unconsciously I blocked the memory card from my camera with BitLocker. How I unlock my card.

Similar Questions

• Write problems block the memory of the host

  Hi all

  I work with a sbRIO 9639 and followed what I thought to be the recommended procedure to write in the block of memory to the host computer via (see diagram attached host and FPGA implementation). However the operation of the aforementioned code does not actually change the memory and what is available is rather just the previous values (which are persistent).

  However, I am able to write to block the memory directly from the vi FPGA (one) and get the results that I would wait if I then run the host after writing the correct values. In fact, I can now see these values from the host using the read/write Protocol.

  Does anyone have an idea on the cause of this problem? I followed the implementation to write and read from the memory in the examples, but have not found any success.

  I can't possibly comment code NIs because I don't know who wrote, why and for what purpose.

  You can write to the control whenever you want, but if you don't actually read it yet (mark) then you're never going to see the new values.

  Polling station should be avoided on the host programs, but it is not inevitable and normal on FPGA.

  Put the entire program within another loop, and then try again.

• How can I download pictures from the memory card?

  photos from the memory card?

  Insert the memory card into a reader of card memory connected to your computer.  It seems to be another hard drive.  Open it and copy the files.

• How to transfer my music from the memory card in my blackberry on my computer?

  I lost music on my Blackberry torch saved on the memory card but I am unable to transfer it to my computer, could anybodey please let me know how I can do this?

  Maybe the info will help you get started...

  You have a card reader?

  You have a memory card adapter?

  An example just FYI:

  MICRO SD 2 GB MEMORY CARD
  http://66.116.138.89/eBay/world2power/EMTF2GO2.jpg

  And... the following article might be worth a visit:

  How to unload your cell phone photos
  http://www.PCMag.com/Article2/0, 2817,2348830,00.asp

  You can copy / paste files to and from the memory card.

  If the pictures on your PC have been published... you can always
  copy it to the memory card, but the phone can not
  acknowledge them.

• OJ6480 am not able to import photos from the memory card inserted in the printer to laptop?

  I can't import pictures from my memory inserted in my OJ6480 card.  I am connected with USB and nothing appears automatically after you insert card.  Also, I used the menu photo option and he doesn't want me to import.  Help, please!  Thank you.

  Hi cafahr,

  I understand you are trying to print photos from a memory card.

  I find the user manual for Officejet 6480 and found the following.

  After taking pictures with your digital camera, you can print them immediately or save them on your computer. To save the pictures on your computer, remove the memory card from your digital camera and insert it into the slot for card memory on the device.

  To save your photos

  NOTE: Use these instructions only when you use a network connection. If you are using a USB connection, then a dialog box appears automatically on the computer when you insert the memory card into the device.

  1. Insert a memory card into the suitable location on the device.
  2. press on the picture Menu.
  3. press the arrow keys and select Photo transfer and then press OK.
  4. press the arrow keys, and then select Yes.
  5. press the arrow keys and select transfer to computer, and then select the name
  of your computer.
  6 follow the prompts on the screen on your computer to save the photos to your
  computer.

  From what you described, the question is simple, the dialog box does not appear on the computer. What happens if you start it > computer or workstation? Do you see something here that looks like it could be the card into the printer?

  Try to leave the printer and unplug the power cable (with the inserted memory card), leave the printer unplugged for about a minute and then plug it back. I want to see if this will push the communication to the computer.

  Have you used this memory card in the printer before successfully? I ask because the problem may be the memory card or the memory card reader in the printer. Take a look at this link, memory card troubleshooting.

  I hope it's useful. If the problem persists, please return with answers to the questions I asked, I'll gladly do some additional research and return with possible solutions. Please also let me know if you use a Mac or a WIndows OS.

• Printing & working copy, but savings from the memory card does not work

  Photosmart Prem C310 printer with current driver and firmware

  Wireless connection

  PC is Windows 7

  When I try to record from memory card to the PC I get the message, «!» No set up.  You must install the software for the device. "on the touch screen of the printer.  What Miss me?

  Hi LZimmerman,

  Follow these steps to map the card reader

  1. Insert the memory card into the printer
  2. open my computer
  3. click on network drive mapping
  4 Select the letter of the drive you want and enter the folder \\192.168.1.101\memory_card

  Note: replace the 192.168.1.101 with the IP address assigned to your printer.
  5. click on finish, and the Player opens for access to the files

• Addressing the memory card SD embarked on my HP Officejet Pro 8600 N911a directly from a PC

  With my 6500APlus the memory card SD has been accessed in my case as http://192.168.0.111 \memory_card but this syntax does not work with the HP Officejet Pro 8600 N911a. Can someone tell me what syntax will work?

  Dean

  Hi deanp,.

  Follow these steps to map the card reader

  1. Insert the memory card into the printer
  2. open my computer
  3. click on network drive mapping
  4 Select the letter of the drive you want and enter the folder \\192.168.0.111\memory_card
  5. click on finish, and the Player opens for access to the files

• Connected by USB PS 7510: access to the memory card?

  For the past year, I had my PS 7510 connected wireless to my home LAN. The memory card appears on my computer (Mac OS X) in my list of devices, and I could access the images that I had scanned it. Changes of houshold allowed me to change my setup and I chose to disable the wireless function and use the USB to connect to the printer. All functions work well, though the memory card is not visible or accessible from any of my applications. Access to the computer is the card memory limited to wireless connectivity? Best regards, Brian

  Thanks for your effort.

  I had already applied the way you suggested in your last post, but I've been through once again, deleting and adding the printer. No immediate joy. Then I took a look at the data in the system and I was wondering why I couldn't see even the card on the printer on the USB port. I was wondering, ad did what I should have done from the outset - I removed the card and reinserted and then he appearred in my list of device as you wish. I feel a little stupid for not having done this before.

  Once again, thank you for the effort and support. I'll look to mark the post as solved.

  Brian

• Lost all my images on the memory card

  I just bought an A2300 and he took on a week hiking trip in Colorado.  At the end of the trip, I took the memory card from the camera and gave it to one of the other backpackers to load my images on his Mac.   He said he saw half a dozen on the map on the .jpg files, but couldn't open them.  When he gave me the card back and I put it in the camera, the card was empty!  I had more than 100 photos on this card when I handed to him.  Now I have nothing.  Any ideas on what happened to all the files and what I can do to recover all the images?

  There are several threads on this topicalready & many lists some software free links interesting to try BUT here is the link to a very good program that you can test drive to see if the images are there & recoverable before you pay for it. IF she finds them you know at least they exist & that you have the choice between either pay for licensed software or try the free stuff & see if it works for you.

  http://www.LC-tech.com/PC/SanDisk-RescuePRO-and-RescuePro-Deluxe/

• Appeare photos and videos have disappeared to a destination and the memory card folder after a halt during the transfer.

  I was downloading photos and videos from a memory card to camera in a USB card reader. After that most of the photos and videos (about 245 to 249) have been downloaded, asked me to jump on the last bit. Now, no pictures appear in the folder where I kept them or on the memory card. I get an error message when I try to eject the card reader. How can I recover pictures, because this is my only copy?

  Hi JanetSmart,

  • Have you tried plugging the card on another computer to see if it works fine it?
  • What is the file format of the file 29?

  It could be a virus, I would also say that you download and run the latest Microsoft Security Scanner to scan the card and check if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Response so that we can better help you.

• images dialog box is empty when you insert the memory card

  This is after you have inserted a card high capacity in the player, which hung the memory slot.  Now just insert a regular memory card, the dialog box appears, but there is nothing in it.

  Sorry if the info seems confused but maybe the
  answer is here somewhere.

  FWIW... There used a similar problem with a Sony memory
  Stick... the solution is to insert the stick into the drive and
  Restart the computer... somehow this would reset the
  stick.  I don't know if it will work for you.

  You may also check your AutoPlay settings...
  If you insert the card and go to... Start / my computer...
  and right-click on the drive letter for the location of in the map is...
  choose... Properties / AutoPlay tab...

  Choose... Mixed content...
  Tick... Select an action to perform
  On the left, click on the default button / apply / OK.

  Give it a try...

  It is possible that your media player is not compatible
  with the SDHC technology. The best is maybe to buy
  an external drive that is compatible SDHC or download
  Unit photo using a USB cable.

  Regarding the card... have regular SD, you tried to manually
  Download the pictures?

  If you connect the device to your PC via a USB cable, turn
  on the camera... then go to... Start / my computer... it may be
  listed as a drive letter...

  If_yes_right click on the drive letter and select... Explorer or
  Open... This should display the directory of the memory card.
  You can copy and paste or drag and drop the files from there to a
  folder on your hard drive.

  (The same steps work if you have a media player...
  When you go to... Start / computer... the media slots
  Drive should be listed under... "Removable disk" with a drive
  letter.)

  Finally... the AutoPlay Repair Wizard can be worth a try:

  Microsoft Autoplay Repair Wizard
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=c680a7b6-e8fa-45C4-A171-1b389cfacdad

• my memory card for my digital camera does not work when I put it in the memory card slot

  I use vista and a emachine El 1200-07w. It worked last week I just stuck the memory card and a menu pops up saying what are the options I could do (for example, open the folder, etc.) now, when I put the memory card in nothing happens, but if the memory card is in when the computer is turned on, then he will say new hardware detected but it can't find a driver for it. Why is it does not work now, but was last week and how the hell can solve this problem. I have no software for my digital camera, I always just went out the memory card it stuck in the memory card slot and it was very good. It's just a less expensive memory card (Lexar) I have a 2 GB and 128 MB and will no longer work. Thanks for any help!

  Hi, I hope you can follow this. Remove the storage card from the computer, then go to control panel
  then
  Device Manager
  Expand portable devices
  the type of memory card slots should be listed if your type is a yellow triangle in it,
  Right-click on it and choose uninstall.
  It should reinstall it automatically or when you put the memory card in the slot.
  This type of fault is often caused by not using material on the taskbar does not safely remove request.

• updated my vivaz and the memory card is locked. How to unlock it?

  Hi, I've updated my vivaz last night and I had no memory card because I didn't lose anything. When I put my card back in, he says its shoreline and enter a password. I never put a password on the memory card so how can I sort this and why did do it?  It's not the 8 gb original you have got with the phone, it is a 16 GB san disk. Could someone help me with this please?

  Should I qualified before, is that the update the phone does not affect the memory card based on its contents, but in some cases like yours, there is blocking it. Yes, the Vivaz is compatible with 32 GB cards.

• I usually use picasa to upload my images, but for some reason any 'auto play' does not appear when I insert the memory card. Any advice?

  When you use picasa to upload my images I usuall just put the memory card in the Tower, AutoPlay appears and then I can view, download, etc... But now the auto dish doesn't appear so that I can tdoen load one of my images from picasa. Can someone help me with this? Thank you

  Hello

  I suggest you to refer to the following Microsoft article and check if it helps.

  Troubleshoot AutoPlay:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Change AutoPlay settings:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  For more information, see the following Microsoft article.

  AutoPlay: Frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  Hope the information is useful.

• Move photos to the memory card

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi mbelva,

  Moving images from your hard drive to a memory card or vice versa is no different to move files from one folder to another. Insert your memory card into your card reader and then open Windows Explorer. Make sure that your memory card is recognized by Windows. If it has you should see it in Windows Explorer in the left pane under computer. Then locate the pictures you want to move, and either drag them from the folder on your hard drive to your card or cut and paste. Remove the memory card when you are finished.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com