Unable to reach or to authenticate to a new homegroup
Original title : what is worng with my home group
greetings to all.
I use Windows 7 ultimate 32-bit os. I am trying to create a homegroup, it does not join. I get no error message. I am able to create the home group (HG), but on the other computer which has windows 7 ultimate 32-bit, it cannot accept the password, tried to change the password and also tried without success. Network troubleshooting I tried and convenience store HG on both computers. deleted the HG and created on another computer but the problem is the same in the 1st computer it won't take password it just hangs...
what I did to solve is: -.
Update the firmware on the router that I connect wireless on both computers
the wireless card update
disabled, anti-virus and firewall on both computers
as I said most early tried two convenience stores
checked with different router
disabled password and sharing in other ways as well
network discovery is on
Update windows\
Done SFC and no problem
Finally, I tried to access the network without hg folder
and when the password was not activated, I wasn't able to access the shared driver that he was showing empty and when I enabled sharing of password I was able to access the shared folder
I tried to give permissiosn for sharing and permissions of folder for everyone and I'm only using 2 computers so that I can share my drive external HARD with my roommate...
Help, please...
Please let me know if you need info...
I'm willing to give more info, but please help it is a request...
Hello
Disable the password of sharing on both computers to see if that helps.
Start - type in the search box - homegroup - find top and Double click in - change
avancΘs sharing - sharing protected by password - tick Turn off password protected
share - SAVE the changes.
I guess that one of the computers running something or it has been implemented to
prevent the homegroup to work. Homegroup settings is actually fairly simple, unless
It happened. What it is may be hard to find.
-----------------------------------------------------------------------------------------------------
Try a clean boot to see if that helps - clear all the not not necessary to support
the HomeGroup and Windows Basic.
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html
Autoruns - free - see what programs are configured so that it starts automatically when
your system boots and you connect. Autoruns also shows you the complete list of the registry
and where applications can configure Auto-start for the files settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
Tags: Windows
Similar Questions
-
Unable to reach Rise of Nations: Gold Edition Gamespy internet of matching games.
Dear Microsoft Answers,
I seem unable to reach (and people seem unable to join games I host.) all RON: GE of the internet multiplayer games despite using the solutions found in several previous posts, which one to disable my firewall/antivirus, a start-up in minimal mode and open ports,
Help, please!
Alexfy
Hello
Your investigations would be better suited to the community for Rise of Nations. Attached is a link that should point you in the right location. I hope that this information is beneficial.
http://www.Microsoft.com/games/riseofnations/community.aspx
Thank you
Aaron
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Original title: windows 7 https: or http:
Windows 7 has htpps: or just htpp:? I read that after January 1, if you do not have htpps: you will be unable to reach many sites. I thought I'd get a computer with Windows 7 on it, but do not know if it will be obsolete.
In systems prior to Windows 7 with the latest browsers, there will be a problem. Web sites are migrating sonething called SHA1 to a new more secure version.
You can read about it here
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/will-Windows-Vista-PCs-be-effected-by-the-SHA-1/1d05449a-A1A5-4b45-BA4F-baa959bd202d
-
Unable to reach the other subnet to VPN
I need the vpn users to access the resources of the SITE-A. VPN access all the resources of the SITE B but unable to reach all servers in A SITE. ASA, I can ping servers A SITE without any problem. I tried to configure the tcp-bypass (http://packetflow.io/2014/03/asa-hairpinning-and-tcp-state-bypass.html) but still not able to reach A SITE. I also tried the crossed this site (https://nat0.net/cisco-asa-hairpinning/) and still no luck. Any idea is appreciated. I can provide SITE-B router config if necessary.
DNS-guard
mask pool POOL-VPN-IP 10.240.25.15 - IP 255.255.255.0 10.240.25.50
!
interface Ethernet0/0
Speed 1000
full duplex
nameif OUTSIDE
security-level 0
IP 10.0.0.1
!
interface Ethernet0/1
No nameif
no level of security
no ip address
!
interface Ethernet0/1.10
VLAN 10
nameif inside
security-level 100
IP 172.18.83.250 255.255.255.0
!
interface Ethernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
Shutdown
No nameif
no level of security
no ip address
!
boot system Disk0: / asa916 - k8.bin
passive FTP mode
clock timezone PST - 8
clock summer-time recurring PDT
DNS domain-lookup OUTSIDE
domain-search DNS inside
DNS server-group DefaultDNS
Server name 172.18.83.10
Server name 172.18.83.11
Name-Server 4.2.2.2
domain.com domain name
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
the object OBJ - ANY network
subnet 0.0.0.0 0.0.0.0
service object MSTSC
service destination tcp 3389 eq
network of the VPNPOOL object
10.240.25.0 subnet 255.255.255.0
object SITE-B network
172.18.83.0 subnet 255.255.255.0
object SITE-A network
172.18.80.0 subnet 255.255.255.0
object-group, INTERNAL-LAN network
object-network 172.18.83.0 255.255.255.0
standard access list permits 172.18.83.0 SPLIT-TUNNEL 255.255.255.0
standard access list permits 172.18.80.0 SPLIT-TUNNEL 255.255.255.0
OUTSIDE_access_in list extended access permitted ip object VPNPOOL SITE-a.
Outside 1500 MTU
MTU 1500 inside
IP verify reverse path to the OUTSIDE interface
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 743.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (INSIDE, OUTSIDE) static source SITE SITE-B-B static destination VPNPOOL VPNPOOL non-proxy-arp-search to itinerary
NAT (INSIDE, OUTSIDE) static source SITE-has-a-SITE static destination VPNPOOL VPNPOOL non-proxy-arp-search to itinerary
!
object SITE-B network
dynamic NAT interface (all, OUTSIDE)
Route outside 0.0.0.0 0.0.0.0 X.X.X.X 1
Route to the INTERIOR of 172.18.80.0 255.255.255.0 172.18.83.1 1
dynamic-access-policy-registration DfltAccessPolicy
action to terminate
dynamic-access-policy-record VPNTUNNEL
AAA-server VPN-users ldap Protocol
AAA-server VPN-users (INSIDE) X.X.X.X
LDAP-base-dn DC = DOMAIN, DC = com
LDAP-scope subtree
LDAP-naming-attribute sAMAccountName
LDAP-login-password *.
LDAP-connection-dn CN = CISCO, OU = Service accounts, DC = DOMAIN, DC = com
microsoft server type
identity of the user by default-domain LOCAL
AAA authentication http LOCAL console
LOCAL AAA authentication serial console
the ssh LOCAL console AAA authentication
Enable http server
Server of http session-timeout 60
redirect http 80 outside
No snmp server location
No snmp Server contact
Telnet timeout 5
Console timeout 0
management-access INTERIOR
No ipv6-vpn-addr-assign aaa
no local ipv6-vpn-addr-assign
a basic threat threat detection
threat detection statistics
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
SSL server-version everything
client SSL version all
SSL-trust VPNCERT OUTSIDE point
WebVPN
allow outside
AnyConnect essentials
AnyConnect image disk0:/anyconnect-win-3.1.09013-k9.pkg 1
AnyConnect image disk0:/anyconnect-macosx-i386-3.1.09013-k9.pkg 2
AnyConnect enable
tunnel-group-list activate
attributes of Group Policy DfltGrpPolicy
VPN-tunnel-Protocol ikev1, ikev2 ssl clientless ssl ipsec l2tp client
value by default-domain domain.com
Group Policy GroupPolicy_VPN SITE internal
attributes of Group Policy GroupPolicy_VPN to SITE
WINS server no
value of 172.18.83.10 DNS server 172.18.83.11
VPN - 4 concurrent connections
VPN-idle-timeout 120
3600 VPN-session-timeout
client ssl-VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value of SPLIT TUNNEL
value by default-domain domain.com
WebVPN
AnyConnect mtu 1200
time to generate a new key 30 AnyConnect ssl
AnyConnect ssl generate a new method ssl key
AnyConnect ask flawless anyconnect
attributes global-tunnel-group DefaultWEBVPNGroup
LOCAL VPN users authentication-server-group
tunnel-group VPNTUNNEL type remote access
tunnel-group VPNTUNNEL General attributes
address IP-VPN-POOL pool
LOCAL VPN users authentication-server-group
Group Policy - by default-GroupPolicy_VPNTUNNEL
management of the password password-expire-to-days 7
tunnel-group VPNTUNNEL webvpn-attributes
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the ftp
Review the ip options
inspect the pptp
inspect the tftp
inspect the icmp
class class by default
Statistical accounting of userIt is most likely your problem then. Your VPN clients, 10.240.25.0/24 can get to the Site, but because the Site doesn't know how to return to 10.240.25.0/24 traffic is lost. You will need to advertise out of site B.
-
There was problem, order processing, please contact customer care on 8000-448-1642. But unable to reach them. Please notify
Please contact support:
I hope this helps.
Concerning
Megha Rawat
-
Hi, I tried to download the trial version free photoshops and after I sign in I get this pop up message saying ' unable to reach adobe servers please check your firewall settings ", I checked them and there is nothing wrong with the firewall, is there a problem with the adobe servers? can someone help me?
Please try the steps mentioned in: https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-
I'm unable to use my Apple ID on my new iPad... Please help!
iI am unable to use my Apple ID with my new iPad... Please help
Hello
Can you give more information?
What happens when you try to use the apple ID?
See you soon
Brian
-
Unable to see the ability to create a new folder on my desktop when I right click of the mouse. It shows now shortened? compressed file? etc... Please help me solve this problem?
What happened a bit in the past, but it happens a lot recently.
How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html
If still no joy, see the 'response' by Linda Yan in this thread.
http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf/#99395761-56de-4a76-8C2A-eab498ad735a
Tip: When you save the text in Notepad, the default file format is .txt. Replace all files.
-
I'm unable to install my Lightroom CD on a new computer with Windows 10. Is there a simple guide in plain English? I do not understand computerese.
Use a browser that allows cookies and pop-up windows, please contact adobe for hourly pst support by clicking here and, when it is available, click "still need help," https://helpx.adobe.com/contact.html
-
I'm unable to install CS4 master collection in my new Mac.
I'm unable to install CS4 master collection in my new Mac.
Yes.
Follow please: Activate and deactivate Adobe products
-
Suddenly unable to reach any Mac wireless network
After a reboot, my mac has forgotten its entry preferences, which have been quickly restored.
However, I am now unable to join any wireless network, the hotspot or wifi.
Networks are visible and 3 bars. I have no problem to reach the networks from other devices.
I tried to turn routers/off voltage, off/on power mac wifi. I joined wifi networks, where I am asked to enter the wifi password, but the end result is the same.
I ran the Diagnostics, but I don't mean anything to me.
I have Time Machine backups, but I do not know which bit to restore.
Help is appreciated.
What happens when you run the diagnostics?
Other devices connect OK via wifi?
Can you connect via a cable Ethernet/as a test?
Press on and hold down the Option key and click on the wifi icon in the menu bar. After a screenshot of the window that opens
-
ipad3 wifi is unable to reach her since OS9.3.2
Since the OS9.3.2 download my ipad3 joined networks wifi ok unless a second stage of authorization is required when it is unable to join. Is there a job autour or correction?
Try troubleshooting if the use of this If your iPhone, iPad or iPod touch connects to a Wi-Fi - Apple Support Network
-
I have dfx audio enhancer, won't work in 13.1 I paid for this I need to go back to 12 or 11. can not reach mfg
Hello, maybe it's a bug in the plugin flash adobes 11.3 - other users have also reported problems with the sound once the plugin has updated.
Please refer to the following entry in the FAQ on how to deal with this problem or report the problem with the details of your system from adobe.
http://forums.Adobe.com/message/4483563
https://BugBase.Adobe.com/index.cfm?event=bug & ID = 3210964
in the meantime, you can try to remove flash 11.3 of the section of the configuration/program windows downgrade to an earlier version & Control Panel, until adobe fixes these problems.
-
Hello
Good evening everyone.
I had a problem in Routing and remote access on windows 2003 server. This server is already configured as a file server, domain server, and application server. Also configured as a router (thanks to access routing & remote) to connect the three different networks with each other. If this server has three NICs installed and each separate NIC network cards represent.
three different networks are - 192.42.160.0/24, 192.42.161.0/24, 192.42.162.0/24
Three cards of the NETWORK adapter installed on the server as with the IP - next
NIC - 1 = 192.42.160.220, Sub - 255.255.255.0, gateway - No.
NIC - 2 = 192.42.161.220, Sub - 255.255.255.0, gateway - 192.161.220.112 (this ip address for internet access then 4 g router IP)
-3 = 192.42.162.220, NETWORK cards, Sub - 255.255.255.0, gateway - No.
Now the question is I can get Internet & (also scathing in router ip 192.42.161.112) one network i.e. - 192.42.161.0/24, BUT when I try to access the internet from another two network (192.42.160.0/24 & 192.42.162.0/24) I can not access and in addition can not ping to internet router ip - 192.42.161.112...
So, how do I access the internet to another two network also?
I was already the configuration of static routing for all three network but I wasn't always successful. I don't really know what exactly static routing this should be done in access routing & remote area so that all three network can reach to the internet?
Here is the result of the current track...
D:\Documents and Settings\Administrateur > route print
IPv4 routing table
===========================================================================
List of the interface
0x1 ........................... MS TCP Loopback interface
0x2... 00 30 05 8f ad 5 c... Broadcom NetXtreme Gigabit Ethernet - Mi Teefer2
niport
0 x 3... 0E 00 c4 f8 a7 0c... Network Intel(r) PRO/1000 GT Desktop Adapter - Teefer2 M
iniport
0 x 4... 0E 00 0c a7 c5 85... Intel (r) PRO/1000 GT Desktop Adapter #2 - Teefer
2 miniport
===========================================================================
===========================================================================
Active routes:
Network Destination gateway metric Interface subnet mask
0.0.0.0 0.0.0.0 192.42.161.112 192.42.161.220 1
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
192.42.160.0 255.255.255.0 192.42.160.220 192.42.160.220 20
192.42.160.220 255.255.255.255 127.0.0.1 127.0.0.1 20
192.42.160.255 255.255.255.255 192.42.160.220 192.42.160.220 20
192.42.161.0 255.255.255.0 192.42.161.220 192.42.161.220 20
192.42.161.220 255.255.255.255 127.0.0.1 127.0.0.1 20
192.42.161.255 255.255.255.255 192.42.161.220 192.42.161.220 20
192.42.162.0 255.255.255.0 192.42.162.220 192.42.162.220 20
192.42.162.220 255.255.255.255 127.0.0.1 127.0.0.1 20
192.42.162.255 255.255.255.255 192.42.162.220 192.42.162.220 20
224.0.0.0 240.0.0.0 192.42.160.220 192.42.160.220 20
224.0.0.0 240.0.0.0 192.42.161.220 192.42.161.220 20
224.0.0.0 240.0.0.0 192.42.162.220 192.42.162.220 20
255.255.255.255 255.255.255.255 192.42.160.220 192.42.160.220 1
255.255.255.255 255.255.255.255 192.42.161.220 192.42.161.220 1
255.255.255.255 255.255.255.255 192.42.162.220 192.42.162.220 1
Default gateway: 192.42.161.112
===========================================================================
Persistent routes:
NoneSorry if I'm not able to explain properly. Please let me know if you have to explain more about it...
Thank you all.
Mahesh
Hello Manu,
Please post this question in the forums TechNet for Windows Server 2003. They will be able to guide you further.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home
-
Hello, I have laptop Aspire R5 - 471T - 71W with the NIC of the Qualcomm Atheros QCA61x4A wireless. I have the Linksys WRT1900AC wireless router configuration to support the chain of 80 MHz, I have the latest Firmware & drivers for installed devices. Run Win10 pro on the Aspire. Even in the same room that the WRT1900AC router, longs it reached only 802.11n connection speed. How will I know if I'm actually in 802.11ac and Win10 falsely reported my connection speed using the details of the network & sharing Panel as 300Mbps?
Hello Jordan,.
Thanks for the pointer... I had two bands with separate SSID. Channels of communication were also in automatic. What I didn't have was the network Mode in the joint framework. Documentation of Linksys seems to be lacking on how these parameters affect the configuration of the WRT1900AC AC speed.
I am now at 866,3 Mbit/s.
Thank you for your prompt and accurate diagnosis of the root cause.
Steven Sutherland
Maybe you are looking for
-
M4V will not play after the update of the Sierra
I have a number of m4v files that will play is more in quicktime or iTunes after my update for Sierra on my MacBook Pro and iMac. The audio plays fine but the video freezes on the first few frames. I have no problem with those files previously. Any s
-
Buy an Ipad opportunity - software issue
Hi all, you plan to buy a 2nd hand ipad. Someone told me I can have problems with software compatibility. You can give me advice, for example if I were to buy a 2nd Gen is this likely to cause me problems at all now or in the future? I would use it
-
Camileo S20 - HD 1080 p or not
I recently bought a Camileo S20 under the impression that it would record on 1080 p. It would be nice for my shorts. However my shots look like anything some of the shots online, I saw that were crisp clean and not grainy. Every time I have pictures
-
Were cut during a relocation speaker wire and connectors HCD-GX9900 lost and I cannot locate a source.
-
Change the size of the brush will not work
HelloTwo days ago, I was able to change my Photoshop brush size and hardness by dragging my mouse while pressing ctrl + alt on my Mac, but today it no longer works. I reset all my settings and also the Brush tool, but it will not work. Does anyone ha