Under XP, cannot turn off the Windows Firewall settings tab is not available
My operating system is windows xp (sp3). The firewall is turned on. I want to disable my firewall. But, in my windows firewall set or disable tabs is inactive. Why is this idle setting? What can I do to turn it off?
Hello
· Will there be any changes made on the computer before the show?
You can run the fix it from the link below and check if this can help: diagnose and automatically fix problems of Windows Firewall service: http://support.microsoft.com/mats/windows_firewall_diagnostic/en-us?entrypoint=lightbox
Also access the link: you cannot enable or disable the Windows Firewall on a Windows XP Service Pack 2 computer setting: http://support.microsoft.com/kb/914230
Note: A Firewall is software or hardware that checks information coming from the Internet or a network. Firewall blocks some information or allows information to pass to your computer. If the information is blocked or passed through depends on your firewall settings. A firewall can prevent malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers.
Tags: Windows
Similar Questions
-
I can't turn off my Windows Firewall?
I can't activate the WF out im stuck at the control panel > system and security > firewall anmd so I can't click on anything :(?
Hello
· Why are you trying to turn off the Windows Firewall?
· What happens when you try to click on firewall?
· You receive an error message?
· Have you made changes on the computer before this problem?
· What operating system is installed on the computer?
Step 1:
I suggest you to see the steps in the below mentioned links and check if this may help.
If you use Windows XP, see the link below and check if it helps.
http://support.Microsoft.com/kb/283673
If you are using Windows Vista, check out the link below and check if it helps.
http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
If you use Windows 7, see the link below and check if it helps.
http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
Step 2:
I suggest you to check the status of clean boot and see if it helps.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 and Windows XP
See the articles below:
http://support.Microsoft.com/kb/929135
http://support.Microsoft.com/kb/310353
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
-
When I try to turn on the Windows Firewall, I get a sign message that says "Due to a problem not identified, Windows cannot display the firewall settings."
I found another thread in Microsoft Answers relating to this problem, but who said to go into Services and see if the firewall is configured to automatically start. However, I can't find a Windows Firewall item in the Services Menu.
I have the PC Tools Spyware Doctor antivirus.
I had to do a complete recovery system... which sets just need to make sure that you back up your files.
-
Windows Firewall: I installed eset esmart security and it turned off my windows firewall
I installed eset esmart security and he turned off my windows firewall and itself has a personal firewall, I would like to know what does enter the windows firewall too or not?
Golden rule: one firewall for a computer.
On this basis: abandon the Windows Firewall.t-4-2
-
Original title: WINDOWS firewall
I GET A MESSAGE WHEN I TRY TO CHANGE THE WINDOWS FIREWALL SETTINGS - "DUE TO A PROBLEM NOT IDENTIFIED, WINDOWS CANNOT DISPLAY WINDOWS FIREWALL SETTINGS. HOW CAN I SOLVE THIS PROBLEM?
IN ADDITION, I USE AVG INTERNET SECURITY 2013 AND THAT THE FIREWALL IS ENABLED AND I SEEM TO BE PROTECTED.
Documentation AVG Internet Security 2013 States:
Recommendation:
Generally it is not recommended to use more than one firewall on a single computer. Computer security is not enhanced if you install several firewalls. It is more likely that some conflicts between these two applications will occur. Therefore, we recommend that you use only one firewall on your computer and disable all others, thus eliminating the risk of potential conflicts and problems related to this.
You can read the AVG documentation by clicking on this link, and see section 6.5:http://AA-download.Avg.com/filedir/doc/AVG_Internet_Security/avg_isc_uma_en_2013_06.PDF
So, if you are using AVG firewall, it's wise to just disable the XP firewall for more than a firewall running at the same time can lead to performance problems. Choose one or the other, but not both.I thought installing AVG would understand this by itself, and you know what to do (used to) but I do not want to install AVG to see.
-
Tried most methods still Cant turn on the windows firewall and windows defender
k... I tried a few methods now to go into services and in the confirmation of order... Security Windows won't let me turn on the firewall or Defender on vista Basic... hit me with a message saying due to a firewall problem undefined caanot screen settings... This seems very serious please help
Original title: tried most methods still Cant turn on the windows firewall and windows defender... sounds SERIOUS! Help
An Antivirus is a fundamental need for security to prevent malware being installed.
Malware to disable your firewall and your safety programs.
Scan of Malware in Safe Mode with network.
http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
Once in Safe Mode with network, download and run RKill.
RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.
http://www.bleepingcomputer.com/download/rkill/
Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:
http://www.Malwarebytes.org/products/malwarebytes_free
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
For an Antivirus, install one of these free AVs (installation more than it will cause problems).
And first of all remove any AVs expired may still have installed:
Microsoft Security Essentials:
http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201
Avast Antivirus:
http://www.avast.com/free-antivirus-download#TAB4
See you soon.
-
I get an error of 0x8007042c code when I try to turn on the Windows Firewall.
Original title: firewall of windows 7 is not not useful
can not turn on the windows firewall 7 on Dungeon receives an error of 0x8007042c
I tried many other suggestions, without success. Help would be very appreciatedSee the Microsoft Knowledge Base article to resolve the error of 0x8007042c - http://support.microsoft.com/kb/2530126
Jim
-
Help, please! I plugged a new plan "creative cloud membership (one year)", but cannot turn off the "Plan of creative photography of Cloud (one year). What to do?
Hello
You can try the steps on the following link to cancel, cancel your membership Adobe Creative Cloud
If it does not you or if you get an error contact Adobe to contact customer service
-
Can not enter the Windows Firewall settings
Hello
Can someone tell me what my problem is? When I try to enter my WF in the Panel, he won t let me do that. A message just because of an unidentified problem, windows cannot display only my windows firewall settings.
Because of the informative posting, I would say you should ask Microsoft why you aren't able to open the firewall settings.
If you're ready for a serious debate please let us know which mode of laptop you have, which OS is preinstalled it and which antivir application you use.
Good bye
-
How can I turn off my windows firewall in all categories. I mean completely off.
I can't download my programs because he says there is a firewall that is detected. I have Norton 360, so I do not have the Windows Firewall.
See if this helps:-
http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
If she please vote as helpful.
Thank you.
For future use, the type of problem that you opened a session should go here: -.
http://answers.Microsoft.com/en-us/Windows/Forum/Security?tab=unanswered
-
Try to turn on the Windows Firewall for vista home basic, the code of error 0x6D9
I need help to turn on my windows vista basic home firewall but get error 0x6D9 code. This makes me crazy... I pay your bills online and can't do anything until my firewall is on
Hi William,.Follow these instructions to fix the Windows Firewall:Download and install Windows Repair:When the repair of Windows opens, click on the tab to start repairs, click Start. Uncheck all boxes except for the following:-Reset the registry permissions-Reset the permissions of files-WMI repair-Repair Windows FirewallThen click Start. Once it is finished, restart your computer. Let me know if this helps you.Brian -
Cannot turn off the LEDS on Cisco Aironet 1141
I am trying to turn off the LED on a Cisco Aironet 1141 p/n AIR-AP1141N-A-K9. It is a standalone AP and the CLI I publish this command:
turn off the display of #led AP (config)
The light does not go out after you type this command. If I "run" it appears in the config so that the order has been accepted. Is there another way to turn off the LED? I'm under JA1 IOS Version 12.4 (21a).
If you have the AP 1141 under warranty, you can send an email to [email protected] / * / PA serial number and they can post you the picture ask you.
You want to say "Thank you"?
Ne. Just note the useful responses,
It is more useful than 'thank you'. -
Cannot turn off the issue of jam and paper cartridge (both at the same time)
I have a HP Officejet 8600, running on a wireless home network. The printer will not work. We get two messages. 1. Introduction to jam, and I'm going through all the steps to clear paper, including the search for pieces of paper, as well as any leaves. I found no paper, whole or in part anywhere in the printer. 2. at this point, I get a message that I have a problem with a printer (of ink, installed correctly, etc.) cartridge. Simply replace us all cartridges, so I know that we are not out of ink. However, when I opened the door to the area of printer cartridge, the cartridge does not move where I can check it out. There's just right. So I'm "stuck". I don't know how to get the cartridge door to roll over so I can check! I turned off the computer several times and tried to reset things, but nothing seems to work. Any suggestions?
Followed - I turned off the printer. Then opened the cartridge and reaches into the printer access door. Without moving the cartridge door, I pressed each cartridge to make sure it was placed correctly. Then, shut the door and back running the printer. The printer seems to start correctly. I then opened the door, the door-cartridge moved where I could access them normally. I double checked that each cartridge is installed and closed the door.
At this point, everything seems to work properly.
-
After pressing the power button on my PalmZ22 and the disabled keyboard appears and I type to disable the keyboard this screen disappears. Tapping to turn off the screen to put my password does not work. I tried to reset my Palm with Soft and Hard Reset function, and always with let me not disable the keyboard.
ecwmoore2106, please do not double - post.
-
cannot turn off the old computer to Acrobat Pro
I bought a new computer and installed Acrobat 9 Pro. I went to use it today, but I get an error message
Nancy Pommerening: "Do not use this product at this time. You must repair the problem by uninstalling and then reinsatalling this product... or contact help Adobe customer service. »
I have this on two computers relatively old I can't access is no longer to turn off the program. How to solve this?
HI nancyp.
Please contact the customer service. A customer service agent can help you deactivate the software on your old computers. For more information, see Activation & deactivation help - Adobe .
Best,
Sara
Maybe you are looking for
-
Satellite P200 (PSPB6E) - screen LCD cleaning and new display drivers
I have P200 almost 2 years (which means the end of a guarantee for me soon) and after about a year, bad pixels began to appear. I do not know exactly if all (it's more than 10 now) are in fact the bad pixels. Compared to other laptops Toshiba, I have
-
I have a HP Pavilion Windows Vista Home Premium, and the D: drive is full.
I have a HP Pavilion Windows Vista Home Premium, and the D: drive is full. I don't understand how he got that way... but... I've never used windows to the top, however I do back up with my Norton Security. I'm not a COMPUTER guru AT ALL and am very
-
the location does not contain the driver * for required processor architecture
I'm trying to set up my hp laserjet as a shared printer on my network domestic. The printer is attached to a Win7 x 64 machine, all the other computers on my network are XP 32. When I try to load additional x 86 drivers on Win7 computer, I get the me
-
TMS can not see or will not add all devices
We try to add (manually) a conductor after we he purged the system. The driver is functional, ping-able. We tried to restart the services of TMS in winserver, restarted TMS, but made no difference. We are on v14.3.1. It is not only the conductor, i
-
When I go to the Store tile in Windows 8, I was happy to see the "upgrading to Windows 8.1 free". I read about this free update, but it has never been available for me so far. However, when I click on download, it gives me an error saying: "you must