unauthorized access

Similar Questions

• After the upgrade to Windows 10, I was not able to access my email to Outlook Web Access. I get this message: error HTTP 401.2 - Unauthorized: access is den

  Firefox stopped 40 access Outlook Web access, a week ago. I always get the following message:

  You are not authorized to view this page
  You have no permission to view this directory or page using the credentials you provided as a Web browser sends a header field WWW-Authenticate the Web server is not configured to accept.

  Please, try the following:
  Contact the Web site administrator if you believe you should be able to view this directory or page.
  Click the Refresh button to try again with different credentials.

  Error HTTP 401.2 - Unauthorized: access is denied due to server configuration.
  Internet Information Services (IIS)

  Technical information (for support personnel)
  Go to Microsoft Product Support Services and perform a title search for the words HTTP and 401.
  Open IIS Help, which is accessible in IIS (inetmgr) Manager and search for topics titled words of security, authentication and Custom Error Messages.

  Thank you for your help.
  Najib

  Firefox 40 change something that affects authentication: is no longer, it appears a name of user and password dialog box to prompt for credentials for embedded resources if they are hosted on a different server. These can include a framed page, an external script or an image, for example.

  If you right-click on the error page, "This frame" appears on the menu? If so, who might follow and Open Frame in a new tab to see if it is hosted on a different server? If you reload the page without frame, it works normally?

  If you are unable to work around the problem by unframing page, you can undo the change as follows. Of course, please be wary of this guest appearing on other sites where it can be to get you to reveal your credentials to another site.

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste auth and make a pause so that the list is filtered

  (3) double-click the preference of network.auth.allow - subresource-auth and edit the 1 to 2, and then click OK

  • 1 shows the dialog box logon only for pages framed, images, etc., hosted on the same site
  • 2 allows the connection to pages dialog box framed, images, etc., hosted on any site

  -What changes anything with your OWA server? If not, you can restore its default value definition; It must be something else.

• my account has been temporarily blocked during an investigation of unauthorized access and now I can't connect to or re: access my account

  I created this account so that I can post this question on my real account associated with xbox live gamertag "kookamango" that is blocked.

  So far, I've dealt with xbox live support, which all have confirmed that this problem is not solvable on their end. My last support Xbox Live call reference number is 1160762648
  My account has unauthorized access and fraudulent charges have been made. The situation has been studied, and my money was refunded to me. The number of service request for the investigation of fraud was 1160762648. My account has been blocked in the investigation and is still blocked even if the investigation is completed and I was sent my email account recovery. Despite the reset my password several times and multiple recovery emails, I couldn't again access to my account, because he always goes to a window saying: "your account has been temporarily blocked."
  Please unblock my account windowslive

  Hello

  By facing the problem with Windows live account, it would be better to post the same question in the Windows Live Solution Center for assistance.

  Windows Live Solution Center: http://windowslivehelp.com/product.aspx?productid=10

  For more information, see the following articles:

  http://support.Xbox.com/en-us/Xbox-Live/how-to/Xbox-Live-account-management/home

  http://support.Xbox.com/en-us/Xbox-Live/how-to/Xbox-Live-account-management/manage-Live-ID

  Hope the information is useful.

• my hotmail account has been blocked due to unauthorized access and I get no answers to the recovery information I supply__

  my hotmail account has been blocked for almost 2 weeks due to unauthorized access and I get no answers to the recovery information that I supply

  Hello

  This forum deals with aspects of electronic mail on your computer network.

  If the problem related to the Live mail Server, or configure the features of the software, you'll do better by logging and displaying the question on Live Mail support forum.

  My moderator tools cannot transfer messages on the forums of Windows,

  Please re - ask your question on the Forum Windows Live,

  The home page of Windows Live Support
  http://windowslivehelp.com/

  Hotmail Forum

  http://windowslivehelp.com/forums.aspx?ProductID=1

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• ORA-20001: unauthorized access (package for the undefined security group variable).

  I'm creating an application that uses the authentication of the APEX and characteristics (work) registration and forgot password forms (does not work).
  
  My I forgot the password is public (requires authentication). The user provides the user name and a secret answer, which are validated and then provides the new password. I try to use htmldb_util.reset_pw to reset the password of the user, but it does not work.
  
  I have a process on the new password page call a PL/SQL anonymous block that looks like this (see below), where username = P16_ITEM1 and P18_ITEM1 = new password.
  
  BEGIN
  apex_040000.htmldb_util.reset_pw (V ('P16_ITEM1'), V ('P18_ITEM1'));
  END;
  
  I don't know how to send a message of success/failure of such PL/SQL block to the APEX, but that's a separate issue, I guess.
  
  In any case, during the trial through SQL Developer as the user with APEX_ADMINISTRATOR_ROLE, I get the following error:
  
  ORA-20001: unauthorized access (package for the undefined security group variable).
  ORA-06512: at "APEX_040000.WWV_FLOW_FND_USER_API", line 22
  ORA-06512: at "APEX_040000.WWV_FLOW_FND_USER_API", line 1220
  ORA-06512: at "APEX_040000.HTMLDB_UTIL", line 1253
  ORA-06512: at line 8 level
  
  I've searched previous discussions and tried different suggestions with no luck.
  
  I'm on Oracle DB 11g XE and APEX 4.x.
  
  Any help will be appreciated. Thank you
  
  Alex.

  In any case, during the trial through SQL Developer as the user with APEX_ADMINISTRATOR_ROLE, I get the following error:

  ORA-20001: unauthorized access (package for the undefined security group variable).

  When executing code outside the Apex which depends on the security defined Apex group, perform the following steps before your own code:

  wwv_flow_api.set_security_group_id(apex_util.find_security_group_id('YOUR_SCHEMA_NAME'));
  

  Google "wwv_flow_api.set_security_group_id" for more details, like this blog:

  http://www.easyapex.com/index.php?p=502

  -Morten

  http://ORA-00001.blogspot.com

• Unauthorized access to webcam

  So I installed an antivirus on my mac to air that has some features to prevent an applications or websites to use the webcam on my Mac when I do not know and I discovered that whenever I opened an AppStore strives to access my webcam and this attempt is blocked and reported by my antivirus

  So I would like to know why some applications on my mac system access my webcam without my permission and which data are collected in a way?

  I am not really concerned about privacy, but I think I must know, understand, and control what my system, because it really violates my rights of confidentiality and security

  Remove the antivirus software. It is worthless. You're not spying.

• Mozilla say unauthorized access when I connected the site of ti

  'When Iconnect to the Web site of the browser display error messege 'ALLOWED ACCESS'

  What website?

• Unauthorized access from another computer

  I found "Account unknown" as an additional user profile. I believe that my nephew has access to my computer from his computer. I was online and I started while he was on his computer. If I'm on my laptop and it is not on his computer, my laptop works very well. As soon as it connects to his computer, then my laptop runs slowly. According to me, he is accessing my computer somehow. I use Windows XP Home Edition, Version 2002, Service Pack 3. I have the disabled guest user and I have a password to log on to my laptop. Do you know something about the conversion from FAT to NTFS disks? My laptop is not configured for networking and authorize remote assistance is disabled (not allowed). Is it possible that I can see if his computer access my laptop? Thanks in advance for your answer.

  Looks almost like it's using Remote Desktop, but XP Home does not allow that.

  Since you have XP Home Edition, file sharing Simple is applied and remote users can authenticate only as long as the user "guest".  You say you have 'Off' Guest user  How did you do that?  If you did it in the user control panel, which does not disable access to the network - only for interactive access.  To really disable the guest user and deny access to the network, you must open a command prompt window (start-> Run-> "cmd") and enter the command:
  NET user guest / active: No.

  Another approach would be to put a password on the guest user:
  "Set up the password for the user in Windows XP"
    <>http://support.Microsoft.com/kb/555520 >

  You must also make sure that the user 'administrator' built-in gave a password as well, or it may log and undo what you've done.  Also check the "Administrators" group and ensure it doesn't have access to one of the accounts listed there.  List of the members of the Administrators group, open a window to prompt as above and enter the command:
  net localgroup administrators
  which lists all of the users in the Administrators group.

  To see who is connected to your computer, right click on 'My Computer'-> manage-> user Sessions

  A "Account unknown" user profile means that a user who has used to have a profile has been removed from the machine.

  About FAT to NTFS:
  "How to convert a FAT16 or FAT32 of NTFS volume in Windows XP"
    <>http://support.Microsoft.com/kb/307881 >

  HTH,
  JW

• Unauthorized access to the administrator account

  Original title: my stepson accessed my account

  My wife and I are defined as administrators for our computer. We have children accounts set up as limited. Last night, my old stepson of 16 said he knew our password and it did. I don't want him on our behalf! How is this possilble and how can I stop this happenning again?

  Hello

  You can change the password for the account and ensure that it cannot access the administrator account. Change password for the user account

  1. click on Start orb

  2. go in Control Panel

  3. Select the category of user account and parental control

  4. click on user account

  5. click on change password

  6. follow the on-screen instructions

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• JavaScript alert unauthorized access to &lt; url &gt;

  I get this error message and don't understand why I get it because I think that I put in the access parameter in my config.xml file correctly.  Here's the relevant section of the config.xml file:

  ================

  <>ermissions >
      <>Ermit > access_sharedermit >
    ermissions >
   
   
   
   
   
   
   
  ================

  There seems to be a lot of messages saying this:

  http://www.Sencha.com/Forum/showthread.php?268724-access-to-quot-CDN.Sencha.com-...-Sencha-touch.CSS...

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/JavaScript-alert-URL-not-allowed...

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/js-popup-access-to-URL-not-allow...

  Here's what the error looks like:

  

  FYI, which actually look like this doesn't work either: Pei

  
     
   

  <>ermissions >
      <>Ermit > access_sharedermit >
    ermissions >
   
   
   
   
   
   
   
   
   

  I posted this on the forums of Sencha so.

  The issue was that is not a URI (I thought by specifying that it this way will automatically get the SSL and non - SSL URLs):

  It works:

  And this also works:

  subdomains of http://CDN.Sencha.com"="true"/ >
    subdomains of https://CDN.Sencha.com"="true"/ >

  But still weird that this great substitution does nothing... you would think that it would help:

  
     
   

• Unauthorized access admin on VPN 3030.

  Hello

  ACS 4.1

  2 x 3030 concentrators ver 4.7

  I have problems with administrative access to our backup c3030 VPN via GANYMEDE.

  Scenario: We have a live and a c3030 backup. They will be configured VRRP failover in case of failure on the direct c3030. The direct c3030 is enabled on GANYMEDE and all access is fine.

  According to the doc cisco here:

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2284/products_configuration_example09186a0080093fe0.shtml

  .. .privilege level is set to 15 on the admin on the c3030 user as well as on the GANYMEDE group, as I have said - everything works fine on the direct c3030.

  I now backup c3030 added the same device group of GANYMEDE network and configured the c3030 with exactly the same setup ACS as the direct c3030. We can log to the backup c3030 via GANYMEDE, we cannot access the admin section and get the error "you don't have sufficient permission to access the specified page.".

  This was curious me for quite awhile, it there's nothing I can find on the web and short to wipe the backup c3030 and back that I'm not sure that there is something we can do?

  I hope that someone out there encountered this problem?

  See you soon.

  I wanted to make sure was, when we try to connect to VPNC (backup), the newspaper of Pass that we obtain NAS IP address as private IP of the interface on the ACS reports. It is, then that's fine.

  This may sound weird, if you have multiple local users on VPNC with 'same' privilege level, change them at the level of different privileges and keep admin 15. And then try again. I think you should have access to consoles, do?

  Kind regards

  Prem

  Please rate if this can help!

• unauthorized access BI publisher 11g

  Hello

  I installed BI 11g on top of OBIEE 11 g publisher. But when I try to connect, I get the error below

  http://hostname:7001 / xmlpserver

  Access: either you do not have the privilege, or you have not logged in.

  I try to access it from the OBIEE administration, but make the same mistake.

  Thank you

  Prasanna

  I missed the SOAP access permissions. Its working fine now.

• Unauthorized access, after the trial expires

  I got the trial of DPS, it is now expired, so I see access not allowed - you have no permission message, etc. I tried several times to contact Adobe by various means - no response - no surprises! I'm a DPS Certified Adobe instructor, I need to see the/train customer perspective in what is happing in the world of Adobe DPS - I can't, but I can say for them, it's that there are great alternatives out there, Twixl, Aquafadas, In5 Mag +, etc. These people will talk to you, they will be transparent about everything, including costs. I agree that DPS 2015 should be only price wise for a certain segment of the market and Adobe apparently now have no interest in the market of the other segments, but come on Adobe - talk to us and let us at least power free trial/test/train your product.

  
  

  In the words of Pink Floyd "Is there anybody out there?

  Hello Peter,.

  You can contact me at ktukker (a) adobe.com? Please provide the information that you used to register for the 30 day trial.

  The 30 day trial is available to freely test the product. On request, the trial can be extended to 60 or 90 days on request in order to allow more time evaluation.

  With sincere friendships.

  KlaasJan Tukker

  Adobe

• ATG + CRS error in ATGPublishing server, unauthorized access to the IAB

  Hello
  After installing 10.0.3 ATG and trade store of reference on Weblogic, using CIM, started the ATGProduction and the ATGPublishing without problem. I can access the store (http://localhost:7003/crs/storeus) and dynamo administration console (http://localhost:7003/atg/dyn), but when I try to access the ICC (http://localhost:7005/atg/bcc) the web browser displays an error (the page displayed can´t).) I copied the error that appears in the journal ATGPublishing.log
  
  I would be very grateful if anyone can solve this problem. Thanks in advance
  
  Kind regards
  
  Iñigo
  
  
  -----------------------------------------------------
  Error log:
  -----------------------------------------------------
  # < October 19 2011 09:46:17 CEST > < HTTP > < atgappserver > < ATGPublishing > < error > < ExecuteThread [ASSET]: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1319010377001 > < BEA-101017 > < [ServletContext@1961981706[app:ATGPublishing.ear module: / atg path: / atg spec-version: null], request: [weblogic.servlet.internal.ServletRequestImpl@49982a03
  GET/atg/bcc HTTP/1.1
  Accept: application/x-ms-application, image/jpeg, xaml application / + xml, image/gif, image/pjpeg, application/x-ms-application xbap, application / vnd.ms - excel, application / vnd.ms - powerpoint, application/msword, * / *.
  Accept-Language: es - ARE
  User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; Media Center PC 6.0; NET4.0C;. NET4.0E; MS - RTC LM 8; InfoPath.3; managedpc)
  Accept-Encoding: gzip, deflate, peerdist
  Connection: Keep-Alive
  Cookie: DYN_USER_ID = 140000; DYN_USER_CONFIRM = c2d08d3eb51f5945b8e444d80628b112; ADMINCONSOLESESSION = z6MYTp2Q7Y4s4b3yHQGNPrwS15LmJBZvlLYxhSXvktyFvqfbgJyl! 1748133635; JSESSIONID = 01p6Tp1J2Y2QPllJJdT7WXvpQSTyq05Mp12FNqY7YMs27QSqtp2V! 991620916
  X-P2P-PeerDist: Version = 1.0
  
  Root cause]] of ServletException.
  javax.servlet.ServletException: PageFilter: could not get a departure request servlet.
  at atg.filter.dspjsp.PageFilter.doFilter(PageFilter.java:287)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at atg.servlet.GenericFilterService.doFilterChain(GenericFilterService.java:599)
  at atg.servlet.GenericFilterService.handleDoFilter(GenericFilterService.java:462)
  at atg.servlet.GenericFilterService.doFilter(GenericFilterService.java:409)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3715)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3681)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
  >
  # < October 19 2011 09:46:17 CEST > < Info > < ServletContext-/ atg > < atgappserver > < ATGPublishing > < ExecuteThread [ASSET]: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < < > anonymous > > <>< 1319010377046 > < BEA-000000 > < JspServlet: verbose parameter initialized to: true >
  # < October 19 2011 09:46:17 CEST > < Info > < ServletContext-/ atg > < atgappserver > < ATGPublishing > < ExecuteThread [ASSET]: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < < > anonymous > > <>< 1319010377046 > < BEA-000000 > < JspServlet: packagePrefix param initialized to: jsp_servlet >
  # < October 19 2011 09:46:17 CEST > < Info > < ServletContext-/ atg > < atgappserver > < ATGPublishing > < ExecuteThread [ASSET]: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < < > anonymous > > <>< 1319010377046 > < BEA-000000 > < JspServlet: compilerclass param initialized to: null >
  # < October 19 2011 09:46:17 CEST > < Info > < ServletContext-/ atg > < atgappserver > < ATGPublishing > < ExecuteThread [ASSET]: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < < > anonymous > > <>< 1319010377046 > < BEA-000000 > < JspServlet: param compileCommand initialized to: javac >
  # < October 19 2011 09:46:17 CEST > < Info > < ServletContext-/ atg > < atgappserver > < ATGPublishing > < ExecuteThread [ASSET]: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < < > anonymous > > <>< 1319010377047 > < BEA-000000 > < JspServlet: param compilerval initialized to: javac >
  # < October 19 2011 09:46:17 CEST > < Info > < ServletContext-/ atg > < atgappserver > < ATGPublishing > < ExecuteThread [ASSET]: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < < > anonymous > > <>< 1319010377047 > < BEA-000000 > < JspServlet: param pageCheckSeconds initialized to: 1 >
  # < October 19 2011 09:46:17 CEST > < Info > < ServletContext-/ atg > < atgappserver > < ATGPublishing > < ExecuteThread [ASSET]: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < < > anonymous > > <>< 1319010377047 > < BEA-000000 > < JspServlet: param encoding initialized to: null >
  # < October 19 2011 09:46:17 CEST > < Info > < ServletContext-/ atg > < atgappserver > < ATGPublishing > < ExecuteThread [ASSET]: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < < > anonymous > > <>< 1319010377047 > < BEA-000000 > < JspServlet: param superclasse initialized to null >
  # < October 19 2011 09:46:17 CEST > < Info > < ServletContext-/ atg > < atgappserver > < ATGPublishing > < ExecuteThread [ASSET]: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < < > anonymous > > <>< 1319010377047 > < BEA-000000 > < JspServlet: param workingDir initialized to: /mnt/opt/atguser/weblogic/user_projects/domains/base_domain/servers/ATGPublishing/tmp/_WL_user/ATGPublishing.ear/j3704z >
  # < October 19 2011 09:46:17 CEST > < Info > < ServletContext-/ atg > < atgappserver > < ATGPublishing > < ExecuteThread [ASSET]: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < < > anonymous > > <>< 1319010377048 > < BEA-000000 > < JspServlet: complete initialization >
  # < October 19 2011 09:46:17 CEST > < error > < kernel > < atgappserver > < ATGPublishing > < ExecuteThread [ASSET]: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1319010377915 > < BEA-000802 > < ExecuteRequest failed
  java.lang.NullPointerException.
  java.lang.NullPointerException
  at atg.taglib.dspjsp.PageTag.doCatch(PageTag.java:734)
  at atg.taglib.dspjsp.elwrap.PageTagWrapper.doCatch(PageTagWrapper.java:36)
  at jsp_servlet.__error._jspService(__error.java:405)
  at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183)
  at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:523)
  at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:253)
  at weblogic.servlet.internal.ServletResponseImpl.sendError(ServletResponseImpl.java:720)
  at weblogic.servlet.internal.ServletResponseImpl.sendError(ServletResponseImpl.java:591)
  at weblogic.servlet.internal.ErrorManager.handleException(ErrorManager.java:150)
  at weblogic.servlet.internal.WebAppServletContext.handleThrowableFromInvocation(WebAppServletContext.java:2348)

  You can check the logs of the edition where starting without errors?
  I suspect there are errors when you start Publisher.

  Peace
  Shaik

• Unauthorized access of the user - customization of Standard message region

  I enabled SINGLE sign-on for my application. WE have an obligation to have additional validation on SSO. I implemented that in forward the process of the homepage header.
  
  Then, if it's an authentic he goes to homepage, else accesses one more page (page 10) when the message is displayed.
  
  When I'm inauthentic user connection, it goes to page 10. But if I try to change t url of the page from 10 to 5 number, it displays the content of this page.
  I don't want the inauthentic user to access these pages.
  
  My protection of session state is enabled. How can we achieve this requirement at the application level?
  
  Creating an application process and run it before the header of each page is best? I would like to have an effective solution to the performance.
  
  Or can I do validation on SSO to effectively using another logic and display the message before displaying the application page?
  
  Thank you.
  
  I'm in 4.1 APEX
  
  Published by: amri 30 Sep, 2011 16:11

  Hello

  1 create a schema for authorization for example.
  Select 1 from user_table where upper (email_id) = upper(:app_user);

  2. in the shared component, under Security section click on link of security attributes.

  3. Select the authorization tab and select the authroization schema that you defined in step 1.

  Kind regards
  SK