Unable to print error message...... "The RPC server is unavailable."

Similar Questions

• While trying to install a printer driver I got the message "the RPC server is unavailable."

  I'm on Windows 2003 and XP Professional

  Here's what Microsoft has to say about your question:

  http://support.Microsoft.com/kb/884564

  Here is someone who had the same problem you did.

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• error code 1722: the RPC server is unavailable. (I can't print documents)

  Hello

  I can't print my documents, I have message from UN code error 1722 the RPC server is unavailable
  I started solving the problems on my printer, Windows did not find problem.
  I bought a software to repair Windows (Regenie), I was able to print during the morning, and the afternoon impossible.
  I restarted the Regenie software, I restarted my PC, and always impossible to print documents, with the same error error code 1722 the RPC server is unavailable
  I don't know what to do, thanks for your help
  Thanks for your replies
  Good to you

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  Left click at the bottom of the Microsoft Community page

  English and set your language.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• My computer has been recognizing not my two printers. He says that the printer spooler was not working. So I uninstalled my printer and when I tried to reinstall I received a message that the RPC server is unavailable.

  My computer has been recognizing not my two printers (which I have had for years).  The message says that the "spools of printer was not working" when I tried to print.  So I uninstalled my two printers and tried to re - install.
  Then I get a message that the "the RPC server is unavailable".

  Hello Sue Strong,.

  Thank you for your message.  Let's try the following:
  Click 'Start' > right click on 'My computer' > select 'manage '.

  Click the (+) sign next to "Services and Applications" > select 'Services '.

  On the right, find and right-click "RPC Remote Procedure Call ()" > select "Properties".

  Select the "Recovery" tab, then successively in first failure, second failure, etc. "restart the Service"

  Validate the change OK
  Stay in the services menu.
  On the right, find and click on "Print Spooler" > select "Properties".
  Click on the 'Start' button and check the "Startup type" is set to "Automatic" and click OK.
  If these steps resolve the problem, click HERE for more information and troubleshooting techniques.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Error "the RPC server is unavailable."

  I have a Windows XP Home SP3 PC who, since yesterday has been report error "the RPC server is unavailable" in attempting to perform specific tasks such as remove programs via the control panel and of the files of backup using Acronis 10. 'Paste' files which have been 'copying' ed by right click of the mouse or drag-and - drop, and finally, Internet Explorer 8 does not load authorize also Windows Explorer is no longer. I suspect that all these problems, which began at the same time, are connected!

  I did a virus check full system using AVG 8.5 and booted in safe mode "...". from last known working configuration"but nothing works.

  Any thoughts?

  I'll make sure that your Remote Procedure Call (RPC) server is running.  Right-click on my computer-> Manage and go to the services section.  You start and stop the services from here.  You can also right-click and select Properties... and see the service dependencies.

• When I try to renew my IP address I get the error: the rpc server is unavailable.

  I'm not getting Ip Add. in my laptop. When I try to renew the ip with IPCONFIG/renew it gives error the rpc server is unavailable. If I try to start this service in services.msc, that she does not get any changes.

  Thank you & best regards

  Aniket

  I would like to check the status of the Services.

  Click on the Start button and select Control Panel, administrative tools, Services. Locate the RPC end point Mapper in the list and make sure that the startup type is automatic. If it is not set to automatic, right-click and select Properties, general tab. There is a box after the startup type. The options are available in a menu drop-down by clicking on the down arrow to the right of the box. Make the change and click apply and then click OK. Restart the computer and verify if it has started.

  Hope this helps, Gerry Cornell

• My XP PC clock does not have to be updated; error report is: "the RPC server is unavailable."

  Hi there u clvr g33ks. Wu can help me slve ths prblm? My XP PC clock does not have to be updated; error report is: "the RPC server is unavailable"? I have tried pretty much everything hv what is allocated to me.

  Hello

  You can view these steps

  a. Click Start, type CMD. EXE and press ENTER.
  b. run the following commands one by one. (Press ENTER after typing each command.)

  NET STOP W32TIME

  W32tm /Register

  NET START W32TIME

• Content file download failed. Reason: The RPC server is unavailable.

  Hello

  Please help, I have the following error with my WSUS. The clocks are so successful.

  According to the survey, it is said "updated the files needed: 2589 ' 'downloaded 0.0 MB of 30 years, MB 196,09.

  MT event logs show ID 364

  Content file download failed. Reason: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA) Source file: /msdownload/update/v3-19990518/cabpool/windowsdesktopsearch-kb926356-v2-x86-nld_72b01991a8ebadf72d2512e19234943920ee4104.exe Destination file: c:\WSUS\WsusContent\04\72B01991A8EBADF72D2512E19234943920EE4104.exe

  I opened the firewall to allow full access to the net to the WSUS server, so it does not use a proxy.

  Please for any assistance you can offer.

  Did you run the Bits? Rob - bicycle - Mark Twain said it is good.

• Application of automatic certificate for local system failed (0x800706ba) the RPC server is unavailable.

  I get these errors on some Windows 7 machine "registration of automatic certificate for local system failed (0x800706ba) the RPC server is unavailable" ID of the 6 event and event ID 13

  "Registration certificate for Local system failed to enroll for a certificate of computer with application ID N/A dc.contoso.com\contoso-DC-CA (the RPC server is unavailable." 0X800706BA (WIN32: 1722)). »

  other windows XP, Windows 8 and windows machine 7 receive the certificate through auto-enrollment.

  Hi Sam,

  Thanks for posting your query in the Microsoft Community Forums.

  Because the issue is limited to with RPC server, it is better suited for the IT Pro TechNet public. Please ask your question in the Forum on TechNet Support. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro/
  I hope it helps. If you have problems in the future, please let us know. We will be happy to help you.

• After the removal of a virus, I can't connect to the internet, is looking for an IP address, and the RPC server is unavailable, said

  My netbook has a virus so I did a scan and remove infected files and a program which the virus attached itself to.  Now, I can not connect to the internet.  He is looking for an IP address, and he also says that the RPC server is unavailable.  Any ideas?  Help

  Hello

  Step 1: Start your computer in safe mode, and then try to start the Remote Procedure Call (RPC) services and start the computer in a clean boot
  a. Click Start, type services.msc and press to enter.
  b. in the list of services, double-click Remote Procedure Call services.
  c. change the startup type to automatic, and then click Start.
  d. click ok to apply the changes.

  Reference: http://windows.microsoft.com/en-US/windows7/what-is-safe-mode

• I get an error message that says that the RPC server is unavailable when itry and open something

  I can't open my computer, Control Panel, my documents and devices everythings drivers comes with the rpc server is unavailalbe

  Hello

  1. have you made changes on the computer before this problem?

  2. what operating system is installed on the computer?

  The RPC server or remote procedure call is a service on your computer that allows other computers to access remotely.

  Method 1: You can check the event viewer for detailed information on the problem. Consult the following links.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Method 2: The Remote Procedure Call (RPC) Services service must be started and startup type must be set to automatic.

  (a) click Start, type services in the start search box and press enter.

  (b) in the Services window, find a remote procedure call and do a right click on it to select Properties.

  (c) under the general tab, make sure the Startup type is Automatic and the Service status indicates Started.

  Method 3: If the methods above help not, perform a restore of the system in safe mode.  You can restore the computer to a date when the computer was working properly.

  a. click Start, type System Restore in the search box and then in the list click on the system restore program.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  b. in the System Restore dialog box, click choose a different restore pointand then click Next.

  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  d. click Finish.

  Reference: System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  See also: http://support.microsoft.com/kb/555839
  This article does not apply to Windows 7, however, you can see the steps.

  Let us know if it helps!

• Unable to connect win7 starter to xp printer error message: "not enough server storage is available to process this command."

  When I tried to connect my Win7 starter Netbook on my HP C5280 printer shared in my XP Pro SP3 desktop computer, this error message until I install the appropriate driver

  PS:
  1 - Win7 allows me to choose the printer in XP to connect to.
  2 - I tried to create or increase the value of "IRPStarckSize" in the registry, in computers
   
  Thank you for your help

  Hello

  Thank you for your quick response.
  I solved the problem as follows:
  1 correct the evil of "IRPStackSize": instead, I wrote IRPStarckSize! " in the registry
  2. create / change the value of ""IRPStackSize ' to '25' in XP and Win7 Starter registry "
  4 - restart both computers.
  5 -Add a printer in Win7 starter, using 'Add a printer pop-up menu'
  6 - Select "create a new port. Select "Local Port" as the port type.
  7. in the "Enter a port name" box, type the address in the following format:
       \\ my XP Pro SP3 utilisateur\Mes shared the name of the HP C5280 printer 
  8 - click Next
  9 - Choose the appropriate driver in the list of drivers.
  If no driver available, click the Windows Update button, wait for the process finishes and then look for the
  driver again.
  10. complete the installation by printing a test page.
  Hope this will help other members of the Microsoft Community.
  PS installed anti software virus in my computer have no impact in my case.

• HP Laserjet 1010: Unable to print. error message "unsupported personality: PCL.

  Hello!

  I had my old HP Laserjet 1010 installed on my HP ProBook 650 G1 sucessfully. Yesterday interrupted with an error message like "personality unsupported PCL"

  Can help you...

  Concerning

  Raimo

  Raimo1 wrote:

  Hello!

  I had my old HP Laserjet 1010 installed on my HP ProBook 650 G1 sucessfully. Yesterday interrupted with an error message like "personality unsupported PCL"

  Can help you...

  Concerning

  Raimo

  Hello

  http://h30434.www3.HP.com/T5/LaserJet-printing/unsupported-personality-PCL-on-LaserJet-1012-printing-from/TD-p/470237

  HP will not develop a Windows 10 driver for this printer. The best option is to buy a new printer or get a laptop computer with the operating system prior to Windows 7 because this error occurred on Windows 7 computers due to inadequate software support driver for the printer. Perhaps a simple shooting turn also works as described in the link.

• Unable to print, error message local print spooler service does not spoller restart or reboot machine.

  whenever I hit print, an error message appears "before you can preform task printer for example page put in place or to print a document, you need to install a printer now?" when well even I had an OKI c110 installed. so I tried to reinstall it. I clicked 'YES' then the error message says "windows can't open add printer." the local print spooler service isn't runniong. Please restart the spooler or restart the machine.  I did all the above but only can get it to start.  Please help me, I depend on my printer.

  You can also run the troubleshooting of the printer.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems:

  http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer difficulty of:

  http://support.Microsoft.com/GP/printing_problems?EntryPoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

• Unable to print error message

  Samsung galaxy s3
  HP printing service plugin used to work
  4.3 Android
  HP officejet 6500 has more Wi - Fi printer

  Your printer 'E-all-in-one printer Officejet 6500 a series (E710)' is supported to work with the printing solution for Android. You know of course that it worked before. Make sure that your phone is on the same network as your printer wireless. The Galaxy S3 can connect to 5.0 GHZ networks, and your printer cannot.  What App are you printing from? He sees the printer?

  Test your printer to make sure that it is not in an error of its own State. From the front of the printer, perform a color copy, it will check that the printer is functional.

  You can watch in this document to see if there is any other information that might help: Android 4.3 (Jelly Bean) and earlier versions: printing with printing from Android Solution

  Here is some additional information on a similar question: Galaxy S4, HP 8600, error: cannot use this print option

  Let me know.