Unable to properly use the tumblr dashboard?
Up to wake up this morning, I was able to use fully the tumblr and the dashboard correctly. Unfortunately this is no longer the case. When I go on tumblr, I encounter a plethora of problems that make using it almost impossible. On the dashboard and the pages with it enabled, infinite scroll no longer works. None of the options send or the ability to republish the load once clicked, he throws just up the transparent blue without the tool. I can not get the drop for tracking tags to appear. I can't change even what a blog myself I consult.
So far, I have tried the following: Safe Mode - I have not encountered any problem in mode without failure.
Firefox reset - I thought that if I removed all the extensions and the things he could solve this problem, unfortunately, it does not.
Disable the extensions one - did with them all, without change.
Using another browser - everything works fine in Chrome, but I refuse to use because I view pages using advanced fonts and Chrome does not support them.
I contacted [email protected], but received no response, and above all, it seems to be a question on the browser side.
Firefox Safe mode makes a few other changes in addition to disable the extensions. It is of disabling the use of Firefox hardware acceleration (already not used on your system based on your system more than details) and turn off the JavaScript compilers (JavaScript runs always, but by a slower lane). Not sure that disabling these compilers would help.
It doesn't sound like some essential script files are not not running, or maybe even not loading...
Your list of extensions, I'd be more suspicious of HTTPS everywhere. If force you HTTPS on a site that is not designed for it, a lack of content may occur. Often this would be indicated by a joint active content blocking icon in the address bar (shield icon) to the left of the URL. If you see that, read this article for more information: joint in Firefox content blocking
(When I try to access https://www.tumblr.com/dashboard it redirects to http://www.tumblr.com/dashboard as if he is not supposed to go this way.)
Tags: Firefox
Similar Questions
-
Unable to connect using the current password
Using the current password which only had 6 characters - have now changed to 8 hope if this helps solve the problem.
Have you noticed too there was an update of Mozilla on my laptop the day before that this problem then this could be the reason?Unable to connect using the current password
It is far from a complete problem description.
Please explain in detail- what you were doing
- That's happened
Using the current password which only had 6 characters
6 characters is a very weak password. Consider using a password manager to generate longer and more complex passwords and to remember these passwords.
-
HOW CAN I GET A HP LASERJET 4V IN ORDER TO PROPERLY USE THE OPERATING SYSTEM TO XP PRO AND USB USING A PARALLEL CABLE?
The printer works at all with this cable?
The cable has recognized and installed by Windows XP when you logged on to the computer?
If the cable has been recognized, what steps have you taken to install the printer then (be as accurate and complete as possible)?
You get an error message? If so, please provide, without paraphrasing.
This printer has already been installed on this computer? If so, with what type of connection?
And especially, what is the brand and model of the USB to parallel cable? Many of them do not work. See, for example, the comments here , which suggests that 25% of the units will simply not work. This seems to be one of these products you should buy at a local store, rather than on the Internet, then you can continue taking it back until you get a working unit.
-
Hi all
I use version 11.1.2.4.0 jdev to create mobile applications ADF.
I followed this tutorial
Oracle JDeveloper 11 g tutorials
problem is when I try to deploy the application to the emulator as defined in the above tutorial following error occurred.
[14: 00:46] deployment failed due to one or more errors returned by "C:\Documents and Settings\JK1309\My Documents\Downloads\adt-bundle-windows-x86-20140321\sdk\build-tools\android-4.4.2\dx.bat".
What follows is a summary of the returned error:
ERROR: No suitable Java is found. In order to properly use the Android Developer
Thank you
Manish
Thanks for answer and Billett shay.
Sorry for the late reply.
problem is solved.
I just need to set the java class path using environment variables.
-
After changing the orainventory place im unable to connect using the oracle user
Hello
IM using oracle 12 c on rhel 6 after correctly installing the software, I changed the location of oravinventory in/data/houses
/ u01/app/Oracle
After making these changes im is no longer able to connect using the oracle user...
also I back return changes I had made to the orainventory folder still unable to connect using the oracle user...
any help on this would be greatly appreciated
Sadia. wrote:
Hello
IM using oracle 12 c on rhel 6 after correctly installing the software, I changed the location of oravinventory in/data/houses
/ u01/app/Oracle
After making these changes im is no longer able to connect using the oracle user...
also I back return changes I had made to the orainventory folder still unable to connect using the oracle user...
any help on this would be greatly appreciated
Newer versions of oracle have implemented a great new technology to help solve problems, called "error messages." Unfortunately, I can't find any reference to an error message named 'is no longer able to connect.
And why you are moving your site from inventory? When you have installed oracle, he put the inventory where he wanted. There is no reason to try to change or replace.
-
I was migrating my main area which had previously been hosted elsewhere and his email to the catalyst for business.
I needed to re-create a mailbox which was also my adobe signon
so I've updated (successfully) my account login from adobe to another e-mail address
However, I am now unable to access to the my dashboard sales catalyst or support if I can sign here.
So I'm partially migrated but completely messed...
Any help appreciated because I have no idea how to get technical support... arrggghh!
Hello
I sent you a personal message, please follow the instructions to reach out to the support team.
-
Unable to resize using the drop-down list of image Photoshop 2015 CC
I recently had to rebuild my system (yesterday) include motherboard and computer.
That's why I need to download and reinstall Photoshop 2015 CC. It lies the new "PC name" resumed. I turned off the old system.
Problem.
When I try to resize any photo using the height or width of the Image - the Image size-, I'm unable to change the values.
Any ideas.
Chomp
Opens the dialog box resize the Image and you can target these areas? Have you tried resetting your Photoshop tools?
-
WCF error - unable to authenticate using the ' DoLoginByPass()
Hello
I can't run a WCF service in our new 6.1.1.1 test environment.
The WCF service is a custom web service, we have created to read the specific data of the object (e.g. plug) Prodika using Prodika framework.
The service works very well in 6.1.0.1-, it was installed in production
6.1.0.1 for a long time.
Now, we are testing the WCF service even against 6.1.1.1 and seems not be working properly. I can read the WSDL for the server,but when I call the service (using SoapUi) I get the following error.
I followed all the steps in the guide of Web services ' configure Application Programming Interface.Based on the below error you have ideas why we get this?
Thank you
ERROR:
" < s: Envelope = xmlns:s ' http://schemas.xmlsoap.org/SOAP/envelope/ ">
< Body >
< s:Fault >
< faultcode
" xmlns: a = ' http://schemas.Microsoft.com/net/2005/12/windowscommunicationfoundation/dispatcher "> has: InternalServiceFault < / faultcode > .
< faultstring XML: lang = "en - us" >not able to authenticate using the ' DoLoginByPass()' < / faultstring >
< detail >
" < ExceptionDetail xmlns =" http://schemas.DataContract.org/2004/07/system.ServiceModel "
' xmlns:i = ' http://www.w3.org/2001/XMLSchema-instance ">
< i: Nile HelpLink = "true" / >
< i: Nile InnerException = "true" / >
< message > not able to authenticate by using "DoLoginByPass()" < / Message >
< StackTrace > <! [CDATA [to WCFPlatformExtensions.ExecContextCallInitializer.BeforeInvoke (InstanceContext instanceContext,
Channel of IClientChannel, message)
at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InitializeCallContextCore (MessageRpc & CPP)
at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InitializeCallContext (MessageRpc & CPP)
at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin (MessageRpc & CPP)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5 (MessageRpc & CPP)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage4 (MessageRpc & CPP)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage3 (MessageRpc & CPP)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage2 (MessageRpc & CPP)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage1 (MessageRpc & CPP)
at System.ServiceModel.Dispatcher.MessageRpc.Process (Boolean isOperationContextSet)]] > < / StackTrace >
< Type > System.ServiceModel.Security.SecurityAccessDeniedException < / Type >
< / ExceptionDetail >
< / details >
< / s:Fault >
< / Body >
< / s: Envelope >Configuration of the FILE EnvironmentVariables.config:
#Integration services
Prodika.ProdikaAPI.SysUser = [ProdikaApiUser]
IgnoreMe = Prodika.ProdikaAPI.SysPassword
Prodika.ProdikaAPI.IsLoginBypassOn = true
Prodika.ProdikaAPI.IsUseTrustedAuth = true
6.1.1.1 and the last Packs of extensibility (3.0 and higher), the Prodika.ProdikaAPI.SysUser must be out of the environmentvariables.config file. It must now be configured using the SetupAssistant tool.
-
How to properly use the fonts Web of Adobe Edge
I am a newbie to Dreamweaver and am trying to learn to use it through the tutorials. I am stuck at part 3, try to use Web Adobe Edge fonts correctly in my web site. I can say that I followed the instructions in the tutorial correctly, but the effect of font style is not displayed on my site. I work on a Windows 7 machine and using Dreamweaver 5.5. I copied and pasted the javascript code in the correct point in the head of the index.html page that included the font family name in the CSS file and saved the whole smash. The source code of my index page looks exactly like the sample in the tutorial, and I tried see my site in my browser, but no dice. Does not display the Web dashboard font style in the web page. I think I did everything following the directions, but I guess I missed a detail. All suggestions greatly appreciated
You must add a
CSS:
H1 {}
Police-family: League Gothic, without serif.
make-weight: bold;
color: #639;
font size: 250%;
}
A simple way to get the correct codes is to go to Adobe Edge Web fonts and select the font you want to use.
https://edgewebfonts.Adobe.com/fonts
NOTE: You will not see the custom web fonts displayed in Design, Live View mode, or when you preview locally unless you use a local test server. An easier way to test is by downloading the page on your remote server.
Hope this helps,
Nancy O.
-
I'm develpoing apps using the SAPI, TAPI, however, I'm stuck with a fundamental question... when I dial a number, I can hear the ringtone on the speakers of the laptop... and I can hear the person on the other side as well... but he can't hear me... and as soon as the others left up to the 'Phone dialer' pcks pops up a window with two buttons... 'Talk' and 'Hang up', when I press the talk button, the line is automatically disconnected. Pleas help to solve this problem...
Hi abhi.jeet,
Thank you for visiting the website of Microsoft Windows Vista Community.
The question you have posted is related to application development and would be better suited to the MSDN Community. Please visit the link below to find a community that will provide the support you want.
http://msdn.Microsoft.com/en-us/default.aspx
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
This one is strange - and I repeat that the problem is that I can't access the internet by using the administrator account. The guest account works fine. All programs are there and launch the fine (IE, Live Messenger, Yahoo Messenger, etc.), but they cling right there when I try to log on or access to any Web site.
While in the administrator account, I ran "CMD" in the run menu and can ping Yahoo, Google, etc. with success. It's embarrassing - any ideas how the administrator account can act that way then the guest account works perfectly?
Hello Allen LaBrune,.
If you are able to ping the websites from the command prompt, it means that your computer connectivity is fine.
· What is the antivirus installed on your computer protection software?
· Have you tried to browse by disabling the firewall?
Try disabling the firewall on the computer and check if you are able to navigate.
If this does not work, reset Internet Explorer settings and check if you can browse.
To use the feature reset the settings of Internet Explorer in the Control Panel, follow these steps:
1. exit all programs, including Internet Explorer (if it is running).
2. If you are using Windows Vista, click Start, type the following command in the start search box and press ENTER:
Inetcpl.cpl
The Internet Options dialog box appears.
3. click on the Advanced tab.
4. Under Reset Internet Explorer settings, click Reset. Then click again on reset.
5. when Internet Explorer has finished resetting the settings, click close in the reset Internet Explorer settings dialog.
6. restart Internet Explorer.
For you reference, you can visit the link for the following Article:
http://support.Microsoft.com/kb/923737Thank you
Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.
-
How to properly use the "blackberry.app.exit"/"swipemenu"?
Hello developers BB!
Can someone show me how to use this feature? I use a physical PlayBook.
I tried to use the following code:
The config.xml file have this feature:
But when touching, nothing happens.
The bbui.js is necessary?
Or I use the wrong library/code?
Also how to call an action by using the upper frame by scanning?
for example:
function something()
{
use the topswipe
blah blah blah, this is the case
}
Thanks in advance for answers!
Once more, I am so used to seeing the reference to the webworks.js file, I has not yet noticed that was missing in your sample.
You must include the library that defines the API blackberry.*. Here's how you do that: