Unable to start bootcamp after partitioning El Capitan
Lonely HI T,
I recently partitioned the drive where is installed OSX El Capitan. Now, to press the Option key at startup to the top, I can't select my Bootcamp partition to boot.
Here's the info re: my product:
Here is some information about: my volumes:
- I have OSX installed on a partition 'Macintosh SSD' a 500 GB SSD
- The files are on a 'Macintosh HD' partition in a 1 TB HARD drive
- I have Windows Bootcamp installed on a "SOLID" NTFS partition in the same 500GB SSD
- and another NTFS partition for Windows files "LIQUID" in the same 1 TB HARD drive
- I also have a new partition (which lead to my problem) "ScratchDisk' in the same 500GB SSD
Also very "SOLID" and "LIQUID" NTFS partitions are currently read-only that is ' owners: disabled "in disk utility after creating a new partition"ScratchDisk"for Photoshop in the same 500GB SSD and SOLID will not show up to start up after pressing the button 'Option '.
I already had Tuxera NTFS installed but uninstalled.
Below you will find the following information:
- diskutil list
- Cs diskutil list
- sudo TPG - vv - r see the/dev/disk0
- sudo fdisk/dev/disk0
Thank you for the patience and kindness in advance,
CESCO
Last login: Tuesday, February 2, 23:22:10 on ttys000
Cescos-iMac: ~ list of the Cesco$ diskutil
/ dev/disk0 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * GB 500,1 disk0
1: disk0s1 EFI EFI 209.7 MB
2: Apple_HFS Macintosh 250,0 disk0s2 GB SSD
3: disk0s3 Apple_Boot Recovery 650.0 MB HD
4: disk0s4 Apple_HFS ScratchDisk 99.2 GB
5: Microsoft data base SOLID 150,0 GB disk0s5
/ dev/disk1 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * 1.0 TB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_HFS Macintosh HD 899,2 GB disk1s2
3: Apple_HFS Recovery HD 650.0 MB disk1s3
4: Microsoft data base LIQUID 100.0 GB disk1s4
/ dev/disk3 (external, physical):
#: NAME SIZE TYPE IDENTIFIER
0: FDisk_partition_scheme * GB 500,1 DIS3
1: Windows_NTFS GB Seagate Expansion Drive 500.1 disk3s1
Cescos-iMac: ~ Cesco$
Cescos-iMac: ~ list of cs Cesco$ diskutil
No logical volume group CoreStorage found
Cescos-iMac: ~ Cesco$
Cescos-iMac: ~ Cesco$ sudo TPG - vv - r show/dev/disk0
Password:
See the TPG: / dev/disk0: mediasize = 500107862016; SectorSize = 512; blocks = 976773168
See the TPG: / dev/disk0: PMBR to sector 0
See the TPG: / dev/disk0: Pri GPT to sector 1
See the TPG: / dev/disk0: GPT Sec at sector 976773167
start index size summary
0 1 PMBR
1 1 Pri GPT header
2 32 table GPT Pri
34 6
40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 488188328 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC
488597968 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC
489867504 193675024 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC
683542528 262144
683804672 292968448 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
976773120 15
976773135 32 table dry GPT
976773167 1 dry GPT header
Cescos-iMac: ~ Cesco$
Cescos-iMac: ~ Cesco$ sudo fdisk/dev/disk0
Disk: geometry / dev/disk0: 60801/255/63 [976773168 sectors]
Signature: 0xAA55
From end
#: cyl hd s - cyl hd s id [Start - size]
------------------------------------------------------------------------
1: EA 1023 254 63 - 1023 254 63 [1-976773167]
02:00 0 0 0-0 0 0 [0-0] unused 03:00 0 0 0-0 0 0 [0-0] unused 04:00 0 0 0-0 0 0 [0-0] unused Cescos-iMac: ~ Cesco$
Please after the release of sudo dd if = / dev/rdisk0s5 account = 1 2 >/dev/null | hexdump - C
It will show you the first block of the SOLID wall. Tags: Windows Software Cannot start Bootcamp, after you have added the partition using disk utility My question is similar with repair Boot Camp after having created the new partition. recently I install the el capitan + windows 7 (using bootcamp), everything works fine after I add the third partition. (I anticipate the third partition will be use for dropbox, for mac and windows can sync-ing a dropbox for each folder). After I've done the third partition and restart the system, I want OPTION and found no windows. My mbp spec: MD101 2012 13 ", SAMSUNG 850 PRO SSD 256GO,. 16 GB RAM, elcapitan OS x + windows 7 ultimate. Thank you Can you post the output of the following commands in OSX Terminal? diskutil list Cs diskutil list sudo TPG - vv - r see the/dev/disk0 sudo fdisk/dev/disk0 The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order. I can't find Windows-bootcamp after installation of El Capitan After upgrading my Mac OS X LION at El Capitan system, I am unable to find bootcamp when I turn on my computer and press the option key. and when I check the disk partition the former bootcamp partition appears also under the name of Untitled I have so much important information about windows. I really need it back Error: "unable to start Windows XP" after recent updates Original title: Windows XP blocked Hello, I have 2 computers with Windows XP with SP2 and automatic updates. After the updates (17 June), two computers refuse to start. I get the message "Unable to start Windows XP" with different options to choose from, Mode without failure, last Configuration and boot Windows, but none of them works, he keeps just show this message even after trying in vain to restart. What can I do? Desperate enough now. Thank you. Disable the automatic restart in the event of system failure of the Windows startup option to know the error originally this problem. Disable the automatic restart in the event of system failure This option prevents Windows from automatically restarting if an error of Windows to fail. See this link to start in safe mode startup option: Original title: Windows Recovery Error Question Earlier I was looking at my computer, running a virus because my computer scan playing strange earlier. Every time I start Windows, I would be spammed with windows titles 'open with... '. ». I managed to open the Task Manager and get rid of all of them, but my computer shifted significantly again. Whenever I close it and restart the same thing would happen. I opened my virus scanner and started running it. Of course, he had a virus. As I was waiting for the analysis at the end, my computer suddenly closed and restarted without any warning at all. It froze on the splash screen. To stop and restart my computer again, I received a message that says: "Unable to start Windows. A recent hardware or software change might be the cause. If Windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem. If the power was interrupted during startup, choose Start Windows normally. » I was given two options: Launch Startup Repair (recommended) and start Windows normally. When I select the Startup Repair tool, I am taken to a screen with a loading bar that says "Windows is loading files... ». After loading, the screen would freeze. If I try the other option, I am taken to the splash screen and it would freeze. Is it possible to fix this? Any help would be greatly appreciated. Hello I suggest to unplug an external device connected to the computer and then try to start the computer and check if it helps. Otherwise I suggest you to contact the computer manufacturer for help. After the system starts. I get the error message; "" Unable to start Bluetooth stack service "from BTTray. Pls I need help to resolve this error message. Concerning Unfortunately, this model laptop has a Broadcom bluetooth device or a device of Atheros. Try to install the Atheros driver first because it is more common. If it isn't an Atheros card, Setup HP rejects the update indicating no match of material. If this isn't Atheros, install the Broadcom bluetooth driver. Here is the page of the driver for your laptop and Windows 7 64-bit. Bluetooth drivers are in the category network drivers. Let me know what happens. Bridge CC (64-bit) is unable to start the cache even after several time of virtue. Help! So frustrated! Hi julesmom, Please reset the Bridge preferences and then try it. Measures Start Adobe Bridge, and immediately press Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS down) until the dialogue box reset settings appears. Select all three options - reset preferences, reset Standard Workspaces and all miniature Purge Cache - and then click OK. Reference: troubleshooting errors, freezes | Adobe Bridge | Windows, Mac OS Let us know if it works. Kind regards ~ Mohit Unable to start the virtual machine after restoration Guests including Test host: ESXi 5.1.0.1065491 Vm problem: 32-bit, Server 2003 I use Veeam Backup & Restore 6.5 to back up my vm. I always do a test restore to ensure that my backups are good. I'm having a problem with a restore. The 32-bit Server 2003 vm starts just fine on the main host it runs on. All the vm are 64-bit except for one who is a 32-bit Server 2003 vm. Restoring the machine virtual and implemented on a host except the 32-Bit vm Server 2003 test. After restoration and trying power to the top, I get the following error: Unable to start the virtual machine. Turn on VPCM module has failed. Viewed performance counters require version 3 or greater of architectural performance monitoring. Anyone know if there is a fix for this problem? TIA, Mux I assume you are using different hardware (CPUs, the BIOS settings) for VMS restored! The virtual machine has VPCM enabled, which causes the problem. You can either disable it in vSphere Web Client (you can do this in the vSphere Client Windows), or directly modify the .vmx VM by setting vpmc.enable to "FALSE". For how toggle this setting in the Web Client see allow virtual in the Web Client vSphere CPU Performance counters. If you want to edit the .vmx file manually, you need to delete/re-add the VM from the inventory or recharge (see http://kb.vmware.com/kb/1026043) André Unable to start after P2V on Dell T5500 Trying to P2V Dell T5500 and the conversion was successful, but I am unable to start the virtual machine. Get status 0xc0000225. Can not even run a repair on the OS of windows and blocked in a loop. I use 5 converter and this computer running Win7. Any help is appreciated. Thank you There are a few things that you could check. I don't really expect to work but why not try? You must be running a reconfiguration again on the destination virtual computer. The other is to check the disk controllers. What type of controller has the source machine and what type is the destination VM? In general, I assume that a Windows forum would be more appropriate. After all the conversion was successful, and it is a Windows error with a bunch of possible reasons. Unable to start after you run the product recovery disc Hello My laptop was a dual boot with windows XP SP3 and ubuntu 1. He was infected by the virus and when I tried to clean it I removed the wrong file "services.exe", whereas windows does not work good there 2. when I tried to uninstall the windows update, I get the error following error: 1068: the dependency service or group could not start 3. so today, I found the toshiba recovery disks, I run and it commpleted, but now am not able to start my laptop. 4. when I try to re - install windiws xp I got the error below "couln can't find NTLDR. Guys, your help will be much appreciated Hello > I run and it filled, but now am unable to start my laptop Are you sure that installation completed successfully? Looks like the damaged MBR or cannot be attributed Hello You can try the troubleshooting provided in the links below steps to fix the problem. Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP http://support.Microsoft.com/kb/324103 Error message "STOP 0x0000007B" when you restart your Windows XP-based computer Make a bootable bootcamp after that it is already installed. Hello I have bootcamp installed on a second hard drive in my MacBook Pro 2011. Currently, Windows 10 is installed after the upgrade to Windows 7. Everything worked fine until I tried to add Linux as well. Once Linux has been installed, I "lack of OS" whenever I tried to start Windows. I've since removed Linux and my Bootcamp partition is still intact with all visible files through the side OS X. However, I can't start Windows. If I take the holding company option, there is no drive for Windows. However, if I select Windows/Bootcamp in the startup disk, although always under OS X, it loads but shows "No boot device - insert a bootable floppy disk and press a key." Is is possible for me to create just the boot for the Bootcamp/Windows partition volume without having to delete the partition completely and start from scratch? You will need to repair Windows 10 using a W10 installer when the disc is in the main Bay. Can you post the output of the following two commands OS X Terminal? diskutil list Cs diskutil list MBP is unable to start the recovery mode What I did: 1 created a BOOTCAMP WIN7 partition. 2 installed WIN7 without any problem. 3. after the installation realized this BOOTCAMP partition was too small to account for the applications. 4. in OSX, I used the disc utilities to create a new partition in the hope to expand WIN7 using computer management. Note: Did not know at this stage that I couldn't resize the BOOTCAMP partition. 5. in the reboot was missing the BOOTCAMP partition. Back to OSX and deleted the partition newly created in the hope of solving problem. It does not solve the issue returned if MAC partition to the previous size. 6. found online for instructions to restore the BOOTCAMP partition. Basically, I have executed (sudo/dev/disk0 gdisk), track your orders: r
7 bought WINCLONE and backed up my BOOTCAMP partition. Deleted the partition, BOOTCAMP and MAC returned to the original hard disk configuration. Back to manufacture settings. 8. resized by car using the disc utilities for what I tried to accomplish. WINCLONE to restore image BOOTCAMP. This large all worked. All partitions appear by pressing the alt/options when starting. I can't enter EC OSX and WIN7. 9. after having reached this point, I decided that it was important to turn SIP. When I tried to boot into recovery mode by using alt/options the MBP displays the loading splash screen but then goes off. So then I tried to use the command + r taking me to internet loading recovery. The recovery screen eventually load and when I try to run (enable csrutil) I get bash command not found error. Note: I ran disk utility first aid on the menu of recovery OSX EC and internet, no error. Still no luck with the transition into recovery mode. Current status: the two operating systems work very well. I was even able to update WIN7 WIN10 without any problem. I just can't in recovery mode to activate SIP. Any advice? My next option was to delete the BOOTCAMP partition and do a clean install, but I fear that my software purchased as FileMaker Pro and WINCLONE will be unavailable. I have a Time Machine backup and running. That said, when I tried to restore the iMac of the wife he not would allow me to restore the operating system using Time Machine. I don't know why, but I had to use my image to restore his computer. My MBP FileValt is currently disabled. He was turned on but felt the need to disable it to prevent that a possible problem. I made a backup of charges using Time Machine and also WINCLONE. Thanks in advance. Update: 1. I just finished a clean install of EC and that corrects my SIP number. I just want to add that Time machine worked very well! I was able to restore all applications. 2. next goal is trying to install WIN10 image and WINCLONE. My hope is that it will not change my MBR. Unable to start - blue screen STOP: 0X0000007E original title: STOP: 0X0000007E (0XC0000005, 0X89B16963, 0X8B76B87C, 0X8B76B578) I was working on my laptop Acer Aspire and suddenly my restarted windows and then leave her unable to start and just show a blue screen with the error code as STOP: 0X0000007E (0XC0000005, 0X89B16963, 0X8B76B87C, 0X8B76B578). I tried to run in safe mode, then even I tried all the options available in the Advanced menu to restart that we get after pressing F8 but just fails. Repair of the system showed the error Impossible to repair in the same way his unable to restore and unable to start with last successful boot setting. Kindly let me know what to do I have lots of important data in my hard drive that I don't want to lose. Hello Unless the drive itself is completely fried the data on disk can be recovered by putting the hard drive Of course, the major problem is that the system does not boot even in Safe Mode. Setup/settings (BIOS/CMOS) often F2 so screen shows that it boots CD/DVD on the 1st in the boot order- Those who cannot not helped at all and will need you the help of a real computer store (no leeks and) ================================================================= Here are the usual methods to troubleshoot the bluescreens if you have access to some and still have a Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of ----------------------------------------------------------------------------------------------------------------- The system has RAID? If so, it is very suspicious. This error is usually a driver problem and display adapter (video) driver is the most suspicious if she Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows When you get to the pilot and sections of the memory of the troubleshooter check the following message to BCCode: 7F 0x0000007E which is also 0x1000007E Cause SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO Common exception codes are: For a complete list of exception codes, see the Ntstatus.h file located in theinc directory Solve the problem If you do not have to debug this problem, you must use certain basic troubleshooting techniques.
If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
In case of exception code 0 x 80000002, the trap frame provides additional information. If you do not know the specific cause of the exception, consider the following questions: If a driver is listed by name in the bug check message, disable or remove that driver. Disable If the problem is associated with Win32k.sys, the source of the error may be a third remote Check the system log in Event Viewer for additional error messages that might help identify the You can also disable memory cache BIOS may try to resolve the error. You should also The error that generates this message may occur after the first reboot during Windows Setup, or BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="">-->
Look in the Event Viewer to see if something is reported on those. MyEventViewer - free - a simple alternative in the standard event viewer Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen As examples: BCCode: 116 or in this format: Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo) It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during ' blue screen of the. BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
You can do mode if necessary safe or the Vista DVD command prompt or This tells you how to access the System Recovery Options and/or a Vista DVD You can try a system restore to a point before the problem started when one exists. How to make a Vista system restore ------------------------------------------------------------------------- Start - type this into the search-> find COMMAND to top box and RIGHT CLICK- Enter this at the command prompt - sfc/scannow How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) The log can give you the answer if there is a corrupted driver. (Does not work Also run CheckDisk, so we cannot exclude as much as possible of the corruption. How to run the check disk at startup in Vista ------------------------------------------------------------------------- Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3 Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually. How to install a device driver in Vista Device Manager How to disable automatic driver Installation in Windows Vista - drivers
------------------------------------------------------------------------- How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart Troubleshooting, STOP error blue screen Vista Understanding and decoding BSOD (blue screen of death) Messages Windows - troubleshooting blue screen errors ------------------------------------------------------------------------- In some cases, it may be necessary. The Options or Vista recovery disk Startup Repair How to do a startup repair This tells you how to access the System Recovery Options and/or a Vista DVD I hope this helps. Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right. I recently started having truncated the attachments in the emails to my POP3 accounts. The first I noticed was on 27 July 2015. I wanted to send a bug report, but your system is unusable because it asks us to load the daily accumulation and essay on a new account, but the link to the daily version is going nowhere. But it's ok Thank you Thanks Matt. effects of IMessage are there more that what is said? r there hidden effect that are not human beings humans taught? Could some one adbice if they know what other tricks iMessage. Thanks 1million This problem started yesterday. I have not recently installed new programs. ProBook 650 G2: Core i7 6600U processor is only TWO CŒURS - evolution options? I recently got a HP Probook 650 G2. I 'wanted' the Probook for her one of the last phones built with serial port RS-232 'real' on board. I also wanted a quad core processor and would never have dreamed that a modern range high processor would double Play the Sansa Clip, and small stereo room I just got my Clip more today. One of the things I wanted to really be able to do was play through the small stereo I have in my room. I did a little research before you buy the video and found that what I had to do was to buy a cord that had the s The colors are almost sepia in shadingSimilar Questions
I cannot restart my computer and start windows after the analysis of the system running and the removal of any bad programs with Microsoft Security Essentials. I have rebooted, tried to finally start work configiration and back still an error for windows startup. Attempted to enter the mode by F8 safe failed I then chose without auto restart in F8 and get the BSOD - he tells me to search for viruses and run chkdsk/f, but I can't access it. I tried to restart and it still does not work. technical information on the BSOD readings * STOP: 0x0000007B (0xF7ae9528, 0xC0000034, 0 x 0, 00000000 000000000. Please help it is essential to address them ASAP edition)
in another computer as 2nd or a case of external hard drive using a USB connection - then the data
likely to be backed up or copied to other media.
Start with a Windows 7 disc and try the Startup Repair tool. Also, try restoring the system from there. (Don't forget to)
Set the boot order to when.)
Displays a BestBuy or other stores) or system manufacturer support.
problem.
Troubleshoot the BlueScreens - top 3 answers.
may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
methods in the next message and then return to the if necessary troubleshooting tool.
Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
spyware/security programs.
update drivers and memory test and then return to the troubleshooter if necessary.
interpret, you must identify which exception has been generated.
the Microsoft Windows Driver Kit (WDK).
(the address of the exception) must identify the driver or function that caused the problem.
has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .
or remove drivers or services that have been recently added. If the error occurs during startup
sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
in Safe Mode, you must start the computer by using the Recovery Console to access the file.
control program. If this software is installed, you can remove the boot of the computer service
by using the Recovery Console, and then by removing the offending system service file.
device or the driver that generated the bug check 0x7E.
Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
For more information about these procedures, see the manual of your computer.
Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
space, reduce the number of files on the disk drive hard target. Find and delete any temporary
the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
contain fragments of file saved to disk scans. You can also use another hard drive with more drive
free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.
* 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-
-------------------------------------------------------------------------
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm
Windows. TIP - Options - Advanced filter allows you to see a time rather
of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000
death ' crashes and displays information about all accidents of a table.
Free
However, there are other causes.
Options recovery if your system is installed by the manufacturer.
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
RUN AS ADMIN
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228
tell all possible driver issues).
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html
keyboard and mouse, as well as of other major device drivers.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx
quit unexpectedly
http://support.Microsoft.com/kb/958233
http://www.chicagotech.NET/Vista/vistabluescreen.htm
http://www.Taranfx.com/blog/?p=692
http://KB.wisc.edu/page.php?id=7033
http://www.Vistax64.com/tutorials/91467-startup-repair.html
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx
I'm running Thunderbird Version 38.1.0 on Windows on Windows 7 Home Premium service pack 1. After the test, I found that this happens on all POP3 accounts only. IMAP accounts do not work properly.
A single file is usually truncated, if I send several files to get a complete file one truncated and more sent are missing completely.
I had no luck by disabling addons, and I found that I'm unable to start in SafeMode (another problem to solve), but in research and the elimination of other culprits (malware) this problem stopped.Maybe you are looking for