Unable to set the resolution of the screen for an external monitor

Similar Questions

• Tecra M7: Unable to set the screen resolution to 1680 x 1050 on external screen

  I have a M7 and a 1680 x 1050 VX2025 viewsonic monitor.
  I can't set the resolution for external display in clone mode or dual mode.
  Infact I can not get any resolution of the screen to exit the M7.

  I tried this in Windows XP and Vista with drivers from the toshiba Web site.

  Any ideas on how to force this resolution?

  Thank you

  Hello

  Are you sure that the graphics card supports this high resolution!
  If all goes well it s not a material limitation

  But especially if the display resolution is not available the graphics card driver does not support this resolution of the screen.
  In this case only the new driver installation and usage help

  What graphics card is installed on your laptop? Graphic chip Intel?
  If you use an Intel graphics card, then I recommend to visit the Intel page and search for a compatible driver on this page. Some users here in the forum said that the Intel drivers could help choose the preferred resolution.

• DeskJet 3632: unable to set the printer for the moment of ink

  I recently bought this printer, but finds it difficult to sign up for the instant the ink plan. The printer is connected to the pc via the usb cable because my router is not active wifi. Nothing happened when I tried to sign up for the plan, but I had a message on the screen saying if you are not using wifi the printer can be connected to the router with an ethernet cable, there is however no installation on the printer to connect it like that! Does that mean I cannot get instant ink or y at - it another way to do it?

  Hi @Tigermouse.

  Welcome to the Forums of HP's Support. I understand that you try to register your DeskJet 3632 to instant ink.

  The following was taken directly form Instant ink Web Site. What are the conditions to register?

  Your printer must be connected to the Internet, so we know when to send you ink.

  According to the Specifications of the printer (as you noted) the 3632 does not support an Ethernet connection. This means that the printer must be on a wireless network in order to be enrolled in the program.  There is no way around this requirement.

  Let me know if that answers your question. If it did, that's great! Give us some reinforcements by pressing buttons of solution and laurels, that we will help and others see that we have the answers!

• Unable to set the Alias for the current directory (ACD)

  I am creating an alias of CDA who is also required to define the command ' * DBGOUTFILE *'
  "file" argument
  
  I am running following commands
  
  -& gt; DBGOUTFILE "abc.txt".
  ERROR: The current directory (ORA-36780) Alias is not defined. Cannot complete abc.txt.
  I went ahead and tried to set the ADC using the command
  
  -& gt; CDA ' / slot/ems2656/oracle/db/tech_st/11.1.0/admin/pz1ms206_rws60126rems/diag/rdbms/pz1ms206/pz1ms206/trace'
  ERROR: Slot/ems2656/oracle/db/tech_st/11.1.0/admin/pz1ms206_rws60126rems/diag/rdbms/pz1ms206/pz1ms206/trace (ORA-36784) is a directory name or filename not valid.
  
  In which *'/slot/ems2656/oracle/db/tech_st/11.1.0/admin/pz1ms206_rws60126rems/diag/rdbms/pz1ms206/pz1ms206/trace'* track of directory
  
  No idea how to define CDA (which should be the given alias?)
  
  Thanks in advance for the help
  
  Thank you
  
  Joseph George
  
  
  
  

  Hi Joseph,.

  You must first create a directory.
  SQL > create directory

  as '';
  SQL > grant all the Directory public /;

  Now, you must run the command ADB but make sure that the patch has permission 777 for all folders.

  Thank you
  Brijesh

• Windows jump out of the screen and an external monitor

  I have an external monitor connected to my MacBook Air.  When I turn off the external monitor (MacBook cover is already closed at that time) and return hours later to turn on the monitor, I find most of my windows have been dispersed (jumped) off the screen.  It occurs on multiple applications: terminal, iMail, browser Chrome, Preview, etc...  I usually find the window peeking out of the side of the screen - a small shard of window - and I have to drag it to the center of the screen.  I have to do for almost all windows (again not all windows to do this).  Its very annoying.  Any ideas on what is the cause?

  I am running v10.11.1 El Capitan (B 15, 42) on MacBook Air (13 inch, mid 2013).  External monitor is Dell.

  I forgot to mention.  It happens all of a sudden... eventually after the upgrade to El Capitan?  (but I am not sure).

  He used to do this permanently on Yosemite.

• set the screen for window module raw?

  Hello

  I'm working on two screens on a Mac Pro 4.1 running el capitan and photoshop cc 2014. The largest of these screens is defined as primary in the system preferences (menu bar, display > arrangement). I would have preferred to keep it, especially because if the value in the contrary case, the second - a calibrated eizo - screen seems to lose its calibration when set as main screen.

  Now, lately and for reasons I can't understand, photoshop has decided that the raw dialogue window should fill the main screen. Is there a way to make it otherwise?

  Thank you

  C

  I can't speak for the management of screen in OS X. But when you say the Eizo 'loses its calibration' when set as primary, which seems to be another variety of a reported problem.

  In fact he loses no calibration, which is stored in the form itself, but what happens is that the incorrect monitor profile is used by Photoshop. And Photoshop uses to turn the profile that the OS indicates to use for this view.

  There was also a very curious recent cases where the device altered calibration, to modify the output of the video card, even after a reset full video card. Bootcamped in Windows it is not happened. This case was unresolved IIRC.

  It is therefore most likely a bug in the OS X.

• Unable to set the software for my MP3 player.

  Created MP3 in trouble.

  I have a great difficulty level to the top of my mp3 player. I run the disk to configure, but it stops at halfway through saying error reading file C:\ProgrammeFiles\WindowsMediaPlayer\MediaManagerWPF\dotnetfx3setup.exe.Verify that the file exists and that you can access.

  Then you get a box saying try again or cancel so I tried again, but it stops after a few minutes! Please help someone before I start the window l.o.l

  Hello

  ·         What is the brand and model of MP3 player?

  Follow these methods and check if that helps:

  Method 1:

  Follow the steps in troubleshooting this article and check if that helps.

   

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

  Method 2:

  Also, try to install the redistributable Microsoft .NET Framework 3.0 on the computer and check if it helps:

  http://www.Microsoft.com/download/en/details.aspx?ID=31

• Unable to set the ets for Force10 S4810

  Hello

  Here is my version of switch-

  ==========================================================

  Force10 #show version
  Time operating system software real Dell
  Reference Dell operating system Version: 2.0
  Reference Dell Application Software Version: 9.5 (0.1)
  Copyright (c) 1999-2014 by Dell Inc. All rights reserved.
  Construction time: Thu Jul 31 21:20:08 2014
  Build Path: / sites/eqx/work/swbuild01_1/build01/E9-5-0/SW/SRC
  Dell Networking OS availability is 16 hour (s), 13 minute (s)

  System image file is "system: / / has.

  Type of system: S4810
  Control processor: Freescale QorIQ P2020 with 2 GB (2147483648 bytes), carrots (s) 1.

  M 128 bytes of memory starting flash.

  1 52 - port GE/TE/FG (SE)
  10 GigabitEthernet/IEEE 802.3 interfaces 48
  4 forty GigabitEthernet/IEEE 802.3 interfaces

  ==========================================================

  I created dcb-map with the settings below-

  ==========================================================

  Force10 #show running-config interface tengigabitethernet 0/22
  !
  TenGigabitEthernet 0/22 interface
  no ip address
  MTU 9216
  hybrid portmode
  switchport
  spanning tree pvst edge-port
  Dot1p-priority 7
  class service dynamics dot1p
  Card DCB converged
  !
  Lldp Protocol
  dcbx port-role auto-aval
  Eco version dcbx
  no downtime
  Force10 #show qos converged dcb-map
  -----------------------

  Status: complete
  PfcMode: WE
  --------------------
  PG: 0 TSA:ETS BW:20 PFC: OFF
  Priorities: 0 1 2 4 5 6 7

  PG: 1 TSA:ETS BW:80 PFC: WE
  Priorities: 3

  Force10 #.

  ==========================================================

  But the same BW settings are not reflected in VLE sent by switch port, what could be the problem here any idea?. Please find below the TLV page wireshark - DCBX

  

  Hello

  Have you seen our S4810 switch Configuration Guide (DCB installation included)

  en.Community.Dell.com/.../4250.Switch-configuration-guides-by-SIS

• Activate the DisplayPort for two external monitors on my X 201?

  Just got my new Win7 X 201 and am trying to connect my monitors external 19 "2. The VGA connects well, but the other monitor connected via a DisplayPort DVI 2 converter is not recognized by X 201.  How can I get it going?

  PLS, ignore this message - turns out be a connection problem. Time main operator!

• How to change the screen on my new monitor ratio?

  Original title: report of the screen

  How can I change my ratio of the screen for a new monitor, I bought?

  Right click on an empty space on your desktop, then...
  Properties-> (tab) settings->
  Then move the cursor in the box "Screen Resolution."

  HTH,
  JW

• HP Envy 7640: Unable to set the scanning resolution

  Have been unable to set the resolution of scan during the scanning of the glass in a computer file (pdf, jpg). Guide the user to the HP page 47 7640 said: "● If you want to adjust the size of the scan, output type, scan resolution, or file type and so on, start scan from the software of the printer."
  ● To avoid all scanned text wrong or missing, make sure that the brightness is set properly the
  software.
  ● If you want to scan a document with several pages in a single file instead of several files, run it
  Scanner with the software of the printer instead of the sweep of the screen of the printer".

  First of all, where is the "printer software" to start the scan?

  Have tried all this. When I opened the series HP Envy 7640 (network): Assistant of HP printer, I click on "Scan the Document or Photo a" place in the scanning area. No scan dialog box never opens. Actually I tried to reinstall the printer driver. No change. Always impossible to get a scan dialog box. In addition, when I go in the start menu and the title of the series 7600 HP: HP envy, I click on the HP Scan icon. After a long wait, a dialog box appears that says: "Cannot communicate with Scanner", and it offers a few options. The first is to activate the device (printer), and then on; the second, control cables (its wireless operation); the third: try the software "fix." Happy to report that after stopping then on and running assistant printer again, this time by pressing the "scan a Photo Document' results in the appearance of a dialog box to make the changes that I've been looking for.

• Unable to get the screen resolution of 1920 x 1080 on my W520

  I just got a W520 with a NVIDIA Quadrom 1000 M and I can't seem to set the screen resolution of 1920 x 1080 (maximum resolution that I am able to do is 1600 x 900).

  then the screen that was provided was 1600 x 900

• Unable to set the transparency of the taskbar to laptop with windows 7.

  Original title: Please read my problem and give a solution as soon as possible.

  HII all... I'm unable to set the transparency of a taskbar for laptop with windows7 operating system? He demonstrated a tab to find out "trouble shoot problem and sero effects transparency" and shortly after clicking the laptop turns on the screen several times...

  Hi Mary,

  We need additional information to help you with the problem of transparency, please answer the following.

  1. which antivirus app do you use?

  2. do you use wired or wireless Internet?

  3. What is the brand and model of the computer?

  If the graphics card and driver were installed after that Windows 7 was first set up, depending on the manufacturer, you may need to update the computer performance index, which will automatically enable Aero. I suggest update you the display update driver and check the status of the issue.

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the problem still exists; Keep the computer in a clean boot, run the Aero Troubleshooter and check the status of the issue.

  Guided Help: the problems of Aero in Windows 7.

  http://support.Microsoft.com/kb/976170?WA=wsignin1.0

  I hope this helps.

• How do I set the screen window size in a guest LinuxMint17 (WS7)?

  I am always on WorkStation 7 (last revision) because I discovered that after installing the update I bought I would be able to use 7 and I need that for some of my virtual machines...

  Anyway, now I need to test some features of Web server and need a KDE LinuxMint17 machine for this.

  Installation went well and I also installed the virtual machine; Tools of dishes without problem.

  As part of the installation, I put the size of the screen for the guest to 1024 x 768 in the properties of the VM.

  Then I could install the basic software that I need the terminal of the virtual machine.

  But it turns out that this screen is too small for the webbrowser, I need to run inside the guest, so I stopped and then replaced by the properties of the vm to display 1280 x 1024.

  The strange thing is that the guest does not adjust when I start again, it always appears in the size 1024 x 768.

  So I'm looking for help set the size of the screen correctly in the comments of LinuxMint17...

  Is it possible to make the largest screen in Linux?

  I looked at the System_Settings/Display_And_Monitor inside the guest, but I do not get a way to resize it.

  Or maybe there is way to allow resizing screen in VMWare Workstation settings for the prompt instead?

  Note that I have running in a window rather than the full screen because I use it as a test machine for stuff that happens in Windows...

  I tried Googling for Linux screen size settings but came empty-handed, suggestions addressed the other issues...

  I do not use Linux Mint but on other Linux Distros, I use the xrandr from a Terminal command to set the resolution of the screen when it is not available from the GUI.

  Execution of xrandr by itself will be out the available resolutions then, for example, use: xrandr-s 1024 x 768

• Replace the screen for one with a higher resolution on Satellite P850-12Z

  Hi all

  I read a lot on the internet about the replacement of the screen on computers laptop toshiba and also I saw a video on [how to replace the screen for a Toshiba Satellite P855 | http://www.youtube.com/watch?v=Ncz3ZaI2I-s].

  Is it possible to replace the screen for a Toshiba Satellite P850 12Z (original: 15.6"@1366x768) to another screen with a higher resolution (say: 15.6"@1920x1080 or 15.6"@1600x900)?

  I'm sure that the graphics card is able to function perfectly with this screen (nVidia GeForce GT630M 2048 MB dedicated) and also I read a lot on laptop screen replacement, and I know that this screen has a connector 40 pin and it is an LED Panel, so I won't have to worry about the ups.

  I found several screens (15.6"@1920x1080) who say they are compatible with Toshiba, but I wan't to make sure a higher resolution Panel replacement is possible.

  Thank you in advance.

  Hello

  Exchange of the display is not supported by Toshiba, so I don't think that someone here can help you with this.
  I assume that Toshiba offers multiple views for this model of laptop. Only seller is different but resolution 1366 x 768 is always the same as on the original laptop specification.

  You can try to contact the nearest Toshiba service provider and ask for help. If someone can help you with that service of Toshiba. They have access to the database of Toshiba and can possibly tell if another view is usable on your machine.

  All this is quite complicated.