Unable to start - compressed bootmgr

original title: all of a sudden when I start a message is displayed that says bootmnger compressed hit ctrl alt delete. And that is that I get; It keeps restarting at the same thing.

All of a sudden, when I boot I get a message which says bootmnger compressed hit ctrl alt delete. And that is that I get; It keeps restarting at the same thing. Vista won't start not even upward, it is said to hit ctrl alt delete after about 10 seconds after I turned on my lab top.

Hello

Restore the Boot Manager when it is missing or compressed
http://smallvoid.com/article/Winnt-Bootmgr-missing.html

Compressed Boot Manager
http://www.FixYa.com/support/t980316-compressed_boot_manager

Boot Manager compressed Boot Error Fix by Britec - video
http://www.YouTube.com/watch?v=3vyDWny6F84

BOOTMGR is compressed
http://www.faultwire.com/solutions-fatal_startup/Bootmgr-is-compressed-* 1356.html

I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Tags: Windows

Similar Questions

  • EFI VMs are unable to start

    I have a strange problem.  A new vSphere environment 6, EFI VMs are unable to start.  They get stuck at the Windows startup screen and never reach this point.  VMs of BIOS on the same LUNS and hosts fine start.

    2016-01-06_11-44-14.png

    I have a support ticket open with VMware support which is now at the level of engineering, but thought I'd throw out to the community as well since I saw developers VMware here in the past.

    The generation of ESXi what we lack is 3247720 (ESXi 6.0 Express Patch 4).  The hosts are connected via FC in HP 3PAR table.

    When the virtual machine is turned on, the vmkernel spits drop of FCP errors until the virtual machine is turned off. We have worked with the storage provider to make sure there are no errors that occur on the table or the FC switches, and as mentioned, other virtual machines (BIOS) are running and start very well since the same LUNs.

    Any help would be greatly appreciated!

    Except in the file vmkernel.log during the startup of the virtual machine:

    2016-01-06T19:43:38.531Z cpu30:39135 opID=6060da5b)World: 15448: VC opID 68438541-00000303-1b-b8-9d-db-d9-01-f0-bf-83-e601 maps to vmkernel opID 6060da5b
    2016-01-06T19:43:38.531Z cpu30:39135 opID=6060da5b)Config: 680: "SIOControlFlag2" = 1, Old Value: 0, (Status: 0x0)
    2016-01-06T19:43:38.651Z cpu40:958701)World: vm 958702: 1647: Starting world vmm0:VM of type 8
    2016-01-06T19:43:38.651Z cpu40:958701)Sched: vm 958702: 6499: Adding world 'vmm0:VM', group 'host/user', cpu: shares=-3 min=0 minLimit=-1 max=-1, mem: shares=-3 min=0 minLimit=-1 max=-1
    2016-01-06T19:43:38.651Z cpu40:958701)Sched: vm 958702: 6514: renamed group 6355289 to vm.958701
    2016-01-06T19:43:38.651Z cpu40:958701)Sched: vm 958702: 6531: group 6355289 is located under group 4
    2016-01-06T19:43:38.653Z cpu40:958701)MemSched: vm 958701: 8109: extended swap to 57374 pgs
    2016-01-06T19:43:38.726Z cpu40:958701)VSCSI: 4038: handle 8214(vscsi0:0):Creating Virtual Device for world 958702 (FSS handle 15563773) numBlocks=209715200 (bs=512)
    2016-01-06T19:43:38.726Z cpu40:958701)VSCSI: 273: handle 8214(vscsi0:0):Input values: res=0 limit=-1 bw=-1 Shares=-1
    2016-01-06T19:43:38.738Z cpu3:32842)NMP: nmp_ThrottleLogForDevice:3178: Cmd 0x9e (0x439e419aec80, 0) to dev "mpx.vmhba32:C0:T0:L0" on path "vmhba32:C0:T0:L0" Failed: H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x20 0x0. Act:NONE
    2016-01-06T19:43:38.743Z cpu3:32842)NMP: nmp_ThrottleLogForDevice:3178: Cmd 0x1a (0x439e419aec80, 0) to dev "mpx.vmhba32:C0:T0:L0" on path "vmhba32:C0:T0:L0" Failed: H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0. Act:NONE
    2016-01-06T19:43:38.743Z cpu3:32842)ScsiDeviceIO: 2645: Cmd(0x439e419aec80) 0x1a, CmdSN 0x4140aa from world 0 to dev "mpx.vmhba32:C0:T0:L0" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0.
    2016-01-06T19:43:38.755Z cpu11:958702)VMMVMKCall: 235: Received INIT from world 958702
    2016-01-06T19:43:38.756Z cpu11:958702)LSI: 1755: LSI: Initialized rings for scsi0 async=1, record=0 replay=0
    2016-01-06T19:43:38.758Z cpu13:34906)Config: 680: "SIOControlFlag2" = 0, Old Value: 1, (Status: 0x0)
    2016-01-06T19:43:39.335Z cpu26:958702)VSCSI: 2590: handle 8214(vscsi0:0):Reset request on FSS handle 15563773 (0 outstanding commands) from (vmm0:VM)
    2016-01-06T19:43:39.335Z cpu43:33140)VSCSI: 2868: handle 8214(vscsi0:0):Reset [Retries: 0/0] from (vmm0:VM)
    2016-01-06T19:43:39.336Z cpu43:33140)VSCSI: 2661: handle 8214(vscsi0:0):Completing reset (0 outstanding commands)
    2016-01-06T19:43:39.336Z cpu26:958702)VSCSI: 2590: handle 8214(vscsi0:0):Reset request on FSS handle 15563773 (0 outstanding commands) from (vmm0:VM)
    2016-01-06T19:43:39.336Z cpu43:33140)VSCSI: 2868: handle 8214(vscsi0:0):Reset [Retries: 0/0] from (vmm0:VM)
    2016-01-06T19:43:39.336Z cpu43:33140)VSCSI: 2661: handle 8214(vscsi0:0):Completing reset (0 outstanding commands)
    2016-01-06T19:43:40.389Z cpu5:33642)NMP: nmp_ThrottleLogForDevice:3178: Cmd 0x28 (0x439e58ce6340, 958702) to dev "naa.60002ac00000000000001cfb000153f2" on path "vmhba2:C0:T2:L7" Failed: H:0x2 D:0x0 P:0x0 Possible sense data: 0x5 0x24 0x0. Act:EVAL
    2016-01-06T19:43:40.389Z cpu5:33642)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:43:40.389Z cpu5:33642)ScsiDeviceIO: 2607: Cmd(0x439e58ce6340) 0x28, CmdSN 0x8d65f24c from world 958702 to dev "naa.60002ac00000000000001cfb000153f2" failed H:0x2 D:0x0 P:0x0 Possible sense data: 0x5 0x24 0x0.
    2016-01-06T19:43:40.578Z cpu5:33642)WARNING: iodm: vmk_IodmEvent:193: vmhba2: FRAME DROP event has been observed 6 times in the last one minute. This suggests a problem with Fibre Channel link/switch!.
    2016-01-06T19:43:40.596Z cpu5:33642)NMP: nmp_ThrottleLogForDevice:3130: last error status from device naa.60002ac00000000000001cfb000153f2 repeated 10 times
    2016-01-06T19:43:40.640Z cpu14:858673)WARNING: iodm: vmk_IodmEvent:193: vmhba1: FRAME DROP event has been observed 6 times in the last one minute. This suggests a problem with Fibre Channel link/switch!.
    2016-01-06T19:43:40.810Z cpu14:33638)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:43:41.022Z cpu14:33638)NMP: nmp_ThrottleLogForDevice:3130: last error status from device naa.60002ac00000000000001cfb000153f2 repeated 20 times
    2016-01-06T19:43:41.806Z cpu14:33638)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:43:41.872Z cpu14:33638)NMP: nmp_ThrottleLogForDevice:3130: last error status from device naa.60002ac00000000000001cfb000153f2 repeated 40 times
    2016-01-06T19:43:42.796Z cpu5:33642)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:43:43.562Z cpu14:33638)NMP: nmp_ThrottleLogForDevice:3130: last error status from device naa.60002ac00000000000001cfb000153f2 repeated 80 times
    2016-01-06T19:43:43.795Z cpu5:33642)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:43:44.795Z cpu5:33642)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:43:45.810Z cpu5:33642)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:43:46.805Z cpu5:33642)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:43:46.951Z cpu14:33638)NMP: nmp_ThrottleLogForDevice:3130: last error status from device naa.60002ac00000000000001cfb000153f2 repeated 160 times
    2016-01-06T19:43:47.795Z cpu14:33638)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:43:48.811Z cpu14:33638)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:43:49.797Z cpu14:33638)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:43:50.812Z cpu14:33638)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:43:51.005Z cpu14:33638)WARNING: iodm: vmk_IodmEvent:193: vmhba1: FRAME DROP event has been observed 252 times in the last one minute. This suggests a problem with Fibre Channel link/switch!.
    2016-01-06T19:43:51.028Z cpu5:32827)WARNING: iodm: vmk_IodmEvent:193: vmhba2: FRAME DROP event has been observed 252 times in the last one minute. This suggests a problem with Fibre Channel link/switch!.
    2016-01-06T19:43:51.807Z cpu14:33638)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:43:52.798Z cpu14:33638)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:43:53.712Z cpu14:33638)NMP: nmp_ThrottleLogForDevice:3130: last error status from device naa.60002ac00000000000001cfb000153f2 repeated 320 times
    2016-01-06T19:43:53.816Z cpu14:33638)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:43:54.807Z cpu5:33642)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:43:55.803Z cpu5:33642)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:43:56.810Z cpu5:33642)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:43:57.807Z cpu5:33642)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:43:58.340Z cpu28:32867)NMP: nmp_ThrottleLogForDevice:3178: Cmd 0x9e (0x43a65b99bf80, 0) to dev "mpx.vmhba32:C0:T0:L0" on path "vmhba32:C0:T0:L0" Failed: H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x20 0x0. Act:NONE
    2016-01-06T19:43:58.345Z cpu28:32867)NMP: nmp_ThrottleLogForDevice:3178: Cmd 0x1a (0x43a65b99bf80, 0) to dev "mpx.vmhba32:C0:T0:L0" on path "vmhba32:C0:T0:L0" Failed: H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0. Act:NONE
    2016-01-06T19:43:58.345Z cpu28:32867)ScsiDeviceIO: 2645: Cmd(0x43a65b99bf80) 0x1a, CmdSN 0x41411e from world 0 to dev "mpx.vmhba32:C0:T0:L0" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0.
    2016-01-06T19:43:58.367Z cpu19:32858)NMP: nmp_ThrottleLogForDevice:3178: Cmd 0x9e (0x439e612ac300, 0) to dev "mpx.vmhba32:C0:T0:L0" on path "vmhba32:C0:T0:L0" Failed: H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x20 0x0. Act:NONE
    2016-01-06T19:43:58.372Z cpu19:32858)NMP: nmp_ThrottleLogForDevice:3178: Cmd 0x1a (0x439e612ac300, 0) to dev "mpx.vmhba32:C0:T0:L0" on path "vmhba32:C0:T0:L0" Failed: H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0. Act:NONE
    2016-01-06T19:43:58.372Z cpu19:32858)ScsiDeviceIO: 2645: Cmd(0x439e612ac300) 0x1a, CmdSN 0x414124 from world 0 to dev "mpx.vmhba32:C0:T0:L0" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0.
    2016-01-06T19:43:58.621Z cpu22:32861)NMP: nmp_ThrottleLogForDevice:3178: Cmd 0x9e (0x439e585a6100, 0) to dev "mpx.vmhba32:C0:T0:L0" on path "vmhba32:C0:T0:L0" Failed: H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x20 0x0. Act:NONE
    2016-01-06T19:43:58.626Z cpu22:32861)NMP: nmp_ThrottleLogForDevice:3178: Cmd 0x1a (0x439e585a6100, 0) to dev "mpx.vmhba32:C0:T0:L0" on path "vmhba32:C0:T0:L0" Failed: H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0. Act:NONE
    2016-01-06T19:43:58.626Z cpu22:32861)ScsiDeviceIO: 2645: Cmd(0x439e585a6100) 0x1a, CmdSN 0x41412a from world 0 to dev "mpx.vmhba32:C0:T0:L0" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0.
    2016-01-06T19:43:58.797Z cpu5:33642)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:43:59.813Z cpu5:33642)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:44:00.804Z cpu14:33638)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:44:01.800Z cpu14:33638)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:44:02.015Z cpu5:32829)WARNING: iodm: vmk_IodmEvent:193: vmhba2: FRAME DROP event has been observed 400 times in the last one minute. This suggests a problem with Fibre Channel link/switch!.
    2016-01-06T19:44:02.095Z cpu14:32922)WARNING: iodm: vmk_IodmEvent:193: vmhba1: FRAME DROP event has been observed 400 times in the last one minute. This suggests a problem with Fibre Channel link/switch!.
    2016-01-06T19:44:02.815Z cpu14:33638)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:44:03.809Z cpu14:33638)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:44:04.798Z cpu14:33638)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:44:05.809Z cpu14:33638)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:44:06.803Z cpu5:33642)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:44:07.232Z cpu14:33638)NMP: nmp_ThrottleLogForDevice:3130: last error status from device naa.60002ac00000000000001cfb000153f2 repeated 640 times
    2016-01-06T19:44:07.801Z cpu5:33642)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:44:08.798Z cpu5:33642)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:44:09.812Z cpu5:33642)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:44:10.805Z cpu5:33642)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:44:11.795Z cpu14:33638)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:44:12.814Z cpu14:33638)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:44:13.007Z cpu5:33642)WARNING: iodm: vmk_IodmEvent:193: vmhba2: FRAME DROP event has been observed 400 times in the last one minute. This suggests a problem with Fibre Channel link/switch!.
    2016-01-06T19:44:13.088Z cpu14:33638)WARNING: iodm: vmk_IodmEvent:193: vmhba1: FRAME DROP event has been observed 400 times in the last one minute. This suggests a problem with Fibre Channel link/switch!.
    2016-01-06T19:44:13.812Z cpu14:33638)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:44:14.810Z cpu14:33638)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:44:15.802Z cpu14:33638)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:44:16.796Z cpu5:33642)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:44:17.795Z cpu5:33642)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:44:18.805Z cpu5:33642)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:44:19.799Z cpu5:33642)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:44:20.815Z cpu5:33642)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:44:21.806Z cpu5:33642)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:44:22.815Z cpu5:33642)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:44:23.811Z cpu14:33638)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:44:24.002Z cpu5:33642)WARNING: iodm: vmk_IodmEvent:193: vmhba2: FRAME DROP event has been observed 400 times in the last one minute. This suggests a problem with Fibre Channel link/switch!.
    2016-01-06T19:44:24.080Z cpu14:40215)WARNING: iodm: vmk_IodmEvent:193: vmhba1: FRAME DROP event has been observed 400 times in the last one minute. This suggests a problem with Fibre Channel link/switch!.
    2016-01-06T19:44:24.795Z cpu14:33638)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:44:25.807Z cpu14:33638)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:44:26.801Z cpu14:33638)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:44:27.796Z cpu14:33638)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.60002ac00000000000001cfb000153f2" state in doubt; requested fast path state update...
    2016-01-06T19:44:27.797Z cpu20:32859)NMP: nmp_ThrottleLogForDevice:3178: Cmd 0x9e (0x439e5c5d8200, 0) to dev "mpx.vmhba32:C0:T0:L0" on path "vmhba32:C0:T0:L0" Failed: H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x20 0x0. Act:NONE
    2016-01-06T19:44:27.803Z cpu20:32859)NMP: nmp_ThrottleLogForDevice:3178: Cmd 0x1a (0x439e5c5d8200, 0) to dev "mpx.vmhba32:C0:T0:L0" on path "vmhba32:C0:T0:L0" Failed: H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0. Act:NONE
    2016-01-06T19:44:27.803Z cpu20:32859)ScsiDeviceIO: 2645: Cmd(0x439e5c5d8200) 0x1a, CmdSN 0x4141ee from world 0 to dev "mpx.vmhba32:C0:T0:L0" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0.
    2016-01-06T19:44:27.837Z cpu0:958701)VSCSI: 6726: handle 8214(vscsi0:0):Destroying Device for world 958702 (pendCom 1)
    2016-01-06T19:44:27.837Z cpu0:958701)WARNING: VSCSI: vm 958702: 6730: closing handle 8214 with 1 pending cmds, 1 ref count
    2016-01-06T19:44:27.837Z cpu0:958701)VSCSI: 2590: handle 8214(vscsi0:0):Reset request on FSS handle 15563773 (1 outstanding commands) from (vmm0:VM)
    2016-01-06T19:44:27.837Z cpu43:33140)VSCSI: 2868: handle 8214(vscsi0:0):Reset [Retries: 0/0] from (vmm0:VM)
    2016-01-06T19:44:27.838Z cpu14:32922)lpfc: lpfc_scsi_cmd_iocb_cmpl:2154: 0:(0):3271: FCP cmd x28 failed <0/7> sid x011500, did x010000, oxid x252 iotag x558 Abort Requested Host Abort Req
    2016-01-06T19:44:27.838Z cpu14:33638)NMP: nmp_ThrottleLogForDevice:3178: Cmd 0x28 (0x439e58ce6340, 958702) to dev "naa.60002ac00000000000001cfb000153f2" on path "vmhba1:C0:T0:L7" Failed: H:0x8 D:0x0 P:0x0 Possible sense data: 0x5 0x24 0x0. Act:EVAL
    2016-01-06T19:44:27.838Z cpu14:33638)ScsiDeviceIO: 2589: Cmd(0x439e58ce6340) 0x28, CmdSN 0x8d65f24c from world 958702 to dev "naa.60002ac00000000000001cfb000153f2" failed H:0x8 D:0x0 P:0x0
    2016-01-06T19:44:27.838Z cpu43:33140)VSCSI: 2661: handle 8214(vscsi0:0):Completing reset (0 outstanding commands)
    2016-01-06T19:44:30.073Z cpu2:33459)lpfc: lpfc_rportStats:4205: 0:(0) Compression log for fcp target 0, path is ok, TMGMT: abts=1, tgt_rst=0, lun_rst=6
    2016-01-06T19:44:30.073Z cpu2:33459)lpfc: lpfc_rportStats:4241: 0:(0) Compression log for fcp target 0, path is ok, FRAME: drops=1275, under=0, over=0
    2016-01-06T19:44:30.073Z cpu2:33459)lpfc: lpfc_rportStats:4241: 0:(0) Compression log for fcp target 1, path is ok, FRAME: drops=1274, under=0, over=0
    2016-01-06T19:44:30.650Z cpu2:33459)lpfc: lpfc_rportStats:4241: 1:(0) Compression log for fcp target 0, path is ok, FRAME: drops=1278, under=0, over=0
    2016-01-06T19:44:30.650Z cpu2:33459)lpfc: lpfc_rportStats:4241: 1:(0) Compression log for fcp target 2, path is ok, FRAME: drops=1277, under=0, over=0
    

    Just to officially close the loop on this, it turns out be a bug with 16 GB HBA on berries 3PAR.  HPE has fixed the bug with 3.2.2 EMU2, which updates the HBA firmware.

    In the meantime, we were able to use the solution of disk.maxIOsize.

  • I'm unable to start Firefox. To get the message that it is already running. Cannot find my profile using '% APPDATA%\Mozilla\Firefox\Profiles| '. What should I do

    I'm unable to start Firefox. To get the message that it is already running. Cannot find my profile using '% APPDATA%\Mozilla\Firefox\Profiles| '. Restarting my computer did not help. Because I had this problem I also noticed that all my favorites that I had copied in Windows Internet Explorer also disappeared. I use Firefox as my main search engine and usually do not use Internet Explorer. I am running Windows 7 on my machine.

    Try this add on the profile folder

  • Unable to start after you run the product recovery disc

    Hello

    My laptop was a dual boot with windows XP SP3 and ubuntu

    1. He was infected by the virus and when I tried to clean it I removed the wrong file "services.exe", whereas windows does not work good there

    2. when I tried to uninstall the windows update, I get the error following error: 1068: the dependency service or group could not start

    3. so today, I found the toshiba recovery disks, I run and it commpleted, but now am not able to start my laptop.

    4. when I try to re - install windiws xp I got the error below "couln can't find NTLDR.

    Guys, your help will be much appreciated

    Hello

    > I run and it filled, but now am unable to start my laptop

    Are you sure that installation completed successfully? Looks like the damaged MBR or cannot be attributed

  • Satellite P15-S420: unable to start Windows XP

    I hope that all makes sense... I'm unable to start after the start page of Windows XP. I think I have assumed that the computer turn off when there is no. The battery may have exhausted and when I plugged it back in and tried to start it would not.

    When the Windows start page is in place, it seems that HD works for awhile, but stops and goes no further. I am able to boot in safe mode and have tried to restore with no effect. When I click on Toshiba Manager of power supply in the control panel I get "Policy of NoteBook Load Fail" this could be a problem.

    What do you think???
    Oh, I have a Satellite P15-S420.

    Hello

    In my opinion, this power saver error message occurs because you started the laptop in safe mode. In this case, the OS doesn't use the Toshiba drivers that are required for the use of additional applications.
    You write about the restore procedure. Have you tried to install the laptop with the supplied restore CD? If this isn't the case, then try it.

  • ERROR: Unable to start Bluetooth stack service

    I seldome use features wireless to my pc before, but now that I have the wireless router I frequelty use it. Usually, I turn on the wireless switch and turned off to save the battery. I noticed every time I turn on the radio, after a few minutes, that an error message is displayed:

    BTTray

    ERROR: Unable to start Bluetooth stack service

    I don't know if what is wrong with my laptop. Please if anyone can tell me if what is wrong with this thing. Thank you very much!

    HP pavilion dv6820ee

    OS: Windows Vista editions Home premium.

    Message edited by xXxonins on 12/22/2008 05:27

    Access your product download page and reinstall the software for bluetooth under networks:

    http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=2093 & LC = on & DLC = in & CC = US & Product = 3716846 & lang = in

    then, under network connections in the network and sharing window - see if you have a bluetooth adapter that is listed.  If you do not use bluetooth, you can turn it off or you should be able to set it up properly.

    If fails it then in Control Panel, under administrative tools, Services - locate service BTtray and disable it.

    HTH

  • Satellite P200HD-1DV: the error event to the startup-unable to start a DCOM Server

    Whenever I restart it is extremely slow and in my opinion, caused by the following 2 errors that appear in the system as event ID 10000 event log:

    Unable to start a DCOM Server: {7160A13D-73DA-4CEA-95B9-37356478588A}. Error: '2 '.
    Happened at the start of this command:
    C:\windows\system32\igfxext.exe-integration

    Unable to start a DCOM Server: {078AEF33-C48A-49F7-AFF3-A0EE810BFE7C}. Error: '2 '.
    Happened at the start of this command:
    C:\windows\system32\igfxsrvc.exe-integration

    I think they are Intel drivers, but have failed to find a cure for this problem.
    Other than a real slow start it seems no problem.
    Am that I the only one having this problem and everyone know the cure?

    So, you understand where the problem is but why didn t you have installed graphic drivers intel one another? I mean, you know where is the problem and you can correct it.

    Otherwise, if a reinstallation does not help, it would be better to completely recover your system to eliminate the problem.

    Greetings

  • Unable to start bootcamp after partitioning El Capitan

    Lonely HI T,

    I recently partitioned the drive where is installed OSX El Capitan. Now, to press the Option key at startup to the top, I can't select my Bootcamp partition to boot.

    Here's the info re: my product:

    Here is some information about: my volumes:

    • I have OSX installed on a partition 'Macintosh SSD' a 500 GB SSD
    • The files are on a 'Macintosh HD' partition in a 1 TB HARD drive
    • I have Windows Bootcamp installed on a "SOLID" NTFS partition in the same 500GB SSD
    • and another NTFS partition for Windows files "LIQUID" in the same 1 TB HARD drive
    • I also have a new partition (which lead to my problem) "ScratchDisk' in the same 500GB SSD

    Also very "SOLID" and "LIQUID" NTFS partitions are currently read-only that is ' owners: disabled "in disk utility after creating a new partition"ScratchDisk"for Photoshop in the same 500GB SSD and SOLID will not show up to start up after pressing the button 'Option '.

    I already had Tuxera NTFS installed but uninstalled.

    Below you will find the following information:

    • diskutil list
    • Cs diskutil list
    • sudo TPG - vv - r see the/dev/disk0
    • sudo fdisk/dev/disk0

    Thank you for the patience and kindness in advance,

    CESCO

    Last login: Tuesday, February 2, 23:22:10 on ttys000

    Cescos-iMac: ~ list of the Cesco$ diskutil

    / dev/disk0 (internal, physical):

    #: NAME SIZE TYPE IDENTIFIER

    0: GUID_partition_scheme * GB 500,1 disk0

    1: disk0s1 EFI EFI 209.7 MB

    2: Apple_HFS Macintosh 250,0 disk0s2 GB SSD

    3: disk0s3 Apple_Boot Recovery 650.0 MB HD

    4: disk0s4 Apple_HFS ScratchDisk 99.2 GB

    5: Microsoft data base SOLID 150,0 GB disk0s5

    / dev/disk1 (internal, physical):

    #: NAME SIZE TYPE IDENTIFIER

    0: GUID_partition_scheme * 1.0 TB disk1

    1: EFI EFI 209.7 MB disk1s1

    2: Apple_HFS Macintosh HD 899,2 GB disk1s2

    3: Apple_HFS Recovery HD 650.0 MB disk1s3

    4: Microsoft data base LIQUID 100.0 GB disk1s4

    / dev/disk3 (external, physical):

    #: NAME SIZE TYPE IDENTIFIER

    0: FDisk_partition_scheme * GB 500,1 DIS3

    1: Windows_NTFS GB Seagate Expansion Drive 500.1 disk3s1

    Cescos-iMac: ~ Cesco$

    Cescos-iMac: ~ list of cs Cesco$ diskutil

    No logical volume group CoreStorage found

    Cescos-iMac: ~ Cesco$

    Cescos-iMac: ~ Cesco$ sudo TPG - vv - r show/dev/disk0

    Password:

    See the TPG: / dev/disk0: mediasize = 500107862016; SectorSize = 512; blocks = 976773168

    See the TPG: / dev/disk0: PMBR to sector 0

    See the TPG: / dev/disk0: Pri GPT to sector 1

    See the TPG: / dev/disk0: GPT Sec at sector 976773167

    start index size summary

    0 1 PMBR

    1 1 Pri GPT header

    2 32 table GPT Pri

    34 6

    40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

    409640 488188328 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

    488597968 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

    489867504 193675024 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

    683542528 262144

    683804672 292968448 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

    976773120 15

    976773135 32 table dry GPT

    976773167 1 dry GPT header

    Cescos-iMac: ~ Cesco$

    Cescos-iMac: ~ Cesco$ sudo fdisk/dev/disk0

    Disk: geometry / dev/disk0: 60801/255/63 [976773168 sectors]

    Signature: 0xAA55

    From end

    #: cyl hd s - cyl hd s id [Start - size]

    ------------------------------------------------------------------------

    1: EA 1023 254 63 - 1023 254 63 [1-976773167]

    02:00 0 0 0-0 0 0 [0-0] unused

    03:00 0 0 0-0 0 0 [0-0] unused

    04:00 0 0 0-0 0 0 [0-0] unused

    Cescos-iMac: ~ Cesco$

    Re: Unable to start bootcamp after partitioning El Capitan

    Please after the release of

    sudo dd if = / dev/rdisk0s5 account = 1 2 >/dev/null | hexdump - C

    It will show you the first block of the SOLID wall.

  • Error BTTray: Unable to start Bluetooth Stack Service

    I have an Envy 17 3D (product number: LV045UA #ABA). Recently, shortly after startup, I get an error to the effect that there is a BTTray error as it is unable to start bluetooth stack service.

    I use a Bluetooth Logitech mouse and the mouse continues to work. Befire I started having error, periodically that the mouse could be suddenly disconnected and I must initiate a discovery of the mouse with the Bluetooth discovery mechanism.

    Usually after the rediscovery of the mouse, I would have no other episodes for several days with a new day evey bootup. The error is only a recent development, but the episodes of disconnecting long enough.

    I'm not even sure that the two are linked, and I watch inconsequential number BTTray. However, I want to solve this problem of BTTray error until something of consequence occurs.

    Kind regards

    S.M. Cohen

    Hello

    Please reinstall the driver for Bluetooth module and this problem will be solved.

  • Windows is unable to start.

    Owner of a Pavilion wa694ua #aba little more than 2 years.  Windows is unable to start.  During windows Startup Manager, I receive a status of: 0xc000000f and info: start the selection has failed because the required device is inaccessible.  What to do next?  I have the recovery disks, but is not no longer works.

    Your hard drive may have failed and must be replaced. Enter the BIOS by typing/holding the F10 key immediately after switching on the laptop. Use Diagnostics to test your hard drive.

  • answer me please! Unable to start? Bluetooth stack service! that means this popup

    I got NO help from anyone Thanks much all that you brains out there cannot get a response?

    From the other thread:

    Unable to start Bluetooth stack service? What is this and how do I get rid of him. printer works well. This service is useless.

    Hello! very annoyed with a popup that I said at the top left of the BTty yellow! mark in the middle of the box and the message unable to start Bluetooth stack service, I click OK and it goes away a while tried all my settings are unable to get rid of it. It started when I let a 2nd. or 3rd. part microsoft co. take possession of my pc to difficulty clutter & defragment only HELP get me to pay 149.99 at this time, very unhappy.

    Hi Patgariepy,

    What operating system is installed on the computer?

    You get this error if the drivers are not updated, or if the driver has been corrupted. I suggest measures are:

    Method 1: Bluetooth device driver update. Steps to update the device driver:

    a. click on start
    b. Select Control Panel
    c. Select system and maintenance
    d. click Device Manager (if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.)
    e. in the Device Manager, look for the Blue tooth device
    f. click on the driver tab and then select Player update

    Link for reference: updating a hardware driver that is not working properly

    http://windowshelp.Microsoft.com/Windows/en-us/help/b3c6477e-1111-4B9F-A52A-fffdc51e9c901033.mspx

    Method 2: Uninstall the Bluetooth device, restart the computer and install the latest drivers.

    You can even check out the link below, which will set the Blue tooth device: point of Bluetooth in Control Panel on a Windows Vista SP2 does not work as expected when you click the http://support.microsoft.com/default.aspx/kb/960531elementNote: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

    Keeps us up-to-date on the State of the question.

  • Unable to start bluetooth stack service

    I can't not connact my phone to my laptop via bluetooth and get the following ERROR... UNABLE TO START BLUETOOTH STACK SERVICE.

    A large part of the obligation for any help.
    Thank you

    Hello

    Method 1.

    Try these steps and see if it works.
    Step 1: Start the Bluetooth service.
    a. Click Start, type services.msc and press to enter.
    b. in the list of components, double-click Bluetooth support Service.
    c. change the startup type to automatic and click on the Start button to start the service (verification of the d.       d.Dependencies of this service and make sure that they can also be programmed to automatic)
    e. click on apply and then click ok.

    Method 2: Bluetooth device driver update. Steps to update the device driver:

    a. click on start

    b. Select Control Panel

    c. Select system and maintenance

    d. click Device Manager (if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.)

    e. in the Device Manager, look for the Blue tooth device

    f. click on the driver tab, click Update driver

    Link for reference: updating a hardware driver that is not working properly

    http://windowshelp.Microsoft.com/Windows/en-us/help/b3c6477e-1111-4B9F-A52A-fffdc51e9c901033.mspx

  • Windows XP SP3: Unable to start, System Restore cannot drag and drop ALL the files/folders on the desktop and applications, many unable to start, services cannot search, cannot copy or transfer the any files folders...

    After a recent power outage, my system has restarted with a weird and very common Windows problems range. The system boots fine, all my personal files/folders/apps are intact, have suddenly stopped almost all functions of applications, but many crucial functions of the Windows kernel. Everything seems to point to several Windows Services are unable to start (administrative tools on the start menu). I am running Win XP SP3 and that he was going to upgrade to Windows 7, but I wanted to backup everything in advance. As I have 29 000 hours on my C: drive and a lot of time invested in my system, files, and applications, I am extremely reluctant to risk losing my files and applications by performing any type of reinstalling Windows. Strangely, begin to almost all my apps and all my files are accessible for the most part, but I've lost the ability to drag and drop files, folders or items in a list within the applications COMPLETELY. I can't copy or paste anything, can't move the desktop icons (although I can create new files and folders). So at the moment I can't save anything or even a single file transfer to a hard drive on another storage medium. Immediate reaction: try safe mode and try the system restore safe mode has the same problems (likely due to the large number of system services that inexplicably refuses to start) and the system restore says an error window saying "system restore is not able to protect your computer at this time. try restoring the system running and restart again", which of course NEVER changes. It's the equivalent of getting a tire on your car in the middle of nowhere to find the spare tire flat and the missing Jack. I have used to be fanatical about the definition of the regular restore points, but now can not access them. I have backups of most of my personal files, but over years have lost most of the original installation CD for many of my applications (there are over 100 applications on my system) and I don't want to lose the file associations and architecture of directory tree that it took my so long to implement. I started with Win XP media center edition of first (circa 2004 or almost) and have migrated twice more of 3 hard disks and 2 computers. All this time (5 years of daily use), I have NEVER known so many malfunctions for as many Windows basic and vital functions at the same time. I tried a lot of 3rd party "windows fix - it / registry repair" apps, all have no effect. Everything I can speculate is there was some serious damage to the registry and have no idea how/why so many Services refuse to start. In MMC, more than half of the services actually start and run, the rest all give the error message "the service or dependencies is not start (error 1068).» In addition, very oddly, no. APPS or windows appear in the toolbar AT ALL, but the Quick Launch toolbar works very well, just like the tray button and start tasks (?! )!). If I reduce a window, it "disappears" (Nothing on the task bar), but I can restore it using the alt - tab keyboard shortcut to switch apps, so all applications/windows appear on the list of the Task Manager. A few apps is paralyzed bad, as the player windows media, itunes, etc. (I guess because the service windows audio can not not start), some won't start at all, but 90% of them work fine, except to try to copy or back up all files. I can create new files, however. I'm desperate to find a solution to repair XP3 Win WITHOUT losing my installed applications and files, before I try and switch to WIndows 7. Any help/suggestions/links/advice would be much appreciated. I'm an experienced user, but I've never met so many malfunctions based on the OS at a time. I, however, very painfully learned (years before that my system so complex) it's been almost a re-installation of Windows guarantees to lose my installed apps and files, the directory tree architecture associations.

    Help, please!

    I'll be honest with you - your message is so difficult to read that I don't bother to go through all that. Next time consider using white space, ball or points numbered, etc. to make your message more readable. I stopped reading after your first sentence and only scanned the rest quickly. I do not mean to hurt your feelings; just trying to help you get targeted answers you need for the future.

    The blackout has corrupted your Windows installation. Back up your data now. Since you have problems so much, it would be probably best is to remove the hard drive, put it in a USB drive enclosure and attach it to another computer to copy the data OR start the target with Linux Livecd such as Knoppix system and copy the data to an external hard drive. IOW, do not use the damaged windows to try to get your data.

    You can try a repair that will leave your programs and facility data intact, but with this widespread bribery, it is unlikely to work. However, it takes only a few minutes and is so worth a try. If the repair facility does not work there is nothing to do, but a clean install. And Yes, it will mean that over again.

    Consider buying a UPS to help prevent future damage by power outages. For a single computer, you should look for one in the area of $60 to 80. A more expensive UPS is not necessary. Another good disaster recovery strategy is to buy an external hard drive and Acronis True Image. You can image your system (and can make an incremental backup image so that your image is still current). You can apply your image and be back running that you were in relatively few minutes after a hard drive or Windows to fail.

    http://www.michaelstevenstech.com/XPrepairinstall.htm - repair install how-to
    http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
    http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - you will need at hand MS - MVP - Elephant Boy computers - Don ' t Panic!

  • I am running XP Home Edition, when I right click on an icon/folder on my desktop, I get a fatal error message of "unable to start this program because it lacks the 'resources' directory or one of its subfolders. __

    I am running XP Home Edition when I right click on an icon/folder on my desktop, I get a fatal error message of «unable to start this program because it lacks the "resources" directory or one of its subfolders» How best to solve this problem without reload my OS which would be suh a pain that I've been running with it for many years and to return to, where I'm now should always be! »

    Right click issues are usually caused by third party software who pushed himself into the context menu. This is more easily managed using the ShellExView free program.

    http://www.nirsoft.net/utils/shexview.html - ShellExView

    Make a right-click is slow or weird behavior caused by context menus management - http://windowsxp.mvps.org/slowrightclick.htm
    Manage the entries in context menu for folders, readers, and the Namespace objects - http://windowsxp.mvps.org/context_folders.htm MS - MVP - Elephant Boy computers - Don ' t Panic!

  • Need help message' w/error Unable to start the s window media Interface. Make sure you have at least WMP10. »

    I downloaded WMP11 to download another program and I get this message ("unable to start the s window media Interface. Make sure you have at least WMP10. »).  This message appears when I click on the new program and it loads.  As soon as it loads the first program screen appears and displays this error message on WMP 10.  When I click ok it goes, but I can't get the new program to do anything.

    So before asking on the problem of new program, I would like to fix this so it keeps popping up.
    I'm not too calculates saavy so I need clarification.

    Thank you

    Where did you downloaded WMP 11?

    Uninstall WMP 11 and check again the issue. If it stops then reinstall WMP 11.

    http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11

    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=8163

Maybe you are looking for

  • I see the files but not access - advice please

    Had some problems of research of file here, would like some advice I'm running 2 external hard drive as time machine backups. For some reason, I needed to restore a dropbox folder, I was disconnected. I connect hard drive backup 1, and he died. Not a

  • HP Designjet T1300 error 08:04

    Hello! I have a T1300 Designjet, a few years old (2010 I think) and I have printed a few rolls of paper on it. (5-6)? There are a few firmware updates he has begun to show 08:04 error message. He asked me to update the firmware, if the problem persis

  • WiFi does not work if the SSID is not broadcast by router

    I have a new 55HX929 and tried to connect to my wifi with its built-in wireless adapter. I do not broadcast my network SSID the router for security and privacy. The searched TV network, does not, and then it asks to enter the SSID. Then, it saves the

  • Lost restore images...

    I lost my HP Netbook restore images skillfully and now I want to remove Linux and using the machine as a WIndows computer again. Is there a way I can get these images of HP?  I would just buy a copy of Windows Starter, but I can't find a source, and

  • Reset bios password for Mini 110-1135NR CNU9410WL8

    Hello I have this HP Mini 110-1135NR I had sitting in my closet, and for the life of me can not remember what the password is for the BIOS, I keep getting the code of CNU9410WL8 after the third attempt failed. I knew if the code is provided, it was p