Under XP, when I try to install the program screen flash BACK and trying to change back, but then return to the windows form.

When I run the Setup in the program screen flash backs and trying to change back, but then return to the windows form.

* original title - back program will not be run. *

How old is this program and what is his name?  If you give us the name of the program someone read here who have experience with the peculiarities of the program might be able to provide more help.

Open a command prompt, and then try running Setup from the command prompt.  To start a command prompt, type CMD in the box run from the start menu and press or click OK .  At the command prompt, you can use the CD command to navigate to the CD, or you can run the Setup program by using the full path to the Setup program, for example:

x:\Install.exe

where x is the CD drive letter.

John

Tags: Windows

Similar Questions

  • When you try to install the windows error message update. 0x80070005

    When trying to install the update to windows security get message cannot install.  code 0x80070005

    Hi jimbo510,

    1. did you of recent changes on the computer?

    2. update you are trying to install on the computer?

    3. do you have security software installed on the computer?

    The error message 0 x 80070005 is an access denied message.

    Make sure you have logged in as an administrator and try again to install updates.

    View update history to know which update is not installing.

    (a) open Windows Update by clicking Start , all programsand then click Windows Update.

    (b) in the left pane, click view update history.

    (c) to view more information about an update, double-click it.

    Once you know the update's KB number then visit the Microsoft Download and put the number in the box search, download and install the update manually, check to see if it works.

    http://www.Microsoft.com/downloads/en/default.aspx

    If you try to install service pack 3 for Windows XP on the computer the error message, refer to the article below and check if that helps.

    Error message: "0 x 80070005 access denied. You are not allowed to perform the requested operation. "

    http://support.Microsoft.com/kb/816731

  • D:/autorun.exe is not a valid win32 application he came up with this error when I try to install a program on a disk and it is really buggin me

    It is in these exact words and it's annoying me like crazy can help pleae somone

    Hello

    Thank you for joining Microsoft Community!

    According to the description, it looks like you get the autorun.exe when installing a program on a disk.

    However, we need more information to help you better.

    Please help me answer this question.

    1. is the particular problem with a particular program?

    2. is the specific issue when installing a program on a particular CD?

    3. what program are you trying to install?

    4. What antivirus do you use?

    The probable cause for this error 'not a 32-bit application valid' can have several causes:

    I have listed some of them below.

    The file is corrupted, bad or missing.

    a. If the hard drive is damaged or badly it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.

    b. If you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.

    File is not designed for your version of Windows:

    a. If you try to run a program that is not designed for your version of Windows, you can get this error.

    b. Although numerous older programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.

    c. If the program is an MS-DOS program more former start program or Windows, you get this error.
    d. If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

    File is a virus, worm or other malicious program file.

    a. this error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.

    (b) if the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program, start the computer in

    Safe mode will ensure that nothing is running in the background that could cause this problem.

    Hardware incompatibility.

    a. If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.

    b. download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

    Provide us with more information on the issue to provide a better solution.

  • Why when I try to install the windows media player 11 on windows xp it tells me a newer version is already installed but I have the windows media player 10

    I downloaded service Pack3, service pack 2 downloading... has all the updates I have no idea what to do, even if I only did windows geniune validation thing... any help?

    Thank you very much but I went to my computer - programs - windows mp folder clicked on "wmsetsdk" and it has regenerated everything and started to download wmp 11 after I have validated my widows thank you very much for your help...

  • After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help?

    After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help? (My disk utility shows that she in MAC OS extended (journaled) format.)

    It shows that it is Mac OS extended, not journaled. Click enable logging in the toolbar.

    The thing you read is if you format the drive using the RAID settings you have selected. You have to look at the bottom of the window where it shows the Format.

  • HP probook 440 g 2: 1721 error occurs when I try to install the client manager of HP security

    Error code 1721 occurs when I try to install the HP Security Manager in HP probook 440g 2 having win pro 8.1.

    The issue was resolved when I formatted my system and reinstalled the drivers.

  • When you try to install the HP Laserjet 1300 printer error there is a problem installing this hardware.

    Original title: HP Laserjet 1300 Windows XP, SP3 error installation

    When you try to install the HP Laserjet 1300 printer, I get the following error message and the process stops and restores.

    CANNOT INSTALL THIS HARDWARE

    There was a problem installing this hardware

    HP Laserjet 1300 PCL 6

    An error occurred during the installation of the device.

    The specified Module could not be found.

    I have used the original printer installation cd, bought a new cd from HP and downloaded the drivers directly from the HP Web site and I get the same error.  The record show error install printer on each attempt of events. Can anyone help?  Thank you

    Hello

    You are able to install other programs?

     

    Method 1: See the following article:

     

    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02073861&LC=en&cc=us&product=3795406

     

    Method 2: view the following steps and see if that helps.

    (a) disconnect the printer

    (b) uninstall the software and drivers on the computer

    (c) plug the printer back

    (d) allow the Hardware Wizard search for drivers

    e) if it does not, it asks you to install the source for the drivers, the installation driver CD and install the drivers and see if that helps.

  • I get error number ox80248015 when I try to install the update from the ms window

    I get error number ox80248015 when I try to install the update from the window

    see if that covers your situation: http://support.microsoft.com/kb/896226

    Also make sure that the date and the system time is set correctly.

  • code Ox643 error when you try to install the update of security for flash player (KB923789)

    I get the error code Ox643 when you try to install the update for flash player (KB923789) security - after Mr fixit running and the application of other measures recommended, I still have the error code and get the installation error code. What should I do now?

    Is Adobe Flash Player v11.3.300.257 (or higher) installed? Test here using Internet Explorer (only!)-online http://www.adobe.com/products/flash/about/

  • I use Windows XP, when I try to install 2 network connection on a PC, AAQMS has stopped working, but if I disable the secand connection quite well.

    original title: connection to a network PC 2

    I use Windows XP, when I try to install 2 network connection on a PC, AAQMS has stopped working, but if I disable the secand connection quite well.

    1 connected directly to the AAQMS system for the Air monitoring

    2. connect directly to the LAN of the company

    There is a solution that I can't connect two without any AAQMS system shutdown.

    Hello

    Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP Networking forum.
  • When I try to install the upgrade of the software real player says I need, he says that there is no installed: 246 encoder and not enough disk space

    no installed: 246 encoder

    When I try to install the upgrade of the software real player says I need, it is said that there are no H 246 encoder installed and not enough disk space, even if I removed several programs releasing upward (I hope) a generous amount of disk space. I have a Toshiba satellite P105-S6124 2006.

    Hello

    ·         The question is limited only with Real Player?

    Method 1:

    You can try running Disk Cleanup in Windows XP, which will safely remove unused files from the computer and check if that tool:

    Description of the tool in Windows XP disk cleanup

    http://support.Microsoft.com/kb/310312

    Method 2:

    You can try to install the latest codec pack from the Web site by using one of your favorite search engines and check if it helps:

    With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

    See also:

    http://www.Microsoft.com/download/en/details.aspx?ID=507

    Method 3:

    If the problem is specific to Real Player, you can try to uninstall ad reinstalling the program and check if it helps.

    How to change or Remove a program in Windows XP

  • When I try to install the program on uniblue power I get an error message that the mia.lib was not found.

    When I try to install any programs, I receive the error message that the mia.lib was not found. What should I do to correct this?

    Hello
    Yes, it seems that this program is not running Windows XP. If the requirements for this program is Windows Vista or Windows 7, then the upgrade may solve your problem.

    I hope this helps. Just reply to the results.

  • error ikernelexe when you try to install the multimedia driver

    When you try to install the multimedia driver, I get the following message: "error installing ikernelexe. Using Windows XP. Please notify.
    Thank you

    Hi MarkPfeffer,
     
    This problem may occur if one or more of the following files are missing from the Windows\System32 folder:
    • Stdole32.tlb
    • Stdole2.tlb
    • Stdole.tlb

    Follow the steps listed in the article given to solve this problem:

    Error in Ikernel.exe when you install programs using InstallShield

  • In XP, when you try to install the printer, get error "the specified port is unknown."

    See the title of the question.

    * original title - when I try to install the printer, I get the message "the specified port is unknown. This happened after cable tv and cable modem has been installed

    Thanks for your help. I am not a comp read and write to do all this.  here goes

    No printer listed. I deleted all.no ports usbxxx or dot4xxx. several others listed.

    Middle neck is the same. Intel

    the RT is Windows 2000 or xp.

    It's what I expected.

    Usbprint.sys figure 54 times more often in documents and settings. also in nt service pack driver PK. Ditto for usbmon.dll.

    This is not the case.

    1. open Windows Explorer and type C:\Windows\system32 into the address bar.
    2. find usbmon.dll
    3. right click on this file. Select properties, and then click the Version tab. Is - this version 5.1.2600.5512?  If not, is what version?
    4. now, go to the C:\Windows\system32\drivers folder
    5. what version is the usbprint.sys file?

    You have a copy of each file in C:\Windows\ServicePackFiles\i386?  If so, what are the versions of these files?

    If the usbprint.sys and usbmon.dll in C:\Windows\ServicePackFiles\i386 files are identical (or older) versions that the corresponding files in C:\Windows\system32 and C:\Windows\system32\drivers, copy the C:\Windows\ServicePackFiles\i386 files into their appropriate folders.  Then restart.

  • Why my windows freeze and go does not respond when I try to install the msn photo on hotmail download tool?

    Why my windows freeze and go does not respond when I try to install the msn photo on hotmail download tool?

    The active x bar descends into the small window and freezes all windows open right there and will not respond. This happens when I open a new message and try to attach photos.

    Things I tried but has not made a difference:

    reinstalled IE 8, deleted the history of the browser, disk Cleanup, removed msn photo upload control, optimized IE8

    With xp media center

    PS. This occurs also at any time the information down to install an active x on any site control

    The only way to surf now with frustration is to use IE 8 NOT add optional

    So I fixed that on my own and that's how I did it.

    You must uninstall IE 8 completely which will bring you to IE 7 (in my case) and then install IE 8 via the site updates or microsoft.

    Uninstallin IE 8 by going to:

    Start--->

    Control Panel--->

    Add Remove programs--->

    Scroll down to IE 8--->

    Click on delete.

    IE8 updates must be removed also, if not then click the box 'To see the updates' on the top of the window to scroll down, look for the IE 8 security updates and delete.

    Resart your computer and install IE 8.

    This worked for me and may or may not work for you.

Maybe you are looking for