Unable to open the program. I get this: lightroom.exe - application error: the application could not start corrrectly (0xc000007b). Click OK to close the application.

Lightroom.exe - application error: "the application could not start correctly (0xc000007b). Click OK to close the application. »

I use lightroom 5.

Please see the troubleshooting link: Solutions for Photoshop Lightroom 0Xc000007b error

Kind regards

Mohit

Tags: Photoshop Lightroom

Similar Questions

  • What should I do if I get this message: __Service: 'ESET HTTP Server' (EHttpSrv) could not be installed. Make sure you have sufficient privileges to install system services

    What should I do if I get this message:
    Service: 'ESET HTTP Server' (EHttpSrv) could not be installed. Make sure you have sufficient privileges to install system services

    http://www.eset.EU/support/FAQ

    Read the FAQ.

    See you soon.

    Mick Murphy - Microsoft partner

  • try to start the bonjour service, but get the error message: windows could not start the Bonjour service on local computer

    error message
    Windows could not start the Bonjour service on local computer
    Error 5 access is denied

    I have Vista Home.

    This prevents me to update I have tunes.

    Completely uninstall iTunes. Download the update manually from Apple or here. Restart the system and then install the software you have downloaded.

  • Error: "error btstackserver.exe: 0x0054be37 error, 0x000001ef memory could not be read" before the shutdown.

    Original title: Btstackserver causing error computer turns off.

    It began on 15 September after downloading a video game and starts when you try to run the game, but has since broke outside to play the game, even after I uninstalled it.

    The error message that appears before the judgment reads: "" btstackserver.exe error: 0x0054be37 error 0x000001ef memory could not be read. ""
    My laptop close instantly and is unable to start for a few minutes at least. Once a blue screen occurred on startup asking to allow the troubleshooting begin, that I authorized. There is however, no solution found by the computer. I tried several solutions, including running a system defrag and cleanup and uninstall the game. As part of my laptop gets unusually hot at shutdown, I also inspected the area and cleaned the dust of him in an attempt to eliminate possible physical obstructions.
    My laptop is an Asus N61jq age of two years and I run Windows 7 x 64.
    Any help is greatly appreciated.

    After you perform a clean boot several times, I determined the problem with the Steam client set. I also seek to their site of support for similar problems and followed through the steps of support described in this page: https://support.steampowered.com/kb_article.php?ref=1274-UOHK-5653

    For now, this seems to have fixed the problem, but I'll post here if the problem persists.
    Thank you very much for the help!
  • The application could not start correctly (0xc000007b) hearing CC last fix? Teacher of Win7

    A different user name, password,..., control given to the creative cloud, install hearing... then

    "The application could not start correctly (0xc000007b)" in the hearing of the CP. So re-installed. I offended want to spend hours trying to get Adobe software to run.  It's my download trial application to see how it worked. And he does not. And there are a lot of messages with advice complicated... ending by - go looking for someone to chat support. And they are not available. aaaaggggghhhhh

    I am now worried that installing any other application of dnuee may cause problems on my PC with Adobe's other SW.

    What is the newest way (and hopefully simple) to get this program to run?

    I have no ilivid,

    I: CS5, teacher of Win 7, installed through some Soft Adobe dnuee who told me to install and use to manage your CC account,.

    Grateful for all who can wand.

    Especially linked gave this soln:

    1. Please try to download a DLL https://drive.google.com/file/d/0B4eWI-NGpmnuTUxPQVIxYThSNlE/edit?usp=sharing

    2. the package contains the msvcr100.dll and msvcr80.dll files. Extract the contents of the package at the following location:

    ....

    I copied the 2 files DLL in the folder C:\program files\Adobe\audition cc 2014 and it worked. SIMPLE! YEH.

    Thank you

  • Whenever I try to open Outlook Express, I get this message: Run Time Error! Program: C\Program

    original title: cannot open outlook express

    I am running windows XP Professional

    Whenever I try to open outlook express, I get this message

    Run Time Error!  Program: C\Program...

    This application has requested the execution in an unusual way.

    Please contact the support team of applications for mor information

    I can not access my emails at all.

    Search for antivirus interference.  See www.oehelp.com/OETips.aspx#3

    If you can, open OE and click file | Identities and establish a new identity.  Then see if it works.  If you can not open OE to do this, then move all the dbx files to another directory of their current location.  To reset the message store, which you should be able to open OE then.

    Steve

  • I have error #1053 windows could not start the printer spooler. Help

    Windows could not start the printer spooler. I received the error #1053.
    whatever it is sent to the printer never finished loading and crashes to the top
    my computer, so I have to re - start.

    This forum is for posting comments on the web site of Microsoft Answers, is not for technical questions.  Ask your questions to http://answers.microsoft.com/en-us/windows/forum/hardware, making sure that you specify your Windows version in the drop-down lists at the top.

  • Hello, I was wondering why my adobe first pro ((when I try to open it)) say that "the application could not start correctly 0xc000007b" I need help as soon as POSSIBLE. Im trying to work on a film, but I can't until I have correct this problem. Help?

    Hello. I need help as soon as POSSIBLE, when click on my first adobe, it says "the application is unable to start correctly 0xc000007b" I need major help as soon as POSSIBLE - does anyone know how to solve this?

    ... 07 b problems http://forums.adobe.com/thread/1355374?tstart=0

  • "The application could not start correctly (0xC000007B)."

    Bear w / me... the beginning is a bit long...

    My old computer died a slow and painful death. I finally could not stand the constant crashes and recoveries, so I sprung for a new Win 7 box, triple-nasty, double-hang down. I got a legal copy of LR 3.3 on the old computer and a LOT of other things... I took out the old drive C: and installed in the new box. All my LR catalogs and pix was in the F: drive on the old box, but I have in vain by the way... this drive he caused the new BIOS or OS crash after POST (with a few strange video ramifications), so I had a guy copy such things in a folder on the C: drive. I will get a new drive and transfer at the latest.

    The new box is running Win 7 Home Premium 64 bit on a processor Core i7 - 2600 K 3.4 GHz quad-core. I think that the 64-bit version of LR 3.4 is a failure... but not sure?

    During the time that I'm futzing with computers, Adobe Releases 3,4.

    My problem is how to get LR 3.4 installed on my new box?

    I got my serial number (but never had enough away from using it). I tried to download 3.4 twice, using Chrome and IE. It seems to work. I install it... seems to work. I try to run it... get an error:

    "The application failed to start properly (0xC000007B)."

    I tried calling Adobe, but the call never crossed. I tried a dozen sites for more help, but all I found was something enigmatic on:

    "Go to the RESUMPTION of LICENSE CS5 folder then the folder of the DLL FILES and then copy the dll files 32/64/the two originals and paste and replace the in.

    the program Adobe directory. »

    Which is English? ;-)

    Another site suggested its replacement by amtlib.dll to amtlib64.dll, and then rename to be amtlib.dll. I looked for these files and only found one amtlib.dll associated with PSE9... none is related to LR3.4! Looked at on both the startup of new and old discs. NADA!

    I'd like a little help...

    TIA

    Title of the message was edited by: Brett N

    Chuxter has corrected the problem by reinstalling the OS.

  • Captivate 6 errors: Missing file libwinpthread - 1.dll and the Application could not start correctly (0xc000007b) under Windows 2008 R2

    Hello

    I have a problem with Captivate 6 installation on Windows Server 2008 R2. I have 2 different scenarios where I tested it, but the result is the same.

    1. I used AMEE (Application Manager Enterprise 3.1) to create the installation of the deployment via SCCM 2012 Package.

    Note that the current package works fine on Windows 7 (x 86 and x 64), but not on 2008 R2 error after I tried to launch the Captivate.exe application.

    The error indicates that there is a missing file: libwinpthread - 1.dll and if I copy and made a recording of the present. DLL file then he sends another error saying: on-demand failed to start correctly (0xc000007b) so he won't ever let me launch the application.

    2 now, if I install the package directly from the Original sources (CD) without creating any package AMEE after completing the installation, I have always the same error about the missing DLL file.

    Is there a fix or workaround to install 6 Captivate on Win2008 R2?

    Thanks in advance and greetings.

    This seems to be a generic question unrelated to Captivate. Here is a site that lists the possible causes.

    How to fix Libwinpthread - 1.dll is missing / not found error

    I don't know if their solution works well.

    Anthony

  • Error: The application could not start properly. 0xc000007b

    I use Windows 7 x 64 and whenever I run some programs installed, such as Celestia, Google Earth, and DOSbox, I get the message "the application could not start correctly (0xc000007b). Click OK to close the application. "I think that maybe it's because my x 64 system and these programs being x 86. I have attached a log of HijackThis here and a DxDiag here.

    As mentioned in several links in a Google search, this error is probably the result of a (x 86) 32-bit tries to load a DLL 64 bit (x 64) executable.  You may need to adjust your path or copy the dll to avoid this problem.  For example, my path is configured to search for the x 64 version of d3dcompiler_46.dll (for DX11.1).  I am lucky to have x 86 applications that need the x 86 version of this compiler (in fact, I have plans with configurations for Win32 (x 86) and x 64 MSVS).  The error dialog when I start the x 86 application.  In fact, the error if I try to run Intel (vtune) amplifier on a x 86 configuration.

  • Windows could not start the IKE and Authip IPsec keying service modules on the local computer. Error 1075 the dependency service does not exist or has been marked for deletion.

    Hi, I'm trying start the IKE and AUTHOP service from the SERVICES screen but I get this error:

    Windows could not start the IKE and Authip IPsec keying service modules on the local computer.  Error 1075 the dependency service does not exist or has been marked for deletion.

    original title: ike and authip error 1075 the dependency service does not exist or has been marked for deletion

    Hello

    Remember to make changes to the computer before the show?

    You can follow the below methods:

    Method 1: Restart Windows and try to start the Security Center service.

    If you still receive the same error, make sure that the WMI service is launched and running:

    (a) click Start, run , and then type Services.msc

    (b) double-click Windows Management Instrumentation

    (c) set its startup type to Automatic

    (d) click Start to start the service, and then click OK

    (e) restart Windows.

    Method 2: Restart the service

    Windows logs an error if the service IKE and AuthIP IPsec Keying Modules or the driver does not start, or suddenly, they end.

    To restart the IKE and AuthIP IPsec Keying Modules service:

    To perform this procedure, you must have membership in the local Administrators group, or must you have been delegated the appropriate authority.

    (a) restart the service. You can do this from a command prompt or in the snap-snap-in Services Microsoft Management Console (MMC). Do one of the following:

    ·         Start an administrative command prompt. Click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. At the command prompt, run the command net start ikeext.

    ·         Click Start, type services.msc in the Search box and press ENTER. In the column name of the Services snap-in, right-click on IKE and AuthIP IPsec Keying Modulesand then click Start.

    (b) if the attempt to restart the service fails, restart the computer. This forces all related and dependent services to restart.

    (c) if the error persists after restarting the computer, then the executable files for the driver or service may be damaged, and the operating system must be reinstalled.

    Note:

    You can check that the IKE and AuthIP IPsec Keying Modules (IKEEXT) service runs by using the Component Services Microsoft Management Console (MMC) or the net start command line tool.

    You can check the link: http://technet.microsoft.com/en-us/library/cc733299 (WS.10) .aspx

    Method 3: Run a scan of the System File Checker.

    http://support.Microsoft.com/kb/929833

    It will be useful.

  • Windows could not start the Base Filtering Engine service's local computer

    I get this error

    Windows could not start the Base Filtering Engine service's local computer
    Error5: Access denied

    When I try to start it but it won't start

    My computer is

    Windows 7 Home Premium

    64 bit

    Hello

    1. don't you make software changes before the show?
    2. do you have anti-virus outside Microsoft Product software?
     
    Follow method 3 in this article:
     

     
  • Windows Vista: windows could not start error. is suspended from the "Microsoft Corporation" loading bar then black screen BIOS not acpi compliant

    After you have installed the driver for the zune hd, I was asked to restart my computer. After the reboot, start froze on a white screen. I've seen this before and it is usually because of some connected usb components. so I manually powered down the Tower, disconnected the cable from zune and restarted. This time a screen saying that windows could not start, "launch Startup Repair tool" was recommended. Select this habit makes the startup hang to the progress bar from Microsoft corporation, then to a completely white screen. Although strangely, once only a blue error screen appears which says that the BIOS is not acpi compatible. I can't restart with F8 to go into safe mode, "windows error recovery" still appears. "Start windows normally"produces the same results as the tool to restart launch system. " I have a drive to upgrade to windows 7 and a windows XP upgrade disk. the disc of windows 7 hangs at "starting windows" and the XP disc gives a blue screen error: stop: 0x0000007B (0xF78D2524, 0c 0000034, 0 x 00000000, 0 x 00000000)

    I think I have a BIOS problem, but I don't know how I could continue dealing with the repair. I have no success update the bios from usb flash. Any idea is appreciated.
    Update: managed to start with F8, choose to boot in safe mode and loading hangs after "load: \windows\system32\drivers\crcdisk.sys"***.
    the machine is a gateway LX6810-01 (friend motherboard)

    Hello

    1. What is the exact error message when Windows Vista does not start?

    2. you have the disk Installation of Windows Vista operating system?

    I suggest you change the mode of RAMA to IDE in the BIOS. You can contact the PC manufacturer for assistance.

    Note: BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

     

    In addition, perform a check disk in Windows Recovery Mode.

    (a) Insert the Windows Vista installation disc in the disc drive, and then start the computer.

    (b) press a key when the message "Press any key to boot from CD or DVD".

    (c) select a language, an hour and the currencyand a keyboard or an input method, and then click Next.

    (d) click on check drive for errors.

    (e) in the System Recovery Options dialog box, select the drive of your Windows installation and click Next

    (f) to the System Recovery Options dialog box, click on check Drive for errors.

    (g) use the switch/r to run the disk check.

    Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

     

    It will be useful.

  • Please help, my other computer shows an error message: "Windows did not start because of an error in the software: load needed DLLs for kernel.

    Please help, my other computer shows an error message: "Windows did not start because of an error in the software: load needed DLLs for kernel.

    Hello

    ·          What is the number and the model of the computer?

    ·          What is the service pack installed?

    ·          The meadow of operating system has been installed on the computer?

    ·          Do you remember any changes made on the computer before the show?

    Try the steps listed in the link below: how to fix a computer that does not start: http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx

    You can also check: Error Message: Windows could not start because of the mistake in... : http://support.microsoft.com/kb/326671

Maybe you are looking for

  • removal of the toolbar

    I have a toolbar "A LOT" and I want to not go.

  • Phase shift USRP N210 WBX has not remained constant

    Hello Here's the anouced; After setting the RF front end, each local oscillator can have a random phase offset by separators in the VCO/PLL channels. This shift will remain constant after initialization of the device and will remain constant until th

  • WU repeatedly installs the same two updates. KB2686828 and KB2656839.

    I am repeatedly offered the same two updates that are installed automatically. When I try to install any other optional updates, they are downloaded but do not install. When I check the update history, there is no failure message or any indication th

  • Bengali fonts problem in Windows

    Hello I am from Bangladesh. Until recent years, we were quite used to do everything in the internet in English. But things have changed a lot now there are a lot of sites on the web in our own language. People really like read and write in Bengali in

  • Get still images from video

    I saved videos from my mobile to my computor. How can I create still frames from video to print photos?