Unable to start in the Office: black error screen

Similar Questions

• I tried to install windows vista on my laptop but I m unable to start because of a message error loading operating system.

  I tried to install windows vista on my laptop but I m unable to start because of a message error loading operating system. good quick response.

  Hello

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  Here's how to do a clean install of Vista:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  See you soon.

• Vista starts with black error screen arr2 arr3

  Original title: CODE ARR2 ARR3

  running vista boots to black error screen arr2 arr3 someone can tell me why and maybe tell me what to do to solve the problem

  Hi sdyess,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         Are you able to boot to the desktop?

  Follow the steps in the article.

  When you start a Windows Vista-based computer, the system may stop responding (hang) at a black screen

  http://support.Microsoft.com/kb/946532

• Unable to start before the Welcome screen - error Code: 0 x 00000050

  original title: can not go beyond the Welcome screen, or the safe mode works - Vista

  About 2 days ago I received the 'blue screen of death '. I tried to connect to the main user account, but the screen would not go further than the Welcome screen. I then tried to open a session through safe mode, but that no longer works. After a few tries to connect to my user account, I tried to log in through the guest account, which has worked. The guest account has worked as it should, I was also able to use the internet. After that I tried to connect it to my main account again, but it still does not work. If anyone can help me with this, ID really appreciate it!

  Here's what I got on the blue screen of death:

  STOP: 0 X 00000050 (0XC084A5F1, 0X00000000, 0X00000000, 0X826C1498)

  Data collection for the crashdump...

  initialization of the disk for the crashdump...

  Dump start for the physical memory to disk: 100

  Total physical memory dump.

  If this does not resolve the problem: Please reinstall your copy of windows vista completely

  Depending on the symptoms, it is very likely that this problem is caused by a conflict with third-party drivers or services. If you have a back up of all your data, please reinstall the operating system. A new installation of Windows Vista is always an effective way to solve such a problem. After formatting the hard drive and reinstall Windows Vista, we will obtain a new installation of Windows Vista. It is more stable than the current system.

  I look forward to your reply

  If this post can help solve your problem, please click the 'Mark as answer"or if you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• "Unable to connect to the Skype server" error on samsung wave 723

  I got Skype Lite (or the Java thing, whatever we call it - does not allow calls - only CAT) on my Samsung Wave 723 for more than six months. Earlier this week he suddenly disconnected me and when I tried to log in again it showed this error "Unable to connect to the server of Skype." almost immediately after, I started signing in. I tried to reset the settings in Skype, my phone settings, I took out the battery and reset even WiFi. Then I tried to connect with a few other WiFis - still the same error. My friend has the same version of Skype Lite on his cell phone, and it works very well and without errors.

  Anyone know how to fix this error? It is urgent, please.

  Solved the problem on my phone. I just had to add the area code to my phone number in the connection menu.

  @yousef8824: I downloaded my Skype Java one of those ages of links it is a. not useful at this time.

• Automatic deployment - unable to start correctly the ESXi 5.1 correctly on servers blade HP

  We have recently improved our vCenter to 5.1.0b and of course I wanted to update our shooting (stateless) ESXi blades immediately. It seems that it is a little more difficult, so I expected to be. The image very well construction work, HP tools are included without problems just like the pilot be2net. Except the blades I use to test my living image on the pitch at the start of the script/agents of hp - ams.sh.

  

  Then after a while, he continues, he goes to the main screen, but I am unable to use keys. I can't look at the log, it does not seem to get out of the "Screensaver" (black screen).

  

  The method that I used to generate these Images to run our stateless bladeservers has not changed at all, except that I use the image of ESXi 5.1 to build now. I have already updated all the firmware of the G7 BL460c blade, which shouldn't be a problem.

  I am also unable to view the logs during the accident, so I have no idea how to find out what could be the problem. I created a script to build ESXi images that I use to deploy automatically.

  # Add repository of VMware online so that we the last Image profiles and firmware
  Add EsxSoftwareDepot https://hostupdate.VMware.com/software/VUM/production/main/VMW-Depot-index.XML
  # Add the HP online filing to get access to all of the software packages of HP
  Add EsxSoftwareDepot http://vibsdepot.HP.com/HPQ/oct2012/index.XML
  # Add vSphere HA agent
  Add EsxSoftwareDepot https://XXXXXXXXXXXXXXXXX/vSphere-HA-Depot/index.XML
  # Network drivers
  Add EsxSoftwareDepot D:\Images\be2net-4.0.355.1-487292\be2net-4.0.355.1-offline_bundle-487292.zip
  #
  #
  # Vars used to set the name of the profile image ESXi, basically just a time-stamped name
  $DATESTAMP = get-date-Format yyyMMdd
  # Sort profiles of online VMware image to get the last image profile
  $ImageProfiles = get-EsxImageProfile | Where-Object {$_.} Name: like "* standard *"- and $_. {Name - notlike "* s-*"} | Sort-Object "Modifieduserid" - descending
  $ImageProfile = $ImageProfiles [1]
  $PROFILEAME = "CENTRIC - $DATESTAMP" - + $ImageProfile.Name
  # Create a copy of the last image in VMware online profile
  New-EsxImageProfile - CloneProfile $ImageProfile - AcceptanceLevel PartnerSupported-name of seller "Centric" - $PROFILEAME
  # Remove the old net-be2net driver package
  Delete-EsxSoftwarePackage - ImageProfile $PROFILEAME SoftwarePackage - net-be2net
  # Add the HP of packages to our new profile picture
  Get-EsxSoftwarePackage-seller "Hewlett * | Add-EsxSoftwarePackage - ImageProfile $PROFILEAME
  Get-EsxSoftwarePackage-seller "hp" | Add-EsxSoftwarePackage - ImageProfile $PROFILEAME
  # Add the AP Agent related packages to our new profile picture
  Get vmware-fdm-EsxSoftwarePackage-name | Add-EsxSoftwarePackage - ImageProfile $PROFILEAME
  # Add the correct driver be2net our new profile picture
  Get-EsxSoftwarePackage-net-be2net name | Add-EsxSoftwarePackage - ImageProfile $PROFILEAME
  # Export the profile from the image of a bundle
  Export-EsxImageProfile - ImageProfile $PROFILEAME - ExportToBundle - FilePath D:\Images\$PROFILEAME.zip

  And finally I apply the profile of the Image to an existing entry or deploy rule, but nothing helped.

  Does anyone have ideas how to debug this problem or should I just open a new case to VMware Support?

  Hello world

  The problem in my case is finally resolved. The issue was caused by not having does not host profile attached to the vCenter level, and I used the IPv4 configuration to deploy on servers of clusters/right. When I did this, the problem has been resolved.

  I had a Support case open while a loooooooong with VMware and happened to find me the solution by running in a line in the documentation Auto deploy GUI (fling) where it says Host Profiles must be attached to the level of the vCenter. Before 5.1 I've always attached to the cluster where they have been applied, and it has never been a problem. However, since 5.1 has obviously changed this behavior, it is now mandatory.

  So just to let you know, my problem with this has been resolved.

  Best regards and I really hope that this solution solves this problem for you also!

  Laurens

• Unable to connect to the server Essbase (error #1051293)

  Hello

  Using Essbase Integration Services Consol, I created a template OLAP, and then click OLAP Metaoutline and even checked. But when I tried to load the members and the data I just had an error that is "unable to connect to the Essbase server: Localhost (error #1051293).

  If any of you have solution for this issue, so kindly help me.

  Saami

  Do you know who your security Admin? Or at least you have access to Shared service URL?

  In LDAP, type your user ID and you see your start-up. Add the new app to your user ID, and you define.

  Essbase Administration Services to help online

• Satellite C660 is unable to start for the first time

  I have a Satellite C660 - PSC0AQ-03C019 + 1B194392K

  For the last year laptop worked fine in the last 2 months, however he had a problem starting. The first starting attempt of the day, it does not start, it is consumed on gets in front of splash screens after the cursor flashing in the top left then hold with a blank screen (not the cursor just a low glow).

  Hold down the power button / turn off and turn on again then the computer will start. sometimes (not always), it will ask to start normally or repair.

  The laptop works perfectly in use does not fall out of mistakes. Restarting the laptop works as expected close and turn on/off after 5 minutes works great.

  If the laptop is left for an hour or more, it starts the same as above. turn off and turn on/off the system will start but with boot normally the question.

  He has not indicated in the error logs files

  I did a full reinstall of HARD drive recovery system.
  I did a full system reinstall from recovery DVDs.
  I did a full system reinstall from DVD disk a hard new recovery.
  I replaced the ram

  I tried to update the bios, but get an error
  BIOS version more than 200
  Battery capacity over 10%
  AC is attached

  Hello

  The description of your problem is, for me, quite confusing, and I do not understand your problem.
  Can your notebook load and start the preinstalled operating system or not?

  Enter the BIOS and set it to default settings. After that restart your laptop and to describe what is happening exactly.

• Unable to start after the cancellation of the updates

  original title: I keep the computer for an update to vista (1 of 16) and now the computer does not restart. Help.

  I shut down the computer for a vista update (1 of 16) and now the computer does not restart. Help.

  Hi Clemsonincola,
   
  1. do you get an error at startup of the system?
  2 have you tried to start the computer in safe mode?
   
  Try these steps and check the result.
  Step 1: Start the computer in safe mode
  a. see start your computer in safe mode
  Step 2: If you are able to start the computer in safe mode, and then restore the computer to an earlier time
  a. Click Start, type system restore in the search box and then in the list click on the system restore program.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  b. in the System Restore dialog box, click on choose a different restore point and then click Next.
  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
  d. click Finish.
  e. restart the computer and check if the problem persists.
  
  See What is system restore?
  Step 3: If you are not able to start the computer in safe mode, and then run the Startup Repair tool and check the result
  a. put the Windows Vista installation disc in the disc drive, and then start the computer.
  b. press a key when you are prompted.
  c. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
  d. click on repair your computer.
  e. click the operating system you want to repair, and then click Next.
  f. in the System Recovery Options dialog box, click Startup Repair
  g. once the Startup Repair tool is completed, click Finish to restart the computer.
  h. remove the DVD and restart the computer to see if the system boots fine.
   
  See Repairs to the system of Windows recovery environment
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to start after the installation of the printer driver

  I have a dell with vista 32 pc I recently replaced a broken with an identical printer printer, but what either the reason society printer when sending to the printer installation instructions sent replacement and this includes reinstalling the driver for the printer, so I followed the directions to reinstall the driver. After all, the n is the desired computer restart, so it was the case, but OS could not open sent me to a silicone black white screen saying there was a problem with windows and does not, and I could launch a system repair or start windows normally. well repair luanching systems but it won't do anything at all and when you try to start normally it's just a black screen with a white bow doubled by a green line through it and now he used to statrt al all? can u help please

  original title: Please help__

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if required:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon. Mick Murphy - Microsoft partner

• The Terminal Server service to start, get the message "system error has occurred."

  I just reinstalled Windows 7 Professional and the first and the only thing I did was performed in the command prompt to enable remote desktop:

  reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server" /v fDenyTSConnections /t REG_DWORD /d 0 /f
  

  netsh advfirewall firewall set rule group="remote desktop" new enable=YesWhen I try to connect via RDP, it does not work and that is because term service is not started nor will it start. I open an elevated command prompt and type "net start termservice" and I get error 5. In services.msc it does not let me start it and it displays an error.
  

  NOTE: THIS MIGHT BE IN THE WRONG WINDOWS TOPIC SINCE I COULDN'T FIND A TOPIC THAT I THOUGHT WOULD BEST FIT MY SITUATION.
  

  On the flavors of Windows that are supported on the desktop remotely, you enable this feature via the control panel / system / remote settings / Remote. There is no need to hack the registry or start a particular service. Then you would see this registry key:

  

  To test the RDP, you can use this command on the host itself:
  Telnet %ComputerName% 3389

  To set a different port number, you must change these registry data:

  HKLM\System\CurrentControlSet\Control\TerminalServer\WinStations\RDP-Tcp\PortNumber

• Unable to connect to the host.   Error: The specified version is not found

  vmrun-t esx h https://192.168.1.123/SDK u root Pei password list

  Unable to connect to the host.

  Error: The specified version is not found

  Any ideas why it does not work?  It is run on a Windows XP workstation.  The target server is on the local network and running ESXi 4.1.  The vmRun version is 7.1.2 and is installed with Workstation 7.1.2.

  I also tried Ubuntu 10.04 with vmRun from a Workstation 7.1.2 installation.  There, he also fails with the same error.

  Note that ESXi 4.1 is used to test installation is not allowed and is running in demo mode.  Management of the vSphere client works without any problem the same Windows XP workstation.

  Any help would be appreciated.  Thank you.

  You must install the full package of VIX by http://communities.vmware.com/community/developer/downloads. It contains only components to manage the workstation. Please note that I had to install in the VIX 1.10.1 order then Workstation 7.1.2 to get both to work on my Windows 7 computer.

• Setting the screen to get started on the applications rather than the Office of startup screen

  I have a HP Pavilion 23 and run Windows 8. Recently my pc has been commissioning on the desktop instead of starting up on the screen to start applications. How can I configure my pc so that when I turn on it goes to the start of applications screen and not desktop screen?

  Denver1003, welcome to the forum.

  You can go into control panel / taskbar and Navigation / Navigation / start screen / uncheck the first element ' when I connect or close all applications on a screen, go to desktop instead of the start.»  When it is disabled, the computer should start to the start of Metro (Apps) screen.

  Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.

• Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

  Original title: Unable to connect to the wireless network

  Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

  I should add that I have tried the solutions of the previous forum on this topic, and none worked.

  Hi Marilynnla,

  Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

  Read this article and follow the steps. Lets see if it helps in any way.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2 (Works for Windows XP SP3 as well)

• Unable to connect to the Internet, receive error message: DEBUGER END WIRE.

  Original title: unable to connect to the Internet

  Hello

  I am using Dell inspiron 1525 with Win.Vista Home Premium 32 bit

  When I connect to internet I displays message DEBUGER CANCEL THREAD

  There is no driver problem

  Someone help me

  I thank & regard

  Satish Baker

  Hi Sissi,

   

  1. you are using a wired or wireless?

  2. do you and changes to the network card or manually change all the settings?

  3 when was the last time it worked?

  4. are you tring to set up internet connection in windows vista for the first time?

  Please follow the links below to solve the problem.

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

   

  See also this: the problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

   

  I hope this helps!