Unable to write to the network drive

Similar Questions

• How to get permission to write to the network drive access?

  I installed a reader Networks to connect it to my router. It works very well for retieving files, but I can't write to it. I get a message saying "You must." authorized to perform this action

  Samsung computer laptop brand new, 6 GB RAM, CPU Intel Sandy Bridge, E4200 of Cisco router wireless.

  Everything works fine, except my network (3 sheets) drive. I find it impossible to write to it in WIndows Explorer. I can, however, open any type of file off the drive.

  I want to back up my computer to the hard drive, so please HELP!

  Hello

  You can check out the link below and provide a complete control on the network drive.

  What are the permissions?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-permissions

  Troubleshoot "access denied" when opening files or folders

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

• Unable to connect to the network drive

  So I recently installed Lightroom (4.4) on a Windows 8.1 machine. I had already used Lightroom on OS X, storage of the photos on a NAS and the catalog locally.

  I copied on the Mac catalog and opened it in Lightroom on Windows and everything seems to be in order, showed the photographs and names, adjustments, sides, etc. are all in order except for one thing: the files. All the photos were "missing." I went to locate the missing on the NAS folder (which is perfectly in focus - Windows Explorer can read/write everything on it) and selected the folder. The window closes, but nothing happens, and everything is still marked as missing.

  To solve this, I tried restarting Lightroom and to create a new catalog to import photos (metadata is stored on xmp). I'm able to hit the + and select "Add a network Volume" and go up to locate the folder with photos, but when I hit OK I get error: unexpected error executing the command: bad argument #1 the 'pathIsOnNetworkVolume' (string expected, got the draw)

  

  I tried Googling the error and the variations of it, but absolutely got nothing. I'm afraid that it is something that has not been experienced before?

  Thank you

  -Conrad

  Figured it out. In case someone else get to it with the same problem, the problem is that Lightroom can't use photos accessed via FTP. The solution I found was to use a different protocol (NFS) and everything was fine.

• No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

  No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

  Hello

  Know what type of network card you have and download the drivers of its supplier.

  It doesn't matter what it is always a good idea before re-install/upgrade to log on to the computer support page, download independent drivers from there and put them on a flash drive.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• on startup, I get the message, unable to connect to all network drives

  at startup I get message (unable to connect to all network drives) I use windows 7, intel i3, 64-bit and ie9.

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Method 1: Perform the steps from the link below and see if it helps.

  Programs may be unable to access some network locations after you turn on user account control in Windows Vista or in Windows 7

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  Method 2: Click on the link below and see if it solves the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Networking/cannot-reconnect-all-network-drives/5c5a4492-1634-4479-91f9-b4d2763b31d2

  Hope this information helps.

• Access to the network drive. Unable to drag files to USB

  I can see the files on the network drive, but when I try to drag the file to a USB drive it. He said that problem access the hard disk, but I can open the file on that...   Any ideas would be appreciated

  Hello

  1. What is the exact error message that you receive?

  2 have you tried copier\paste manually?

  I suggest copier\paste manually the files on the USB drive and check to see if the same problem happens.

  You can also check this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-file-and-printer-sharing

  It will be useful.

• Unable to connect to the network "\\localmachine\sharedname" share

  I use VMware vCenter Converter Standalone client, v5.0.0 build-470252, running on a 64-bit Windows 7 computer, try to import a Windows 2008 computer virtual (hosted by VMWare infrastructure) on my local machine.

  At the start of the converter, I have "connecting to a local server.

  Specification of the source system is OK, even if I don't know the certificate error.  The conversion wizard installs his agent and it connects OK.

  To the Destination System, I said:

  
  Type of destination: VMware Workstation or other virtual machines to VMware
  Product VMware: VMware Workstation 8.0.x
  Information on the virtual machine:
  Name: same as the source system, such as detected by the converter
  Location for the virtual machine: \\localmachine\sharedfoldername
  Username and password: my Windows 7 credentials, with full control over \\localmachine\sharedfoldername, the action and the underlying folder.

  "When the converter checks the destination settings, it is reported: unable to connect to the network"\\localmachine\sharedfoldername"share

  So far the measures of investigation:
  -Connection to the share through Windows Explorer works fine; It is possible to write to the share

  -J' tried specifying the share as '\\localhost\sharedfoldername', but get "the share specified network 'localhost\sharedfoldername' does not exist."  It was a bit of a long shot, I guess, but the form does not work in Windows Explorer.

  -Have you tried with the file and print sharing both power - on and off seemed worth a try after looking at other posts on this forum

  The help says 'If you are connected to a local Converter Standalone Server, providing a network path or a local path to the destination directory'.  I tried the local path "C:\Virtual Machines\sharedfoldername", but got the message "error: specified as a (local) drive Destination.»  "Please specify a UNC path such as: \\machine\sharename.

  Aid also States "You have not to provide user credentials if the location is on the local storage of the machine where Converter Standalone server running."  However, the next button is always disabled until credentials are provided.

  Can anyone help please?

  You must be able to access the \\localmachine\sharedname of the * SOURCE * machine. The job of conversions P2V of Windows is to install an agent on the source, then the agent connects to the target (this is why it must be on a network share) and transfers the data. You can browse \\localmachine\sharedname of the source (but not where the converter is installed)?

• Vista Home Premium cannot perform backup on the network drive

  Fairly well described in the title... asks for a password. no password required on each pc. Seems to be a known problem based on the messages I've seen. Is there a fix. ???

  Unstable1

  Thanks for posting on this Forum.

  What applications do you use to make your backup?  You use the Configuration and status of the backup program that comes with Windows Vista or the backup center and restoration?

  Is it a home network?  If so, all computers have the same name of "workgroup"?  As you may know, the same name of user and password must be on all systems that are part of a working group.  You are able to "navigate" to this network drive?

  If the network drive (part) belongs to a Windows domain, make sure that you have the appropriate rights to write to this drive (Share) network. Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't use windows Explorer or the network drive mapping to access my NAS drive more.

  original title: strange NAS problem

  Hi everyone I can't seem to fix this strange problem.

  I can't use windows Explorer or the network drive mapping to access my NAS drive more.
  I am running windows 7 Professional 32-bit on my PC, and until about a week ago she accessed from my PC very well.

  The location could not be reached and have not been able to run since said today that I went to update it and the drive mapped. I'm at my wits end.

  Here is some info.

  I can access to other computers and devices on my network.

  I can access the internet.
  I have a windows XP PC in the House who can always connect to my fine NAS drive (even if it's not mine).
  I PING the NAS drive.
  The NAS drive will do the same if connected via cable or by wireless.

  UPDATE: after the implementation of a shared folder on a Windows XP computer on the same network I am also unable to acsess the part of my PC. So I can assume that I can't browse all share folders or NAS drives on my local network.

  Help, please.

  Thanks for the help, but I fixed my problem

  Here's what I did in case anyone wants to know.

  I went into Device Manager and went to network adapters.
  I then expanded this section and under view changed to display hidden items.
  Several hundred elements appears (for most 6to4 adapters) and I deleted all the.
  Then click scan for new hardware.
  And... everything works again! YAY!

• Can't deleted iPhoto Library the network drive backup

  I made a backup of my library iPhoto on a network drive. Since then, I realized Time Machine made a better job of backing up my iPhoto library. So I planned to remove the library for free space.

  When I try, I get this message:

  "The operation cannot be performed because you have not granted access to some of the elements."

  If I can spend in the library and digging around, I find there are hundreds, maybe thousands of articles where I don't have permission. Y at - it a way to replace that can simply remove the library?

  Which does not imply iPhoto somehow - maybe you can get help from the forum for your operating system, but most likely, you need support from the supplier of the network drive - this is the question is

  I would ask that your post moved to the captain El forum and see if some one can help

  LN

• I'm trying to update my ipad (first edition) to the new version and after about an hour, I get a message that says unable to finish because the network has expired.

  I'm trying to update my ipad (first edition) to the new version and after about an hour, I get a message that says unable to finish because the network has expired.  How can I fix it?

  Original title: network programs network networking Internet Web site Site Web Web Site URL

  Hello

  You need to support iPad not Microsoft.

  iPad - media choices
  http://www.Apple.com/support/

  iPad - Support
  http://www.Apple.com/support/iPad/

  iPad - communities (Forums)
  https://discussions.Apple.com/index.jspa

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Cannot access the network drive or impossible to mount the network drive. Error "network path was not found.

  Original title: network path was not found

  HI, after the upgradation from windows xp sp2 to sp3 (next to the customer) I can't access the network drive or impossible to mount the network drive. ' ' It showa error "network path was not found.

  Hi gauravadavadkar,

  Thanks for posting your query in Microsoft Communities. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  ·         Work on a domain?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with networkand check if the problem persists.

  S tep 2: if the problem does not persist in safe mode with networking, perform a clean bootto see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the steps to configure Windows to use a Normal startup state section of the article to start the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  (d) when you are prompted, click restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  In Windows network connection issues

  You can read this article for more information:

  Windows wireless and wired network connection problems

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• Store music on the network drive?

  I am considering a Director to play my music (mp3) stored on a shared network (NT) drive library. The Director can access music stored on the network drive and not on a PC? I don't want to have the PC on when I listen to music. The media to be installed and running server software need a PC for the Director to work? or the Director can access \\DRIVE\DIRECTORY?

  Thank you.

  Ah, so you're saying the multimedia files are on the USB drive connected to your WRT610N? If so, then you don't need a computer or power from the router itself already has a built-in Media Server (Twonky Media Server), which can share the multimedia files on the USB drive to your network.

• To remove the error message about the network drive

  I have W7 Home and recently restructured.   I had this problem of reformatting finally a long time ago and it is solved but do not remember how.  Whenever I boot, I get the message "connection impossible network drives.  When I click it, I see the Epson printer has a red X on it and says Epson memory card.  The printer has always shown in my computer, but it works very well.  All I need is to get rid of the error message.  I tried to go into the center of the Action and unclicking on error messages of network firewall but that did not help. I'll print on any solution this time for the next restructuring!  Thanks for any advice.

  Epson support says that since the printer connecting wireless much later that opens Windows, Windows is not see when it starts.  They say that it is a Windows problem, not them.

  To get rid of the error message, I disconnect a right-click on my computer and clicked on the network drive.  I find the error message disappeared and the printer works fine.  I don't know if there's a problem with that.

• My computer has virus of the FBI, I wiped it is clean but now it cannot connect to intermet because it can't find the network driver how can I find it?

  My computer has virus of the FBI, I wiped it is clean but now it cannot connect to intermet because it can't find the network driver how can I find it?

  Since you have formatted the PC and reinstalled Windows, your question will be handled better in the hardware forum space and drivers for Windows 7, so I'll move it there.

  Apparently, you need to install the driver of your PC network. If you used the CD to restore the PC manufacturer that should have been included, but it may be on a 2nd CD with drivers and programs.

  If not, the first thing to do is contact the PC manufacturer to see if they have a driver available for download. If the PC has a wireless network card and wired, perhaps one has been configured, but not the other and you try to use the not yet detected and installed.

  -steve