Unable to set DF Profi II as a master - slave Auto SUR?

Similar Questions

• HP Envy 7640: Unable to set the scanning resolution

  Have been unable to set the resolution of scan during the scanning of the glass in a computer file (pdf, jpg). Guide the user to the HP page 47 7640 said: "● If you want to adjust the size of the scan, output type, scan resolution, or file type and so on, start scan from the software of the printer."
  ● To avoid all scanned text wrong or missing, make sure that the brightness is set properly the
  software.
  ● If you want to scan a document with several pages in a single file instead of several files, run it
  Scanner with the software of the printer instead of the sweep of the screen of the printer".

  First of all, where is the "printer software" to start the scan?

  Have tried all this. When I opened the series HP Envy 7640 (network): Assistant of HP printer, I click on "Scan the Document or Photo a" place in the scanning area. No scan dialog box never opens. Actually I tried to reinstall the printer driver. No change. Always impossible to get a scan dialog box. In addition, when I go in the start menu and the title of the series 7600 HP: HP envy, I click on the HP Scan icon. After a long wait, a dialog box appears that says: "Cannot communicate with Scanner", and it offers a few options. The first is to activate the device (printer), and then on; the second, control cables (its wireless operation); the third: try the software "fix." Happy to report that after stopping then on and running assistant printer again, this time by pressing the "scan a Photo Document' results in the appearance of a dialog box to make the changes that I've been looking for.

• Unable to set server 2012 without the protocol driver LLDP Microsoft network adapter. I have searched the driver but had no chance. My question is where is it located on the CD-ROM of the 2012 Server

  Unable to set server 2012 without the protocol driver LLDP Microsoft network adapter. I have searched the driver but had no chance. My question is where is it located on the CD-ROM of the 2012 Server? I use the version standard edition. Thanks for any advice.

  Thank you all.

  John Hayes

  Hello

  The question you posted would be better supported in the TechNet Forums. I suggest you to ask your question in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/categories/

  Thank you

• Server Windows 2008 R2 Standard - TrustedInstaller owner of C:\ Drive - unable to set new owner

  I have a new Windows 2008 R2 Standard Server.  The original question started with W32Time won't start do not, but I think that it comes to this issue.  When I look at the 'owner' of the C:\ drive it shows "TrustedInstaller" as long as the current owner.  When I try to replace the owner of the server administrator account, I get this error:

  Unable to set new owner the disk Local (c).  Access is denied.

  Any ideas?

  Hello, Chris Prerno,.

  Microsoft Answers is for consumer issues on Windows XP, Windows Vista, Windows 7 and Windows 8 Preview Release. As you question deals with Windows Server 2008, there is a specific forum for this OS on TechNet.

  Please click on the link below and repost your question.
  http://social.technet.Microsoft.com/forums/en-us/winserverGP/threads

  Thank you

• NO Audio: its stopped at night seems to be still unable to set device driver problem

  NO Audio: its stopped at night seems to be a problem of device driver, I can see the triangle of error w/yellow icon still unable to fix it please help

  There is no sound in any part laptop have only checked all devices, there is a device with a sign of error, still unable to set device driver or installation/change/do anything necessary for that driver of device/question - I seeks good at it don't know even know what this driver particular East-cant detect a name he didn't y no info re : change of name/install/dates, not really sure if she was there before-said msg also problem with dvd rom which seems to be related to this driver i don't have not installed/added the other cr discs only those who are in the laptop that doesn't work properly in playback of CD etc. - everything was beautiful 6/7-the next day after what seems like overnight or Pluss of updates etc. , something that's happened and cause a Legion of erros that I knew not until I went to play the audio and no sound - under display devices I see all the icons fax printers etc. on the laptop with my name icon, it has this error yellow triangle-i tried everything myself as well as all assistance web/pc I could find all recongnizes wht he is still unable to fix/solution... more than 20 years and this never happened before all its volumn etc is active and running it is certainly only one device - please help me I need to have sound for audio files and business that I must lead on this as soon as possible, thank you

  Hello

  ·         What version of the operating system is installed on the computer?

  ·         You get the error message?

  ·         Did you do changes on the laptop before the show?

  Follow the steps in the article.

  Tips for solving common audio problems

  No sound in Windows

  For reference:

  Sound cards: frequently asked questions

• I am unable to access the Windows XP updates and unable to set up the automatic update. I have not given an error code. I was only told I can't perform these functions.

  I am unable to access the Windows XP updates and unable to set up the automatic update.  I have not given an error code.  I was only told I can't perform these functions.  I don't have the windows disk that the computer came preloaded with Windows and I don't remember the Administor password I created 5 years ago.  Can anyone help?

  Assume that:

  http://support.Microsoft.com/kb/316524

  You receive an error message 'Administrators' only when you try to visit the Windows Update Web site or the Microsoft Update Web site

  http://support.Microsoft.com/kb/189126

  Microsoft's strategy concerning lost or forgotten passwords

  What I can offer: http://support.microsoft.com/kb/321305

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

• Unable to set the transparency of the taskbar to laptop with windows 7.

  Original title: Please read my problem and give a solution as soon as possible.

  HII all... I'm unable to set the transparency of a taskbar for laptop with windows7 operating system? He demonstrated a tab to find out "trouble shoot problem and sero effects transparency" and shortly after clicking the laptop turns on the screen several times...

  Hi Mary,

  We need additional information to help you with the problem of transparency, please answer the following.

  1. which antivirus app do you use?

  2. do you use wired or wireless Internet?

  3. What is the brand and model of the computer?

  If the graphics card and driver were installed after that Windows 7 was first set up, depending on the manufacturer, you may need to update the computer performance index, which will automatically enable Aero. I suggest update you the display update driver and check the status of the issue.

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the problem still exists; Keep the computer in a clean boot, run the Aero Troubleshooter and check the status of the issue.

  Guided Help: the problems of Aero in Windows 7.

  http://support.Microsoft.com/kb/976170?WA=wsignin1.0

  I hope this helps.

• Error when you try to set the Parental control 'Unable to set settings for administrators user or unknown users.

  I am trying to set up Parental controls for the user account of my son and I get the following error: error when you try to set the Parental control 'Unable to set settings for administrators user or unknown users.

  I tried to use the administrator account.

  When I ran the System File Check sfc/scannow

  TI completed indicating certain files may be damaged and cannot be repaired and check the convertible bonds. LOG file.

  How can I know which files are corrupted.

  Any other Suggestions on how to fix this user profile?  Do I have a profile that I don't know?

  Hi wimuggss,
   
  Step 1: Disable UAC (User Account Control) and check the result
  See How can I change the behavior of user account control by using the cursor?
  Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.
   
  Important: Enable UAC after you complete the steps.
   
  Step 2: If the problem persists, try to set the parental control in safe mode and check the result. If you are able to apply settings in safe mode, this means that some program is causing this problem, mainly the security software.
  See Start your computer in safe mode
  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to set usage, only allowed 1%. When you click OK ' could not ask for the parameters for the reason next 0x8007007b '.

  Windows 7 Home Premium (64-bit) Service Pack one.  Unable to set usage, only allowed 1%. When you click OK or apply. Get error message» Could not apply the settings for the following reason: the syntax of label file name, directory or volume is incorrect (0x8007007b).

  Original title: System Restore

  Hello

  You did changes to the computer, before the show?

  The error 0x8007007B occurs when the system is configured to store the restore on a wrong path or location points

  Follow these steps and check.

  a. click Start, type sysdm.cpl and press enter.

  b. click on the System Protection tab.

  c. automatic restore points, deselect any location invalid or duplicate.

  d. click on check the C: drive with the Windows Logo.

  e. click apply , and then click on Ok.

• Unable to set the ip address of network client hosted after the creation of WIFI hotspot.

  Original title: PROBLEM CONNECTING WITH MY LAPTOP WIFI HOTSPOT INTERNET

  Hi all

  I am able to use the Internet to my hotspot of the Tower, when the source of the internet is Public or private wifi.

  so I know the cmd commands of window for hotspot and the client settings (sharing of customer hosted network, address assignment IP etc.,)

  but the problem I am facing is slightly different

  I use my datacard to cdma wireless broadband as my source internet connection(Reliance netconnect +)

  When I try to create for this hotspot, as usual I am able to create the hotspot and be able to share the internet for hostednework customer.

  but I am unable to set the ip address for the network hosted client, if I try to put 192.169.137.1 and 255.255.255.0 ip

  as soon as I close the window, the IP also disappears

  When connect my android phone to this hotspot, it is able to connect, but there is no internet connectivity.

  When I check the client for transmission of package hostednetwork every two envoys and received packet is past, I mean transmitting

  So what caused the rupture in internet connectivity but success hotspot connectivity?

  check the screenshots...

  can u help me...

  It's a bit complicated

  

  

  

  

  Hi Daniel,.

  Advanced networking issues are supported in the TechNet Forums. I suggest you send the request in the TechNet community.
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w8itpronetworking

  Hope this information helps.

• Unable to set vROPS on AV 3.0

  Unable to set vrops on av 3.0-

  • new installation
  • connected to the console and ran /etc/wemi/utils/disable_ssl_validation.sh
  • restarted
  • AD bind configuration step, the roles and permissions
  • input domain name COMPLETE for device vrops, AD, user name with permissions admin and password

  This error occurs: internal server error. Server has encountered an internal error and could not respond to your request. Please try again later. If this problem persists, contact your service provider.

  Nothing relevant is reported in the newspapers. Anyone experience this problem?

  Apparently he doesn't like not my FULL domain name while it is able to ping in the console of AVM with domain FULL of the vrops device. Jobs using https://VROPS_IP_ADDRESS or https://VROPS_HOSTNAME

• Unable to set up the transaction manager

  I'm unable to set up the transaction manager. I am using weblogic.
  
  I created component TransactionManager and placed it to atg/dynamo/service/transaction. This is what I did.
  #/ atg/dynamo/service/transaction/TransactionManager
  $class = atg.nucleus.StaticMethodReference
  staticMethodName = weblogic.transaction.TxHelper.getTransactionManager
  
  I am getting error on next console:
  atg.dtm.TransactionDemarcationException: the transactionManager has not been specified in the call to begin(). Delimitation of the transaction fails.
  
  getTransactionManager() is null begin the method of TransactionDemarcation:
  
  TD. Begin (getTransactionManager (), 3);
  
  I tried with mysql and oracle, that the two databases.
  
  Any help?
  
  Thanks in advance,

  I have it. It was a stupid mistake. Instead of getting the component via the name of will that I tried to get OOTB component by using the new operator, so in order to subject current OOTB, Manager of transactions was been set to null values.

  Sorry Shaik, my bad!

  Appreciate the answers!

• Illustrator - "unable to set a maximum number of files to open.

  HI - downloaded & installed the trial version of Adobe Illustrator CS6 on my Mac 10.6.8 but can't open it - get the error message "failed to set the maximum number of files to open?

  Error at launch. Unable to set the maximum number of files... | CS6 | Mac OS

  Mylenium

• CS6 "Unable to set a maximum number of files to open." YET.

  CS6 "Unable to set a maximum number of files to open." Just got the whole production and everything installed on my Mac, everything works fine to illustrator who only works very well on one not at all on the other. I tried everything I found on the forums here to my knowledge and without success. I just spent 2 hours on call on hold with adobe support and no one picked up. Extremely frustrated, any help would be greatly appreciated.

  Hey eldriario-

  I just fell on it myself. I ran this doc to help adobe (link below) shell script once, quit Illustrator, repaired permissions, rebooted and was then able to start normally.

  Mind you, I would not the least bit surprised if the error returns again tomorrow, but for now it seems to work.

  Good luck and hope this helps.

  http://helpx.Adobe.com/Illustrator/KB/unable-set-maximum-number-files1.html

• ORA-19510: unable to set the size of the blocks of file ' ' (blocksize =)

  I checked archivelog dest everything ok, power logs archived bit time, everything ok, I wondered what could cause this and how to solve this problem permanently.
  
  
  Log queue alerts
  Fri Jul 31 06:10:08 2009
  Errors in the /oracle/admin/gdwp/bdump/gdwp_arc0_1220702.trc file:
  ORA-19510: unable to set the size of the blocks of 74905 for the file ' / archive/gdwp/gdwp_1_18207_654896926.arc ' (blocksize = 512)
  ORA-27037: unable to get file status
  IBM AIX RISC System/6000 error: 2: no such file or directory
  Additional information: 9
  Fri Jul 31 06:10:08 2009
  Errors in the /oracle/admin/gdwp/bdump/gdwp_arc0_1220702.trc file:
  ORA-19510: unable to set the size of the blocks of 74905 for the file ' / archive/gdwp/gdwp_1_18207_654896926.arc ' (blocksize = 512)
  ORA-27037: unable to get file status
  IBM AIX RISC System/6000 error: 2: no such file or directory
  Additional information: 9
  Fri Jul 31 06:10:08 2009
  Arc0: Error 19510 closing log file archive ' / archive/gdwp/gdwp_1_18207_654896926.arc'
  ARCH: Stopped archiving, error occurred. Will continue to retry
  Fri Jul 31 06:10:08 2009
  ORACLE Instance gdwp - archive error
  Fri Jul 31 06:10:08 2009
  ORA-16038: log 1 # 18207 sequence can be archived
  ORA-19510: unable to set the size of the blocks of file ' ' (blocksize =)
  ORA-00312: thread 1 1 online journal: ' / db01/oradata/gdwp/redo01.log'
  Fri Jul 31 06:10:08 2009
  Errors in the /oracle/admin/gdwp/bdump/gdwp_arc0_1220702.trc file:
  ORA-16038: log 1 # 18207 sequence can be archived
  ORA-19510: unable to set the size of the blocks of file ' ' (blocksize =)
  ORA-00312: thread 1 1 online journal: ' / db01/oradata/gdwp/redo01.log'
  Fri Jul 31 06:10:11 2009
  ARCH: Stopped archiving, error occurred. Will continue to retry
  Fri Jul 31 06:10:11 2009
  ORACLE Instance gdwp - archive error
  Fri Jul 31 06:10:11 2009
  ORA-16014: log 1 sequence # 18207 not archived, no available destinations

  DBA2008 wrote:
  Notes 560204.1 suggest that to get rid of the generation of the trace file, is - it safe?

  I won't read the note at the moment but would surely say they told you to check the destination where the files are current. Did you do that? Raise a SR with OSS, to get their approval before doing something like what you try. Its you only who would face consequences, good or bad, no one else so better take a safe approach and the first approval of OSS.

  HTH
  Aman...