Unable to print - Officejet J5780 all-in-One, connected to the laptop USB

Similar Questions

• HP Officejet J5780 all-in-One printing backwards!

  Hello!

  I have a HP Officejet J5780 all-in-one and had no problems at all since I bought it 15 or 16 months ago.

  However, a strange thing is happening out of the blue - today, everything that I try to print print back - very odd!

  Clues as to what this may be? Maybe a virus?

  I checked all the print settings and they are as they are normally.

  Any help you can lend is appreciated, I should use the printer this weekend!

  Thank you!

  woo2u2

  This problem may occur if you installed Windows XP SP3 recently. If you go to one of the tabs under printing options, you will have an option named "Mirror Printing" or "Mirror Image". try turning it off. I think it's under the "Advanced" tab

• Do I have to pay to download the driver for my printer Dell 966 all in one I lost the driver CD?

  Original title: Dell Printer 966 all in one

  Do I have to pay to download the driver for my printer Dell 966 all in one I lost the driver CD?

  Sam Soliman
  E-mail address is removed from the privacy *.

  You shouldn't if you get it from Dell.

• Officejet 6310 all-in-One fainted during the printing and copying

  I have an Officejet 6310 all-in-one.  I have Windows Vista.  Yesterday, I replaced the black cartridge with HP98.  Now when I make copies or print a document, print the page gets more light and more light, about 1/3 to 1/2 through the page and very light down by a horizontal white line through the text.  I cleaned the cartridge with a damp cloth, I ran the command of cartridges clean but also align the cartridges.  I turned off the printer and unplugged and restarted again.  When I run a self-test page, especially the black line went up to 2/3 of the way, then it is empty at the top and gets darker, then the last 1/3 is fine.  The test pattern shows a few holes in the grid to black.

  I just checked the cushion under the black ink cartridge and it is saturated with ink.  I don't know that is where the problem originated.  I would be very grateful of any advice to solve this problem.

  Thank you.

  Is it a HP cartridge or a charging/reman?  It seems to be a faulty cartridge.  If it is an original HP, then check the warranty of the cartridge as shown here.

  It is unlikely that the ink that you see in the field of the service station is the issue.  The ink that you see is the result of the normal maintenance routine that the printer uses to keep the printheads from clogging.  It is normal that there is ink in this area.

• Logo on Quickbooks & PayPal does not print OfficeJet 7210 All in One

  Spin Windows 8 (64-bit). My logo on invoices from Quickbooks & delivery notes and mine and logos of PayPal on the PayPal online forms do not appear on the output of my HP OfficeJet 7210 All In One, BUT they do when printed on other printers I've tested using the same documents. I downloaded what I believe to be the printer driver on the HP support site, but the problem persists. Need some suggestions, please.

  Hello joefredt.

  Thanks for the information. I want you to add a printer Deskjet 990c. Please open "devices and printers". Once that opens click on add a printer in the dialog box. Now click on "add a local printer. When it says "use an existing port", the drop-down box and search for the USB0001. Select it and click "next".  Please click the button of "Windows Update". This may take a few minutes to complete. Just wait for the "MFG" and "Printers" list to fill again. When they come back to the top, scroll down to "HP" (no), and then search for printer "HP Deskjet 990c" on the right side. Please select this option and click Next. After that simply select the Finish button. Once the printer is installed you can your print jobs that you have problems with the printer. I hope this helps.

• HP Officejet J5780 all-in-one will print test and diagnostics pages but nothing else

  I tried to install my Officejet J5780 on a Windows 7 machine and install CD does not work for Windows 7.  Downloaded the software and drivers from the HP site and since then the printer prints a test page or a page of diagnosis etc but nothing of MS Office or Notepad.

  Any ideas?

  Hello

  I see that you have a problem with the printer. I would say that runs the print and scan the doctor.

• Unable to print my F4580 all-in-one of my MacBook with OS x via USB

  Hi Forum,

  I have a HP F4580 all-in-one printer/scanner that worked fine on my old laptop with windows vista.

  The laptop is dead now so I thought I would try Apple.

  Now I need to print some stuff for work, but it does not produce anything.

  It is connected via usb and has been implemented on the Mac through the Preferences system and printer & Scanners icon, but when you click on print the document that you want the small printer icon on the dock at the bottom, but the printer does not ever print anything!

  Anyone know what I could do wrong or if it unifies works through OSX.

  Help, please.

  Much Willow1980 thanks

  No problem!

  I would recommend to fix permissions of the drive on your computer by following this document Apple here. Once this operation is complete, make sure that your Apple updates are done by following this document Apple here.

  Now, I would reset the print on your computer system. Please follow this document Apple here. If your USB connection does not correctly, follow this document Apple to USB: Troubleshooting Error Messages. I will seek forward to hearing from you again!

• HP Officejet J5780 All in one will not scan

  My HP Officejet 5780 all-in can't scan it copy, fax, print, but has an error on scanning then someone please help me.

  Hello

  1. What is the accurate and complete error message you get?
  2. do you and changes to the computer before the show?

  If you are using HP software to scan, I suggest you try the steps from the following link:

  I can't scan in Windows using the HP software
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02661093&LC=en&DLC=en&cc=us&product=3301296#n56

• two black lines on HP Officejet J5780 all-in-one

  When you print from the ADF of my officejet J5780, two parallel straight lines appear on the right side of the top of the page toward the bottom of the page.  Anyone know of a solution? My research, such as it was, came the voids.

  Since you get only that when you use the ADF and not when using the scanner glass, it tells me it is specific to the region I was explaining.  Please take a closer look, it is possible that something is under glass in this small strip.  Even a small speck of dust, in the analysis of this region will create an output of a line to the bottom of the full page.  If you hold the printed page with the line where the ADF would feed through the scanner glass, you should see where is the problem area.

  Thank you

• HP OfficeJet J5780 all-in-One not Scan under Vista 64-bit

  I have brand new HP Pavillion Dual Core processor and 6 concerts computer memory, so I know that my computer is OK.

  I have a computer set up to Dual Boot Windows Vista Home Premium 64 Bit & Ubuntu Linux.

  Under Linux, the printer will print & scan (both)

  In Vista, it prints only

  My wife has Windows XP on his computer & it prints & Scans

  We come to the rear USB cable & before printing on computers.

  I have downloaded the latest drivers & critical updates & installed Vista without result.

  It will not even scan directly from the printer.

  On the printer, it says:

  No scan option, don't refer to the device Documentation. ???

   

  I know the printer is about 2 to 3 years, but it still works except scan!

   

  Please help, thanks in advance

  It is fixed after reading the HP Help Pages

  To scan in Vista... You MUST do it in paint or Windows Photo Gallery.

  Hope this helps someone

• USB printer on a Vista wireless network connects to the laptop Vista.

  The printer is a Kodak AiO ESP 3, connected via USB to a desktop Vista Home built.  Second office is a homebuilt XP, which has no printing the printer problem.  It detects automatically.  Laptop is a Toshiba L305D-S5928, also running Vista Premium family, installed at the factory.  Laptop computer "sees" the printer installed on the desktop when it tries to connect, I get a message that says: it cannot connect to it.  It is as it tries to connect to it as if the printer is a wireless printer, and this isn't.

  Make sure that the printer is Vista Compatible and you have installed the latest Kodak printer drivers for the Vista machine.

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  Have a read of the link above re Vista file and printer sharing.

  See you soon. Mick Murphy - Microsoft partner

• RE: Software Center of Solution of my printer to an HP Officejet J5780 All in One

  I can't find the Software Solution Center of my printer on my computer. I was rentalling I tried the software using the CD, but it didn't work. Can you please help me. My OS is Windows Vista Home Premium Service Pack 2.

  Hello

  Please use the link below to download the full featured software for your printer.

  Printing software

  Kind regards
  Jabzi
  
  Help the community by marking this post.
  Your question has been answered? Mark it as accepted Solution !
  See a great post? Give a Kudos!
  I work for HP

• HP Officejet J5780 all-in-One that wont print more.

  The problem is that it does not recognize when the paper is available; It is said we no paper in it even if there is a large stack of paper there.  What can I do to make it work again?

  Hello

  1 have had any changes made on the computer before the show?

  2 Windows operating system you are using?

  3. What is the full and exact error message?

  See the article and check if that helps:

  "Out of paper" Error Message is displayed and the product does not look upward or feeding the paper

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&DLC=en&docName=c00786157&LC=en&product=3301296

  Let us know if it helps.

• Devicehp officejet j5780 all-in-one

  When I try to print and I have a lot of paper inside it myself without paper also argues that the color cartridge is good thanks it would be really useful

  It is a problem with printer HP, not a Windows problem.

  Start here--> http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&cc=us&dlc=en&lang=en&lc=en&product=3301296

  If you still have problems, post back with the full text of all error messages and the results you have performed the steps in troubleshooting.

  --> http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00833064&tmp_task=solveCategory&cc=us&dlc=en&lang=en&lc=en&product=3301296 ink cartridge error
  Although authentic HP ink cartridges are expensive, even they sometimes are not recognized correctly.  If cleanup operations proposed by HP do not help, you may need to try a new cartridge.  If you're lucky, this will work AND you bought one a place that will exchange (e.g., Costco).

  "paper on ' error--> http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00786157&tmp_task=solveCategory&cc=us&dlc=en&lang=en&lc=en&product=3301296

• Unable to Scan officeJet 5510 All in One

  XP

  I have had this machine, no CD, downloaded the soft/driver, it was perfect

  I have IE6.0 on IE8 updted. After this, HP 5510 not worked, any program not lunch

  Uninstalled the driver HP and reinstall

  Many message error and my computer freez. I tried to do also with hungari and English language

  No good result

  ScanDoctor found a lot of error

  Uninstalled all programs, Setup a new WIN XP

  No good result.

  HP average setup freezes time, or at the end of the time, not lunch HpDirector etc etc

  Finally, I can print and copy, but I can't scan

  Here are a few pictures of errors

  http://horex.UW.Hu/kepek/hp_device_detected.jpg

  http://horex.UW.Hu/kepek/hp_error2.jpg

  http://horex.UW.Hu/kepek/hp_error3.jpg

  http://horex.UW.Hu/kepek/hp_doctor.jpg

  http://horex.UW.Hu/kepek/hp_mistake.jpg

  I'll open my window and...

  Hope I get good advice

  Solved!

  I did a full new install of WIN XP because soft HP would install to the C: drive. I didn't want it and soft HP did not offer to choose disk and installation full or reduced. Of course not because uninstall left every details earlier in the registry

  New configuration froze again at the recognation of USB device

  I didn't know why, but I thought that he has fought for another program runing

  I turned off the firewall and internet connection

  My computer is restart and automatically continue Setup without any problem on disk D:\

  What is the solution?

  p.s. I used Wise Registry Cleaner mind deep cleaning to kill all HP registry detail