Unable to run windows update error code A 8024, 000

Original title: 8024A 000 error

I replaced my hard drive recently, and after you install the recovery disk, I am unable to run the window update (error code A 8024, 000). I replaced the hard drive of this computer before and used this disc of recovery before and never had this problem, I even tried to reinstall the drive recovery again and the problem persists. I also tried the solution posted on other peoples issues this using prompt command and it turns out unsuccessful. I also tried to install the Windows Update Agent, which is recommended by some, it starts to install and I get an error saying that it is impossible to install PowerShell. If anyone has any alternatives, I try (in addition to those I've already tried) Please help! Thank you for your time.

Advertisement

Hi all.

solution:

Download the new technology Intel® Rapid storage (RAID) driver 11.6.0.1030 version

of http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=21852&ProductFamily=Software+Products&ProductLine=Chipset+Software&ProductProduct=Intel%c2%ae+Rapid+Storage+Technology+ (Intel % c2% ae + RST) & lang = fra and install in "normal" mode.

This works.

The Windows update error code appears after a hard drive replacement, and most providers have only this driver in version 9. XX or 10.xx.

This driver 11 version solves the problem with windows Update error A 8024, 000.

(have this error on 5 different machinetypes (Samsung, HP, Sony Vaio, etc.) and are all now resolved).

Tags: Windows

Similar Questions

  • Pavilion dv6t-2000: Post recover process reimage disk - windows update error code a 8024, 000

    Hello

    After replacing my old HDD with a new SSD, I successfully used my purchased 1 & 2 recovery discs to reload Windows 7 x 64.  Now, I am able to connect to the internet and navigate through Internet Explorer, but I can't get Windows Update to work.  I get this error: Windows Update 8024A 000 error Code.

    I researched and found this fix:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-update/Windows-Update-error-code-8024a00...

    However, after you follow the steps to stop services, rename the specified files, register the dll, and then finally to leave the services, I'm still having the problem.  I also ran a utility "fix" looking for issues with the Windows Update utility, it has been correctly executed and said it solved the problem, but the problem persists.  I get more a 8024, 000 of the error, but the update still does not work.

    I don't him have not yet tried this, because of the weather, but will plan no later than today:

    In safe mode, access c:\windows\ and rename C:\Windows\SoftwareDistribution to SoftwareDistribution.old.
    OK and restart.

    I also tried to upgrade to the latest version of the Windows Update utility which has as well.  I can install other applications (e.g., Norton anti-virus, java, adobe flash player) without problem.

    I noticed that I have not installed ServicePack 1, I did before as I have reimagee my computer. I need to install this first?

    Anyone has any ideas, or did I miss something?

    Your help is appreciated!

    Thanks, Orrin

    I was able to find a solution to this problem.  It is a problem with the HP recovery disk image.  It does not correctly install the Intel Rapid Storage Technology driver.

    To resolve this issue, go here: https://downloadcenter.intel.com/download/20868/RAID-Intel-Rapid-Storage-Technology-Driver-for-Intel-Desktop-Boards

    Download and install the version appropriate for your respective operating system.  As soon as it was installed it fixed my Windows Update doesn't work not, error: 8024a 000

    Thank you

    Orrin

  • Windows update error code A 8024, 000

    can not get updates not yet automatic, manually treid keep getting error code 8024A 000, please help.reply to my email, thank you.

    Please see the Symptoms section of this article in the MS Knowledge Base-

    Based on ESENT and applications that run on a Windows Vista-based or Windows Server 2008 computer may not work properly after the reported physical sector size changes to storage device

    If the failure to initialize the entry of the data store is present in WindowsUpdate.log (error code may differ) How to read the Windowsupdate.log file

    FATAL error: Failed to initialize the data store, error = 0xC8000222

    Or if it will appear in the application event log

    Log name: Application
    Source: ESENT
    Date:
    Event ID: 412
    Task category: registration/recovery
    Level: error
    Keywords: Classic
    User: n/a
    Computer:
    Description:
    c:\windows\system32\wuaueng.dll (936) SUS20ClientDataStore: unable to read the header of logfile C:\Windows\SoftwareDistribution\DataStore\Logs\edb.log. Error-546.

    Then suggest that ask you the fix to resolve the Windows Update service doesn't work.

  • Update Windows Vista error code A 8024, 000

    I just replaced my hard drive due to the old one failed and had to re - install Windows Vista Home Premium on my laptop.

    After the operating system has been installed again, I went to check out the updates and I got error code A 8024, 000.

    I have an Acer Aspire 7720-6569 2 GB of Ram. Intel Core 2 Duo T5450 processor.

    Was from my old hard drive WD Scorpio 160 GB and I replaced it with WD Blue 320.

    I just replaced my hard drive due to the old one failed and had to re - install Windows Vista Home Premium on my laptop.

    After the operating system has been installed again, I went to check out the updates and I got error code A 8024, 000.

    I have an Acer Aspire 7720-6569 2 GB of Ram. Intel Core 2 Duo T5450 processor.

    Was from my old hard drive WD Scorpio 160 GB and I replaced it with WD Blue 320.

    Already answered here... Please take a look

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Vista-update-error-code-8024a000-after/c5f85a66-7418-41de-aa31-208071a9ea85

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/unable-to-perform-Windows-Update-error-code/ccc838fe-21ec-460B-8b0b-6863697a5550

  • Update Windows Vista error code A 8024, 000 after replacing the HARD drive

    Hello

    I had to replace the failed hard drive on my laptop (I replaced it with the same brand and size).

    After that I used the recovery CD, Windows Update gives me error code A 8024, 000.

    I tried the solution provided in this thread, but did not work for me:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-Update-error-code-8024a000/562845f3-78d5-42A0-bed5-e3fd39f01df7?page=1&TM=1337378075490

    I also tried to load the Microsoft Fixit utility, which has not installed, I tried to update the installer but it gave me an error as well. Also the installation of SP2 crashed with an error (8000ffff if I remember correctly)

    Any help is appreciated.

    Thank you.

    Eugen

    Hello

    1. which utility Microsoft Fixit did you tried to load?
    2. what happened when you tried to load the Microsoft Fixit utility?
    3. what was the error message when you try to update the installer?

     
    Method 1: Try running the fix - it of the article mentioned below, if you not him have not yet tried.
    The problem with Microsoft Windows Update is not working:
    http://support.Microsoft.com/mats/windows_update/
    Method 2: run SFC scan. Analysis (sfc) System File Checker will Windows replace corrupted or missing system files on your computer.

    Scan sfc enforcement procedure:
    a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
    b. click on continue or provide administrator credentials if prompted.
    c. in the type in the following command prompt window and press ENTER:

    sfc/scannow
    Refer to this article for more information:
    http://support.Microsoft.com/kb/929833
     
    Method 3:
    0x80000FFFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update:
    http://support.Microsoft.com/kb/946414
    Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    http://support.Microsoft.com/kb/322756/
    Download Windows Vista Service pack from here:
    How to obtain the latest Windows Vista service pack
    http://support.Microsoft.com/kb/935791
  • error when you try to update: "windows has not can find new updates, error code A 8024, 000.

    Original title : I can't update my computer... can anyone help me?

    I use Windows vista ultimate and I get the same message when trying to update-"Windows not can find new updates, error code 8024A 000 can someone help me?"

    See this thread:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-Update-error-code-8024a000/562845f3-78d5-42A0-bed5-e3fd39f01df7

  • Unable to do Windows Update - error code: 800700 1

    Impossible updates updates window for some time.   Was not too concerned until I wanted to load a software application when it refused to load indicated he could not because of a damaged component and set the 1 800700 error code

    Is there any solution for this?   I know that this means that it is a corrupted file.    I have a scanner via CMD and confirmed that smipi.dll in either:

    C:\Windows\winsxs\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990 or

    C:\Windows\winsxs\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.0.6001.180006386_none_095f6148c74a7a64.

    The smipi.dll in the second folder is empty, it is not all the data, but the scan he mentioned.

    Is there any solution for this?

    Note: I don't have a CD of Installation of Vista, the computer did not come with one.   I have a Dell Inspiron 1720.

    Thank you

    Kim

    Compatible with Vista but ending in two weeks from tomorrow, I assume that assistance technicians are overwhelmed right now. Be patient.

    Or you could always...

    Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

    HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

    Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

    4 steps to help protect your new computer before going online
         http://www.Microsoft.com/security/pypc.aspx

    Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

    NB: The free trial Norton which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool Norton before installing updates, Windows Service Packs or IE updates and before installing your new anti-virus application.

    If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

    Good luck!

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Cannot run Windows Update - error code 0 x 80240036

    Just rebuilt my PC with XP sp2 and IE8. When I run the updates I receive the error "the website has encountered a problem and cannot display the page you are trying to display." Error code 0 x 80240036

    > You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update

    http://support.Microsoft.com/kb/883614

    > How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Note: This section, method, or task contains steps that tell you how to modify the registry.

    However, serious problems can occur if you modify the registry incorrectly.

    Therefore, make sure that you proceed with caution.

    For added protection, back up the registry before you edit it.

    Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

    Back up the registry
    http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

    > Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

    http://support.Microsoft.com/kb/906602

  • Cannot run windows update - error code 0 x 80070424

    Can someone help me please.

    If I try the link to the computer or online - any attempt to update gives the same error code: 0 x 80070424.

    I submitted e-mails directly to the microsoft support and unfortunately only been sent in circles.

    I ran the program autoruns and did not notice something significant.

    Advise or better a solution someone please! Thank you very much.

    80070424 the specified service does not exist as an installed service.

    Told you to run this Microsoft Fixit Support? - How to reset the Windows Update components?

    You have performed the update system (aka CheckSUR) tool yet?

    Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

    Don't forget to download and save the output of the tool for your system architecture. If you are not sure what is the architecture of the system, click on the link under method 2: download the update directly system preparation tool from Microsoft Download Center, which says click here to show or hide the instructions step by step with pictures

    Once the download is complete, close all open programs and browsers. Run CheckSUR.
    It will create 2 named and located in logs

    Windows\Logs\CBS\CheckSUR.log
    Windows\Logs\CBS\CheckSUR.persist.log

    If the error still occurs, please send the contents of one of these newspapers.

  • Unable to run Windows update, error: 0 x 80070424

    Original title: Windows update will not work. I receive [error number: 0 x 80070424]. I am running Windows XP, Media Center Edition, Version 2002, Service Pack 3

    Windows Update will not work. I receive [error number: 0 x 80070424]. I am running Windows XP, Media Center Edition, Version 2002, Service Pack 3

    Hello

    1. you receive this error when you install a particular update?

    2. when it changes on the computer prior to this question?

    Perform the following methods and check:

    Method 1:

    Disable the security software on the computer and check.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2:

    See the link, run the Fixit. You can also try other steps provided for in article.

    Error message 0 x 80070424 when you use Microsoft Update or Windows Update Web sites to install updates, or when you start Windows Firewall

    http://support.Microsoft.com/kb/968002

    Note: the above link is also applicable for Windows XP. Ignore method follow the steps in method 2 to 5 troubleshooting 1.

    Registry warning

    Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows

    http://support.Microsoft.com/kb/322756/

    Method 3: If the problem persists, perform the steps mentioned below and check:

    • Click on Start -> run
    • Paste the following command and enter

    % SYSTEMROOT%\SYSTEM32\REGSVR32. EXE, % SYSTEMROOT%\SYSTEM32\WUAUENG. DLL

    Let us know if it helps.

  • Windows updates: error code 80040154

    No updates have been installed successfully in more than a month... What is the problem? Error code: 80040154... using Windows Vista basic

    * Title *.
    My Windows Vista Basic does not accept windows updates: error code 80040154. What is the problem?

    Alan,
    If you have not already opened him a pension case and you still get this error, here are a few things to try.
    Run these tools and see if one of them report errors that cannot be fixed:
    Disk error checking
    System File Checker  
    The system update tool

    If those who invent it own and you still have a problem you can run some virus\malware scan from another source and then your.  Take a look at these links because they have some great info on virus protection:
    Get rid of malware 
    Can I clean an already infected computer?   
    Windows Live OneCare Safety Scanner Windows 7\Vista

    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Update error code 646 & dt000.

    Received the Windows Update error Code 646 & dt000 does not allow the following 2 updates be installed (KB976382 KB981725) what I need to do.

    Sorry, you have problems getting your patches installed. I have a number of things for you to look at.  First of all, yourBackground Intelligent Transfer Services set toAutomaticand started and Windows Update ? They both should be started. You can check these settings by typing services.msc in the search box of the start menu.

    Sometimes in order to get patches to install correctly, you must perform these tasks manually. Click each of the links below and click on download and run.  You must accept the agreement and then click on continue.

    KB976382

    KB981725

    If this does not work, try to run the Microsoft OneCare safety scanner.  Sometimes it will solve problems of hidden registry, or can clear the virus that can prevent the installation of the patches: http://onecare.live.com/site/en-us/center/whatsnew.htm. Click full service scan, and thenQuick scan (full scan takes a long time to complete). Try the patches.

    Barbara

  • Windows Update error code 8E5E0147 when installing KB968930 update

    I have windows vista and when I try to install update KB968930, I get the Windows Update error code 8E5E0147. Nothing seems to fix this error. Any suggestions?

    Hello

    There could be various reasons for the updates to fail. No matter what security software installed on the computer may crash or services related to the programs installed on the computer. Also if there are corruptions in the files\folders related to Windows updates.

    Reset update components would actually try fixing the part of corruption by recreating these files and also to re-register the files necessary .dll (Dynamic Link Library).

    http://support.Microsoft.com/kb/968930

    Some users corrected this problem by resetting the components of windows updates. Try these steps and check the result.

    Temporary disable the firewall/security settings and check if it makes a difference.

    http://support.Microsoft.com/kb/283673

    Do allow him back course so that your computer is protected.

    Method 1: Reset Windows Update components.
    Log on as administrator.
    a. visit http://support.microsoft.com/kb/971058
    b. click Microsoft fix and run successfully.
    c. restart the computer once the tool is run.

     

    Method 2: I recommend you perform the clean boot.

    Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

    See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    For more information, see the following link below:
    http://support.Microsoft.com/kb/2509997

    Hope this information is useful.

  • Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

    Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

    Would you advice, thank you.

    Hi Hugo,.

    1. what anti-virus software you have installed in the computer?

    2. What is the full error message/code?

    3. the issue occurred after you install Minecraft?

    4. are you able to play Minecraft without any problem?

    5. what happens with Antivirus and Java?

    Windows Update can occur if one or more of the following conditions are met:

    1. the Windows Update database is damaged.

    2. antivirus software is configured to scan the %Windir%\SoftwareDistribution folder.

    3. the service (BITS) Background Intelligent Transfer Service does not receive a content link header.

    4. a required system file is incorrectly registered.

    5. Windows Installer has encountered an error.

    6. the manifesto of component maintenance (EC) is damaged.

    7. the Windows Update service has stopped during the installation.

    8. a version of the file conflict exists with Windows Update agent files.

    Please follow the steps described in the methods to solve the problem:

    Method 1: We will try the steps from the following link and check the result:

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058?WA=wsignin1.0

    Method 2:

    To correct the errors that occur when you use Windows Update, install, and run the system update readiness tool. The tool analyzes inconsistencies on your computer and fixes as its current installation.

    You can view the following link to download the system update readiness tool and check:

    System tool update that corrects problems of Windows Update is available for Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

    http://support.Microsoft.com/kb/947821

    Details of the event log to find what caused the Antivirus and Java to fail:

    What are the information contained in the logs of the event (Event Viewer)?

    http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

    Hope that the information provided is useful.

    For any help related to this problem or any question of Windows, you can still display in the Microsoft Community Forum!

  • 66A and 41 d on 2 important Windows Update error codes

    Original title: Windows Update error codes

    Get continually updated "stranded" with error code 66A and 41 d on 2 important Windows updates

    Hi MaxineDonald,

    1. the updates are getting failed with this error code?

    Step 1:

    I suggest you to reset the Windows Update components.

    Access the link below and try the Fix mentioned in the article tool to reset the Windows Update components automatically:

    http://support.Microsoft.com/kb/971058

    Step 2:

    You can also try to download the stand-alone package with updates and try to install.

    a. download updates from the Microsoft download Center:

    http://www.Microsoft.com/downloads/en/default.aspx

    b. Enter the item number in the field search and download the same.

    c. double-click on the downloaded file.

    d. you can either click Run to start the installation or you can click on save and save it on the desktop and run the installation once the update is completely downloaded.

    Hope this information is useful.

Maybe you are looking for