Unable to second monitor installation

Similar Questions

• Installation of the driver software window opens on the second monitor in a dual monitor extended installation of the monitor

  The "Software Installation" window will open on the second monitor in a dual monitor extended installation of the monitor

  I have a dual display setup. A 225WS 1680 x 1050 monitor LG is connected via a VGA cable and a VGA - DVI converter to a DVI port on a Radeon 6850 video card. The second screen is a Samsung HDTV set at 1920 x 1080 and connected via HDMI on the same video card. I have set up the screen LCD as main monitor and the Samsung HDTV as the extended display. HDTV is most of the time, but I use it at least once a day. This isn't a driver problem, because it happened also when I had an old Nvidia video card and it is fixed by a new installation of windows and setting up of screens from a square.

  The installer works great almost all the time except when I try to use some programs or Windows functions (7). When I try to start the MozBackup application or I pop in a new usb device and click on the notification bubble, both these windows (MozBackup and the "Driver software Installation" window) open in the center of the HDTV as opposed to the LCD (which is defined as primary). The problem is that the views are ~ 3 meters out and HDTV is mostly off.

  I sent a bug report to the developer of MozBackup because this part is perhaps a problem with its software or what old Windows functions and hooks it uses, but the window "Installing the driver software" (or who knows what other program Windows Basic) has exactly the same problem and is part of Windows.

  What can I do about it? I DIDN'T put the displays in any mode "clone" to have office in mirror between them. Is - this fixable somehow? I guess that is not a problem with the video card drivers because I used two different video cards with either the manufacturer or windows update drivers and the problem is the same.

  I'm talking about a window similar to this one
   
  http://jaunty-electronics.com/blog/wp-content/uploads/2012/09/Freedom_FRDM-KL25Z_driver_install.PNG

  Try changing the backup.ini

  you find it in

  .. \Program files (x86)\MozBackup\backup.ini

  Open the file backup.ini with editor

  Check if you have the rights to save the changed files in this directory. You may need to change the Directory rights

  Change the value of "1": monitor

  wyzodir =

  ; Monitor: the monitor number where MozBackup window will appear

  monitor =1

  '2' or whatever the value of your primary monitor is:

  wyzodir =

  ; Monitor: the monitor number where MozBackup window will appear

  monitor =2

  System main screen could be identified as '1 '. If you have changed the monitors, it can be used internally '2 '.

• Envy touchsmart 15t j100 - unable to connect to second monitor

  Hi, my problem is that, for some reason, my desire to hp cannot detect the external monitor. I tried to re - install the graphics drivers (hd 4600 / Geforce 740 m) and I tried to read and search sulutions in line but nothing helepd.

  It used to work and suddenly collapsed. any help? My only assumption is that the HDMI itself does not work.

  Thank you, Ron.

  Thank you for your answer!

  So finally, problem solved!  I found that when I disable the HD 4600 driver and only allow it, for some reason, that it works and my computer detects the second monitor, if I restart my computer or unplug the HDMI cable I have to toggle thing again... but at least it works!

  

• The second monitor connected to the Satellite Pro A100 "disconnect" himself

  Hello

  I use my laptop - Satellite Pro A100 (PSAACE) - with a second monitor with no problems until I did an upgrade to Windows Vista. After installation, the second monitor starts to show problems, i.e. that works intermittedly. Every 5 seconds or so the monitor "unplug" itelf and caps again. I hear the (UN) plug sound when she did this and the two displays flickers during this period.

  Can someone suggest a solution to this problem?

  Concerning

  I put t know what can be the problem but it sounds like the connection problem. Make sure that the monitor is connected correctly. Also try to test it with another external monitor. Is perhaps the cable or connector defective.

• Second monitor is not detected after upgrade to Windows 10

  After you have installed Windows 10 upgrade Windows 7, my second monitor is no longer functional. The computer is an HP Touch Smart 610-1065qd. I connect on the second monitor through a USB 2.0 Port Replicator 2005pr HP. The Replicator appears as a drive when you look at this PC and an arbitrator in him like HP USB DOCK, as it did in Windows 7. The Replicator seems to work, I can't access the SSD on the device and use a wireless mouse. The receiver is connected to the port replicator. The second monitor, also connected to the Replicator, as it was before the upgrade. Now the system is unable to detect this monitor. The MANAGER of peripheral DEVICES, MONITORS, indicates there is a monitor Active, listed as "PnP monitor" generic Device Manager displays a second monitor as a hidden device. Identified as a "generic PnP monitor' and the State of the device is"currently, this hardware device is not connected to the computer. (Code 45) ». In Windows 7, I don't remember the second monitor listing. USB and the DISPLAY NETWORK DEVICES, the entry is USB PORTS port REPLICATOR 2.0 HP 2005pr. Under GRAPHICS cards, there are two lists. The first is an adapter named "AMD Mobility Radeon HD 5570". This corresponds to my video card. The second adapter named "glance speed Boost. I believe that Ancestry.com can installed this. "This device is working properly" is the condition for both cards. I manually checked new drivers for all components. There is no effect. Then, I went to HP and downloaded the most recent Setup to monitor. I then tried to load the drivers and monitoring software. I also loaded the screen in compatibility mode, then in compatibility mode for Windows XP SP3, then compatibility for Windows 7 and finely mode as a regulator. As a result, I tried the same process with the original disc. After each test, I rebooted the system. Still unable to detect the second monitor, nothing in Device Manager and unable to detect a new monitor on screen. I attempt to change the Projection. He also, had no effect on the display. Then, I deleted graphics cards. First of all, the adapter "AMD Mobility Radeon HD 5570", which corresponds to my video card. Second, the "Speed Boost glance. This also, don't give not any what on second monitor display. Even if it is visible only when show it hidden devices is checked. Any suggestions will be appreciated.

  I finely found a fix for the problem to my question; Second monitor, not detected after upgrade to Windows 10. Not the one I was hoping. It turns out that the fault was with the HP 2005pr USB 2.0 Port Replicator. It seems that the driver may be at fault. After more than a month of waiting, I decided to replace the duplicator. I decided to buy a Port adapter to replace the duplicator. What is much less expensive experiment and see if it was infecting the duplicator. It turned out that my second monitor is back and healthy. I decided to continue to use the port adapter and buy a USB Hub to replace this part of the duplicator. I no longer use the HD Audio output, after replacing the old speakers with Bose USB speakers some time ago. I thank everyone for help.

• How can I get windows appears on the second monitor?

  Windows does not detect the second monitor.  Unable to access options to the mirror of the main screen.  Second montor is connected, but is only the display wallpaper.

  Hello

  1. How did the second monitor connected to the computer?

  I suggest you try the steps from the link below and check if it helps.

  Solving the multiple monitor problems: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-multiple-monitor-problems

  Understand multiple monitors: http://windows.microsoft.com/en-US/windows-vista/Understanding-multiple-monitors

  Set up multiple monitors: http://windows.microsoft.com/en-US/windows-vista/Set-up-multiple-monitors

  Hope this information is useful.

• Second monitor detects no signal

  HI -.

  I have a HP Pavilion p6130y Desktop PC with an updated graphics card (AMD Radeon HD 7700 Series).

  I have already beautifully executed 2 monitors:

  HP Pavilion 25bw via HDMI

  HP 2311 x via DVI

  We moved homes a few days ago, and when I updated backup (only 5 minutes), the second monitor is unable to detect a signal from the computer.  I tried closing down and reboot nothing helps.

  Please help as I can not funtion without extended desktop!

  JB

  HA!  Never mind... I just realized that I had the 2nd monitor plugged into the input dvi PC and not the graphics card.  Duh...

  Everything is good again :-))

• Windows 7 Home Premium 32-bit OS is unable to complete the installation.

  Windows 7 Home Premium 32-bit OS is unable to complete the installation.

  I have a Dell Inspiron 530 of 2007 which came with Vista and has been updated 2 years later at 7 w. I had to reinstall 7 W... 3 or 4 times since 2010. I guess that my machine can't handle W7 very well.
   
  My current problem started with a BSOD problem. After trying some suggestions Internet on how to solve this BSOD problem that did not work, including repair of Windows, I did a data back up mode without failure and then decide to reinstall Windows 7 from the MS CD. My level of understanding is limited, but as noted, I've done this before with success. What I didn't understand is there seems to be another unsolved problem which does not allow the complete reinstallation of windows.
   
  I did a clean install, then a formatting and in both cases, W7 could not complete the installation. It progresses to the final stage of "complete installation" and then there is a second error message 1 that I can't read... "" a problem has been detected... close... "."  It seems to be a reboot loop.
   
  I have since read that the original BSOD problem and the 'detected problem' could also well be linked to the display driver. And this driver it must be disabled before performing a Windows installation. But I'm not able to access Safe Mode or the control panel to turn it off. If this driver is the problem, is there another way to turn it off?
   
  Or are there any other suggestions on how to complete the installation of the operating system?
   
  Thank you.

  I see that you have posted on the Dell desktop Forums and Robert (rdunnill) gave you a suggestion. He is the expert forum on upgrade/repair of equipment in Dell desktop computers:

  http://en.community.Dell.com/support-forums/desktop/f/3515/t/19632098

• My computer does not detect the second monitor

  I just bought another monitor for my PC. My first monitor is plugged into one of the two VGA connectors at the back of the computer, and my second monitor is plugged into the second slot VGA. However, when I try to detect the second monitor does not work, and he thinks that a monitor is connected. Thanks for any help!

  Hello

  Power Off the Computer and then plug in the monitor.

  How to set up dual monitors in Windows 7
  http://www.online-tech-tips.com/Windows-7/How-to-Setup-dual-monitors-in-Windows-7/

  Two screens are better than one
  http://www.Microsoft.com/athome/organization/twomonitors.aspx

  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

  Tutorial: How to set up two monitors (Windows) - video
  http://www.YouTube.com/watch?v=YFCpaAs5s3c

  How to set up multiple monitors
  http://www.PCWorld.com/article/157672/how_to_set_up_multiple_monitors.html

  ==================================

  You may need to update your display and video driver

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded: run DriverView - define the VIEW
  for the drivers Microsoft hide - updated those without drain in their names. (Also updated
  the BIOS and chipset drivers.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it) and
  Then, get new ones manually if you wish.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Why can't drag the DVDplay to my second monitor (TV screen)?

  I can drag all other programs (excel, TurboTax, internet explorer, etc.) to my 2nd monitor by double clicking in the upper part of the screen of the program open and then by dragging with the mouse.  But not the DVDplay (in Media Center). I want to watch the DVD on my TV while working on my laptop.  My second monitor is actually a Samsung 22 "LED TV.

  I could drag the media player, but the DVD plays in media player... He kept bufferingand does not display the entire screen at the same time.  The DVD plays well in DVDplay, but can't get it on the 2nd monitor.

  Hello

  Thanks for posting your question in the Microsoft Community.

  The description of the problem, it seems that you are unable to play a DVD on Windows Media Player in the 2^nd monitor.

  I imagine the inconvenience that you are experiencing. I will try to help you in the matter of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. you receive an error code or message?

  2. What is the format of the video file you are trying to play?

  3. have you made any recent hardware or exchange of software on your computer before this problem?

  4. What is the version of your Windows Media Player?

  Please follow the methods and mark the question below:

  Method 1:

  I suggest you to download and install the plug-ins and Add-ons to Windows Media Player on the link below and check.

  Plug-ins and Add-ons for Windows Media Player:

  http://Windows.Microsoft.com/en-us/Windows/Windows-Media-Player-plug-ins

  Method 2:

   

  Follow the steps in the link below.

   

  Play an audio or video file: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/play-an-audio-or-video-file-frequently-asked-questions

   

  Method 3:

   

  Install the latest codec from the link below:

  Codecs: Frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

   

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

   

  For reference:

   

  Information on the types of media files that supports Windows Media Player:

  http://support.Microsoft.com/kb/316992?WA=wsignin1.0

   

   

  I hope the above information helps you and your response is very important for us to ensure a proper resolution.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

• Windows 8 will not recognize my second monitor

  After the upgrade to Windows 8, the computer does not recognize my second monitor. Disconnect and reconnect the device after it remains unknown. I am running a Dell Inspiron all in one office. Do I need to install a driver so that he will recognize the secondary monitor? If so, which?

  Access

  Control Panel\All Control Panel Items\Display\Screen resolution

  and make sure that both monitors are indicated and "Extend desktop to this display" is selected for each monitor.

  If both monitors are not displayed, try clicking on "Detect".

  ==================

  Check Device Manager to see if the card video cards (if you use more than one) and both screens are indicated in the list of devices.

  Tom Ferguson

  Later:

  Try to go to the Dell website, enter your service number (usually located on a label on the back of the case) or the installation allows to detect the pattern.

  http://support.Dell.com/support/index.aspx?c=us&CS=19&l=en&s=DHS& ~ CK = mn & ~ ck = mn

  See if there are files on your computer for Windows 8.

  ==================

  Another option is to use a USB to VGA or USB key to video DVI 'card', according to which will accommodate the Dell) has no Windows 8 pilots. For example. I use a unit of IOGear (USB to DVI). After starting Windows 8 Pro, it was detected and drivers automatically downloaded and installed for it.

  TF

• Not able to connect the second monitor

  Original title: Second monitor visible only on the first plugin

  Implementation:

  New (Nov 2014) Lenovo PC

  AMD A8 H535

  Windows 8.1

  AMD Radeon HD D 7560 w / VGA output and an HDMI output

  Two HP w1907 monitors (resolution is identical on both screens - when they work together)

  Question:

  Last night I plugged my second monitor to the HDMI output with an HDMI adapter / VGA of the Amazon ( adapter ), plug the monitor into it has not come and via the control panel (I tried both via the control panel and some change PC settings) could not detect the second monitor. Then, I went to the HP website and downloaded the drivers, but to no avail. Then I reached down and unplugged the second monitor and resettled to make sure that there is a link, this solved the problem. The monitor came and no further investigation was necessary. However, this morning I woke up the computer to a single monitor and still unable to detect the second monitor. Only when I unplugged and re-inserted the link it works.

  I'm at the end of my rope and need help with this, thanks in advance for any help you can provide.

  Hello

   
  I understand that you are not able to connect the second monitor to the computer. This problem may occur because of outdated or damaged display card drivers.
   
  So I suggest to follow the steps mentioned below and check if help them.
   
  Method 1
  Please check the steps mentioned in the link below to check that everything has been done correctly to connect the second monitor.
  Plug a second monitor or projector
  http://Windows.Microsoft.com/en-in/Windows-8/how-connect-multiple-monitors

  Method 2

  Install all Windows updates and check if it solves the problem. You can check the below link to do.
  Windows Update: frequently asked Questions
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ
   
  If problem still persists, go to method 3.
  Method 3
  Uninstall and reinstall the display driver and check if it helps. First download the display driver and save it to the computer. You can download the latest driver to display from the link below.
  http://support.AMD.com/en-us/download

  Uninstall the display driver, then reinstall it. Follow the steps
  mentioned below to uninstall:
  1. press Windows + R, type devmgmt.msc , and then click ok.
  2. now, find and click with the right button on the display driver and click Uninstall.

  Also install the catalyst for AMD. You can download it from the link below. http://support.AMD.com/en-us/download/desktop?OS=Windows%208.1%20-%2064

  Hope this information helps. Please get back to us if you need further assistance.

• EliteBook 840 G1 and 2013 UltraSlim Dock with dual only monitors Windows 8.1 no second monitor

  My company recently purchased HP EliteBook 840 G1 laptops with discrete graphics.  Alongside this, we use the Dock UltraSlim 2013 with dual monitors HP LV2311 connected using HP DisplayPort / DVI adapters.

  8.1 Windows displays only a single monitor, that the second monitor is not available.  I can try to cover both monitors for a resolution fo 3840 x 1080, but when I try to do just the display reverts to the poster in mirror.

  I can use the DisplayPort on the side of my laptop and just a single DisplayPort on the platform and the OS will see both monitors.

  Please advise, it is unnecessary to have a dock with double DisplayPorts which cannot display two monitors with them.

  Yes the problem really existed with the original HP driver and that Microsoft installs by default.  HP released a newer driver for 8.1.

• bug report: warning dialog always appears on the second monitor.

  This applies to Adobe Illustrator CC 2015 (version 19.2.0). I already presented my bug report to Adobe. Here is what happens...

  Steps to reproduce the bug:

  1. cut the 'Application Framework'. Rearrange the palettes, and then create a new workspace. Quit and restart the Illustrator application.

  2. start a new document and draw something on it. Then close the document without saving it.

  3. a warning dialog expected pop up and say "blah blah blah...". If you do not save, your changes will be lost. »

  Results:

  Here is where is the bug: the pop-up warning will still appear on the second monitor, not on the main screen. This same bug also appears when the embedded image of Photoshop is changed and a popup will ask if you want to update. new pop up appears on the second monitor only rather than on the main screen. I even tried to go back to the main screen, the following warnings are always appear on the second monitor. I even changed my monitors autour by reversing the display ports and the problem persists.

  If anyone has a solution to this, would be great and I thank you ahead of time.

  Here's the dialogue windows always appear on the second monitor.

  
  

  I just upgraded to the latest version of Illustrator CC (2015.3.0 Release;) Version 20.0.0). The dialogue-box-appearing-on-secound-monitor question goes. You need to restart your Mac after installation before it takes effect.

• Proper placement of the Image on the Second monitor

  

  I used a setup two monitor for awhile. 

  Recently I replaced my 19 inch right hand with a 24 monitor monitor inches. 

  Now that I extend Photoshop CC 2015 on the second monitor, the extended section is not in line with the section base. In other words, the upper part of the extended section is 2 inches below the base section; and the bottom of the extended section is the bottom of the screen. 

  My system is Windows 7 64-bit with a videocard GeForce 660

  Any suggestions on how I could fix this problem? In the display on the right hand monitor is set to full screen, the image appears correctly. I tried to use OSD of the monitor to change the location of the image, but this seems to be unable to solve this problem. 

  Above is a picture of the problem.  On the left is PS CC 2015; on the right is the extension of Photoshop.

  Right click on the desktop and choose screen resolution. Select the second screen and drag by the amount of that compensation is.  It's something that I discovered completely by accident during the addition of a third screen (Cintiq Companion 2).  You can drag above or below, left, or right and refine the position.  It's a trick, but I'm not quite sure if it's purely Windows code, or integrated in the video drivers (nVidia in my case)