Unable to update firmware for the PERC 5 controller / i on PE1950

We have 6 PE1950 server with SAS PERC 5 / i integrated RAID controllers. Dell OpenManage complains about being obsolete PERC firmware. 2 servers I currently have running, firmware 5.2.1 - 0062 and 5.1.1 - 0040. I downloaded the latest version of 5.2.2 - 0072. I tried the update by the Windows package and who did not, and he complain about the OS being too recent. A server is Windows Server 2008 R2 and the other Windows Server R2 2012. So, I created a BACK USB key with Dell hard drive files and run update.bat. Who failed on both servers with the following errors:

Firmware doesn't have flash. Stop!

Failed to update Firmware for controller 0

The process of updating of the firmware of the controller does not have!

Both servers had the exact same mistakes as described above. Ideas on how I can get the firmware update successfully? I checked the package I downloaded is for the PERC 5 / I integrated.

It's here (if that will allow me to post a link):

www.dell.com/.../DriversDetails

Hello

Try this updated version and see if it works. He said that it was for the 1950s.

Tags: Dell Servers

Similar Questions

  • Y at - he liked an update firmware for the sansa clip

    If I use the sansa updater it detects it as a normal element and gives me a firmware to install, one that ends in 32 I think, but if I install what I think ill ruin the clip, so I ask if a firmware update for the clip more were released, I got V01.01.05A firmware now

    No update firmware at the moment; you have the most recent.  If/when an update of the issues, it is likely is displayed as a sticky thread at the top of this forum.

  • Y at - it updated firmware for the m3 RX100

    Sony makes updates firmware for their cameras ie; RX100 m1/2/3, like to know before you buy one. Many sites seem to believe that it is rare that their cameras updated firmware. Cheers in advance

    Hello Oriley59,

    There is no update firmware, but made for the three models RX, you talked and it is difficult to assume that an update will be released soon.

    If my post answered your question, please mark it as "accept as a Solution.

  • Updates firmware for the isa550w

    y at - he's going to be more updates of firmware for the isa550w or a cisco decide to stop making the deadline of November 14, 2014? I know that this product is reached it's end of life cycle soon not if cisco decides to make the updates of firmware for this product earlier than November, it would be good to know

    link to your solution two to the following: -.

    http://www.Cisco.com/c/en/us/products/collateral/security/small-business...

  • updated firmware for the clip and clip +.

    Hello

    I have an old Clip 4 GB firmware v 01.01.29A and a Clip + 8 GB firmware v 01.02.15A. I see that these are outdated versions and newer versions are available. I've never updated the firmware, so I was reading the messages to see how. Here's my question; I read that to remove FM Radio you should 'drop' the 'A' in the update. I see that the updates do not have the letter 'A' affixed. This doesn't mean no FM Radio more if I update the firmware for both of the clips? I don't want to lose the radio.

    Thanks in advance for any help

     

    I wouldn't bother with updating the Clip +. There is very little has changed since the version.15. It's the one I always use on mine.

    No, you won't lose the FM radio by updating the firmware. You must have read some old posts.

  • The updated firmware for the hp1606dn will be available for MacOS?

    The latest version for MacOS install is not 20120130 as requires it the "critical update for HP.

    Hello
    We downloaded the latest version:

    Exit the: 14-02-2012
    Version: 20120130

  • Update firmware of the iDRAC for M600 with image

    I need to update the firmware of the card server iDRAC to 1.65 and the means to do it now are updates that require you to run on the host computer, operating system must be windows or Linux. I have two servers that have no operating system on them so I can't update this way and it's silly for me to install or run an operating system on each of these just to install an update of firmware for the DRAC. I have also four other machines where the windows exe is not update the map because while it starts the update that he do not say the map isn't here even if before it was said to go ahead with the update, he identified the card and its firmware version.

    I'm referring to this thread already http://en.community.dell.com/techcenter/blades/f/4436/t/19472174.aspx and the person who asked where they could get the image never replied and I could really use the image to solve my problems.

    Thank you for your help.

    Thank you

    There is a way you can get the image of windows exe file. Follow step to get the file from the image below and try to update through GUI

    1. Rename the Windows .exe to .zip file
    2. Extract the .zip file to a folder
    3. Download the image file the payload of the extracted file folder iDRAC (filename: firmimg.imc)
  • Cannot find the latest firmware for the Toshiba 40TL838G

    Hello

    I am trying to download the latest firmware for the 40TL838G model, but I'm not.

    Where can I find it?

    Thank you.

    The same has been asked in this thread
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=73914

    We can receive the update only via a network update
    In which case you will not receive updates via the network, your firmware is up to date.

  • Firmware for the Alpha A65

    What is the latest firmware for the A65 Alpha as of February 17, 2013

    From this date, Version 1.07 is the last update of the firmware for the camera I AM-A65V. It can be downloaded from the Sony eSupport at http://esupport.sony.com/LA/p/model-home.pl?mdl=SLTA65Vsite.

    If my post answered your question, please mark it as an "accepted Solution". This will allow users to more quickly find verified solutions.

  • Satellite Pro A300 PSAG9E - unable to update firmware

    It has come to my attention that my laptop will not install updates of the firmware.
    I tried all updates firmware on the Web from Toshiba site and on-site support for other countries but still no luck.

    My laptop is a series of Satellite Pro A300 PSAG9E and when I try and install a firmware update a box telling me it's not compatible with my system.
    I checked the version proposed by the pdf file and I know that it is the basic version before the update, and I'm sure I have install the correct way of m.
    So I don't know what goes wrong.

    Does anyone else have this problem or knows something that could solve this problem? Because I'm at a total loss.

    Thank you

    Hello

    The European driver Toshiba page provides three firmware updates;

    _UPDATE for drive_ TS-L632
    + Changes have been made in order to correct the following: +.
    + Impossible to burn songs on iTunes to some CD media. iTunes error "the attempt to burn a disc fialied. An unknown error occurred (2131)"is displayed. +

    _UPDATE for drive TS-L632P TO02_
    + This firmware solves some problems in the optical disc drive. +

    _UPDATE for TS-L632H drive TO03_
    + This firmware solves some problems in the optical disc drive. +

    You have a TS-L632P and TS-L632H drive?
    Isn't it? Then you cannot update the firmware.

  • bugs in firmware for the photo frame digital df800b2

    http://h30434.www3.HP.com/PSG/board/message?board.ID=Other1&thread.ID=47>

    I have the same frame and the same question!   I tried the solution and it did NOT solve my problem.  Pictures are not displayed in sequential order (they jump around a bit in sequential mode).

    used file names...

    001_MG_2755.jpg

    002_MG_2756.jpg

    003_MG_2757.jpg

    004_MG_2758.jpg

    ... etc...

    By any measure, these are sequential file names!

    I understand that there is a firmware update available, according to the comments on other forums.  Can HP please post the updated firmware for this forum or PM it me at least?  There are many bugs in the firmware originally supplied with the chassis and I think HP should blithely seek to make their customers happy with the purchase of HP products!  This firmware update should be available.

    My framework model is "df800b2-16".  I can provide S/N on request email from HP, if that's what it takes.

    ----------------

    As an experiment, I even changed all the names of the file 001.jpg, 002.jpg, 003.jpg... etc.

    He still jumps around (jump 2-3 images back anyway - not 100% sure how, but clearly to jump some photos) and about runs in the REVERSE order. (Top number first!)

    This is clearly what is expected in a "sequential" display of images!

    ------------------

    Next experiment was to 10 images with the name of the file (number) on each image... 001.exe jpg by 010 jpg file names.

    Value sequential mode, 5 seconds interval, no transition, read CF card, I get the following "sequence":

    5,4,6,3,7,2,8,1,9,10, 5,4,6,3,7,2,8,1,9,10... (repeat this pattern - sequential sentence!)

    Please send/post fixed firmware!

    Appreciated your fast response!

    Finally got solved... see this other thread:

    http://h30434.www3.HP.com/PSG/board/message?board.ID=Other1&message.ID=514#M514

  • Apple created a new update ios for the iphone 4

    IPhone 4 stuck in ios 7.1.2. Ios need 8

    Apple created a new update ios for the iphone 4?

    No, they won't. If you use a later version of the iOS, then you will need to buy a new phone.

  • Need new firmware for the drive (Mat * un UJDA750)

    I have a Satellite M30 with a carpet * a player combined UJDA750. Anyone know where I could get a new firmware for the drive?

    THX.

    Hello

    I put t know why you need a firmware for your combo drive.
    As far as I know the carpet * a combo UJDA750 driver works with the Windows driver very well.

    Good bye

  • A security update cumulative for the ActiveX for Windows Vista (KB973346) cannot install stop bits since 15 July 09

    Hello

    I am using Vista Home Basic, but receive an error code:

    A security update cumulative for the stop bits ActiveX for Windows Vista (KB973346)

    Installation date:? 22 /? 08 /? 2009 12:32

    Installation status: failed

    Error details: Code 80242FFF

    Update type: Important

    Security issues have been identified in ActiveX controls that could allow a malicious user to compromise a system running Microsoft Internet Explorer and to gain control. You can protect your system by installing this update from Microsoft. After you install this item, you may have to restart your computer. This update is provided and authorized under the Windows Vista license terms.

    More information:
    http://go.Microsoft.com/fwlink/?LinkId=157386

    Help and Support:
    http://support.Microsoft.com

    Help, please?

    Thank you

    Hi Someonez,

    Error code 80242FFF means ' unexpected update generic Manager failed.
    So, I think that your windows update client could be damaged.

    Try to run the application on the following url fixit.
    http://support.microsoft.com/kb/971058

    Kind regards
    DFT IM me -TWiTTer: @DFTER

  • When comes out the next firmware for the "rocket"?

    When comes out the next firmware for the "rocket"?

    Sometimes in the coming months

Maybe you are looking for