Unable to join the network "Home" with the iPhone

Similar Questions

• Unable to join the homegroup on new Inspiron 15 5559

  I had a residential group put in place for a good while on 3 computers desktop and an old Tower, but my new laptop Dell Inspiron 15 5559 with 10 Windows fails to reach.  I get to the point of putting in the right password and clicking NEXT, then the bar keeps of moving from left to right for several minutes, then stops without any messages and not to join.

  Here are the details.  Computer of One Office (a Dell Inspiron 630 with Windows 7 Pro), a former HP with Windows Pro 10 office, an old house built office with Windows 10 Pro (64-bit), and an old Toshiba laptop with 64 bit Windows 7 Home.  All these joined the homegroup very well.  In addition to the homegroup, I have the file & printer sharing power with 4 of them.  On the Dell desktop computer, I have 9 folders and two shared printers.  The new laptop Dell can access shared folders, it is just unable to join the homegroup.  I created the homegroup because I had problems to access 2 shared printers (a Canon IP1600 inkjet and laser Samsung ML-2525) with 10 windows, in case you're wondering why I'm not just with the file & printer sharing instead of homegroup.

  In any case the key is that everything on this new Dell laptop works fine except that I can not join the homegroup, and I'm very curious as to why not.  I did full virus scans with Defender and Norton 360 and have done two scans with MalwareBytes, but no malware has been found.  I also ran "SFC/scannow" and it found no problem either.  I checked to make sure that I put in the security key for the homegroup, and at this point, I am triple ideas.  It please does not restore to the factory settings, because I had this problem since the first day that I got this laptop out of the box before I did any customization. FWIW, I'm no novice in computer science.

  What suggest you?  TIA

  Yesterday I posted a note that I would have found and solved the problem.  I don't know what happened to this post.  The problem was that there was a popup that was actually a pop-under hidden behind a number of open windows.  He said that there was an invalid password.  Of course the note that I had used to set up 4 PCs had a "n" where there is now a "m".  I would like to say that this has changed from n to m somehow otherwise I don't know how I was able to put in place the other 4 PCs.  Anyhoo, the problem is now resolved.

• px12-350r unable to join the domain - what now?

  Hi all!

  I hope you can give me some advice because at the moment I'm in a really silly situation, being probably locked out of my Iomega px12-350r.

  Here is what happened:

  * The device was successfully linked to my domain name Microsoft AD and worked with this config at least a year.

  * I expanded the storage matrix, 2 days adding 2 drives. Everything went well and the end of the expansion, the new total disk space is displayed correctly in the web administration interface.

  * After this, I restarted the device. After the reboot, I couldn't connect to the device more using my domain account. This account had administrative rights on the NAS and I connected on the NAS using this account before.

  * I don't alter the domain infrastructure.

  * I know that the device cannot join the domain more because I enabled e-mail notifications and he continues to send me "unable to join the domain".

  I have already tried:

  * Connection using the usual accounts: doesn't seem to work once the device is connected to a domain.

  * Connection via SSH. Does not work, probably for the same reason as above.

  I wasn't yet:

  * The user manual mentions reset the admin password by pressing the reset on the back button. But this will only reset config (I'd be okay with it), or it will erase the data on the drives as well?

  I'm from the Germany. Despite having purchased a service plan 24 x 7 hotline support German will only redirect me to the hotline American which claim to do only office, no SIN px12. I'm kinda in the middle of nowhere now. ;-)

  Thanks for your help!

  Best regards

  Florian

  Hi André,.

  I fixed it without reboot - by chance.

  In a desperate attempt, I tried to connect using the domain administrator account - and it worked! I don't remember giving any px12 admin permissions to this user and I certainly don't connect to the device using this user before. But the account has permissions to create computer accounts in the ad, and in the moment when I logged in the computer account of the AD px12 updated password.

  I tell myself that the px12 has used the account admin for re - joining the domain. From the web interface, I could now do a sync AD and after that, all users of domain reworked.

  So, if anyone has the same problem, try connecting the device with any account that has administrative rights on the whole of the field, even if you have not used the account on the device before. It can work for you, too.

  Local accounts still do not work. I think that if the device is connected to a domain and the domain link is broken permanently, so it's only the reset button.

  Andrew Merci for your support!

  Best regards

  Florian

• Unable to connect the iphone to the printer

  I have implemented the software and can print wireless from office.  Unable to join the network of the iPhone after that I followed the instructions and enter the password.

  I learned that by adding my printer to my iPhone in accordance with the instructions, it will work correctly and is not be selected under settings wifi works properly every time. Printing from my iPhone works very well with my router selected and connected.  This point is therefore closed.

• Unable to connect to internet home with Blackberry 8900 for windows 7

  Unable to connect to internet home with Blackberry 8900 to windows 7, error = a network cable is not plugged in correctly or may be broken, tried a different cable, same problem?

  Hello

  1. are you able to use the Blackberry 8900 on any other computer?

  2 have had any changes made to the computer before the show?

  Please follow the steps in the link.

  Support for attached modem use

  http://btsc.webapps.blackberry.com/btsc/viewdocument.do;jsessionid=55C4DA5CE489E53E47CDDDB9FA0C6A59?externalId=KB05178&sliceId=2&cmd=displayKC&docType=kc&noCount=true&ViewedDocsListHelper=com.kanisa.apps.common.BaseViewedDocsListHelperImpl

  If you are still experiencing a problem, I suggest you to contact Blackberry support team for assistance.

  http://supportforums.BlackBerry.com/T5/community-corner/BD-p/corner

• How to join a network domain with the controller rt PharLab running?

  I have a PXI system that I would like to be able to access anywhere in the corporate network. Currently, I'm access via the IP address, but want to use the host name instead. Unfortunately, I couldn't find a way to join the network with the controller running PharLab area.

  Any suggestions in this regard would be welcome.

  Respect,

  Česlav

  Hello Bob and Česlav,

  I think Česlav was looking for / ask something different. (please tell me if I'm wrong)

  He really wants to do its PXI RT "look-uppable" via its corporate network without necessarily be on the same subnet (and use the IP address).

  In light of the additional information you (Česlav) provide that I would say again that you contact your IT Department first to see how they prefer it.

  They will generally the method of choice to do this. (both for desktop computers with respect to other devices)

  Sometimes it comes down to add to "add your host name and IP address to a list of DNS.

  The page that you link to is a specific way of Windows, adding yourself to a domain.

  Note that add you to a domain should provide you with the ability to use host names.

  However, he also did other things, which may not be possible or even allowed for other types of devices.

  In most companies you don't even have your desktop admin rights necessary to add your own pc (following this way) to the area, as it may cause a lot of security issues and risks.

  Because I don't really know what the establishment IT is by your side I can't really (with certainty) comment on what you should be able to do (and is not).

• peut vista premium on the same network home with an o/s of windows7 with a printer between pc Desktop 4, s

  I have 4 pc desktop 1 hp photosmart printer 3 PCs are windows vista premium 1pc is windows7 premium I can't seem to configure them together on the same network support;

  Hello

  Read these

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  setting up a network home

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  Vista File and Printer Sharing.

• Unable to join the homegroup - when you attempt to join I get this message: cannot create a homegroup on this computer

  I tried all the suggested 'fixes' and am still unable to join. My network has worked well until I installed W7. I can create a homegroup on any computer (I have 4 on the network), but no other computers can join. All I get when you are trying to reach is "impossible to create a homegroup on this computer". It is a problen very common, judging from all the complaints I've seen on the forums. With no exaggeration, there are thousands of people are unable to use this 'easy '... home network Please don't tell me to disable my firewall or computer time sync or one of the other "fixes" that do not help.

  Hello

  Since you're so desperate, you can configure the network to the office network.

  It's a little more work than the collective dwelling, but the results are more flexible.

  -----------------------------------------

  Here you have the whole story because what Win 7 can make wise network.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Homegroup = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Network of home or work = fundamentally similar (and better) to the previous methods of theWorking Group sharing which allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  Group residential-recommended-links - http://windows.microsoft.com/en-US/windows7/HomeGroup-recommended-links
  Homegroup - frequently asked questions - http://windows.microsoft.com/en-US/windows7/HomeGroup-frequently-asked-questions
  Why can't I create a homegroup? - http://windows.microsoft.com/en-US/windows7/Why-cant-I-create-a-homegroup

  Change-a-group home-password - http://windows.microsoft.com/en-us/windows7/Change-a-homegroup-password
  How to leave a homegroup - http://windows.microsoft.com/en-US/windows7/Leave-a-homegroup
  To turn on/off and set the IPv6 components - http://support.microsoft.com/kb/929852

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  ** Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Unable to join the domain "DNS name does not exist."

  Working on this computer remotely in my company, it has more a problem but at this moment, that we focus on trying to reach the area. We removed everything first to see if it would fix the trust relationship issues she felt the long side not being able to browse the files all computer network or servers.
  When trying to join the field, that's what we get in the dcdiag.txt in the debug folder.
  The domain name 'xxxxx' can be a NetBIOS domain name.  If this is the case, check that the domain name is properly registered with WINS.
  If you are certain that the name is not a NetBIOS domain name, then the following information can help you troubleshoot your DNS configuration.
  The following error occurred when DNS was questioned about the resource record (SRV) service location used to locate an Active Directory (AD DC) domain controller for the domain "xxxxx":
  The error was: "the DNS name does not exist."
  (0x0000232B RCODE_NAME_ERROR error code)
  The query was for the SRV record for _ldap._tcp.dc._msdcs.xxxxx
  Common causes of this error are:
  -The DNS SRV records to locate an AD DC for the domain are not registered in DNS. These records are automatically saved with a DNS server when an AD domain controller is added to a domain. They are updated by the AD DC at set intervals. This computer is configured to use DNS servers with the following IP addresses:
  198.6.1.5
  198.6.100.38
  -One or more of the following areas do not include delegation to its child zone:
  XXXXX
  . (the root zone)
  XXXXX = domain
  Also the listed IP addresses have been changed.
  
  
  I worked on this computer for about 2 days, and then the user is able to work remotely with a server terminal server, they will need access to the server later.

  Reset the network device - completely.  Uninstall the network driver and have someone there install the latest manufacturer.

  Manually enter the DNS information for the DNS servers of your company on the computer - even if it uses DHCP.

  Make sure that its time/time zone is the same as your DNS server.

  Reset all default HOSTS file.

  Ping the DNS server.

  When you join - use the FQDN (mycompany.local, etc..)

• Unable to join the domain on VM

  Hello - I just installed Workstation 12 on a machine and try to understand networking. We use the network configuration connection bridged, that seems to work for most. I give a static IP address to the virtual machine and am able to ping this IP from other computers, but I'm unable to join this virtual machine to the domain. All our DNS settings are configured correctly on the virtual computer. The error indicates it does not find our dns server when attempting to join the domain. What I'm missing here? Must the virtual machine use the host's IP as gateway or DNS? Shouldn't if we in bridged mode right?

  Thanks for any help!

  This has been resolved. I had to make the switch port that the host computer has been connected to a trunk instead of an access port port.

• Unable to join the domain using customization comments vCD

  I have vCloud Director installed and running.  I created a vApp and edited the properties to allow customization of comments and more everything works so far but the computer will not join the domain.  I tried to use organization customization, as well as customize the TIME after deployment.  As soon as the server ends with the customization and is powered, I can log in and join the domain manually without any problem, I can't get comments customization to do that for me.   Its a Windows 2008 R2 server.  I found this entry at the end of the journal to customize-comments on the server:

  run the command netsh interface ip set dns 12 xxx.xxx.xxx.xxx static (it has the correct address for my DNS server) =

  The command has been successfully run, the output of the command:

  The configured DNS server is incorrect or does not exist

  Any thoughts?

  It is a farily well known problem.  For a join of field works in vCloud Director, you must have on your DHCP subnet.  Many people make using the vShield edge device that is located on the network of the Org.  The sysprep process runs before tools VMware is running (which applies to the satic IP address to the client).  It's sort of a situation or hen that the guest has ip when in sysprep, so the easy solution to make it work is DHCP.  Conversely, people did it is in port, a lab post script custization in vCD Manager who entered the field after the sysprep is made completely and the guest it's static IP.  Frankly, it's something of the order of operations that is causing the problem.  We are looking at this for other clients, but at the moment, what your options are

  (1) add DHCP to the subnet by using your own server DHCP OR vShield Edge

  (2) add a PostScript of customization to join the domain, it can be inserted into the comments thus customizaion area.

  Hope this helps you stop banging their heads on the wall

• Satellite P100: XP Pro Media Center - unable to join the domain

  Recently bought a P100 with XP Pro OS but I'm not to be able to join the field to work correctly. Normally, to create a new account on the SBS 2003 server, then from the PC "join the domain.

  Clues?
  Peter

  Hello

  You should better check the Small Business Server site. You will find FAQS:
  http://www.smallbizserver.NET/

  Also check this:
  http://www.experts-exchange.com/Operating_Systems/SBS_Small_Business_Server/Hot_Solutions_1.html

• vMA unable to join the domain

  Hello

  
  

  I can't join the domain (windows-based).

  I want to join my vMA to the domain, but it is always the wrong password
  

  
  

  When I follow these steps on my vMA

  domainjoin-cli join < domain name > <-domain admin-user >

  
  

  He invites me authorization error so I tried with sudo

  
  

  VI-admin@VMA: sudo domainjoin-cli join < domain name > <-user-admin of the field: can I use to connect on my other computers >

  
  

  then he gives me a wrong password... my password is correct...

  I tried on two versions of vMA, 4.1 and 5.1/5.5
  

  any suggestions...
  

  Hey VirtualRay

  Your VMA has the same DNS settings in your area?

  So if you your vCenter Server ranging from ping vcenter01.mydomain.lan pings is returned correctly?

  If so, it should work

  1 from the vMA console, run the following command:

  sudo domainjoin-cli join

  2 when you are prompted, provide the password for the administrator of Active Directory.

  On successful authentication, the command adds vMA as a member of the domain. The command also adds entries in the file/etc/hosts with vmaHostname.domainname.

  3 restart vMA.

  Now you can add a target Active Directory at the VMAs. For the procedure to do this, see Add servers at VMAs targets.

  To check the settings of the domain of the vMA

  Since the vMA console, run the following command:

  sudo domainjoin-cli application

  The command displays the name of the domain for which vMA joined.

  :

• Unable to connect the iPhone to my work 6 to 2 (portable) via Bluetooth.

  Hello.

  I had the two work 15 "MacBook Pro (retina, early 2013) Mac OS X v10.10.5/Yosemite) and 64 bit W7 EE SP1 to a Thinkpad Lenovo W530 to pair with the iPhone to work 6 (iOS v9.3), but they do not connect. The iOS from iPhone Bluetooth said no "connected". I want to just copy my files between each image.

  Connection of Mac OS x before trying again to 64 bit W7. If I click on the name of his MacBook, it said "unsuccessful connection - make sure that 'computername' is active and within reach. Mac OS X says 'Not connected' to 'iPhone 6"working device. Double-click on "network is unavailable. Make sure that network access is enabled.

  W7 64 bit, I say its Bluetooth and find matching the iPhone detected 6. I see the iOS device. Yet once, "not connected".  HOWEVER, it says "Connection failed"ComputerName"is not supported." and forget this device. WHY?

  Why orders wireless is so difficult? USB cable was easy.

  Thank you in advance.

  This has never been a feature of the iPhone/ipad/ipod

  I'm sorry.

  Bluetooth is supported for hands-free phone features, speakers/headphones, some keyboards a few apps from the app store and the interest of home - if it is provided by the carrier.

  It doesn't connect to other phones, computers

• Unable to restore the iPhone!

  I'm trying to restore my old iphone 5s so I can use the storage just for recording videos. First, I tried to restore the iphone settings. When he asks my apple ID password, I enter and then nothing happens. The password box just gray go button and stays there and I end up having to close the settings window of the thing of multitasking. I turned the phone off and tried again, but the same problem occurred. I then plugged the phone in iTunes and tried it that way, but he asked me to turn off my phone function discovery. I went into the settings on the iphone and tried to turn it off when he asked my apple ID password once again. I went in and the same problem occurred. The password box and gray buttons and I returned had to close the window of parameters with multitasking. It's kind of scary, given all that I want to do is wipe the phone of its stored in the memory and I can't do it again!

  Nevermind, I found the solution on this cool site!

  http://SmallBusiness.Chron.com/reset-iPhone-password-protected-70214.html