Unbootable and I don't have an instalation disc.

Similar Questions

• I want to install a new hard drive and I don't have the installation discs for Windows, is it possible to get my old copy of Windows as a download?

  Help download windows on old laptop but I have a problem...

  I have an old laptop that I want to install a new drive hard in and I don't have the installation discs for Windows, is it possible to get my old copy of Windows to download so I can fix it this thing? I have my code produces the thumbnail but no physical copy of the Install disks.

  Unfortunately, there is no download of Windows Vista available bits.  Please see: How to replace Microsoft software

• I'm getting "unmountable boot volume" and I don't have the recovery disc or a hard drive on my netbook Windows xp sp3 home.

  I'm getting "unmountable boot volume" and I don't have the recovery disc or a hard drive on my netbook.

  I tried to connect my netbook to a sony bravia tv and I pressed the power button to restart because it was so slow awakening of the mode standby
  I am running windows xp home sp3. What should I do?

  Hi samp2000,

  Follow the steps in this article to resolve the problem:

  When you restart your computer or upgrade to Windows XP, you receive the error message "STOP 0x000000ED UNMOUNTABLE_BOOT_VOLUME".

• I replaced the hard drive in my laptop and I don't have a vista disc to reinstall it because it was already on it again. __

  I have the product code - download vista to use my product code with?
  

  How to get Vista recovery Media

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• I have a problem with Adobe Photoshop Lightroom CC. I installed Lightroom CC on my 10 x 64 windows and I don't have this product alone, I have other Adobe products as well but I always Lightroom 6.5.1 instead of Ligtroom CC 2015.1 why?

  Hello, Sir/Madam

  I have a problem with Adobe Photoshop Lightroom CC. I installed Lightroom CC on my 10 x 64 windows and I don't have this product alone, I have other Adobe products as well but I always Lightroom 6.5.1 instead of Lightroom CC 2015.1 why? Can you help me get 2015.1 CC Lightroom?

  Thanks and greetings

  Barber Marie-Ange

  Sir, I just uninstalled the program and installed it again and my version of lightroom just changed to 2015.5.1 but others still facing this problem and I personally think that this is not a good way to solve this problem, nobody don't want to redownload the entire program for this. These open discussions, you can if you want to help them and thank you so much for guiding me.

  Dehaze cursor disappeared

• I have Adobe Photoshop Elements 9 for Mac and I changed my iMac and I don't have any CD player on my new Mac! How can I install PS elements 9 without a CD player? Can I download it?  I prefer not having to buy a new one! Thank you for your help

  I have Adobe Photoshop Elements 9 for Mac and I changed my iMac and I don't have any CD player on my new Mac! How can I install PS elements 9 without a CD player? Can I download it?  I prefer not having to buy a new one! Thank you for your help

  Hi Nathalie,.

  You can download no doubt

  The download link is available here: https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-7-8-9-downloads.html

  Let us know if this helps!

  Kind regards

  Aurélie hamadi

• I can't install Acrobat Reader. He said that I have a version updated a request to complete (no choice). I don't have any installed version. I'm looking and I can't find no, and if I ask 'open with' PDF documents it does not show an Acrobat

  I can't install Acrobat Reader. He said that I have a version updated a request to complete (no choice). I don't have any installed version. I'm looking and I can't find no, and if I ask 'open with' PDF documents it does not show an Acrobat

  If you're running Windows (which we don't know), you can try to use this tool first remove all traces of your computer:

  http://labs.Adobe.com/downloads/acrobatcleaner.html

  Then you can download the complete player offline installer from

  http://get.Adobe.com/reader/Enterprise/

  After downloading, restart your computer and run the Setup program before anything else.

• Purchased and open Adobe Acrobat Standard DC - it was a disk and I don't have a disk drive.  How can I install online now

  Purchased and open Adobe Acrobat Standard DC - it was a disk and I don't have a disk drive.  How can I install online now

  Hi Lynda,

  You can download the software here:

  Download Acrobat products | Standard, Pro | DC, XI, X

  Guinot

• I have my 5 factory reset iPhone, now I can't set up my iPhone because it must be enabled, and I don't have a sim card. Can someone help me please?

  I have my 5 factory reset iPhone, now I can't set up my iPhone because it must be enabled, and I don't have a sim card to make. Is there a way I can install and use my iPhone without needing to be activated? Can someone help me please?

  To skip the activation of sim card, you can use iTunes if you have a CDMA iPhone. However, if you have a GSM model you will need to insert a sim card to activate your iPhone (it can even be used/inactive). Here is an article that will help you determine if your iPhone is GSM or CDMA: http://osxdaily.com/2012/11/15/determine-iphone-gsm-or-cdma/

• I have reset my laptop and I don't have the set up cd, I have the license key for vista ultimate can I download

  I have reset my laptop and I don't have the set up cd, I have the license key for vista ultimate can I download

  Hello

  "I reset my laptop."

  What do you mean by that?

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• How can I find my product key if my hard drive is empty, my product key is rubbed off and I don't have the owner of the instillation

  How can I find my product key if my hard drive is empty, my product key is rubbed off and I don't have the owner of the instillation

  Hello

  "my HDD is empty, my product key is rubbed off and I don't have the owner of the instillation.

  in this case we cannot help you find your product key

  If vista is preinstalled ask that the manufacturer of the computer is that they will sell you recovery disks and also ask them if a product key entry is required on your part when installing the same

  It is not normally; but ASK them

• Right-click the folder or any other function does not work, and I don't have a sticky key...

  Right-click the folder or any other function does not work, and I don't have a sticky key...

  While I click right click in windows Explorer has stopped working... Help, please!
  

  A Virus Scan. Your PC can be infected. If you have not installed it, use MS Security Essentials if you have a genuine Version of Windows. It's free.

• Adobe Application Manager wants my password and I don't have one, never need one. Ive tried every password I know and I don't know what to do now.

  Im trying to update 6 Lightroom and Adobe Application Manager wants my password and I don't have one, never need one. Ive tried every password I know and I don't know what to do now.

  It calls not just for login password for your computer so that it can install your software?

• On Windows 7, 1334 of the error message when you try to repair XI Acrobat Standard. The software was already installed on my computer so I don't have the installation disc.   Can you please help?

  I have a laptop Windows 7 with Acrobat installed Standard XI.    The program was already installed on my laptop, so I don't have the installation disc.    I'm getting error 1334 and Error 1311 indicating the "file Source not found."    Do you have recommendations for repair?     As a reminder, the software was already installed on my computer so I don't have the installation disc.    Thank you.

  MST can be downloaded from http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html, but you may have problems depending on the operating system and if you have a volume license or upgrade. If the download works for you, don't forget to make a backup on another medium for the future.

• I want to go back to the previous version of 2014.2.  .3 is far too buggy and full of error messages. Create problems because I'm on a timeline with my client and I don't have time to fool around with all the problems.

  2014.3 is far too buggy and full of error messages. Create problems because I'm on a timeline with my client and I don't have time to fool around with all the problems.

  You don't mention what you have encountered errors? Workaround for the problem more frequently reached here is Re: error in Muse: object UID:U6875 has two (or more) owners: U3633 and U3165

  If you have a copy of your .muse file that has not been saved by using 2014.3, you can downgrade by uninstalling Muse, and then choose the previous Version in the drop-down list of filters in the Panel of Apps from the desktop creative cloud application. There will be a popup next to the Muse, where you can select a version prior to install.