Unable to sign in on Itunes (Windows 10 and Iphone) Apple ID or something else

Similar Questions

• Unable to Sign In - error iTunes Connect user authentication (2006)

  Hello guys, I am unable to connect to my iTunes Connect from my iPhone 6.

  The error that says "Unable to Sign In French - error authenticating user iTunesConnect (2006).

  Anyone faced similar questions before?

  Check your USB connections

  If you see the error 4005, 4013, 4014, learn what to door. If you see one of the errors below, you might have a USB connection problem:

  • 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650
  • 2000, 2001, 2002, 2005, 2006, 2009
  • An error message that includes, "an invalid response.

  Follow these steps to see if the problem is with your USB cable, a USB port or computer. Try again after each step:

  1. Use the USB cable supplied with your device. If you do not, try a different cable USB Apple.
  2. Switch to a different USB port on your computer. Do not connect on your keyboard.
  3. Plug it into another computer.
  4. If you still see the error, you can check for any other problem USB, with the third-party security softwareand the problems with hardware.

  If the problem persists, contact The Apple support.

  Get help with iOS update or restore errors - Apple Support

• Vista > iTunes Windows 7 and migration

  Hello, first time poster.  I had an older iPad where I got my music on a laptop running Vista.  More recently, I got a new iPad 2 air.  I still had my music on the laptop for a while.  However, in the last two months, this capability was broken.  The version of iTunes on the laptop is 12.1.27.  I can use this version of iTunes to manage the music on the laptop of course, but when I plug the new iPad 2 Air it says "the iPad is unusable because it requires a newer version of iTunes.  «On itunes and download»  I'll download it and the link specifically says that I get iTunes 12.3.3 for Windows XP and Vista.  So it should be good.  However, when I install it says "iTunes requires that your computer is running Windows 7 or newer.

  I also don't seem to be able to migrate this iTunes on my Windows 7 (12.3.2.35) desktop configuration.  On the Windows 7 Desktop, I certainly can't change the song information and perform basic tasks.  Also, I can't seem to even add music to iPad 2 air, but I don't know because I can't sort the music for iPad on the iTunes for Windows 7.  The iTunes on my desktop Windows 7 also has other music files detected, it lacks most of the music on my laptop.  Of course, I don't want to spend weeks to make some kind of manual cross-checking one by one all of the databases involved and trying to get my computer to look just like the laptop.  There must be some kind of clever way to migrate here.  In particular why iTunes 12.3.3 for Windows XP and Vista would give such a message of error?  I am on iOS 9.3.1.  Thanks in advance.

  Update from Apple system is broken in that it offers 12.3.3 as valid version on Windows XP and Vista.  Support for Windows Vista (and XP) was abandoned when Apple iTunes 12.2 released last year.  The latest (and certainly last) version in support of Vista is 12.1.3.6 - this is an out-of-sequence of September 2015 version that adds support for iOS devices 9, but has no music to Apple and other features added in iTunes, 12.2 and 12.3.  Links for installers:

  • iTunes for Windows XP SP3 and Vista 32-bit 12.1.3.6: iTunesSetup.exe
  • iTunes for Windows Vista 64-bit 12.1.3.6: iTunes6464Setup.exe
  • iTunes 12.1.3.6 for Windows Vista, 64-bit "for older video cards': iTunes64Setup.exe

  The last of them is actually (as well as all editions of '64-bit' iTunes before 12.1.2) 32-bit application with a 64-bit Installer - this should be used if you get a warning message about the incompatibility of the video card and can also send questions with bad audio playback, integration with 3rd party software and the overall stability of iTunes.  However, f you only need to migrate the library from Vista to Windows 7, you do not need to update the software on the laptop.

  To transfer your library of the Vista desktop from Win7 laptop, you must copy the complete library from the first to the last.  To do this with iTunes does not not on a system.  If you follow default iTunes, source on the laptop folder is C:\Users\username\My Music\iTunes - according to the size, you can copy it to a network using a USB key, or a disc hard external., this folder and all its contents should be copied in C:\Users\username\My Music\iTunes on the desktop (you can also access it as C:\Users\username\Music\iTunes).  If you have not added new media to the desktop, you can simply replace all content existing there.  Then launch iTunes on the desktop and you should find your entire library restored for you.  Because this method transfers the iTunes as well as your media database, it has the added benefit that your iDevices will see this as 'the same' library, so you will have no problems with the content being removed from the iDevice when you synchronize.

  Once everything is copied, and you have verified the results, and if you don't plan to use the laptop Vista with iTunes again, make sure that remove you your Apple ID on this machine.

  The following links provide more information:

  • How to move your iTunes library to a new computer - Apple Support - it's the 'official' documentation of the migration process
  • Make a library of portable split - steps that may be needed to bring the library on your laptop in the layout that makes it easy to migrate (applies only if you have media files outside of the standard folders iTunes Media or other changes made to the default functions of iTunes)
  • Backup your iTunes for Windows with SyncToy library - medium recommended for the copy of your library to/from an external drive with a tool. s more reliable that the standard copy of Windows works (particularly relevant if you have a large library).  The same method can be used to create and maintain a backup of your iTunes library - something you should do frequently.

• iTunes for iPad and iPhone PC backups 12.3 disappeared

  I am running Windows 10 and iTunes 12.3 and have several previous backups of iPhones and iPads, with which I've never had a problem (well, there is always a problem, but not this one). Now iTunes can't find backups. They are in the folder C:\Users\User\AppData\Roaming\Apple Computer\MobileSync\Backup (about 10 of them), but the iTunes preferences > devices shows no backup on this computer. Why does iTunes pick this up? And why I can't navigate for them? (Duh... iTunes does not allow to browse your computer for backups. It's only for 12 years).

  In addition, I did a backup of my computer, and the 'Back Up Now' and 'Restore backup' grayed out and the ' last backup: "said"your iPad has ever been saved on this computer. The backup is displayed in the folder above subsequently, but it does not save iTunes. I closed iTunes and rebooted. Still no backup device in the devices. And he always says "your iPad has never been saved on this computer", but it is nice enough to ask me if I want to make a backup. NO! I DON'T WANT TO MAKE A BACKUP! I JUST want TO HAVE ACCESS to THAT I just HAVE to!

  I got since 4 iPhones and iTunes since the same time, and I've done several times. There has ALWAYS been some kind of problem. I've always hated this program, but you need if you want to get your Apple devices on your computer.

  I think that iTunes would let you to browse for a backup. I use this program because I have to. Apple backups aren't really backups. iTunes backup of the operating system and applications (not all), but that's all. For me the backup is just that: a BACKUP. This means I save all THE data (or at least what I chose).

  Whenever I have back up and restore my Apple devices, I make sure that I export all data from all applications (in other words, if they allow it even and not more) or I have to re - download all my data or books, songs, PDF files and whether, from the original place where I have purchased or downloaded. That means free books don't get supported.

  I'm aware that I'm ranting, but I've always been frustrated by iTunes, because she is very small and has always been problematic. It is designed only to "purchases" commercial from Apple or other (perhaps) or for other commercial stuff, but never for your own personal use and I have a lot of personal data on my devices. iTunes DOESN'T backup the personal data. Of course, the program is free and a better program costs money, but even Windows provides a method for backing up my computer and I can back up everything of him, not only what Apple thinks is necessary.

  If they have backed up everything on your backup device would take ages - I have a 128 GB iPhone, iPod Touch and iPad mini - cannot afford to have three back ups of around this waist sitting on my PC.  Regarding the Apps it back to the top of such things when you are in a game and your scores, but not the actual application (I noticed when I got my last iPhone Apps that worked on that I had and put back them on the camera, but they picked up my library, not from the back to the top).

  You're not back up your iTunes library on the computer to make it there if necessary?  I do not use the cloud at all, I am doing everything via my PC (and have my laptop set in place with the same data backup in case of failure of the computer).  As we don't always have access to be able to download things if a device does not work (when ago far often data signal is very weak) I have never counted on the cloud even though I know that it suits a lot of people to use it.  Once the data is on my PC I have backup on an external hard drive.

  By doing this you don't have to re - download anything, you simply drag and drop the back on your device.

  Can't help with the unavailability of your inverter, but have you rebooted the iPad as it seems that your computer is not recognized among you have used before?

• Problems with Sims 3, iTunes, Windows 7, and shortcuts :/

  Recently I installed the Sims 3 World Adventures... I never had the chance to play because he went all funny :/ In any case, I've uninstalled it, but all me shortcuts from desktop and my shortcuts on the start menu still had the logo of the Sims 3... Whenever I pressed one of them it redirected to the Launcher. So logically, I uninstalled the Sims 3 (original game). All my shortcuts have become the white rectangles... They are now all the iTunes logo because it was the first thing that I opened. He said he did not know what program to use to open the shortcut so I chose iTunes, now they are all like that. I can't uninstall iTunes, there are too many important things about it... What should I do? :(

  Hello

  Thank you for keeping us posted.

  You can run the Fixit provided in the article and the Coachman.

  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  http://support.Microsoft.com/kb/950505

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope this information helps.

• Unable to share the printer between Windows 7 and XP

  Original title: "Mr."

  a desktop computer with windows xp professional and a laptop with windows 7 connected with ntwork wireless. share internet, but impossible to print. printer connon inkjet 1800 series connected to the computer via the USB port. Help me, printing from laptops.

  Hello

  
  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is of the Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  * Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Windows 8 pro with media center - Nvidia Geforce 8400 M G card and driver video problem or something else?

  Hi I have a problem with my Windows 8 pro with media center, my laptop has a Nvidia Geforce 8400 M G graphics card and driver crashes all the time also popups and windows menu has a black background, the only solution is a reboot, can you tell me what is a problem? Thank you

  Hi MAXUSVAN DERT.

  Glad to know that you have posted on the community of Windows 8.

  From your description, I can understand that you are unable to connect to Windows 8 pro with media center and you have a problem with installing the drivers.

  To install the drivers for Nvidia Geforce 8400 M G please follow the link below and check if the problem is resolved.
  http://www.nvidia.com/Download/index.aspx?lang=en-us.

  If the problem is not resolved, then try to install the drivers in compatibility mode.

  Follow the steps to install in compatibility mode:

  a. do the driver installation file right click and select properties and then tap or click on the Compatibility tab.
  b. check the run this program in compatibility mode for: box.
  c. press or click the menu drop down and select a previous operating system, and then tap or click OK.
  d. try to install the driver and verify.

  See also this link for compatibility mode.

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Also try Nvidia Support - check with the support that she might be a known issue.

  http://www.nvidia.com/page/support.html.

  Hope the above information helps. If the problem is not resolved, please get back to us and we will be happy to help you.

• I have just updated to windows 10 and I have no sound, everything else works fine

  I have no Audio, sounds or volume afte the update/upgrade of Windows 10. This is NOT the case yesterday when I don't have Windows 10 update/upgrade in my laptop Vaio from Sony. Everything works very well, is to take a mouse of logitech usb among other things. My Audio jack does not work for headphones will not do. I found an old usb headseat PS3 seems to work, according to this logic, a set of usb speakers would do the same thing. If you have a HD cable you can connect your laptop to an HDTV and use the TV speakers. What can I do to solve my audio problem?

  Go to control panel > system and security > system and to the left, click on advanced system settings. Once there, go to the Advanced tab, and under performance, click settings. Then, click on the Advanced tab, and under virtual memory, click on change. Now, I did uncheck automatically manage it paging file for all readers size and check again, but if this does not work I heard uncheck automatically manage paging file for all readers size and selecting size made on order and set the initial size and maximum size to 3072 should solve the problem. I hope this helps!

• The AEC on Highway-C & E code for windows, Android and iPhone

  Hello

  We have Expressway-C & E version 8.5.1 and Jabber client 10.6.2

  CUCM version is 10.5

  AEC on Highway-C & E does not work.

  For windows, I get a beep while shouting and nothing happens after you enter the code of the ACS.

  Any suggestion how to College working on the highway-C & E (VPN less Jabber)

  Rgds

  Rajesh Kumar

  Hi Renon,

  This is currently not supported, there is an open improvement to follow this

  https://Tools.Cisco.com/bugsearch/bug/CSCur54666/?reffering_site=dumpcr

  Support of AEC to Jabber via Mobile & Remote Access
  CSCur54666
   

  Description

• BlackBerry Z10 unable to sign into the account of BBM

  Hello

  I bought this phone is a few days, im unable to sign in the BBM account, username and password are correct
  It gives a date error not set, although it is
  concerning

  Reset factory... problem solved.
  Thank you

• iTunes cannot locate the iphone 6

  I try to add pictures from my windows 10 PC to my iphone 6.  I did it in the past, no problem.  Now my phone does not appear as a device in itunes when I plug.  I did tests of diagnosis and follow-up steps - verified updates windows 10 and iphone (both were updated), I tried different usb ports, watched in the device manage and everything seems ok and work, driver update iphone to computer (already had more recent), came into Apple mobile device service in my computer and reset auto and rebooted the computer and the phone as suggested.

  I have no support contract.  Anyway to solve my problem?  Using my iphone to show others my photos taken with my digital SLR is important my phone use - without my iphone has the ability becomes much less useful.

  Thanks a lot to think about my question.

  Bill

  In addition to various usb ports, tried cables different lightning?

  I guess you have tried all the steps detailed here:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

  Another suggestion that I have (thanks to turingtest2) is to uninstall and reinstall EVERYTHING according to:

  Troubleshooting problems with iTunes for Windows updates

  You can also try a version of iTunes for older video cards also available here:

  Troubleshooting problems with iTunes for Windows updates

• Z30 blackBerry not able to sign in Blackberry Protect. Backup and restoration of function does not. "Your device is not associated with a Blackberry ID."

  Unable to sign in Blackberry Protect.  Backup and restoration of function does not. Message is: "your device is not associated a Blackberry ID."  My Blackberry Messenger and Blackberry World works well so I'm sure this isn't a problem of ID on the phone.  I can sign in link, Blackberry.com and Protect.  I see my device to protect, but can't send messages, or view it on a map.  Times out with cannot reach peripheral message.  BB Protect on device has a circle whirling next to the on/off switch.  Cannot turn off.

  I deleted the link and re-installed.

  I reset the phone to the default (factory) and signed in.

  OS level is 10.2.1.3062

  BB link is 1.2.3.56

  I managed to understand this. I had to remove the device from the Blackberry Protect site.  Protect.BlackBerry.com. I deleted my new and connected device with my Blackberry ID.  I don't know if the step of wiping was necessary because I have not tried my backup with the current configuration of the device after the deletion.  The restoration is underway for me!

• Ad hoc problem with windows 7 and my I protect 3

  Hi I have the same problem with windows 7. It worked perfectly, last week and it now has the same msg. I followed the steps and it does not always help you. It works if I am close to a router and then I can put in place a special but will come with errors as the wi is off and it then resets it. Once reset the same msg saying windows cannot implement... Please help I use my I pad for virtual dj
  Now it is set up, but have a problem. It says no network share and it let me use something else, the I pad I joined and it shows on both devices, but does not open virtual dj. It worked last week

  Hello

  These links may help you.

  http://forums.techguy.org/networking/897027-Windows-cant-set-up-ad.html

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-computer-to-computer-ad-hoc-network

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/why-win-7-cant-remember-network-location-for-ad/d57f4440-238a-490f-96d5-cd4475888d3b

• Unable to save the 'Release Date' field in iTunes/Windows 12.4.0.119

  Unable to save the 'Release Date' field in iTunes/Windows 12.4.0.119

  I've just updated to 12.4.0.119 and can no longer add Release Date for a TV show.  When I go to "Get Info" and type the release Date, it allows me to enter a valid date, but as soon as I have the label off the field it emerges by itself.  If I enter the date and click on 'Ok', the date is not recorded.

  I had this same problem Windows 10. Just tested it on iTunes/Mac 12.4.0.119 - this platform will not yet you allow to select the release Date field to make an entry.

  It is a major issue, as AppleTV allow no sorting replacing television programs other than by Release Date.

• Unable to sign in window 8 bing app

  Unable to sign in window 8 bing app and cannot access an option 'COPY', "COPY the LINK" & "SAVE AS". Only "SET AS LOCK SCREEN" option is available.
  

  Hi Vincent,.

  Thank you for your response.

  By default these options will be enabled when you search for something.

  1. what happens when you try to connect?

  2. What is the error message?

  I suggest you run the utility for troubleshooting Microsoft accounts and check if it helps fix the problem.

  http://go.Microsoft.com/fwlink/?LinkId=268424

  Please, an update of the results. We will be happy to help you.