Unable to start - blue screen after Windows update

original title; on dell dimension C521... blue screen after Windows update last night 3/9...3:00am...running Vista

Can not even go in safe mode

Hello

try to do a startup repair or a system restore before the update using the Startup Repair disk if you don't have a vista dvd microsoft

the link below is how to download and get a vista disk startup repair, which you can start from the

http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

http://www.bleepingcomputer.com/tutorials/tutorial148.html

to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

Change boot order it do dvd drive 1st in the boot order

If you can make the above change how you receive updates to find the update problem

When right-clicking on it UAC prompt you hide it

http://www.bleepingcomputer.com/tutorials/tutorial140.html

Choose one of these settings:

Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

Tags: Windows

Similar Questions

  • I get a page_fault_in_nonpaged_area blue screen after Windows update yesterday.

    Hello
    I get a page_fault_in_nonpaged_area blue screen after Windows update yesterday. To do this, that every time I try to start the system.

    Whenever I try to start it gives options to start in safe mode, safe mode with network, safe mode with prompt etc., but all these options find you on the same blue screen with the error mentioned above, then it tries to restart with the same behavior over and over again.

    Any guidance will be appreciated. Thnx Nick

    Hello

    If you meet this new,
    http://mikemstech.blogspot.com/2011/12/troubleshooting-0x50.html

  • Blue screen after Windows updates

    Today, I got 12 updates to Windows update under Vista (security and others for internet explore). I use the 64-bit version and I get a blue screen and start each update even when I try individually. This is not the first time...

    No one knows why this happens?

    In the control panel choose reports on problems and Solutions (problem of type in the START search box), go to historical problem, right-click your error and choose check for the Solution. You can also examine the details.

    In administrative tools, choose the reliability and performance monitor and click on MonitoringTools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date. See if your plant has started to happen after you installed or uninstalled something.

    It may be useful to eliminate equipment defects

    Type of memory in the search box of start and choose Memory diagnosis

    In a command prompt (type command in the start search box then right click and choose Run as administrator) type

    CHKDSK c: /r

    If you have more than one drive replace C: with the other drive letters.

    Search for corrupted files by typing at the command prompt

    sfc/scannow

    You can clean boot troubleshooting http://support.microsoft.com/kb/331796

  • Windows blue screen after windows update FEB 10 2010 (stop: 0 x 00000050)

    After updating vista 32-bit with a major update and updates security 4-5 and 1 optional update, my system cannot load. I tried all the mods that are associated with the key f8 (as safe mod ect), then I tried to recover Vista disc, and then the repair system and still no-go. I've heard a chance to eliminate these additions with a command promp (for example using the Vista recovery disc) on an xp system. Unfortunately I have 32-bit vista, so the command prompt will be different slicely. My original Os cd can only perform format c: install and preserve old files or loading drivers (which I did not), so I downloaded and burned the vista recovery disk. I can't tell you my system specs because I can't make a dxdiag because I can't before the vista loading screen. From what I remember, I have a pentium quad core 2.4, 4 gig dual channel ram (I checked the memory diagnostics and is ok), gm-33 mother card, NVIDIA 250 gts grafic, power supply chieftec 550 w.

    Windows Update Forum:

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • Stop unexpectedly (blue screen) after Windows Update

    I have problems with BlueScreen unexpected shut downs to 9.8.2015.  I keep trying to use the Action Center to find solutions, but it will not report (telling me there is a problem connecting to the Windows error reporting service).  Below is an example of the most recent error report order.  This problem is mainly after my computer goes to sleep or sleep, but sometimes while active.  The problem also seems to have started after only a few Windows updates that were installed this past fall 2015.  Your help is greatly appreciated!

    Signature of the problem

    Additional information about the problem

    These accidents were related to the corruption of memory (probably caused by a driver).

    Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

    If you are overclocking anything reset by default before running these tests.
    In other words STOP! If you don't know what it means that you're probably not  


    1-Driver Verifier (for full instructions, see our wiki here)

    2-Memtest. (You can learn more about running memtest here)

    I would also update the driver associated with the driver support Dell Inc. PBA PBADRV.sys (yours is 2008) and if you continue to plant I would remove Symantec.

  • blue screen after windows update failed synaptics

    original title: bsod after updating windows failed synaptics

    Immediately after the installation of attempt and failure of an update of windows for synaptics ps/2 port touchpad ive had a bsod on logon. I don't know if the BSOD is associated with this update has failed. I think I might have some kind of malware. logon attempts sometimes take several tries to get it on the desk. im running a computer hp pavilion dv6700 laptop

    Follow these steps to try to solve your problems of boot.

     

    Restore point:

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    Do Safe Mode system restore, if it is impossible to do in Normal Mode.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    http://www.windowsvistauserguide.com/system_restore.htm

    Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    See you soon.

    Mick Murphy - Microsoft partner

  • Blue screen after windows update

    I have Windows XP. I recently installed an automatic update and now my cpu stops after about 30 seconds to a minute after going to windows. It does not start in safe mode. What can I do in safe mode to fix this?

    1 click on the "Start" button, click on "Control Panel" and then double-click "Add/Remove Programs" icon

    2 click on the check box "Show updates" at the top of the window and wait for the list of the installed updates to appear.

    3 click the update that you want to delete, click on the "Delete" button, and then restart your computer. The update is now properly removed from your computer.

    UTC/GMT is 01:39 on Wednesday, February 22, 2012

  • Satellite L500 - system hung on the splash screen after Windows update

    Hello

    I hope that someone can help you. My Satellite L500 is suspended on the blue startup screen after it restarted after a windows update, the mouse arrow moves and it seems to be a hard disk with a twinkle activity in the system lights. Except that nothing? Any ideas?

    Thank you
    Denise

    Hello

    > hung on the blue startup screen after it has restarted after a windows update
    This means that you get a blue screen after Windows update and more, you can start Windows t?

    You can start Windows in safe mode?

  • Satellite L450D - 13 X - blue screen after BIOS update

    I have the blue screen after BIOS update. Satellite L450D - 13 X worked ok before that ideas?

    Is there contact information for Support TOSHIBA?

    Hey,.

    > Is there any TOSHIBA support contact information?
    No, becaue, must contact an authorized service provider. Guys can help on any hardware and software problems and can also order spare parts from Toshiba.

    Here is a list of aspic, where you can look closer:
    http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT

    Good luck! :)
    ?

  • Get blue screen after Windows KB968389 updates

    I got the blue screen after that almost each update of Windows, but later is the following:

    Internet Explorer 8 for Windows Vista for x 64-based systems (25/08/09)
    Update for Windows Vista for x 64-based systems (KB968389) (11/08/09)

    I have a new Dell laptop Studio 15.  Do the system restore still does not work, or do not put the machine in Mode without failure.  I'm tired of spending hours trying to get my machine up and running

    Hello

    Certainly Support Dell help you change things anymore they can claim it was something
    you did it.

    Dell support
    http://support.Dell.com/

    Dell forums
    http://en.community.Dell.com/forums/

    My thoughts are that it is a driver problem. Try to update your drivers, and then stop the updated driver in Windows Updates.

    -----------------------------------------

    This is my generic how updates of appropriate driver:

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
    video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
    cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
    This will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
    own the software and drivers and all other main drivers that you have.

    Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
    (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
    updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

    Always check in the Device Manager - tab drivers version you install actually shows up. This
    because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
    pilot - reboot - check that it is installed and repeat if necessary.

    Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
    This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
    questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
    manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ----------------------------------------------------------

    My generic blue screen troubleshooting if necessary:

    Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
    Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
    codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
    information on all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

    You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
    system installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -----------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
    smile, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ------------------------------------------------------------------
    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    ------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Blue screen after windows xp update...

    I got the blue screen now well documented after windows xp update. I'm away on business and so unable to make my records at home. My question is without the disk is there a way I can fix it the laptop? Microsoft took 3 days to order discs and now tell me it might take 7 to 10 days so that they arrive. Not really customer service.

    Anyone has any ideas, is there something that you can download? or is there a fix on the Web site?

    Thank you

    What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

    A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

    =================================

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Blue screen after I updated the video driver windows and windows 7 keep crashing.

    Here is the blue screen dump, I can't do system restore, as it has been disabled.

    Please check and suggest what inside this dumps.

    https://onedrive.live.com/redir?RESID=D66A36D9B8E488C7%21956

    Thank you.

    This accident was related to the video or graphics will appear.

    Use! analyze - v to obtain detailed debugging information.

    Bugcheck 1000007E, {ffffffffc0000005, fffff880047ac54a, fffff88007bec3c8, fffff88007bebc20}

    Probably caused by: dxgmms1.sys (dxgmms1! VIDMM_DEVICE::RemoveCommitment + 22)

    Follow-up: MachineOwner

    Make sure that your drivers are up-to-date.

    ThinkPad W520

    http://support.Lenovo.com/us/en/products/laptops-and-netbooks/ThinkPad-w-series-laptops/ThinkPad-W520

  • Unable to start - blue screen STOP: 0X0000007E

    original title: STOP: 0X0000007E (0XC0000005, 0X89B16963, 0X8B76B87C, 0X8B76B578)

    I was working on my laptop Acer Aspire and suddenly my restarted windows and then leave her unable to start and just show a blue screen with the error code as STOP: 0X0000007E (0XC0000005, 0X89B16963, 0X8B76B87C, 0X8B76B578).

    I tried to run in safe mode, then even I tried all the options available in the Advanced menu to restart that we get after pressing F8 but just fails. Repair of the system showed the error Impossible to repair in the same way his unable to restore and unable to start with last successful boot setting.

    Kindly let me know what to do I have lots of important data in my hard drive that I don't want to lose.

    Hello

    Unless the drive itself is completely fried the data on disk can be recovered by putting the hard drive
    in another computer as 2nd or a case of external hard drive using a USB connection - then the data
    likely to be backed up or copied to other media.

    Of course, the major problem is that the system does not boot even in Safe Mode.

    Setup/settings (BIOS/CMOS) often F2 so screen shows that it boots CD/DVD on the 1st in the boot order-
    Start with a Windows 7 disc and try the Startup Repair tool. Also, try restoring the system from there. (Don't forget to)
    Set the boot order to when.)

    Those who cannot not helped at all and will need you the help of a real computer store (no leeks and)
    Displays a BestBuy or other stores) or system manufacturer support.

    =================================================================

    Here are the usual methods to troubleshoot the bluescreens if you have access to some and still have a
    problem.

    Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
    Troubleshoot the BlueScreens - top 3 answers.

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

    -----------------------------------------------------------------------------------------------------------------

    The system has RAID? If so, it is very suspicious.

    This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
    may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
    can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
    methods in the next message and then return to the if necessary troubleshooting tool.

    Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
    Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
    spyware/security programs.

    When you get to the pilot and sections of the memory of the troubleshooter check the following message to
    update drivers and memory test and then return to the troubleshooter if necessary.

    BCCode: 7F 0x0000007E which is also 0x1000007E

    Cause

    SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
    interpret, you must identify which exception has been generated.

    Common exception codes are:

    • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

    For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
    the Microsoft Windows Driver Kit (WDK).

    Solve the problem

    If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

    • Make sure you have enough disk space.
    • If a driver is identified in the bug check message, disable the driver or check with the
    • Reference of the manufacturer for driver updates.
    • Try changing video cards.
    • Check with your hardware vendor for updates to the BIOS.
    • Disable the BIOS memory options such as implementing caching or shading.

    If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
    (the address of the exception) must identify the driver or function that caused the problem.

    If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
    has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
    Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

    In case of exception code 0 x 80000002, the trap frame provides additional information.

    If you do not know the specific cause of the exception, consider the following questions:

    • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
    • List of Microsoft Windows Marketplace tested products.
    • Service driver or defective peripheral system. A service driver or defective peripheral system can be
    • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
    • and IRQ conflicts can also generate this error.

    If a driver is listed by name in the bug check message, disable or remove that driver. Disable
    or remove drivers or services that have been recently added. If the error occurs during startup
    sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
    Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
    in Safe Mode, you must start the computer by using the Recovery Console to access the file.

    If the problem is associated with Win32k.sys, the source of the error may be a third remote
    control program. If this software is installed, you can remove the boot of the computer service
    by using the Recovery Console, and then by removing the offending system service file.

    Check the system log in Event Viewer for additional error messages that might help identify the
    device or the driver that generated the bug check 0x7E.

    You can also disable memory cache BIOS may try to resolve the error. You should also
    Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
    For more information about these procedures, see the manual of your computer.

    The error that generates this message may occur after the first reboot during Windows Setup, or
    Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
    BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
    space, reduce the number of files on the disk drive hard target. Find and delete any temporary
    the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
    contain fragments of file saved to disk scans. You can also use another hard drive with more drive
    free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

    BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="">
    * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-
    -------------------------------------------------------------------------

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard event viewer
    Windows. TIP - Options - Advanced filter allows you to see a time rather
    of the entire file.

    http://www.NirSoft.NET/utils/my_event_viewer.html

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during ' blue screen of the.
    death ' crashes and displays information about all accidents of a table.
    Free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
    However, there are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
    program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Does not work
    tell all possible driver issues).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Satellite U300-159 - blue screen after Windows 7 installation

    Satellite U300-159. I did a clean install of Windows 7 Home Premium 64-bit. Since the upgrade, it has blue screen every time you start after approx. 1 min. blue screen * STOP: 0x000000f4. The computer restarts it self after a while.

    I checked memory with 2 different programs. No errors. HARD drive checked - no error.
    Updated the BIOS, but get the error 1275 attempted using Toshibe updateprogram code.

    Anybody have ideas, what to do?

    Hey,.

    I m a bit confused about your ad first, you wrote that you did a clean install and then you wrote something about an upgrade
    What's true?

    Anyway, if you see the blue screen in safe mode too? If this isn't the case, it seems to be a driver issue because in safe mode no drivers will be loaded.

  • Resolution problems screen after Windows Update

    On 7 August 09 Windows updater does its thing and reboot, my screen resolution is able to go to 1024 x 768. (Usually its 1920 x 1200) I have only the option of 800 x 600 and 1024 x 768 and nothing else, I uninstalled all updates except 1 that he would not let me uninstall (HOTFIX for Microsoft.net framework 3.5 SP1 KB9535...)  In addition all my programs/games that I started running in 1024 x 768 resolution I can't run now because of this problem.  I updated my latest graphic drivers from the manufacturer and off TMM I did after reading in another forum.  What are the options should I not counting as reformatting?

    Hi Danman4132000,

    Thank you for using the Microsoft Vista answers Forum.

    I suggest you to install drivers for your video card in the yourManufacturrer Web site.

    Go to the Device Manager and look at the properties of your video
    card.
    Then go to your manufacturer's Web site, download and install the correct drivers with make and model of your video card.

    If this does not work, put your computer to boot and check if it works very well.

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135/en-us

    Please let me know if this helps you.
     
    Kind regards

    Yama - Microsoft technical support.

Maybe you are looking for