Unable to restore my laptop to factory settings?

How can I restore to the factory settings when I tried the zero and F12 button and they do not work?

Hello

Please be so kind and tell us what model phone you have and which OS is pre-installed?
Original version of the OS is installed on your machine (factory settings)?

Anyway, check it please http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

Tags: Toshiba

Similar Questions

  • I have restored the laptop to factory settings, the product key sticker is faded... While the re-activation of it Microsoft office said "this is not a valid product key Office...". »

    I bought my laptop with microsoft office 2010 is installed. I restored my laptop to factory settings, the product key sticker is faded so I used jellybean keyfinder to get it. While the re-activation of it Microsoft office said "this is not a valid product key Office...". »

    What should I do to make it work again?

    Please note that if you use the Windows 7 product key located on the certificate of authenticity attached to your system label, this will not work, it is only for Windows 7. You need a product key Office 2010. Also using the value default key OEM SLP for Windows 7 does not work with Office 2010

    If your computer comes with a trial version of Office, you need to get a trial key or buy a full license:

    Trial license:

    http://Office.Microsoft.com/en-us/try/

    Full license:

    http://support.Microsoft.com/kb/823570

    Get the key;

    http://Office.Microsoft.com/en-us/buy/redir/XT101874326.aspx?CTT=5&origin=HA101847520

    If you purchased Office 2010 and get no valid product key error to refer the article mentioned below:

    http://support.Microsoft.com/kb/2002262

    Frequently asked questions about Office Activation Wizard and about features in Office 2010 and Office 2007 programs view programs

    http://support.Microsoft.com/kb/927921

    Error message when you start an Office application after installing a suite Office: "invalid product key".

    http://support.Microsoft.com/kb/836178

    If you have a trial version of Office 2010 that came with your computer, try to uninstall it first:

    Run the patch tool mentioned in the article below to uninstall Office 2010:

    http://support.Microsoft.com/kb/290301

    Download a trial version of Office 2010 that corresponds with the edition that you purchased and convert it to a version full:

    Trial license:

    http://Office.Microsoft.com/en-us/try/

    See the link on how to convert a trial version of a suite full Office 2010 or program to a commercial version: -.

    http://Office.Microsoft.com/en-us/project-help/convert-a-trial-version-of-an-Office-2010-suite-or-program-to-a-full-retail-version-HA101886436.aspx

    http://Office.Microsoft.com/en-us/buy/convert-your-trial-to-a-full-product-version-HA101812668.aspx?CTT=1

  • I want to restore my laptop to factory settings

    I want to restore my Asus laptop to factory settings. IM only 14 so I don't have any extra money to spend. Please answer my question as soon as possible. Thank you

    What you need is to find the Asus recovery in the main menu, and then make sure that the CD/dvd of popular recovery with her and then you can perform a factory restore.

    or

    Press F9 or F10shortly after connecting, you will have to the ASUS recovery partition. This will restore settings and all user data will be gone

  • How do I restore my laptop to factory settings?

    Toshiba how to restore factory settings (by pressing 0 on boot dosnt work)?

    Hi guys

    How can I restore my Toshiba L650 to factory settings? I haven't tried the 0 to start any work that I have installed a new version of w7 (from home premium to professional) and it is a little screwed to the top of my drivers and all Toshiba software.

    Thanks in advance!

    * ADDITIONAL INFORMATION * when I press ESC I get a red screen with white writing that says windows ith slic, windows without loader, windows with charger lic (US alternative method) etc... F8 lead me to repair your computer safe mode tc... fix your computer doesn t do anything to restore the factory settings. I heard on the bios, there is a button that takes u can't find it... Thank you again once in advance guys
    BTW I can't download the drivers, I m getting pretty annoyed now!

    Can I do a USB recovery?

    Installation procedure for recovery image, and how to do this, you can find on following Toshiba document - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
    > I installed a new version of w7...
    Did you clean Win7 excavation or update?
    Problem is that once the clean OS install of that you will not access the recovery image saved on the HARD drive and the best option for the installation of the system recovery disk using. Did you create recovery discs after recommendation of Toshiba?

    You cannot create USB recovery on this notebookmodel.

  • Administrator password to restore my laptop to factory settings

    I'm getting ready for my first semester of College, and my computer has been acting and is its slowness. There is so much space, it is actually easier to get rid of everything, restoring my computer. I want to restore my computer to its factory settings, but I have to log on as an administrator. I can't log in as administrator, because I don't know what is the password. Anyone know what could be the password by chance?

    Thank you!!

    Contact the manufacturer of the computer for the password to start the recovery to factory settings.

    Acer requires a password.

    See you soon.

    Mick Murphy - Microsoft partner

  • I can't restore the laptop to factory settings

    Hi guys, I recently received a large number of viruses on my Toshiba laptop and I pretty much cant get on the desktop because of it, so I decided to repair my laptop via records, but when I get this day with him, it gives me this error message
    "the file nvrd32.sys is not found."

    I did a lot of research on googled around and haven't found a solution so im posting this thread.

    I have a Nvidia Quadro GFX card if that counts for anything.

    I have 2 drives labeled "Drivers" and "XP SP2". I get SP2 on the laptop and I still get the same message, can someone help out me?

    Don't know what's this file, it could be a virus trying to spread.

    When Windows is virus and the operating system is damaged, it will never be the same.

    So your best option would be to recover your data and run the recovery of your recovery disks to restore Windows back to its factory condition.

    If you need a good tool to scan of viruses and spyware, install Avira and Spybot. (plus they are free!)

  • I restored my laptop to factory settings. When I reinstalled iTunes music to my iPod synced with iTunes but don't sync back with the iPod classic. Help why does?

    How to get music on my iPod? Is this possible? Help please I spent hours to try!

    In general try to sync an iPod with an empty library will remove the contents of the device. Except purchases of synchronization is iTunes to the device, even if the purchases can be copied into the other direction. See recover your iTunes from your iPod or an iOS device and make sure that you have really all media stored on the device and not, for example, a display of your purchase history is stored in the cloud.

    TT2

  • Recently, I restored my laptop to factory setting without saving my pictures. Can I pick up my pictures or are they lost?

    I recently restored my laptop to factory settings without saving my pictures are lost?

    Hello

    a clean install wipes the hard drive clean of everything

    You cannot undo what you've done

    If you have lost data, you can try this

    http://www.Piriform.com/Recuva

    Read also:

    Since we don't know exactly how you reinstalled it seek a windows.old folder

    How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation

    http://support.Microsoft.com/kb/932912

    or even return to a previous operating system by using the information in file window.old at the link below

    http://support.Microsoft.com/kb/933168

    If the above does not apply we can not help you

    Try the data recovery experts

    but they are very expensive

  • __Restoring your laptop to factory settings _

    I'm certainly not great computer so I need some help on how I would be able to restore my laptop to factory settings, since I don't have disks for it at all. I HAD PURCHASEED IT OF A FRIEND OF A FRIEND AND ALL THEIR INFO IS ON IT AND I have JUST the WANT DELETED.

    See which of these methods apply to you:

    Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

    They will tell you how to do this.

    Every computer manufacturer has their own way of making recovery disk/s.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Save all data, because it will be lost during a clean installation.

    See you soon.

    Mick Murphy - Microsoft partner

  • I can not play CD on my laptop because I restored it back to factory settings

    Separated from this thread.

    I can not play CD on my laptop because I restored it back to factory settings

    This error message you get?

  • How to do a restore of my acer laptop to factory settings

    Any1 can tell me how 2 Restore my acer aspire laptop 2 factory settings

    Without a specific model number or what operating system delivered to the unit, I can direct you to our base of knowledge and a few items that we have available that deals directly with this topic.

    How can I restore my computer by using ALT + F10?

    How can I restore my computer using eRecovery Management?

    In addition, this is a comprehesive list most of the topics on creating and using the recovery media that can help: Use Acer Recovery Management to restore your system or create recovery media

  • The difficulty to restore my laptop to factory setting.

    I came home one day to find that there was a virus on my HP Pavilion Dv7 - 4009tx Enterainment Notebook PC and since I had important things backed up on my external hard drive I have much better just to restore my laptop back to factory settings, I find the best way to get rid of problems like this. (they rarely anyway).

    So I turned off my phone and then launch it and press F11, the window with three boxes popped up, I already knew what to do but the ability to set my laptop to factory settings was not in the first box where it should be, thinking that I made a mistake I looked on the internet and it said : this is how you do it. Confused out of my mind as to where the option went I tried the three other options available in the "I need help immediately" box and however the laptop has restored back to factory settings, but not completely, programs and software initially provided with the laptop were no where.

    I tired the other method to restore using the Restore Manager, option restore my laptop to factory setting was there to my greatest joy and I clicked it expecting it to be restored, but rather after the restart he come to a window with the restoration of the system and repair the start and a few other options.

    I'm really lost to restore my laptop to its factory originally settings as I had done a few times before. Nobody knows what is happening or what I'm doing wrong. My laptop runs only two years soon which means that it is not that old to have this kind of weird problems and I really need my laptop to do my uni work, I need to fix as soon as I can.

    Hello

    Virus problem has probably corrupted the partition on the computer. In this case, you will be unable to perform a factory reset of the recovery partition.

    You will need to perform a recovery using the HP recovery discs. If you have not created any recovery media after the purchase, you can order online them or directly call the technical assistance for the embedded discs out to you. This operation brings the computer to factory again.

    Here is the link to order online:

    Order of the recovery disc for Windows 7, Vista or XP

  • Satellite A200-17O - how to restore Windows to the factory settings?

    Hello

    I have a Satellite A200-17O. I want to restore Windows Vista to factory settings, I did not need to backup all the files. I don't have the product recovery CD. When I press F8 and click on the "Repair" option, it will give me all the options, but when I click on the option to completely recover the system (the one on the bottom), it will simply open a window telling me to back up my data, then theres a button 'OK', and when I click that, the window will simply close and return to the menu options. All I want is to return Vista to factory settings.

    Thank you for your help.

    Hello

    Yes, normally you can restore your computer laptop initial configuration using disk HARD recovery option. Therefore, you must follow the instructions here:
    http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

    If it doesn't work, you need to use the Toshiba recovery disc. If your computer laptop didn t come with such a recovery disk you create yourself using recovery preinstalled creator tool. This is mentioned in your user manual, have you checked it?

    Therefore, you need a few blank DVDs. I recommend the DVD-R from Verbatim or TDK. Many users here have a good experience with these brands.

    If you have any other questions, just after again! ;)

  • How can I reset my laptop to factory settings

    How can I reset my laptop to factory settings

    Hello

    There are three main ways to restore your laptop to its 'Condition of the factory' - see the document on the corresponding link below.

    Performing a HP System Recovery - Windows 8

    Perform a recovery of the HP system - Windows 7.

    Perform a recovery of the HP - Windows Vista system.

    Perform a recovery of the HP - Windows XP system.

    Kind regards

    DP - K

  • How to restore the computer to factory settings?

    I want to restore my computer back factory settings im tp do not know how to do that please inform me on what I do you solved the problem

    Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

    They will tell you how to do this.

    Every computer manufacturer has their own way of making recovery disk/s.

    Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Save all data, because it will be lost during a clean installation.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/default.aspx/KB/326246

    'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

    See you soon.

    Mick Murphy - Microsoft partner

Maybe you are looking for

  • I have a Firebird database that points to the wrong location

    I have a Firebird database located on place on my machine, it is oriented in the wrong place and I do not know where to configure it so that it points to the location correct errors in events with event ID 33 Viewer then gives the following message F

  • HP Mini 1101 / download of the air?

    Does anyone have this mini (hp 1101-907 with xp pro and have been able to download Itunes?)  Looks like he wants to take almost 20 hours? It has 2 GB and 1.6 GHz.

  • Notepad opens in Code in Vista Home premium

    Notepad opens in the code, how can I set it to itsdefault? or where can I find download Notepad

  • Remove the Division into chapters to DVD convert

    I converted a VHS to a DVD but Windows divided into chapters so it plays correctly with a DVD player.  How can I get rid of the Division into chapters?  It is about 2 hours long and only plays a few seconds on the first, then jumps to the last few mi

  • How to see the values of the attributes of global context?

    Hi friends,There is a context (namespace) in DBA_CONTEXT and DBA_GLOBAL_CONTEXT. But it is not available in SESSION_CONTEXT and ALL_CONTEXT. (It is only on the schema in the instance).The context Type is ACCESSIBLE on a GLOBAL scale. My version of Or