Unable to open windows for a user... 'is not recognized as an executable program.

Similar Questions

• Unable to open windows

  I am unable to open windows on my pc. I installed vista professional, but not able to open the windows all of a sudden

  Hello

  a. you are unable to start your desktop?
  b. you get to the login page when you start the computer?
  c. did you do changes on the computer recently?

  You can try to boot into safe mode and see if you can boot to the desktop.

  Follow these steps:
  1 restart your computer if it is running.
  2. tap on the F8 key after your initially on powers computer.
  3. Once you see the menu Advanced Boot Options, you can stop tapping.
  4. use the up/down arrow keys to highlight your selection.
  5. select Safe Mode and press ENTER.
  6. you should see loading drivers.
  7. you should then be at the Welcome screen.
  8. connect to your computer using an account with administrator privileges.

  Start your computer in safe mode:
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Please give us more details so that we can help you solve the problem.

  You can see this help article:

  How to ask a question:
  http://support.Microsoft.com/kb/555375/en-us

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error when you try to set the Parental control 'Unable to set settings for administrators user or unknown users.

  I am trying to set up Parental controls for the user account of my son and I get the following error: error when you try to set the Parental control 'Unable to set settings for administrators user or unknown users.

  I tried to use the administrator account.

  When I ran the System File Check sfc/scannow

  TI completed indicating certain files may be damaged and cannot be repaired and check the convertible bonds. LOG file.

  How can I know which files are corrupted.

  Any other Suggestions on how to fix this user profile?  Do I have a profile that I don't know?

  Hi wimuggss,
   
  Step 1: Disable UAC (User Account Control) and check the result
  See How can I change the behavior of user account control by using the cursor?
  Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.
   
  Important: Enable UAC after you complete the steps.
   
  Step 2: If the problem persists, try to set the parental control in safe mode and check the result. If you are able to apply settings in safe mode, this means that some program is causing this problem, mainly the security software.
  See Start your computer in safe mode
  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Experaince Index Windows for my sytem could not be calculated.

  Mr President.
  Please delete my problem as indicated below:

  "Experaince Index Windows for my sytem could not be calculated. Could not measure the performance of storage. Error: unable to evaluate the drive.
  The parameter is incorrect. Let me know the solution to my problem explained above in the subject of this message. »

  Thanking you,

  Yours Sincerely,
  R.Thandapani

  Please delete my problem as indicated below:

  "Experaince Index Windows for my sytem could not be calculated. Could not measure the performance of storage. Error: unable to evaluate the drive.

  The parameter is incorrect. Let me know the solution to my problem explained above in the subject of this message. »

  Given the message is something in this sense:

  Index of Windows performance for your system cannot be calculated.
  Could not measure the performance of storage.
  Error: Cannot properly assess the disc.
  The parameter is incorrect.

  Do you use ReadyBoost (a USB drive connected to 'boost' performance)?  If so, unplug it.

  You have symbolic links to other locations on the system?  Check your TMP and TEMP environment variables to point to the REAL locations - not through any symbolic link.

  Make sure that the space is sufficient on the drive in question, as well.

  At the end of the day - I suggest you skip this "assessment" of your system and not run again.  ;-)

• I bought Adobe Acrobat DC. We use it in a desktop environment. Is there a way to "TURN OFF" the concept of cloud for another user does not see a confidential pdf in their queue?

  Is there a way to "TURN OFF" the concept of cloud for another user does not see a confidential pdf in their queue?

  I tried to contact technical support to the 800-833-6687 but was put through several automatic guests and disconnected.

  Hi plumasca,

  Refer to this topic for help disable features/services online in Acrobat/Reader DC?

  Kind regards
  Nicos

• Discover Setup RSA for Internet users is NOT only internal users

  Discover Setup RSA for Internet users is NOT only internal users

  Yes, that might work very well.   No, the software of RSA information would not be repeated between brokers.

• Unable to open file vista business user, after updating to windows 7 pro, any suggestions?

  After upgrading to Windows 7 Pro, I'm not able to open the user folder in old.windows. I can open the folder of the file and windows program (they are also in black text whereas the text for users is blue).

  http://TechNet.Microsoft.com/en-us/library/cc753659.aspx

• Unable to open Windows Update, 0x8024400A error 0 x 80240036

  Original title: I can't open Windows Update. I get the following error messages-0x8024400A and 0 x 80240036. Can anyone help please. I recently rebooted my Win XP Op Sys. It was working ok before. Thank you
  I can't open Windows Update on my desktop pc. I get the following error messages-0x8024400A and 0 x 80240036. Can anyone help please. I recently had to reload my OS (Win XP), it was working ok before recharging. Thank you.

  Hello

  1 update you are trying to install?
  2. don't you make changes on the computer before the show?
  Method 1:
  The problem with Microsoft Windows Update is not working: http://support.microsoft.com/mats/windows_update/

  Method 2:
  You can also try the steps in the link and check.
  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or
  http://support.Microsoft.com/kb/943144

  Method 3:
  If the problem is not solve I suggest you try the procedure described in the link mentioned below.
  
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  WARNING: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows

  322756 (http://support.microsoft.com/kb/322756/)

  Follow the article below to learn more:
  Temporary connection related errors may occur when you use Windows Update or Microsoft Update
  http://support.Microsoft.com/kb/836941#advmethodC

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• Opening windows mail requires user name and password every time?

  Windows Mail requires user name and password every time that we open ourselves to it.  All the settings are correct.  What can we do to solve this problem :)   Thanks in advance.

  Windows Mail requires user name and password every time that we open ourselves to it.  All the settings are correct.  What can we do to solve this problem :)   Thanks in advance.

  1. temporarily disable your antivirus software. See if the problem stops.
  2. your account could be damaged. Delete the account. Re-set up your account.

  t-4-2

• Unable to open Windows media player and window media center

  Title: window media player and window media of origin Center cant function.

  I have buy new laptop asus A42J with windows original last year... the 1st time my window media player n media center window works exactly... since I never open it for a long time... it can not open it now... When I try to open the media player, nothing happens and when I try to open Media Center it say Center of media has stop working... anyone know how to fix this?

  You can download the latest version of media player here and try if it works...

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Media-Player-12

  or

  You can try this procedure to restore your windows media player.

  (1) Perform SFC first. Follow the link on how to make SFC (http://support.microsoft.com/kb/929833)

  (2) turn on / off Windows Media Player again.

  a. go to start and in the search type 'Turn Windows has or not'.

  b. click on the "Turn Windows features on or off".

  c. check the "media features.

  d. restart the computer.

  You can also try restore (http://windows.microsoft.com/en-us/windows7/products/features/system-restore) your computer to the final point where windows media player worked.

  Or you can use the previous versions of windows media player that comes from restore points or windows backup.

  Or you can try to run 'Fixit '.

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

• Unable to open Windows media player error Server execution failed

  Original title: my windows media player does not open

  I have windows 7 and recently everytime I open my Media Player, that it opens at all and if I select a file to play with media player, it says "Server execution failed" and it never occurred before. Help, please! I'm dying without my music

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  ·         What happens when try to open Windows media player?

  I suggest you follow the steps mentioned below:

  Method 1:

  Open Windows media player troubleshooting setting and check if the problem continues, follow them steps described in the following link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2:

  If the previous step fails execution of corner store to library Windows media player and check if the problem persists, follow the steps described in the following link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

  Method 3:

  If the previous step fails, run the System File Checker tool to troubleshoot missing or corrupted system files follow the steps in the following article below to run the System File Checker:

  http://support.Microsoft.com/kb/929833

  You can alsoUN fix from the following link and check if the problem persists:

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

  Method 4:

  If the previous step fails to follow these step and check if the problem persists:

  a. Click Start and in the search bar type cmd.exe

  b. right-click on cmd.exe and click Run as administrator

  (c) in the command prompt, type the following command:

  net localgroup "Administrators'"NT Authority\Local Service"/ Add

  d. press on enter, and then restart the computer and check if the problem persists.

• I just replaced my cd/dvd drive with a new TEAC one. I have Vista (32-bit) but iTunes Windows Media players, it is not recognized as a burner and won't read blank media. I need help!

  TEAC DV - 28 S - W model number

  Hello

  Try these steps and see if it helps.

  Step 1: Run the provided article fixit.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Step 2: Run the troubleshooter of CD/DVD burning.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-and-burning-CDs-DVDs-and-BluRay-discs-Troubleshooter

  For ITunes:

  http://support.Apple.com/kb/ts1436

  See also:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

• Wired controller Xbox 360 connects to Windows 7, error: USB device not recognized

  Original title:-wired controller Xbox 360 connects to Windows 7

  Hey, I recently bought a controller wired xbox 360. And it does not connect to my PC. When I try to connect it says device not recognized USB. And in Device Manager it says it is an unknown device and that "Windows has stopped this device because it has reported problems. (Code 43) "I downloaded the driver from the software http://www.microsoft.com/hardware/en-us/downloads here and I also downloaded the MotioninJoy as an emulator, but the xbox 360 controller does not always connect." Is there a way to fix this?

  Hello

  1. did you of recent changes to the system before the show?

  2. do you have the receiver for the device to the XBOX?

  Method 1: Troubleshoot your XBOX controller.

  Follow the steps in troubleshooting from the link below and check if it helps.

  http://support.Microsoft.com/kb/908888

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  http://support.Xbox.com/en-us/Xbox-360/troubleshoot/accessories/controllers-remotes

  Method 2:

  (a) click Start.

  (b) access Control Panel, click on System.

  (c) click on hardware, click Device Manager.

  (d) open Device Manager and expand the devices with error code 43.

  (e) right click on the device and Uninstall the device.

  (f) restart the computer.

  Check to see if that fixes the problem.

  If the problem persists, I suggest that you follow the XBOX support link below for assistance.

  http://support.Xbox.com/en-us/

  In addition, check out the link below and check if it helps.

  http://support.Xbox.com/en-us/Xbox-360/troubleshoot/hardware/error-codes

  It will be useful.

• Failure of Windows 8 install, now the Windows 7 product key is not recognized, because it was an upgrade only.

  After several attempts of downloaded installation windows 8, I ended up with a useless and made desktop resettlement using my windows disc 7. Now, the product key for my windows 7 is recognized as a key to upgrade only and does not have to satisfy to MPA.  Where is my satisfaction? I have 30 days to resolve. Either I need a key for my 7, or a facility for my 8. Everything on my end, that I could find online tried. I think this is a Microsoft problem and the solution must come from them.

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Tablet user name not recognized on laptop

  Windows 8 tablet is recognized in the control panel network, on Vista laptop, but the connection cannot be established because the username tablet is not recognized

  Pseudo tablet System Info object is in the format COLINACER\ColinAcer\Colin

  Cannot transfer / synchronization of files accordingly

  Any help much appreciated

  concerning

  Colin

  Hi Colin,

  To help you with the problem please answer the following questions:

  1. What is the error that you receive when try to access Windows 8 from Vista?
  2. is your vista computer recognized in Windows 8?

  While you answer us with more information, see this step.

  Click the windows 8 computer listed under network in Windows Vista.
  
  If you use a local account, see this step:
  In the name box, type user
  ColinAcer\Colin
  Type the password in the password box

  You can also try the command and control below if you have access to Windows 8.

  Click Start, run, type "-name%\c$" to access the c: on the other PC. "Alternatively, \".
  
  If you use a Microsoft account, see this step:
  In the user name box, type your user name for the Microsoft account.
  Type the password in the password box
  Now check if it helps.

  Also refer to this link: sharing of files and printers

  http://Windows.Microsoft.com/en-in/Windows/sharing-files-printers-help#sharing-files-and-printers=Windows-8&V1H=win8tab6&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps.