ren %systemroot%\System32\Catroot2 oldcatroot2
        net start cryptsvc
        output

     Important Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.

  3. Rename the folder "C:\Windows\SoftwareDistribution":
     1. Click Start, click run, type %any, and then click OK.
     2. Right-click the C:\Windows\SoftwareDistribution folder, and then click Rename.
     3. Type SoftwareDistribution.old, and then press ENTER to rename this folder.
  4. Save the files used by Windows Update and Microsoft Update. To do this, follow these steps:
     1. Click Start, click run, type cmd, and then click OK.
     2. At the command prompt, type the following commands, press ENTER after each command, and then click OK every time that you receive a verification message:
        regsvr32 c:\windows\system32\wuapi.dll
        regsvr32 wuaueng1.dll
        regsvr32 c:\windows\system32\wuaueng.dll
        regsvr32 c:\windows\system32\dllcache\wucltui.dll
        regsvr32 wups2.dll
        regsvr32 c:\windows\system32\wups.dll
        regsvr32 wuweb.dll
  5. Start the service of automatic updates, Background Intelligent Transfer and the event log service. To do this, follow these steps:
     1. Click Start, click run, type cmd, and then click OK.
     2. At the command prompt, type the following commands and press ENTER after each command:
        net start bits
        net start wuauserv
        net start Eventlog
        output

        Solved...!

  Best regards, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."

• I was unable to install Microsoft Chart on Windows XP to access to my. CHT files.

  I have a lot of files created by a very old program, Microsoft Chart.  The file extension is. CHT.  I was unable to install Microsoft Chart on Windows XP.  I need to find a way to read the old files and convert them in a modern format.

  original title: microsoft graph

  Victorvan

  My guess would be Dos 5.0 and Windows 3.11.

  Which are both a very long downtime of support by Microsoft.

• WINDOWS MESSAGE "UNABLE TO INSTALL MICROSOFT UPDATES"

  I received a window of MICROSOFT to install UPDATES, in doing so, after clicking on 'Install' message says "UNABLE to INSTALL UPDATES"

  You receive errors related to updates?

  1. open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. in the left pane, click view update history.
  3. find an update for Windows that has failed to install, and then double-click the update to view more information.
  Updates that have failed to install will display failed under status, next to the name of update.
  4. in the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.
  5. click on the links in the dialog box Windows Update under more information or help and Support to try to solve the problem, then try to reinstall updates by using Windows Update in Control Panel or by mail with the error code and maybe someone may be able to help others.

  and/or

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Save the Windows Update engine files
  http://support.Microsoft.com/kb/326253

  TaurArian [MVP] 2005-2010 - Update Services

• Install the updates of Windows 7 not Windows 10

  I have more than 30 windows 7 selected updates and when I click OK it brings back me to the GET started installing Windows 10 screen. I want to install the updates, not Windows 10 and can't find a way to do

  Do you plan on installing Windows 10 soon?

  If this isn't the case - get rid of advertising for it in this way:

  Copy and paste the text below (and especially) the obvious markers in a text file, save it as "DisableGWX.reg")<-- changing="" even="" the="" file="" extension="" -="" if="" you="" cannot="" see="" it,="" you'll="" have="" to="" change="" your="" windows="" explorer="" view="" a="" bit="" to="" make="" this="" easier)="" and="" then="" use="" that="" (right-click="" on="" it,="" merge="" it="" into="" your="" registry)="" to="" disable="" the="" upgrade="" 'pushiness'="" you="" are="" seeing. ="" restart="" to="" get="" the="" full="">

  -COPY EVERYTHING BELOW THIS LINE-

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\GWX]
  "DisableGWX" = DWORD: 00000001

  [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate]
  "DisableOSUpgrade" = DWORD: 00000001

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\OSUpgrade]
  "AllowOSUpgrade" = DWORD: 00000000
  "ReservationsAllowed" = DWORD: 00000000

  -COPY EVERYTHING ABOVE THIS LINE-

  Once this is done, you should be without the notification and your Microsoft Updates must return to its normal state.  If you ever want to upgrade to Windows 10 new (remember, this is a work in progress and if you upgrade already on this system and active - there is a license for Windows 10 you'll never pay for related to this individual machine for the life of this individual machine) you can probably use the media creation tool to make * or * reverse the registry values (all above (: 00000001 becomes: 00000000 and all DWORD: 0-0000000 becomes: 00000001) and save this file and MERGE again.  Restart and you are back where you were before.

  * TIP * for everyone out there.  One thing I saw not advertised on the option of restoration of 30 days you have with Windows 10 is that * if * you run the media creation toolat any point in these 30 days, it BREAKS the ability to restore - even if you did just to create an ISO image, so you should have the installation media to continue.  That's because this tool recreates the $' Windows. ~ BT' and ' $Windows. ~ records of the WS on the root of your C drive and these two folders and their content after the upgrade as well as the "Windows.OLD" folder (the only 'visible by default' one of the three) are all necessary for the process of restoration work.

  It's a little 'reflection', but the images (animated ones) could be useful at least some number of words is above this line...

  

  (Animated - GIF to display in a web browser for full effect.)

  (Same basic steps for Windows 7 users...)

  ... and JUST in CASE WHERE someone does not know how (in Windows 8.1) put in place their system so that they can see the file Extensions (the letters after the dot in filenames)--> here is a GIF to show you how:

  

  (Animated - GIF to display in a web browser for full effect.)

  (Yes, there are some similar settings in Windows 7 to see the file extension.)

• Error 80070570 code when you try to install the update for Windows Vista for x 64-based systems (KB972145)

  I'm unable to install the update for Windows Vista for x 64-based systems (KB972145).  Whenever I try, I get the error code 80070570.

  0 X 80070570 - ERROR_FILE_CORRUPT
  The file or directory is corrupted and unreadable.

  Perhaps it is the update itself that is corrupted, try to manually download and install the same:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=4633c489-A128-441F-803a-d0623edb5667&displaylang=en

  If this does not work maybe reset - WU
  http://support.Microsoft.com/kb/971058/en-us
  How to reset the Windows Update components?

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Virus & spyware definitions update failed. error code: 0x8024402c. Error description: Microsoft Security Essentials was unable to install the updates of definition, because the proxy server or target server names is not resolved.

  Virus & spyware definitions update failed.

  error code: 0x8024402c.

  Error description: Microsoft Security Essentials was unable to install the updates of definition, because the proxy server or target server names is not resolved.

  Here is an article that meets your specific error message regarding updates:http://support.microsoft.com/kb/900936.  I am surprised that the error occurs with all the updates, but there may be a difference between them that causes the problem for definitions, but not for others.  I hope that this will solve the problem.

  If this does not help, please transfer your question in Forum Windows Update:http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where updates experts will be happy to help you.  Please post with the information requested here:what to post in the Windows Update forum

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Wat (windows activation technologies)... I have windows 7 rtm... when I install this update, my windows are not authentic... why?

  Wat (windows activation technologies)... I have windows 7 rtm... when I install this update, my windows are not authentic... why?

  Here is a possible explanation:

  Windows 7 displays "Windows is not genuine" with the code 0x80070005 error
  http://support.Microsoft.com/kb/2008385 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• security update were not installed security update for Windows XP (KB956572) (update 1 of 1)...

  security update were not installed security update for Windows XP (KB956572) (update 1 of 1)... The amendments failure disappeared many times
  kindly help to solve

  Hi DEVOO,.

  Follow the steps listed in the link below: how to troubleshoot Windows Update, Microsoft Update and Windows Server Update Services installation issues: http://support.microsoft.com/kb/906602/

  Then install the standalone update package. You can download the stand-alone version of the link below: http://www.microsoft.com/downloads/details.aspx?familyid=73d2324f-be59-4b0c-b1ac-9876a13c2c03&displaylang=en and check if the problem is resolved.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to install Microsoft Update (as opposed to using Windows Update), I get the error number: 0 x 80070002

  When I try to install Microsoft Update (as opposed to using Windows Update), I get the error number: 0 x 80070002

  Hello

  Look in Control Panel - updates of Windows to see what is the KB and post it here. It can indeed not necessary it and
  be able to make a right click on it and HIDE. Let us know what the update is so we can help advise.

  Also, if you don't need it you can try to download it here.

  Microsoft Download Center - research on KBxxxxxx the number of update for anchor xxxxxx
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to the place where your put it - click on - RUN as ADMINISTRATOR

  If you need to fix the error:

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  Windows Update Error 80070002http://windowshelp.microsoft.com/Windows/en-us/help/c5f4d9e0-3eb6-426b-8118-0cedf489a75f1033.mspx#EJH

  Fix Error 80070002 when using Windows Update in Vista
  http://www.mydigitallife.info/2007/12/21/fix-Error-80070002-when-using-Windows-Update-in-Vista/
  Error Code 0 × 80070002 during Windows Vista SP1 Setup Install - SP2 might have similar problem
  http://www.tipandtrick.NET/2008/error-code-0x80070002-during-Windows-Vista-SP1-Setup-install/

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I'm unable to install one of my windows update to Windos XP - Home Edition, getting errror: 80004005

  I'm unable to install one of my windows update to Windows XP - Home Edition.  How to find what is the cause and how to fix this problem?

  MatsBoot.exe - fatal error... Errror CLR: 80004005 and says that "this program will now terminate.  What should I do now?

  You may receive error code 0 x 80004005 and other error codes when you try to start a Windows XP-based computer

  http://support.Microsoft.com/kb/914232>

  UTC/GMT is 21:12 Wednesday, June 6, 2012

• Vista does not load after that install Microsoft Update error the breakpoint of the exception. "A breakpoint has been reached (0 x 80000003) occurred in the application at location 0x73eb764a.

  Original title: Vista does not load after you install Microsoft updates

  A Dell Inspiron. Updates have become available and have been installed. Next time the laptop was put on it does not start, it was all there on the screen was the dotted line down and after some time a black screen.
  I tried running the recovery and I get the message "the breakpoint exception. "A breakpoint has been reached (0 x 80000003) occurred in the application at location 0x73eb764a.
  At the time that the laptop does not work and I have no idea what updates have been downloaded and installed.

  Hello

  Try the methods provided below and check if that helps.

  Method 1:

  Step 1:

  Try to boot in safe mode with network and check if you are able to boot to the desktop.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you are able to start the office try to download and run a system scan using the Microsoft Safety Scanner full and check if that helps.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:
  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  See also:

  How to remove a computer virus?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Method 2:

  Clean boot

  If the problem does not persist in safe mode you can also perform the clean boot.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3:

  Try the system restore by using the System Recovery Options.

  The System Recovery Options menu is on the Windows installation disc. The menu can also be installed on your drive hard if your computer has preinstalled recovery options.

  For more information click on the link below.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Please keep us updated on the State of the question so that we can help you further.

• Satellite L300 - I can not install an update for Windows Vista

  I can not install an update to Windows Vista after you restore laptop (satellite L300) to factory settings. Tried to install with automatic updates and download of the update on your computer. What auto-update error: 8024 to 000.

  When you try to manually install SP1 getting error: 0800FFFF. I tried to disable the firewall, Defender and the UAC. Someone with such ideas?

  The Windows Update 8024 A 000 error Code means THE NOSERVICE WU E. This translates as UA was impossible for incoming calls to THE service.

  I would like for you to perform general troubleshooting steps for Windows Update.

  This diagnosis is generally applied to all Windows Update related issues.

  Stop Windows Update services *.
  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. If you receive a user account control notification simply click on continue.
  3. at the command prompt, type the following commands and press ENTER after each command.
  net stop wuauserv
  net stop bits
  net stop cryptsvc
  4 Please, do not close the command prompt window.

  * Rename Windows Update records *.
  1. at the command prompt, type the following commands and press ENTER after each command:
  2 ren %systemroot%\System32\Catroot2 Catroot2.old
  3 ren %systemroot%\SoftwareDistribution SoftwareDistribution.old
  4 Please, do not close the command prompt window.

  Registration of DLL's on Windows Update *.
  1. Please copy and paste the following text in a new Notepad document and save the file as WindowsUpdate.BAT
  2 if it is registered correctly the icon will go from a Notepad file in .BAT file which has two blue toothed wheels as its icon.

  Restarting Windows Update services *.
  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. If you receive a user account control notification simply click on continue.
  3. at the command prompt, type the following commands and press ENTER after each command.
  net start wuauserv
  net start bits
  net start cryptsvc
  output
  4 now, please check the updates via Windows Update to determine if the problem has been resolved.

• My computer installed all updates for Windows (I was invited to do so). Now, I can not use citrix to access things. Frustrating

  My computer installed all updates for Windows (I was invited to do so).  Now, I can not use citrix to access things. Frustrating

  Supported Citrix or your COMPUTER administrator will be able to help with this.

  Look in the event log to see if anything relevant is registered.

  John

• I can't install the updates of Windows on Vista. Error code is that 80246008-Windows Update encountered an unknown error.

  I can't install the updates of Windows on Vista. Error code is that 80246008-Windows Update encountered an unknown error.  Help had two suggestions being to check to see if the Background Intelligent Transfer Service is running, and I don't have the service installed, it is the problem.  What should I do?

  Hi Nita,

  Thanks for posting your question in the Microsoft Community forums.

  The description of the problem, I see that you are unable to install Windows Update and receive the error code 80246008. I also see that the PIECES is not in services.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  The 80246008 error code may occur if the (BITS) Background Intelligent Transfer Service is not started or is configured incorrectly.

  I suggest you try the procedure described in the article and see if it helps.

  Error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site: "0 x 80246008.
  http://support.Microsoft.com/kb/956706

  Let us know the status of the issue after you perform the troubleshooting steps. If you need to get assistance or information about this problem with Windows Update, I'll be happy to help you. We, at tender Microsoft to excellence.