under vista and it cannot open the Web 192.168.1.1 for linksys router

Similar Questions

• BlackBerry Smartphones connected to the Internet, but cannot open the web browser, facebook...

  My Blackberry Bold 9900 connects to internet with wi - fi and 3 G/edge connection (w / caps) and receive emails, but cannot open the web browser, facebook, twitter, bbm, app world... for the last two days (I think that I have improved some applications). Everyone knows the same?
  Can someone help me pls? Thank you!!

  OK, at least you get the signal necessary for many applications work.

  Please remove your battery while your phone is on, and then replace it.

  Let us know if that helps you.

• Cannot open the web page in another tab of the browser in application for the custom shop page

  I have a custom stores html page and an external link (such as < a href = "...) (' > < / a >) in this html page.  Now when I type this external link, it opens the web page in the same container and crush the store custom html page. But I hope that it can open the external page in another tab of the browser in application with the button "close".   As this external link is in mode folio. Please let me know if I could do it. Thank you

  We do not support this with the current v2 API. We will be adding in release 27 support for this.

  Neil

• Firewall settings is enabled, disabled and cannot open the Web page in Internet Explorer: "IE can not display the webpage".

  Original title: how to manually configure the firewall?

  Let me know how I can configure my firewall setting manually as it is said that your firewall setting is disabled. I have HomeXP, SP3. I am now faced with another problem with IE8 when I try to open another page, I find this error-"IE can not display the webpage". Sometimes, it works when it is updated and not some time.

  Hello

  1. do you use third-party security software that runs on the computer firewall settings?
  2. What is the error code / message displayed when trying to turn on the Windows Firewall?
  Please follow these steps in the KB article to turn on the Windows Firewall.
  Step 1
  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?
  http://support.Microsoft.com/kb/283673
  Step 2
  How to enable Internet Connection Firewall in Windows XP
  http://TechNet.Microsoft.com/en-us/library/bb456986.aspx
  Follow the steps in order and read the content.
  See also,
  
  "Internet Explorer cannot display the webpage" error in Internet Explorer
  
  http://support.Microsoft.com/kb/956196

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  
  I hope this helps.

• My Vista compupter is slow and I cannot open the control panel

  I need to know what to do the comp is so slow the last few days and I can not connect to the control panel

  Hi diannaRasmussen,

  You have made any changes to your computer recently?

  You get the error message while opening the control panel?

  I suggest you follow the given method and check if it helps.

  Method 1: Please follow the steps in the link below to optimize Windows Vista.

  Optimize Windows Vista for better performance

  Method 2: Alternatively, you can try to perform a clean boot.

  How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7 NOTE: Make sure that roll you back changes to Normal Mode after the clean boot troubleshooting

   

  Method 3:  You can perform an analysis of checker (SFC) to file system to check on the corrupted system files.

  Please follow the steps in the link below city to make the SFC scan;

  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Cannot open the web interface. No. 8080 listener.

  Hey people. I searched through the forum and seen problems similar to mine, but none of their solutions have solved my problem.
  
  When I click on start, Internet Explorer 9 window opens to display it cannot display this Web page to http://127.0.0.1:8080/apex/f? p = 4950.
  
  Background info: Win 7 Pro 32 bit, Oracle Express 11g Release 2
  
  Lsnrctl stat output:
  
  Microsoft Windows [Version 6.1.7601]
  Copyright (c) 2009 Microsoft Corporation. All rights reserved.
  
  C:\Users\User > lsnrctl stat
  
  LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on February 20, 2012 15:48
  : 46
  
  Copyright (c) 1991, 2010, Oracle. All rights reserved.
  
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1)))
  AMT-12541: TNS:no listener
  AMT-12560: TNS:protocol adapter error
  AMT-00511: no listener
  32-bit Windows error: 2: no such file or directory
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=127.0.0.1) (PORT = 1521)))
  STATUS of the LISTENER
  ------------------------
  Alias LISTENER
  Version TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Prod
  ction
  Start date February 20, 2012 15:28:35
  Uptime 0 days 0 h 20 min 10s
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Default Service XE
  Listener parameter File C:\oraclexe\app\oracle\product\11.2.0\server\network\a
  dmin\listener.ora
  Listener log file C:\oraclexe\app\oracle\diag\tnslsnr\User-PC\listener\a
  lert\log. XML
  Summary of endpoints listening...
  (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc)))
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=127.0.0.1) (PORT = 1521)))
  Summary of services...
  Service 'CLRExtProc' has 1 instance (s).
  Instance of 'CLRExtProc', status UNKNOWN, has 1 operation for this service...
  Service 'PLSExtProc' has 1 instance (s).
  Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...
  The command completed successfully
  
  
  
  From what I can tell by browsing the forum, lack the endpoint listener for Port 8080 is why I do not work. Why is it not here and how fix?
  
  
  Thanks for any help.

  Two ideas:

  1. do not use listener.ora, rename it - in most cases it is not necessary

  2 - set the init parameter local_listener instance to answer a listener associated with the only loopback interface so that dynamic registration can be successful (required for the aforementioned endpoints)

• Cannot open the web page "recovery media".

  According to the brochure '10 Recovery right Media Pro Windows', we are supposed to go to http://www.lenovo.com/lenovorecovery to apply for restoration of media.

  However, when you open this page, all I get is an error message: cannot display the requested page

  Correct the problem.

  OK, I found the cause of the problem.

  Lenovo.com is one of those rare sites that don't work well with the module of the Electronic Frontier Foundation HTTPS Everywhere .

  I have disabled HTTPS and now the page is loaded.

• Cannot open the web camera, says side-by-side configuration incorrect.

  said its all in the title, but it has worked one day stop, cannot be opened because side-by-side configuration is incorrect and I went into the event log and found the error and its reason is:

  Microsoft.VC80.OpenMP, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.762' is not found. Please use sxstrace.exe for detailed diagnosis.

  Any help would be greatly appreciated. Thanks in advance

  "' Microsoft.VC80.OpenMP, processorArchitecture ="x 86"publicKeyToken ="1fc8b3b9a1e18e3b", type ="win32", version ="8.0.50727.762 ' is not found. Please use sxstrace.exe for detailed diagnosis.

  This means that you will install the Visual C++ 2005 Sp1 Runtime (and NO, 2008):

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=200b2fd9-AE1A-4a14-984d-389c36f85647&displaylang=en
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• I have win 7 Ultimate edition and windows cannot open the hidden files and folders.

  I have win 7 ultimate, windows cannot open hidden files and folders.plz give me the solution

  Hello

  Please see the thread below for a possible solution (applicable to Windows 7):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/show-hidden-files-and-folders-option-not-working/4d6d7b29-8382-4798-AB43-49ccbfd109bf

• EPA 11 I and she recently used. Erased from my project and now cannot open the new or existing project editor.

  PC computer

  The original Win 7 updated to 10

  When I opened BEFORE it opens to the Welcome screen. If I click on the Organizer, it opens. If I click on the Publisher, it opens on the choice of new or existing project. When I click on one of them PRE closes or disappears.

  If I repeat the same process of the same thing happens.

  I recently completed a 1 h 20 min film that took me a long time to do. IV ' e he has burned down and deleted.

  I've copied and changed then burned about 5 cassettes VHS, some of them on a long hour and 3 1 hours. long. These projects are carried out, and I would like to continue with a new project, perhaps 3 h. long.

  I can't open the editor of a new project.

  For me I can have deleted a necessary element of the program. How to check? What should do?

  [email protected] wrote:

  For me I can have deleted a necessary element of the program. How to check? What should do?

  If so, uninstall, use the Adobe cleaning tool (Yes, it works for Premiere Elements):

  Use the cleaning of creative cloud tool to resolve installation problems

  and reinstall from here:

  Download Adobe Premiere Elements 15, 10, 12, 14, 11, 13

• Cannot open the Web Photo Gallery in CS4

  In my CS2 PS Web Photo Gallery version was already installed. In CS4, is not. I downloaded the plugin from Adobe, but it will not appear when I say PS / file / automate. The address where I placed the folder is:

  C:\Program Files\Adobe\Adobe Photoshop CS4 (64 bit) \Presets\Web Photo Gallery

  Does anyone have an idea why I can not access it via the PS4, version 11? I have to "turn on" in some way to the PS?

  Thanks, Airpix

  You have installed the presets for the web gallery, but you also need to install the plugin:

  II WebContactSheet in the folder plugins/automate

  C:\Program Files\Adobe\Adobe Photoshop CS4 (64 Bit) \Plug-ins\Automate

  Make sure that you install the 64 bit version of the plugin WebContactSheet II.

  Added the: included in the download is a pdf file that explains the exact locations

  where goes the different things.

  MTSTUNER

  Post edited by: MTSTUNER

• "Apps are not work - this application cannot open, the screen resolution is too low for this app run to change your screen resolution.

  Origignal title: Apps does not work.

  I got Windows 7 Starter I have upgraded to Windows 8 Pro on my mini HP laptop, but when I select no matter what application I get the following message

  "This application cannot open.

  The screen resolution is too low for this app run

  Change your screen resolution.

  and when I press 'Edit your screen resolution' I found the screen resolution is the maximum 1024 x 600.

  Under him, I found the following warning "" your resolution is less than 1024 x 768 elements could not fit and applications could not open

  Please advise?

  I know this is an old thread, but I came across it looking for a solution to the same problem. It turns out that my problem has a cause simple and simple solution. I had accidentally pressed the "multiple displays" function key on my keyboard (F4 on my HP Envy) and therefore affect my screen out of two monitors without realizing it. I started getting the error "the screen resolution is too low for this application to run", came here, tried to change my resolution screen and then realized what I had done. Once I changed the key function to the PC only, the problem has been resolved.

• Cannot open the Web site nk.pl - already reset, uninstall and install new ff.

  After a virus (-serach.com, special box, search protect) changed my search on the site, I can't open a website nk.pl.
  Already done all that is described in the internet to get rid of virus, but still can't open a site.

  Separate the issue;
  Shows details of the system;

  Plug-ins installed

  Shockwave Flash 17.0 r0
  Shockwave Flash 11.8 r800

  Having multiple versions of a program can cause problems.

  Take uninstaller from here:
  Uninstall Flash Player | Windows
  Uninstall Flash Player | Mac
  Reinstall the latest version.

  Flash Player Version 17.0.0.134
  https://www.Adobe.com/products/flashplayer/distribution3.html

  https://support.Mozilla.org/en-us/KB/Firefox-cant-load-websites-other-browsers-can

• Cannot open the Web site, that I have used for over a year, get message "no site configured at this address", works very well to explore. What can I do?

  The site worked almost all day and then all of a sudden, he had disappeared. Only got the above message. The site opened very well in IE, which I generally don't use.

  Could you post the link?

  Try clear your recent history:

  • Recent history of claire

• Ran Ccleaner on my desk and now cannot browse the web. Internet said that it is connected

  Original title: Ran Ccleaner on my desk and now my internet, and a few other things does not work

  I ran Ccleaner on my desk today, I did a cleanup and a registry clean and now my internet is not working on google chrome, mozilla or explorer. It says my internet is connected, but it won't load pages, and when I go into network connections, there is nothing there.
  Also a few other things like help and support no longer works.

  I use Windows XP Home Edition.

  Appreciate any help.

  Thank you.

  Now you know why the registry cleaners are dangerous.

  Reformat your computer and reinstall Windows.