UNABLE TO START THE WINDOWS IN A SINGLE ATTEMPT CORRECTLY

When start the computer dell logo comes after that microsoft corporation will appear for a while then led try glow in keyboard and mouse, suddenly not display with a light black background not driving no light on the mouse and the keyboard, CPU. I have to press the power button for 5seconds to stop and to restart the computer several times to start windows properly. Please someone help

Hello

And the good advice already rec'd, use these tests for diagnosis and troubleshooting of Dell.

Reference Dell troubleshooting with startup problems:

http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_343119

Run the built-in diagnostic software:

http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=266787

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

And if you manage to fix or not to fix these problems, here's how to reinstall with a Dell with Vista if ever necessary.

How ro reinstall from the Dell recovery partition:

http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=DSN_336966

Reinstalling the printer Dell supplied disk:

http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_339949

And if this does not resolve your problem, please contact Dell or their Support Forums:

http://en.community.Dell.com/support-forums/default.aspx

See you soon.

Tags: Windows

Similar Questions

  • Failed to start the Windows Audio Service on Local computer. Error 1053.

    Hello! Last week, I lost all sound elements. When you click the sound icon, I got the error 'there is no available active mixer device. To install mixer devices, go to control panel, click Printers and other devices, and then click Add Hardware . "I'm going through the Add Hardware Wizard, click on that I already added the material and select SigmaTel High Definition Audio Codec. It says "the device is functioning properly." According to Device Manager, the device is functioning properly. When I go to start, run, services.msc and try to start Windows Audio, I get "unable to start the Windows Audio service on Local computer. Error 1053: the service did not demand launch or control in a timely . »

    Can anyone advise me on what to do?

    Hello

    About the message you received, it is likely that your sound driver may be damaged. In this case, try to reinstall the driver.

    You can also go to the website of your computer manufacturer to get the driver. They should have ALL the drivers for your computer model. :-)

  • Need help message' w/error Unable to start the s window media Interface. Make sure you have at least WMP10. »

    I downloaded WMP11 to download another program and I get this message ("unable to start the s window media Interface. Make sure you have at least WMP10. »).  This message appears when I click on the new program and it loads.  As soon as it loads the first program screen appears and displays this error message on WMP 10.  When I click ok it goes, but I can't get the new program to do anything.

    So before asking on the problem of new program, I would like to fix this so it keeps popping up.
    I'm not too calculates saavy so I need clarification.

    Thank you

    Where did you downloaded WMP 11?

    Uninstall WMP 11 and check again the issue. If it stops then reinstall WMP 11.

    http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11

    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=8163

  • Unable to start the service to install under Windows 7, get the error 5 access is denied

    THIS PROBLEM IS RESOLVED (PLEASE READ):
    There was NOTHING on the internet that has helped me. While I thought, on the permissions, and I thought of my C:\ (main one with what you have).

    Here's what I did to fix (this applies to all versions on Windows):

    (1) right click on C:\ (or E:\ whatever one holds your stuff)

    2) go to properties

    (3) under Security, click SYSTEM

    (4) ensure that the SYSTEM has all the permissions on ALL

    NOTE: When you do that on that day will be "cannot give permission to C:\boot (for example)" that's fine, just click continue until it's over

    And I'll put the first response as response so that when people search he said answered

    =========================================================

    I went to Serives.MSC and noticed that my Windows Installer service is not started. When I pressed 'Start' (manual, automatic and automatic (delayed start) to start the service, it said 'error 5 access is denied' I'm an administrator, but it did nothing.)

    I tried many things

    I tried 'net user administrator /active' then go to the administrator (the account) and did the same thing, but he did nothing.
    I tried to make another administrator account, and then did nothing.
    When I type "net start MSIServer" in command prompt (ran as administrator), but it says "error 5 access is denied."

    Hello

     

    Thanks for posting the question in the Microsoft Community!

     

    You cannot start the Windows Installer service and get error Error 5 access is denied.

     

    Have you tried to install or uninstall any program?

    The problem may occur may be corrupted Windows Installer engine.

     

    I suggest you follow the steps mentioned below

     

    Method 1: Re-save the installation service

     

    a. click Start, type MSIEXEC /Unregister. in the search box and press enter

    b. Click Start, type MSIEXEC / REGSERVER in the search box and press on enter.

     

    Method 2: File system (CFS) Scan Checker

     

    SFC scan will find all missing or incorrect system files and repairs them.

     

    See the site:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

     

    I hope this helps. If the problem persists, let know us and we would be happy to help you.

     

  • Unable to get the windows updates. Get error code 80072EFE. Help!

    Unable to get the windows updates. Get error code 80072EFE.  Help!

    Gary,

    ERROR_INTERNET_CONNECTION_ABORTED 80072EFE

    You may experience temporary errors related to connection when you use windows update or microsoft update to install updates http://support.microsoft.com/kb/836941

    by running the Fixit on this page, you can reset to windows update components.  but, if there is malware present, she will continue to reset the connection to the update servers: how toreset windows update components

    suggest you download and save the Fixit.  then conf is the boot vlean system before you run it:http://support.microsoft.com/kb/971058

    How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7http://support.microsoft.com/kb/929135

    Once the Fixit has been downloaded and the system is started in the pure State, check that the native vista firewall is now on if a 3rd party firewall has been used previously.  now run the Fixit and choose the default mode.  restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode.  turn it back on when he finished the race and updates.

  • Windows ICS Services stopped & could not start the windows firewall in windows xp professional sp2.

    I am facing a problem regarding the ICS Service & could not start windows in windows Xp service pack 2 firewall, whenever I have install windows Xp Sp2 and join the network, the ics services ceased and the windows firewall. While windows firewall service starts when I restart my computer. But after some time stopped again had services that I'm cold does not access the readers of part, could not access network resources.this problem occurs only on windows xp sp2, when I install windows 7, then all better.i work fetch on different forums, apply the settings but I'm not able to solve the problem on base all the time. Someone tell me the permanent solution of this problem, on a forum, I see this solution,sharedaccess.reg and settings.but I am still unable to find a permanent solution.

    Someone tell me the permanent solution of this problem?


    Hello

    Here are a few troubleshooting steps that you can try to solve this problem. See the following links.

    You cannot start the Windows Firewall service in Windows XP SP2

    http://support.Microsoft.com/kb/920074

    Registry WARNING: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link:

    http://support.Microsoft.com/kb/322756

    Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

    http://support.Microsoft.com/kb/875357

    If you have additional problems, please reply to this post and we will be happy to help you further.

  • I have a linux operating system and I would like to remove it and install windows xp. I'm afraid that if I wipe the drive, I'll be unable to boot the windows xp disc. Is this true?

    I have a linux operating system and I would like to remove it and install windows xp. I'm afraid that if I wipe the drive, I'll be unable to boot the windows xp disc. Is this true? What is the best way to remove the linux operating system and install windows xp?

    original title: HOW I CAN UNINSTALL LINUX OPERATING SYSTEM

    If there is absolutely nothing on the disk you want, just format the drive and install Windows XP:

    1. start from the CD. You may need to change the first boot to a CD device in the BIOS. To do this, when you switch on the look for a configuration message indicating what key to start typing, F2 and del are commonly used. The message appears for very long and it you miss, you have to restart the computer. In the BIOS, look for a section that contains the boot sequence, change it to CD, save it and let the computer to restart.

    2. the installation sequence is answering the message press any key to boot from the CD, and then press ENTER to set up Windows, press F8 to accept the EULA, delete the partition, press ENTER, type L to confirm delete, type C to create a partition, choose (Quick) format. Then begins the installation and restart will therefore ignore the subsequent message to press any key to boot from the CD-ROM.

    3. actual installation will begin and takes about 30 minutes. Finally, download all the missing Windows service packs and other updates.

  • Windows cannot start the windows Vista Firewall service

    My system is windows vista. When I tried to 'turn on the windows firewall' the message I got was ' Windows Firewall settings cannot be displayed because the associated service is not running. You want to start the windows firewall service? "I clicked Yes and another message came:" Windows is unable to start the service windows firewall. " Then I went "firewall" on the Start button and click on "Windows Firewall with advanced security on local computer" and a message with the error code: 0x6D9 came. Can I get the solution to this problem of anyone in this forum. I will be grateful.

    Thank you

    Hello

    You are running a third part of the internet security solution? Many of them include a firewall that is clean and disable the Windows Firewall. If this is the case, you should first disable this one before the attempt to initialize the Windows Firewall. It is not advisable to attempt to run two firewalls at the same time.

    If you have recently deleted (uninstalled) a third party solution, you may need to run a cleanup this provider of software tool to remove any debris WASTE of this program in order to activate the Windows Firewall.

    Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

  • Bridge CC (64-bit) is unable to start the cache even after several time of virtue. Help! So frustrated!

    Bridge CC (64-bit) is unable to start the cache even after several time of virtue. Help! So frustrated!

    Hi julesmom,

    Please reset the Bridge preferences and then try it.

    Measures

    Start Adobe Bridge, and immediately press Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS down) until the dialogue box reset settings appears.

    Select all three options - reset preferences, reset Standard Workspaces and all miniature Purge Cache - and then click OK.

    Reference: troubleshooting errors, freezes | Adobe Bridge | Windows, Mac OS

    Let us know if it works.

    Kind regards

    ~ Mohit

  • Unable to start the virtual machine after restoration

    Guests including Test host: ESXi 5.1.0.1065491

    Vm problem: 32-bit, Server 2003

    I use Veeam Backup & Restore 6.5 to back up my vm.  I always do a test restore to ensure that my backups are good.  I'm having a problem with a restore.  The 32-bit Server 2003 vm starts just fine on the main host it runs on.  All the vm are 64-bit except for one who is a 32-bit Server 2003 vm.  Restoring the machine virtual and implemented on a host except the 32-Bit vm Server 2003 test.  After restoration and trying power to the top, I get the following error:

    Unable to start the virtual machine.

    Turn on VPCM module has failed.

    Viewed performance counters require version 3 or greater of architectural performance monitoring.

    Anyone know if there is a fix for this problem?

    TIA,

    Mux

    I assume you are using different hardware (CPUs, the BIOS settings) for VMS restored!

    The virtual machine has VPCM enabled, which causes the problem. You can either disable it in vSphere Web Client (you can do this in the vSphere Client Windows), or directly modify the .vmx VM by setting vpmc.enable to "FALSE".

    For how toggle this setting in the Web Client see allow virtual in the Web Client vSphere CPU Performance counters. If you want to edit the .vmx file manually, you need to delete/re-add the VM from the inventory or recharge (see http://kb.vmware.com/kb/1026043)

    André

  • How do I start the Windows recovery environment (WinRE)?

    Hello

    I have PLUA1E Satellite Pro U200 - 02802QS with Vista Business 32 - bit and the WinRE partition.
    How do I start the Windows recovery environment (WinRE)?
    I mean what key should I press during the boot process for Windows re menu?

    In my Satellite Pro A300, the F8 key during startup will run the recovery of HARD drive partition.

    Hope it's the same on your.

    Or do you possibly mean the recovery of Vista Business environment. Accessible through the Control Panel, system image recovery?

    / Torbjörn

    Post edited by: ssstsg

  • A small flag appears on the bottom of my screen that says activate security service Windows, but when I try to turn on it says could not start the Windows security service

    Original title: HELPPPPP

    My computer a little flag in the background with a x... said red it turn security service windows, but when I try to turn it on... it said windows security service cannot be started :/

    Hey ChelseaHarris,

    Take a look at two responses in the thread below the link to see if they allow the Windows launch security service:
    Could not start the Windows Security Center service.

    If these steps do not help, try to run a full scan using the Scanner from Microsoft which can be downloaded using the link below:
    Microsoft safety scanner

    Hope that helps.

  • "WindowsUpdate_80070641" "WindowsUpdate_dt000"_"WindowsUpdate_00000641" "WindowsUpdate_dt000" __Windows could not start the Windows Installer service on computer local error 216:0xd8

    I have a 64 bit Windows 7 PC and cannot install updates.  Here are two screenshots.

    One contains two error message that I get when trying to update

    "WindowsUpdate_80070641" "WindowsUpdate_dt000"
    "WindowsUpdate_00000641" "WindowsUpdate_dt000"

    The second erorr is what I get when you try to start the Windows Installer Service.

    Windows cannot start the Windows Installer service on computer local error 216:0xd8

    I follow several steps that are listed in the web pages of solving problems.  Tried to make own reboots, use the Microsoft Fix and it does not detect any problems.  I tried to install Windows Installer 4.5 and I get a message telling me that this update is not applicable to your computer

    Please notify

    See if this ad helps-

    http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/213770d0-e94b-43B4-9ff6-99e6366b556b

    TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

  • I am unable to access the Windows XP updates and unable to set up the automatic update. I have not given an error code. I was only told I can't perform these functions.

    I am unable to access the Windows XP updates and unable to set up the automatic update.  I have not given an error code.  I was only told I can't perform these functions.  I don't have the windows disk that the computer came preloaded with Windows and I don't remember the Administor password I created 5 years ago.  Can anyone help?

    Assume that:

    http://support.Microsoft.com/kb/316524

    You receive an error message 'Administrators' only when you try to visit the Windows Update Web site or the Microsoft Update Web site

    http://support.Microsoft.com/kb/189126

    Microsoft's strategy concerning lost or forgotten passwords

    What I can offer: http://support.microsoft.com/kb/321305

    How to connect to your Windows XP-based computer if you forget your password or if your password expires

  • I reinstalled Windows XP service pack 2-64 bit and now I am unable to get the Windows Update

    I reinstalled Windows XP service pack 2-64 bit and now I am unable to get the Windows Update. Updates are more automatic since the installation and now I get the following message if I try to update manually. Help!

    The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

    For self-help options:

    To support options:

    SP3 is only for 32-bit versions of Windows XP. OP has the 64-bit version of XP Pro...

Maybe you are looking for

  • That means "bad connections" warning to the average of the Mail account setup?

    The Mail account setup dialog box, the works of autodetect IMAP, but after clicking "Done", a warning is displayed (see image), declaring "Thunderbird may allow you to get your mail using the supplied configurations." However, you must contact your a

  • Zebra TLP 2844 printer

    Hello. I need to print a serial number using the zebra TLP 2844 printer. I am connected by USB, as I don't have serial port and parallel port. I could print my serial number using the tools of Zebra printer (see the screen shot for more details) with

  • How much noise is expected on 6353 digital output lines?

    I'll send a signal to pass a set of relay reed with the port on a pci-e 6353. When the line is low, the noise is ~ 10 mV. When it is high, the noise is ~ 30-40mV. The noise seems to be done through the signal lines in the reed relays. What is the lev

  • parse xml timestamp labview in javascript

    Hi, im reading XML files created from labview7.1 with javascript and it works fine, the only problem is that I don't know how to parse the timestamp. For DS ... Date of Eximination 4 0 0 -916291696 0 ... should be the date of 2011-01-24 and ... Date

  • I accidentally deleted my qualcomm atheros drivers

    Hello I have a V5 571 and I accidentally deleted the Qualcomm's atheros drivers. I use Wifi only so I can no longer connect to the internet. Where can I get the drivers from to restore this back to normal?