Unable to restore iPhone to factory settings

Similar Questions

• Restore iPhone to factory settings

  By Apple, I was told that I have to reset my iPhone 5 s for the original settings in order to get text messages to work.  Would this work really?

  If you cannot send or receive messages on your iPhone, iPad or iPod touch - Apple Support

  In some cases yes, but I would try and reset network settings first as well as a hard reset.

  Settings > general > reset > reset Network settings.

  Hard reset-Hold sleep/wake and home button for 30 seconds.

  If none of this works, I then try and difficulty resetting your iphone iMessages

  First, make sure that you have saved to iCloud or your laptop / PC

  then settings > general > reset > erase content and settings.

• Cannot restore to the factory settings

  
  

  I have the Acer Aspire 7741z laptop. The computer has frequent problems, and I want to restore it defaults. I've already saved important files and had planned to do a full restore to the factory settings, but the eRecovery program does not work for me. It starts the process, says that it needs to restart, check I want to replace the data on the hard drive and restarts. The problem is, it just restarts. No recovery process, no reset factory default. Alt + F10 during boot process does nothing.

  I checked the partitions still exist, and I made no changes to the system since the purchase (about formats, etc.). Of course, I'm no longer under warranty period, it seems getting direct support from Acer is not going to happen.

  If anyone can help? I really want to restore this laptop to its default settings.

• After a restore to the factory settings, where personal files are?

  I recently had a problem on my laptop (gateway) that prevents Windows to boot the system.  I went through the automatic tests on splash screens.  Files were good, the disk check was good, went to a restore point, but still was not able to start.  I got a message that there was no specified "configuration change".  So I chose the option to restore factory settings.  I didn't need a disk to do - it took place without no boot disk required.  There was a message related to the restoration who said that my files could be stored on the hard drive partitioned part.  I couldn't get to my personal files anyway, so I decided to take the chance to do the restore and hope that Windows would save my stuff.  Well, Windows is running, but I can't find my files.  The page of my computer shows 2 hard drives, 'Local' and 'Recovery', but I don't know how to access recovery or if my files are still there.

  Is there a chance that my stuff is still in this machine, or I'm just the GROUND?

  Thanks in advance for any kind souls who can solve the riddle!

  Hello

  "Recovery" partition will be the software that was used to perform the recovery to factory settings.

  We should never touch except to make recovery disks, failure of hard disk for you to reinstall Vista on a new hard drive.

  Windows does not save your data when you perform a restore to the factory settings.

  Your recovery software factory settings is provided by the gateway.

  It is an Option in their software.

  It is the gateway to this topic information.

  "Restoration with automatic data backup.

  http://support.gateway.com/s/software/MICROSOF/Vista/7515418/7515418su532.shtml

  All files and existing files are copied to the C:\Backup folder on the hard drive and a new copy of Windows is installed.

  You will need to contact Gateway Support and ask them where to find your data saved their recovery process if the information above did not save where gateway said it would.

  http://support.gateway.com/us/en/support/default.aspx

  See you soon.

• Can someone help me? my pc not to remember my display settings after a system restore to the factory settings

  I had to restore my pc to factory settings. And now I am unable to use my lcd hd tv as a monitor... I could do before you restore my pc. Any help with this would be much appreciated

  my pc not to remember the settings.and of display for Office moves to the right

  Hello

  Method 1: I would suggest to run set to go to the following link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

  Method 2: I also suggest you follow the link below in the form of measures: http://windows.microsoft.com/en-GB/windows-vista/Troubleshoot-multiple-monitor-problems

  Hope this information is helpful

• Do I restore laptop to factory settings after the plague of virus?

  Invaded by virus quarantined files because they cannot be deleted. "System Restore" is not working now.
  Can I restore laptop to factory again?

  Of course you can do it. Please use recovery media delivered. On this way the unit will be to new factory settings. The installation is very simple.

  Good luck!

• Satellite Pro L450d-12 x help restore to the factory settings

  I want to go back to the complete factory settings (as if windows has been reinstalled)
  There is no repair option in the advanced startup options (are there all the other options)
  If I go into disk management, I can see
  (C)
  recovery_data (D)
  (anonymous) (OEM partition)

  all the these have the status of healthy.

  There recovery.wim in the d drive, and a winpe.wim

  There are a lot of educational software that came on the phone that I do not have the cd. So, I don't want a new installation of windows.

  I tried to do a system repair disc, it upward with could not be created (0 x 80070057) so I'm not able to boot from the cd

  Is it possible to reset to factory settings complete with recovery or partition without a name?

  For future referance that is needed (a? or other? or both?) windows restore disk 7 oem 32-bit pro (version of windows I use) or the pro L450d-12 x recovery disk toshiba satalite?

  Thanks in advance

  > Is it possible to reset to factory settings complete with recovery or partition without a name?

  In General, you have two options:
  Either you try to retrieve the laptop using recovery disk as described here:
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm
  or you will recover the laptop using the Toshiba Recovery disk which you likely has not been created in the past using Toshiba Recovery Media Creator. Right.

  Well, if the recovery of HARD drive does not work (whatever the reason), then you must use the recovery disc. If recover disk has not been created in the past, you can order the CD here:
  http://backupmedia.Toshiba.EU/landing.aspx

  This info has been helpful?

• Recovery disk restore partitions as factory settings?

  My laptop is about 2 to 3 years of age and has 3 partitions, C, D and E as factory put in place.
  I found that the system (C) partition is now almost full and cannot be extended because the D drive is in the way to rehabilitate the part of drive E.

  Does anyone know if the hot spare will restore the partitions in the form of factory settings or y at - it an option to change the score put in place during installation?

  Hey Buddy

  Yes. As far as I know the Toshiba Recovery disk format the whole HARD drive and retrieves the laptop back to factory settings.
  This means that the whole HARD disk would have first formatted and all partitions would be deleted. Then the recovery disk creates the partitions again and installs the operating system and other things like tools and drivers.

  See you soon

• How can I turn off the laptop after restoring it to factory settings?

  Hello everyone

  I'm selling my Portege R830-10 q If I want to restore it to the settings to factory (out-of-box state) AND THEN TURN IT OFF.

  I brought the laptop to factory settings successfully using the _TOSHIBA recovery Wizard_ and choosing * factory default software recovery (Recover State out-of-box) *. However, at the end of the process of recovery and after everything is back in place I was not able to TURN off the POWER to the laptop. It only gave me the option to restart. After rephrasing it, the Windows installation process starts.

  I don't want to install Windows, i.e. language, keyboard, user account, etc. I want to leave the Windows installation for the person buying the laptop to me. How can I turn off the laptop after the recovery of the system without having to install Windows?

  I would appreciate your help.

  Concerning

  Pedro

  When the recovery process is complete and you are prompted for a reboot just press start button / stop and turn it off. I think it's only thing you can do.

  Anyway, why not start Windows and go through the configuration option. New owner can modify this basic anyway parameters. As username Admin and language and the keyboard can be set as default.

  For example, if you have a picture of German recovery set to German. New owner can change in any case.

• HP Envy 15-k201na: restore to the factory settings corrupts the files/windows Boot Manager

  I wanted to restore my computer laptop back to factory settings. So I went into settings and navigated to the update and recovery, recovery and then clicked the option restore factory settings. I had several partitions then asked me if I wanted to delete all of my drive or to remove all the windows disk was installed on. I clicked on the remove all option. Everything was erased from my laptop, I think that the boot partition has been altered to. Now when I start my laptop 0xc00000000f error code occurs and he said: 'you will need to use recovery tools. If you don't have any facility (such as a disc or USB device) support, contact your administrator for PC or PC/manufacturer. »

  Is there a way to fix this? My laptop still warranty HP on this subject.

  A system image restore fixed my PC; I used recovery media to recreate the image on my PC.

• Restore everything to factory settings.

  I have a HP Pavilion 521N Home Edition Version 2002 with Service Pack 2 of Office I got from my grandmother. The computer is running extremely slow. I want to restore it to factory again. I do not have a disk. I noticed that she has been commissioning, if I hit F10 it gave me a chance to do what I'm trying to do. Is the right way to do it or there at - it another way?

  Thank you, Dan cotton

  No, you guessed it! Press F10 and enter the HP recovery process. Use the advanced settings and perform a full recovery destructive. Once the recovery process is finished (and be patient, a lot of programs will be installed after you get in Windows), uninstall the software obsolete/undesirable/trial. Upgrade to XP Service Pack 3 and make all Windows updates. Install current versions of common programs such as Adobe Reader, Java, Flash, Shockwave, etc. Install a good antivirus like NOD32 (commercial), Avast or Avira (the two of them have free versions) and enjoy your "new" computer MS - MVP - Elephant Boy computers - don't panic!

• Reinstall Office Suite after the restore computer to factory settings

  I had to restore my laptop to its factory settings because of a corrupted registry.  The operating system is Microsoft Vista Home Premium, and more desktop I want to reinstall is Office home and Student 2007.  I inserted the disc and rises the .exe file, but it will be only to configure the system.  The applications are not installed.  Or bring it to the top of the window with the license agreement, or a dialog box to enter my product key.  I tried to run the Setup for the individual applications (e.g., Word) files and I got an error.

  Your machine initially has any Office Suite, perhaps a trial, pre-installed?  Is there something in the Control Panel / programs and features, which relates to the office?

  When you insert your CD it offers it the window of Autorun with the option to 'Explore' the files on the CD?  If so do you see a Setup.exe in the first visible display of the CD Explorer window.  If so do you have a better result if you right click on a Setup.exe it and select the option "Run As Administrator"?

• Cannot restore laptop to factory settings

  HP laptop Dv6-6b50sa QG797ea #ABU

  I need to restore this machine on the factory settings. Tried pressing the F11 key at startup to the top, but it does nothing

  Hi yewtree,.

  Boot Windows, hold down the Windows key and press R.  In the run box, type compmgmt.msc , and then press ENTER.  Click on management of the disks in the left pane and when loaded partitions, make a right click of the recovery Partition and mark it as 'active '.  Close all open windows and then restart - if it worked, the laptop boot from the recovery Partition during the restart.

  Let me know.

  Kind regards

  DP - K

• How long to restore pc to factory settings?

  I have a pc compaq presario cq5320f dual processor. I got a virus received discs to restore the factory settings. I tried last night CD everything worked well but he always took to install new software (13 hours) hp will not help as they say its out of warranty... Got up today... Was not finished yet as advised to me so I started again... It was about 2-3 hours now... Anyone know if this is normal... ? A guy that I talked about at HP said it can sometimes take a long time... He said a guy it took FORTY-EIGHT hours to install (does not work after that) any feedback is greatly appreciated.

  Hello denicemd: 1st of all why not try this:

  1. remove all the parts of your computer except keyboard & mouse

  2. with your recovery media in your optical drive press the "F8" key to install all via "safe mode".

  3. If she asks you can choose the administrator who pick rather than your own name to follow what you see on your screen

  Sometimes, that's what a pc should be normal

  4. run chkdisk or scandisk with all the options checked to eliminate problems of HD

  5. while still in safe mode, download an antivirus & antispyware apps at least

  6. when linking your stuff

  After that unless you need a new HD I would be very surprised if you didn't have a full recovery!

  Good luck

  hope this helps

  spacechild

• Restore PC to factory settings

  original title: restore pc

  I need to restore my Dell Inspiron its parameters. Dell factory image is missing with F8, and I don't have an installation disc. I need a free download site or a command prompt to perform this task. HEEEEEEELLLLLLLLPPPPPPPP!

  Contact Dell as to why the recovery Partition does not work.

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get the recovery media Vista to make it back to factory settings .

  There is no Vista free download legal available.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

  Call Dell and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner