Unexpected trap kernel mode

Similar Questions

• How to solve the unexpected kernel mode trap

  Whenever I have to try to go to the internet and then after 10-15 minutes, my pc goes into blue screen crash.

  Problem is "Unexpected Kernel Mode trap"

  Please suggest Me, I'm unable to open Web.

  Hi rohitsawant,

  It seems that the cnnctfy2.sys may be the question:

  Bugcheck 1000007F, {8, 81118000, 0, 0}

  WARNING: Unable to verify timestamp for cnnctfy2.sys
  ERROR: Module load completed but symbols can be loaded for cnnctfy2.sys
  Probably caused by: igdkmd32.sys (igdkmd32 + a018)

  Try uninstalling Connectify and see if the error is resolved.

  Later if you use Connectify make sure you install the latest version and that it supports Windows 8.

• BSOD: Unexpected Kernel Mode trap - Windows 8

  Hello

  Is it possible to diagnose the problem 'Unexpected Kernel Mode trap' in 8 Win, to understand what could have caused it? The link to the contents of the minidump folder:

  https://onedrive.live.com/redir?RESID=C978A53A642A033C! 216 & authkey =! AH1PMvMgLigYvQo & ithint = the file % 2cdmp

  Thanks in advance!

  This phenomenon was related to Kaspersky.  I remove it and use the built in Defender in its place.

• Unexpected kernel mode trap

  recently, after my computer updates the next time I turn on my computer, I get the BSOD and a message on an unexpected kernel mode trap. I downloaded the minidump and system info here: https://onedrive.live.com/redir?resid=9DD5EEE5306D9F5A! 172 & authkey =! AKbffeNfduEY90g & ithint = % 2cdmp

  any help would be greatly appreciated

  Thanks in advance

  Hello

  Bugcheck 7F, {8, fffff8033dffde70, ffffd000227b0ff0, fffff8033c833af3}

  WARNING: Unable to verify timestamp for mfehidk.sys
  ERROR: Module load completed but symbols can be loaded for mfehidk.sys
  Probably caused by: mfehidk.sys ( mfehidk + 5cc35)

  McAfee but it could just as easily have been moy.

  You run two major antivirus programs which is an absolute must not do. They will be
  interfere with each other, cause strange problems and actually lower your security.

  Uninstall AVG and McAfee. Use Windows Defender in Windows 8/8.1 that is a complete
  antivirus.

  AVG removal tool
  http://www.Avg.com/us-en/utilities

  McAfee removal tool
  http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  List of tools to clean/uninstall anti-malware programs
  http://answers.Microsoft.com/en-us/protect/wiki/MSE-protect_start/list-of-anti-malware-product-removal-tools/2bcb53f7-7ab4-4EF9-ab3a-6aebfa322f75

  Uninstallers (removal tools) for common antivirus software
  http://KB.eset.com/esetkb/index?page=content&ID=SOLN146

  Resolution of the blue screen in Windows 8/8.1 errors
  http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors
  
  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
  Start Windows (applies to Windows 8/8.1). If you cannot start Windows 8/8.1 try using
  a disk repair (see methods of doing a below) to access Mode without failure and other evil -.
  steps of shooting.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  BCCode: 7F 0x0000007F which is the same as 0x1000007F<-- read="" this="">
  http://msdn.Microsoft.com/en-us/library/ff559244(v=vs.85).aspx
  
  BCCode: 7F 0x0000007F which is the same as 0x1000007F<-- read="" this="">
  * 1304.html http://www.faultwire.com/solutions-fatal_error/Run-a-System-diagnostic-Utility-supplied-by-your-0x1000007F-

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Unexpected kernel mode trap in windows 8

  Hello

  I got the blue screen saying problem "unexpected kernel mode trap" in windows 8.

  Could you please tell me what is the problem of my minidump I recorded on my SkyDrive?

  Here is the link;

  https://onedrive.live.com/embed?CID=18736086D9F584B3&RESID=18736086D9F584B3%21158&AuthKey=AFbowKaDg4GMGVI

  https://onedrive.live.com/embed?CID=18736086D9F584B3&RESID=18736086D9F584B3%21154&AuthKey=AAVL9dOBJxdzNuw

  Please run the Verifier (DV) according to the instructions in the link below.

  Note: Be sure to read and remember the steps to reset the DV in case of crash and post a link to the newly generated crash dump here.

  Driver Verifier - stalking a bad driver to behave. Created by ZigZag3143, Co.authored by of JMH3143
  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-system/driver-verifier-tracking-down-a-mis-behaving/f5cb4faf-556b-4B6D-95b3-c48669e4c983

• Error unexpected kernel mode trap

  I installed windows8 in my lenovo G580... But when I connect to the internet in 15-20 minutes... My computer laptop restarting with blue screen and show unexpected kernel mode error trap... Plizz Help

  My 5 mini dump file is here-online http://www51.zippyshare.com/v/30900556/file.html

  Hello

  You are aware of the fact that these files are ~ 2-3 months, correct? In any case, we have various bug different controls of files attached DMP:

  UNEXPECTED_KERNEL_MODE_TRAP (7f)

  This bug check indicates that the Intel CPU generated a trap and the kernel could not catch this trap.

  If we take a glance at the call of the battery (warning, it is large enough):

  STACK_TEXT:
  WARNING: Information not available stack unwind. Sequence of images may be wrong.
  afd5cffc 92f7067c 89783000 afd5d074 afd5d024 igdkmd32 + 0x196d00
  afd5d00c 92f6c574 88ad0970 afd5d074 88 has 52614 igdkmd32 + 0x13467c
  afd5d024 92e60892 88a4e000 afd5d074 00000000 igdkmd32 + 0 x 130574
  afd5d084 92f0a03e 88a4e000 afd5d5bc 88a4e000 igdkmd32 + 0 x 24892
  afd5d5d4 92f0a3dd 88a4e000 afd5d630 00000000 igdkmd32 + 0xce03e
  afd5d5e4 92eb29b2 88a4e000 88a4e000 00000000 igdkmd32 + 0xce3dd
  afd5d630 92e5833f 88a4e000 00000000 00000000 igdkmd32 + 0x769b2
  afd5d684 9040b12a 88a4e000 afd5d798 00000000 igdkmd32 + 0x1c33f
  afd5d698 818efba9 8038e840 88833248 00000000 dxgkrnl! DpiFdoMessageInterruptRoutine + 0x2c
  afd5d6ac 8198567 8038e840 d a4d6887d 88833248 nt! KiInterruptMessageDispatch + 0x12
  afd5d6ac 8187fcfb 8038e840 a4d6887d 88833248 nt! KiInterruptDispatch + 0x6d
  afd5d798 8187f7b6 884c 1998 884c 1998 856105d 8 nt! SepNormalAccessCheck + 0 x 113
  afd5d864 8187f1e9 856105c 00000001 00000000 4 nt! SepAccessCheck + 0 x 163
  afd5d94c 818 has 8503 4 00000000 afd5d988 nt 856105c! SeAccessCheckWithHint + 0x3a0
  afd5d998 8bb90bff 856105c 4 884c 1998 00000000 nt! SeAccessCheckFromStateEx + 0 x 52
  afd5d9f8 8bb915cd 00000000 00000000 NETIO afd5da34! KfdReleaseCachedFilters + 0x24a
  afd5da58 8bb8e76d 8a1c0178 afd5df40 85613978 NETIO! KfdReleaseCachedFilters + 0xc18
  afd5dc88 82087257 afd5df40 NETIO 85613978 0000002 c! KfdClassify + 0x25d
  afd5ded8 afd5df40 82079408 00000000 00000000 tcpip! WfpAleClassify + 0 x 50
  afd5dfb4 820797bf 85969120 0000002 00000002 tcpip c! WfpAlepReauthorizeInboundConnection + 0x8d0
  afd5e054 8207745d 00000011 8585c 750 00000000 tcpip! WfpAleReauthorizeInboundConnection + 0xc2
  afd5e13c 8207df38 00000002 00000000 884a70bc tcpip! WfpAleReauthorizeConnection + 0x2a9
  afd5e234 82086408 85969120 00000002 tcpip 8585c 750! TlShimOptionalReauthorizeConnection + 0x3c1
  afd5e32c 051 00000011 00000002 00006c 07 tcpip 8208c! ProcessALEForTransportPacket + 0 x 181
  afd5e72c 8208cfbd 00000002 00006c 07 00006cf0 tcpip! WfpProcessInTransportStackIndication + 0xb5e
  afd5e7a8 8208dbb7 85969120 00000002 00006c 07 tcpip! InetInspectReceiveDatagram + 0 x 105
  afd5e868 8208d88b 8578e8a0 8a3a41e8 00000014 tcpip! UdpBeginMessageIndication + 0x4f
  afd5e924 8208d4f9 85492ba4 afd5e950 afd5e954 tcpip! UdpDeliverDatagrams + 0x9d
  afd5e9d4 8208d11f 8578e8a0 8a3a41e8 afd5ea10 tcpip! UdpReceiveDatagrams + 0 x 251
  afd5e9e4 8208 has 462 afd5e9f4 8214efc8 8578e8a0 tcpip! UdpNlClientReceiveDatagrams + 0x12
  afd5ea10 8208a0d0 00000000 00000011 8214efc8 tcpip! IppDeliverListToProtocol + 0x3a
  afd5ea4c 82089bc9 8214efc8 afd5eaac afd5eaa4 tcpip! IppProcessDeliverList + 0 x 53
  afd5ead8 820787ae 8214efc8 afd5eb14 82151770 tcpip! IppReceiveHeaderBatch + 0x1c1
  afd5eb38 820778 8 8a3a41e8 8a3a41e8 857D 4940 tcpip c! IppLoopbackIndicatePackets + 0x35c
  afd5ee08 8207d1d1 afd5ee54 8214efc8 00000001 tcpip! IppLoopbackEnqueue + 0x2e9
  afd5ee90 8207ca2a 8214efc8 8579384c 8579384c tcpip! IppDispatchSendPacketHelper + 0x4ea
  afd5ef40 8207b8e4 8578e8a0 8214f22c 00000006 tcpip! IppPacketizeDatagrams + 0x2b0
  afd5efe4 82083d 82 afd5f008 820829f0 tcpip 00000004! IppSendDatagramsCommon + 0x66a
  afd5f004 afd5f278 820833af 86d98ed0 afd5f0c8 tcpip! RssHashComputeToeplitzPortHash + 0 x 47
  00000000 00000000 00000000 00000000 00000000 0xafd5f278

  We see a lot of tcpip.sys and some NETIO, .sys calls. It's Microsoft network related calls and routines. Then we come to a DirectX kernel call in a few calls igdkmd32.sys which is the Intel Graphics driver.

  That being said, we probably have a 3rd party source (antivirus, firewall, some 3rd party app network) causing conflicts NETBIOS and the need to update the video card drivers.

  ------------------------------------------------------------------------------------

  On one of the many * 7F we have, there are a ton of calls from cfosspeed6.sys which is the

  cFosSpeed - The Internet Accelerator driver.

  We also have a bug control REFERENCE_BY_POINTER (18) .

  This indicates that the reference of an object count is illegal for the current state of the object.

  If we take a look at the call stack:
  
  STACK_TEXT:
  bb93b3c4 81bd113f 86330940 00000000 00000018 nt! KeBugCheckEx
  bb93b3e8 81 has 96702 863205f0 00010224 b883f300 nt! : FNODOBFM: 'string' + 0x35e37
  bb93b444 81a96d5c 863205f0 b883f300 224bf394 nt! ExpApplyPriorityBoost + 0 x 110
  bb93b49c 81 has 93297 863205f0 baa02598 d3f8f108 nt! ExpWaitForResource + 0xbf
  bb93b4e4 d0952713 863205f0 00000001 97ab6420 nt! ExAcquireResourceExclusiveLite + 0 x 191
  bb93b520 d093e206 863204b 0 97ab6674 00000000 fastfat. FatAcquireExclusiveVcb_Real + 0x2b
  bb93b774 d093de9a 97ab66b4 863203b 8 00000000 fastfat. FatCommonCreate + 0x2fc
  bb93b7b4 81a8fd02 013203b 8 8636f6d8 85afbe08 fastfat. FatFsdCreate + 0x4c
  bb93b7d0 8069ea9f 00000000 85e25568 8636f6d8 nt! IofCallDriver + 0x3f
  bb93b80c 806b92dd 00000000 00000000 FLTMGR bb93b850! FltpLegacyProcessingAfterPreCallbacksCompleted + 0x24c
  bb93b86c 81a8fd02 cfbbb730 8636f6d8 86360005 FLTMGR! FltpCreate + 0x2d8
  bb93b888 81cfde43 224bfea0 81cfd935 82810012 nt! IofCallDriver + 0x3f
  bb93b9a8 81cb4b96 8636ae00 85068040 85604d 20 nt! IopParseDevice + 0 x 512
  bb93ba2c 81cfbc99 00000000 bb93ba88 01000040 nt! ObpLookupObjectName + 0 x 251
  bb93ba90 81cfaf0f 038dfb50 85068040 00000001 nt! ObOpenObjectByName + 0xfe
  bb93bb0c 81cf9538 038dfb18 038dfb50 00100081 nt! IopCreateFile + 0x2a5
  bb93bb58 90db6a8a 038dfb18 038dfb50 00100081 nt! NtCreateFile + 0 x 36
  WARNING: Information not available stack unwind. Sequence of images may be wrong.
  bb93bbe0 81b9352c 038dfb18 00100081 038dfb50 bdselfpr+ 0x7a8a
  bb93bbe0 771d 6954 038dfb18 00100081 038dfb50 nt! KiFastCallEntry + 0x12c
  00000000 00000000 00000000 00000000 0x771d6954 038dfba4

  Unable to load the image? Free \C:\Program Files\Bitdefender\Antivirus Edition\bdselfpr.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for bdselfpr.sys
  ERROR: Module load completed but symbols can be loaded for bdselfpr.sys

  ^^ BitDefender self-propelled Nacelles for the Protection

  ------------------------------------------------------------------------------------

  Global:

  1. uninstall cFosSpeed - The Internet Accelerator.

  2. remove and replace BitDefender integrated Windows Defender in Windows 8:

  BitDefender removal - http://www.bitdefender.com/support/how-to-uninstall-bitdefender-333.html

  3. make sure you have the latest video card drivers. If you are already on the latest graphics card drivers, uninstall and install a version or a few versions behind the last to make sure this isn't a last number one driver. If you have already experienced with the driver of the card later and earlier versions, please try the driver beta for your card.

  4 just a side question, I see that you have installed TuneUpUtilities. What do you use?

  Kind regards

  Patrick

• Unexpected kernel mode trap in win8

  It's a relatively new PC running on core2duo with 2 GB of ram.

  At the beginning I had installed win7 BSOD was very common with a graphic error with a few seconds of hang on the screen I changed the win7 drivers, but it was still very persistent.

  Similar problem when I installed win8 times the error of graphic and unexpected kernel mode trap causing the computer to restart.

  I'm afraid that it's a hardware problem and not something with the drivers or software that I have installed nothing at the moment except some basic stuff.

  A graphical error with a blocking was something like that.

  "Display driver stopped responding and has recovered.

  Intel Graphics Accelerator Drivers for Windows display driver Vista (R) stopped responding and has successfully recovered. »

  Here is the link for the windows folder dump file.

  https://onedrive.live.com/redir?RESID=EE86EC3BDE6EEEF! 143 & authkey =! AMDlNvmv0z8jx_I & ithint = the file % 2czip

  Thanks in advance!

  Djoko. HK

  This is your directX and simply upgrade to win 8.1 should solve the problem.  You have a video driver for vista era.  I would also like to re - install that. »

  

• Please help error - unexpected kernel mode trap

  Unexpected kernel mode trap

  https://SkyDrive.live.com/?LC=1033#CID=D1BBF7C5BB3EF5B2&ID=D1BBF7C5BB3EF5B2! 109

  The memory.dmp file showed the involvement of the nvlddmkm.sys, which is the driver of NVIDIA graphics card.

  However there may be other involved third-party drivers.

  You can try uninstalling and reinstalling the graphics driver.

  Consider doing a «custom installation "driver, then choose"Perform a new installation".»

  In addition, there are a few older drivers loaded then system which can be problematic.

  I would say to uninstall, at least temporarily, Internet Download Manager, UltraISO, TuneUp Utilities, Gigabyte on / off Charge and Gigabyte EasyTune or Easy Energy Saver that these applications are installing older drivers that may be problematic.

  And update drivers, such as audio and LAN drivers, for versions of Windows 8, using the link below for the motherboard - choose 64-bit as operating system Windows 8:

  http://www.gigabyte.com/products/product-page.aspx?pid=3908#driver

  Consider also updating the BIOS as the current version of BIOS seems to be F3 which seems to be several versions behind the current version.

• Unexpected kernel mode trap (igdkmd64.sys)

  Hello

  My system has been crashing when I'm browsing the internet with the blue screen appears with the above error message: unexpected kernel mode trap. The system is restarted automatically after the error. I tried to check the graphics driver and do not appear to be up-to-date. I post a link to my minidump files. https://onedrive.live.com/redir?resid=5A9B021CD5CBE99B! 110 & authkey =! AKSpKOf83cnWGtA&ithint=file%2c.rar.

  I use a windows laptop HP Pavilion g6 8. The processor is Intel (r) Core i3 - 2370 M CPU @ 2.40 GHz. can someone please scan files and advise me on the source of the error? The problem seems as long as I'm browsing. It does not appear when I use mode safe mode with networking.

  Hello

  All attached files of the DMP are the bug checking, UNEXPECTED_KERNEL_MODE_TRAP (7f) .

  This bug check indicates that the Intel CPU generated a trap and the kernel could not catch this trap.

  0: kd > k
  Call child-SP RetAddr site
  fffff800'9404fd28 fffff800'97477769 nt! KeBugCheckEx
  fffff800'9404fd30 fffff800'97475834 nt! KiBugCheckDispatch + 0 x 69
  fffff800 '9404fe70 fffff880' 04b5daa1 nt! KiDoubleFaultAbort + 0xb4
  fffff880'05f9efe0 00000000 00000000' igdkmd64 + 0xe4aa1

  The Intel Graphics driver delivered a double fault.

  ---------------------------

  1. make sure you have the latest video card drivers. If you are already on the latest graphics card drivers, uninstall and install a version or a few versions behind the last to make sure this isn't a last number one driver. If you have already experienced with the driver of the card later and earlier versions, please try the driver beta for your card.

  2. remove and replace McAfee integrated Windows Defender in Windows 8 for temporary troubleshooting purposes as it is probably cause conflicts:

  Removal of McAfee- http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

  Windows Defender (how put on after the withdrawal)- http://www.eightforums.com/tutorials/21962-Windows-Defender-turn-off-Windows-8-a.html

  3 uninstall CyberLink as soon as possible.

  Kind regards

  Patrick

• Help with current unexpected Kernel Mode trap

  Hello!

  I had a few recent BSOD appear more and more frequently, I thought that I just had a virus of some sort then ran all the scans I had and it seemed to have cleared up. But it's new and occur at more frequent intervals.

  Link to the DMP file my newest.

  http://1drv.Ms/1ssKpcQ

  Any help would be greatly appreciated!

  MB

  This accident was related to your atheros wireless LAN driver.  I'd install the most recent driver available, even if it is the same date that drivers become corrupt

  If you continue to plant I would remove Symantec as it is a major cause of BSOD

  Microsoft (R) Windows debug 6.3.9600.17029 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Users\Ken\Desktop\062014-42421-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol of validation of the path summary *.
  Location of response time (ms)
  C:\Users\Ken\Desktop OK

  Symbol of validation of the path summary *.
  Location of response time (ms)
  Deferred SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Symbol search path is: SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is: C:\Users\Ken\Desktop
  Windows 8 Kernel Version 9200 MP (4 procs) free x 64
  Product: WinNt, suite: TerminalServer personal TerminalServer
  By: 9200.16864.amd64fre.win8_gdr.140309 - 1509
  Computer name:
  Core = 0xfffff801 '93485000 PsLoadedModuleList = 0xfffff801' 93751aa0
  The debugging session: Fri Jun 20 06:50:48.317 2014 (UTC - 04:00)
  System Uptime: 0 days 0:30:55.995
  Loading the kernel symbols
  ...............................................................
  ................................................................
  .....................................................
  Loading user symbols
  Loading unloaded module list
  ........
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck 7F, {8, fffff88001a89cb0, fffff88017ebdf60, fffff8019354cef3}

  WARNING: Unable to verify timestamp for athw8x.sys
  ERROR: Module load completed but symbols can be loaded for athw8x.sys
  Probably caused by: athw8x.sys (athw8x + 1779)

  Follow-up: MachineOwner
  ---------

  3: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  UNEXPECTED_KERNEL_MODE_TRAP (7f)
  This means an interruption occurred in kernel mode, and it's a trick of nature
  that the kernel is not allowed to have/catch (bound trap) or that
  is always instant death (double fault).  The first digit of the
  bugcheck params is the number of the trap (8 = double fault, etc.)
  Consult an Intel x 86 family manual to learn more about what these
  traps are. Here's a * part * of these codes:
  If kv shows a taskGate
  Use .tss on the part before the sign colon, then kv.
  Otherwise, if kv shows a trapframe
  use .trap on that value
  On the other
  . Trap on the appropriate frame will show where the trap was taken
  (on x 86, this will be the ebp that goes with the procedure KiTrap)
  Endif
  Ko poster then the battery has been corrected.
  Arguments:
  Arg1: 0000000000000008, EXCEPTION_DOUBLE_FAULT
  Arg2: fffff88001a89cb0
  Arg3: fffff88017ebdf60
  Arg4: fffff8019354cef3

  Debugging information:
  ------------------

  BUGCHECK_STR: 0x7f_8

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

  Nom_processus: System

  CURRENT_IRQL: 2

  ANALYSIS_VERSION: 6.3.9600.17029 (debuggers (dbg). 140219-1702) amd64fre

  TRAP_FRAME: fffff88005f7f29f-(.trap 0xfffff88005f7f29f)
  Cannot read the trap frame to fffff880'05f7f29f

  LAST_CONTROL_TRANSFER: from fffff801934de769 to fffff801934df440

  STACK_TEXT:
  fffff880 '01a89b68 fffff801' 934de769: 00000000' 0000007f 00000000'00000008 fffff880 '01a89cb0 fffff880' 17ebdf60: nt! KeBugCheckEx
  fffff880 '01a89b70 fffff801' 934dc834: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiBugCheckDispatch + 0 x 69
  fffff880 '01a89cb0 fffff801' 9354cef3: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiDoubleFaultAbort + 0xb4
  fffff880 '17ebdf60 fffff801' 934de842: 00000000 00000000' fffff880 '17ebe8c0 fffff880' ffadadad 00000000' 05f7f29f: nt! KiDispatchException + 0xb3
  fffff880 '17ebe620 fffff801' 934ddef3: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiExceptionDispatch + 0xc2
  fffff880 '17ebe800 fffff801' 934d9cd5: fffff801'9354 b 402 fffffa80 '05f89a10 fffffa80' 04ebe90c 00000000' 00000000: nt! KiDebugServiceTrap + 0xf3
  fffff880 '17ebe998 fffff801' b 9354, 402: fffffa80'05f89a10 fffffa80 '04ebe90c 00000000' fffff801 00000000' 9354dbc9: nt! DebugPrint + 0x15
  fffff880 '17ebe9a0 fffff801' 9354dc8c: fffffa80 ' 05f89a10 fffffa80 '04ebe90c fffffa80' 0a04d9d4 fffff880 ' 05c2b717: nt! vDbgPrintExWithPrefixInternal + 0 x 132
  fffff880 '17ebeaa0 fffff880' 05c2b779: fffff880 '05f7f250 00000000' 00000200 fffff880 '05f7f250 fffff880' 17ebe700: nt! DbgPrintEx + 0 x 30
  "fffff880 '17ebeae0 fffff880' 05f7f250: 00000000 ' 00000200 fffff880 '05f7f250 fffff880' 17ebe700 fffffa80 ' 04ebe90c: athw8x + 0 x 1779
  fffff880 '17ebeae8 00000000' 00000200: fffff880 ' 05f7f250 fffff880 '17ebe700 fffffa80' 04ebe90c fffff880 ' 05d14f0f: athw8x + 0 x 355250
  fffff880 '17ebeaf0 fffff880' 05f7f250: fffff880 ' 17ebe700 fffffa80 '04ebe90c fffff880' 05d14f0f fffff880 ' 05ecc9f0: 0 x 200
  fffff880 '17ebeaf8 fffff880' 17ebe700: fffffa80 ' 04ebe90c fffff880 '05d14f0f fffff880' 05ecc9f0 fffff880 ' 17ebecf8: athw8x + 0 x 355250
  fffff880 '17ebeb00 fffffa80' 04ebe90c: fffff880'05d14f0f fffff880 '05ecc9f0 fffff880' 17ebecf8 fffff880' 00000000: 0xfffff880'17ebe700
  "fffff880 '17ebeb08 fffff880' 05d14f0f: fffff880 '05ecc9f0 fffff880' 17ebecf8 fffff880 ' 00000000 fffff880 ' 17ebecf8: 0xfffffa80'04ebe90c
  "fffff880 '17ebeb10 fffff880' 05ecc9f0: fffff880'17ebecf8 fffff880 ' 00000000 fffff880 ' 17ebecf8 00000000' 00000000: athw8x + 0xeaf0f
  fffff880 '17ebeb18 fffff880' 17ebecf8: fffff880 00000000' fffff880 '17ebecf8 00000000 00000000' fffffa80' 09ddb030: athw8x + 0x2a29f0
  fffff880 '17ebeb20 00000000 fffff880': fffff880'17ebecf8 00000000 00000000' fffffa80 '09ddb030 745f7874' 5f687461: 0xfffff880'17ebecf8
  fffff880 '17ebeb28 fffff880' 17ebecf8: 00000000 00000000' fffffa80 '09ddb030 745f7874' 5f687461 66756264'64617178: 0xfffff880'00000000
  fffff880'17ebeb30 00000000' 00000000: fffffa80'09ddb030 745f7874 '5f687461 66756264'64617178 65725f64' 6c6f6820: 0xfffff880'17ebecf8

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  athw8x + 1779
  fffff880'05c2b779?              ???

  SYMBOL_STACK_INDEX: 9

  SYMBOL_NAME: athw8x + 1779

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: athw8x

  Nom_image: athw8x.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 4fd9b1b4

  FAILURE_BUCKET_ID: 0x7f_8_athw8x + 1779

  BUCKET_ID: 0x7f_8_athw8x + 1779

  ANALYSIS_SOURCE: KM

  FAILURE_ID_HASH_STRING: km:0x7f_8_athw8x + 1779

  FAILURE_ID_HASH: {0903544c-cfac-6ee1-d1dc-387b7ac56f91}

  Follow-up: MachineOwner
  ---------

• Laptop to stop randomly and it says kernel mode trap

  whenever im in the middle of something my laptop stops

  It says kernel mode trap. it restarts... can't understand wat is it... Please help me... my it was not more than 2 months since I have this laptop

  desperate for solution en

  Original title: kernel mode trap

  Hello

  You really need to contact the seller and the manufacturer of system support. In OEM for system
  Maker is responsible for the functioning Windows and hardware. So no matter
  of cause, it is to solve. And it is under full warranty and may need repair or replacement.
  Keep in mind do you more they will say that it is something you have done. Added as
  even if you are somehow able to solve the problem you would still want it documented just in case where
  There are other related issues on the road.

  ==============================================================

  If you really want to solve the problem that I do not recommend to a new computer:

  In 'some' case will help this article.

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286

  Do not forget to check with support of system manufacturer (manufacturer of motherboard for custom
  online systems), their resources and the drivers and ask in their forums (if any)
  on known problems. Don't forget to update BIOS, drivers of low level chipset,
  and the other pilots of major on-board and separate devices. Those who alone can
  set all or part of these issues.

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the Office
  and the splash screen.

  Translate Windows 7 methods and use them on Windows 8/8.1

  Resolution of the blue screen in Windows 8/8.1 errors
  http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors
  
  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
  Start Windows (applies to Windows 8/8.1). If you cannot start Windows 8/8.1 try using
  a disk repair (see methods of doing a below) to access Mode without failure and other evil -.
  steps of shooting.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8/8.1).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available the onedrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also, Windows 7 and Windows 8/8.1)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  BCCode: 0x0000007f with the parameter 00000008 7f usually means a hardware problem.

  Have you added a hardware or drivers updated recently? Check Control Panel - Windows
  Updates to see if all drivers have been updated it just before what is going on has begun.

  For 7f - this could be a problem of material such as uncomfortable cards or memory, although it
  are other causes. Power electric low could also lead to this. Use the above troubleshooting utilities
  and below and when you get to the drivers and segments of memory see below then
  go back troubleshooting if necessary.

  If a PC remove ALL power. Opening the case, remove and reinstall all memory cards and ALL
  cable (try not just to close) on both ends if they are accessible and on the device ends if
  No (remove the cables and the relocation of their aid to eliminate minor corrosion). On a laptop
  on everything that can be done is to reinstall the memory.

  Notice the 08 (double fault) as 1st parameter means there are likely two causes. Do not forget
  to update your drivers manually by using Windows updates only detects certified pilots and
  Microsoft and the manufacturers are far behind in this process. Update the BIOS of the card NETWORK, WiFi, and
  Display/video and other important factors.

  If a laptop or a PC, you will need to take a shop (not BestBuy or other BigBox stores) or
  Support from the manufacturer of your system.

  --------------------------------------------------------------------------

  BCCode: 7F 0x0000007F which is the same as 0x1000007F

  UNEXPECTED_KERNEL_MODE_TRAP bug control has a value of 0x0000007F. This bug check indicates that the Intel CPU generated a trap and the kernel could not catch this trap.

  This trap might be a bound trap (a trap the kernel is not allowed to capture) or a double foul (an error occurred during the processing of an earlier fault, which always results in a failure of the system).

  Important info if you received a STOP Code
  
  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  UNEXPECTED_KERNEL_MODE_TRAP parameters

  The first parameter that is displayed on the blue screen indicates the number of trap.

  The most common trap codes are the following:

  • 0x00000000 or division by zero error, indicates that a DIV instruction is executed and the divisor is zero. Memory corruption, other hardware problems or software failures can cause this error.

  • 0 x 00000004, or overflow, occurs when the processor executes a call to an interrupt handler when the overflow (OF) is flag set.

• 0x00000005, or limits check fault, indicates that the processor, then executing a BOUND instruction, determines that the operand exceeds the specified limits. A BOUND instruction ensures that a signed array index is within a certain range.

• 0 x 00000006 or Opcode not valid, indicates that the processor attempts to execute an invalid instruction. This error occurs generally when the instruction pointer is corrupted and point to the wrong address. The most common cause of this error is hardware memory corruption.

• 0x00000008 or Double fault, indicates that an exception occurs during a call to the previous exception handler. In general, two exceptions are handled in series. However, there are several exceptions that cannot be handled serially, and in this case, the processor signals a double fault. There are two common causes of a double fault:
  • A kernel stack overflow. This overrun occurs when a cover page is hit, and the kernel tries to push a frame. Because there is no battery left, a stack overflow results, causing the double fault. If you think that this presentation has taken place, use ! thread to determine the limits of the stack, and then use KB (display Stack Backtrace) with an important parameter (for example, 100 KB) to display the full stack.
  • A hardware problem.

Less common trap codes are:

• 0x00000001 - a system call - debugger

• 0 x 00000003 - a breakpoint in the debugger

• 0 x 00000007 - a statement of material with no present coprocessor coprocessor

• 0x0000000A - has corrupted Task State Segment

• 0x0000000B - access to a memory segment that was not present

• 0x0000000C - access to memory beyond the limits of a stack

• 0x0000000D - an exception not covered by another exception; a protection fault concerning violations of access to applications

For other numbers of trap, see an Intel architecture manual.

Cause

0x7F bug check occurs after the installation of a faulty or incompatible hardware (including memory) or if installed hardware fails.

A double fault can occur when the kernel stack overflows. This overflow occurs if multiple drivers are attached to the same battery. For example, if two file system filter drivers are associated to the same stack and then again the recursively of file system, the capacity of the battery.

Resolution

Debugging: Always start by the ! analyze extension.

If this extension is not sufficient, use the debugger kv (display Stack Trace) command.

• If kv shows a taskGate, use the command .tss (display task State Segment) on the part before the colon.

• If kv shows a frame, use the command .trap (trap display frame) to format the shading.

• Otherwise, use the command .trap (trap Display frame) on the appropriate framework. (On x 86 platforms, this frame is associated with the procedure NT! KiTrap.)

After using one of these commands, reuse kv to display the new battery.

Troubleshooting: If you have recently added the material to the computer, remove to see if the error recurs. If the hardware failure existing, remove or replace the faulty component. Run the diagnostics of material that does not have the system manufacturer supplies to determine which hardware component.

The scanner memory is particularly important. Faulty or incompatible memory can cause this bug check. For more information on these procedures, see the manual of your computer. Check that all the cards in the computer are well calibrated. Use an ink eraser or electrical contact treatment, available in electronic supply stores, to ensure the adapter card contacts are clean.

If the error appears on a newly installed system, check the availability of updates for BIOS, SCSI, or card network controller. These updates are generally available on the Web site or the hardware manufacturer BBS.

Check that all hard disks, controllers, hard drive and the SCSI adapters are compatible with the installed version of Windows. For example, you can get information about compatibility with Windows 7 in the Windows 7 Compatibility Center.

If the error occurred after the installation of a new or updated device driver, you should remove or replace the driver. If, in this circumstance, the error occurs during the startup sequence and the system partition is formatted with NTFS, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console in order to access the file.

Also to restart your computer and press F8 to character-based menu that displays the choice of operating system. In the menu of Advanced Options , select the last known good Configuration option. This option is most effective when you add a single driver or service at a time.

Overclocking (setting of the CPU to run at a speed higher than the nominal specification) can cause this error. If you have overclocked to the computer that is experiencing the error, return the CPU to default clock speed setting.

Check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error. You can also disable caching memory BIOS to try to resolve the problem.

If you have encountered this error during the upgrade to a new version of the Windows operating system, the error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version. If possible, remove all third-party device drivers and system services and disable all antivirus before upgrade you. Contact the software manufacturer for updates of these tools. Also, make sure that you have installed the latest Windows Service Pack.

Finally, if all of the steps above do not resolve the error, take the system motherboard to a repair for the diagnostic facility. A crack, a scratched trace, or a defective component on the motherboard can also cause this error.

BCCode: 7F 0x0000007F which is the same as 0x1000007F<-- read="" this="">
* 1304.html http://www.faultwire.com/solutions-fatal_error/Run-a-System-diagnostic-Utility-supplied-by-your-0x1000007F-

===========================================================

It's my generic how updates of appropriate driver: (updating the video/display driver and BIOS)

This utility, it is easy see which versions are loaded: run DriverView - set the VIEW to hide
Microsoft drivers - update those without drain in their names (and BIOS and chipset).

-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.html

For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now click on
Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
Click on - uninstall - REBOOT it will refresh the driver stack.

Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.

Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.

Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.

Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

Windows 8/8.1 - hardware and drivers
http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

Windows 8/8.1 - Why Windows is not find my device?
http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

Windows 8/8.1 - what happens if a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

========================================================

Windows 8/8.1 includes special discount methods (keep files and settings) or a reset
(new installation remove all).

How to restore, refresh or reset your PC (Windows 8/8.1)
http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

How to update Windows 8 & 8.1
http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

How to reset Windows 8 & 8.1
http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

If you need a USB Flash Drive recovery or other methods:

How to create a recovery USB in Windows 8 & 8.1

http://www.eightforums.com/tutorials/5132-recovery-drive-create-USB-flash-drive-Windows-8-a.html

How to start on the "System Recovery Options" in Windows 8 & 8.1
http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-Windows-8-a.html

Boot to the tip "Startup parameters" in Windows 8 & 8.1
http://www.eightforums.com/tutorials/4924-advanced-startup-settings-boot-Windows-8-a.html

--------------------------------------------------------------------------------------

Tests of memory intercept all errors such as memory do not match (possible even for sticks
seemingly identical) and when the faster memory is placed in system behind the slower memory.
So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
show a problem.

To test the RAM here control - run 4 + hours or so.<-- best="">
www.memtest.org

For the Windows Memory Diagnostic tool.

WinKEY + W - type in the search-> memory box - find the top Memory Diagnostics tool
list - and follow the prompts.

Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
Diagnostic tool
http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

How to run the diagnostic tool for memory Windows 7 (and 8) - in Windows 8 the
the name is "Windows Memory Diagnostic".
http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

======================================================

After doing ALL the updates you can and if the problem persists, run DriverVerifier.
(Remember to use the methods Windows 8 posted at the top of the first answer above).

Driver Verifier can help find some BSOD problems:

Using Driver Verifier to identify issues with Windows drivers for users advanced
http://support.Microsoft.com/kb/244617

How to solve the problems of driver in Windows Vista or 7.
http://www.WinVistaClub.com/T79.html

Using Driver Verifier
http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

How to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngM

Driver Verifier
http://www.techsupportforum.com/2110308-POST3.html

Using Driver Verifier
http://www.faultwire.com/solutions/using_driver_verifier.php

How to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngM

You can disable the driver verifier
http://support.Microsoft.com/kb/244617

WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

BlueScreenView lets you know if there is a driver specified in the error message. Also check with
MyEventViewer at the blue screen.

If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I get an error of unexpected kernel mode.

  Original title: Mr President every time I connect to internet in my laptop my lappy automatically restarts and gives error like unexpected kernel mode please help me...

  whenever I connect to internet in my laptop my lappy automatically restarts and gives the error as unexpected kernel mode please help me...

  Hi dhameliyaketan,

  The driver may be the cause of the accident is the ndiskhaz.sys:

  Bugcheck 1000007F, {8, 81334000, 0, 0}

  Cannot load the image igdkmd32.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for igdkmd32.sys
  ERROR: Module load completed but symbols can be loaded for igdkmd32.sys
  WARNING: Unable to verify timestamp for k57nd60x.sys
  ERROR: Module load completed but symbols can be loaded for k57nd60x.sys
  WARNING: Unable to verify timestamp for ndiskhaz.sys
  ERROR: Module load completed but symbols can be loaded for ndiskhaz.sys
  Probably caused by: dxgmms1.sys (dxgmms1! VidSchiUpdateCurrentIsrFrameTime + ed)

  The ndiskhaz.sys seems to be a driver for Azzouzi HotSpot so try to uninstall Azzouzi HotSpot and see if the error resolves.

  If the error persists after return with the minidump files resulting.

• need help:(windows 8 plusieurs bsod se bloque c'est à dire.) memory management, irql not..., kernel mode...

  https://drive.Google.com/file/d/0B0ATyEKasqZmbkpPNG1WSXd0STA/edit?USP=sharing

  theres a link to all my minidumps.

  I don't know what to do, I have many BSODs in a row and then many times where I can use the computer for hours. It seems completely random. That this has something to do with the closures of power?

  Thank you!

  BUGCODE_USB_DRIVER (FE)

  This indicates that an error occurred in a bus universal series (USB) driver.

  3: kd > k
  Call child-SP RetAddr site
  fffff880'014f81e8 fffff880'0464 484 nt c! KeBugCheckEx
  fffff880 '014f81f0 fffff880' 04615ce2 USBPORT! USBPORT_ProcessURB + 0 x 36644
  fffff880 '014f8310 fffff880' 04615afd USBPORT! USBPORT_PdoInternalDeviceControlIrp + 0 x 52
  fffff880 '014f8360 fffff880' 047536f1 USBPORT! USBPORT_Dispatch + 0x17d
  fffff880 '014f83c0 fffff880' 047533ca usbhub! 0x1f1 + UsbhPdoInternalDeviceControl
  fffff880 '014f8430 fffff880' 0104f0a7 usbhub! UsbhGenDispatch + 0x9a
  fffff880 '014f8460 fffff880' 058f63b6 Wdf01000! imp_WdfRequestSend + 0x4b3
  fffff880'014f84f0 fffffa80'05468700 netr28ux + 0x9a3b6
  fffff880 '014f84f8 fffffa80' 0559db30 0xfffffa80'05468700
  fffff880 '014f8500 fffffa80' 055a 1020 0xfffffa80'0559db30
  fffff880 ' 014f8508 00000000 00000000 of ' 0xfffffa80 ' 055a 1020

  netr28ux.sys is the series of Ralink RT2870 USB802.11n driver wireless card (you can have another manufacturer).

  PAGE_FAULT_IN_NONPAGED_AREA (50)

  This indicates that invalid system memory was referenced.

  Bug control 0 x 50 usually occurs after the installation of a faulty hardware or installation failure of material (usually associated with defective RAM, either main memory, L2 RAM or RAM video cache).

  Another common cause is a defective system service installation.

  Antivirus software can also trigger this error, as can a corrupted NTFS volume.

  Bugcheck 50, {fffff12014494a90, 1, fffff803968f06f5, 2}

  Address fffff12014494a90 wrote in the statement to the address fffff803968f06f5.

  3: kd > r cr2
  Last set context:
  CR2 = fffff12014494a90

  The address of 1 parameter was stored in cr2 before calling the page fault handler.

  3: kd >! fffff12014494a90 pte
  GO fffff12014494a90
  PXE to the EPP of FFFFF6FB7DBEDF10 at FFFFF6FB7DBE2400 at FFFFF6FB7C480510 at FFFFF6F8900A24A0 PTE POE
  contains 0000000000000000
  not valid

  3: kd > dd fffff12014494a90
  fffff120'14494 has 90? ???????? ???????? ????????
  fffff120'14494aa0? ???????? ???????? ????????
  fffff120'14494ab0? ???????? ???????? ????????
  fffff120'14494ac0? ???????? ???????? ????????
  fffff120'14494ad0? ???????? ???????? ????????
  fffff120'14494ae0? ???????? ???????? ????????
  fffff120'14494af0? ???????? ???????? ????????
  fffff120'14494 b 00? ???????? ???????? ????????

  Of the above, we can see that the address fffff12014494a90 is indeed invalid. That being said, why fffff12014494a90 try to write in fffff803968f06f5?

  3: kd > kv
  Child-SP RetAddr: Args to child: call Site
  fffff880 '09db76f8 fffff803' a 969385, 0: 00000000'00000050 fffff120 '14494a 90 00000000 00000001' fffff880' 09db78e0: nt! KeBugCheckEx
  "fffff880 '09db7700 fffff803' 968b1acb: 00000000 ' 00000001 fffff120" 14494a 90 fffffa80 '07a14b00 fffff803' 968c0db0: nt! : FNODOBFM: 'string' + 0x33e2a
  "" fffff880 '09db77a0 fffff803' 96874eee: 00000000 ' 00000001 fa80041a ' b89004c2 fffff680 ' 36587700 fffff880 ' 09db78e0: nt! MmAccessFault + 0x55b
  fffff880 '09db78e0 fffff803' 968f06f5: fffff803 ' 9684f363 fffffa80 '041ab868 06cafaf0' 06cafaf0 fffffa80 ' 07a 05010: nt! KiPageFault + 0x16e (TrapFrame @ fffff880'09db78e0)
  fffff880 '09db7a78 fffff803' 9684f363: fffffa80 ' 041ab868 06cafaf0 '06cafaf0 fffffa80' 07a 05010 fa80041a ' b89004c2: nt! MiResolveDemandZeroFault + 0x5
  "fffff880 '09db7a80 fffff803' 968b1e1c: 00000000 ' fffffa80 00000000 '07a14b00 fffff880' 09db7b80 fffffa80 ' 0615b 568: nt! MiProtoFault + 0x1a3
  fffff880 '09db7b00 fffff803' 96874eee: 00000000'00000000 00000000' 550280cb 0000006c 'af0ef501 fffff880' 09db7c40: nt! MmAccessFault + 0x8ac
  fffff880 '09db7c40 000007fd' c1ee0a00: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiPageFault + 0x16e (TrapFrame @ fffff880'09db7c40)
  0000006c 'af0ef530 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: 0x000007fd'c1ee0a00

  3: kd > .trap fffff880'09db78e0
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  Rax = 0000000000000002 rbx = 0000000000000000 rcx = 0000000000000000
  RDX = fffff8a00a6dd000 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = fffff803968f06f5 rsp = fffff88009db7a78 rbp = fffffa8007a14b00
  R8 = 0000000000000000 r10 = fffff8a00a6dd000 fffff6fc500536e8 = r9
  R11 = 0000000006cafaf0 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv up ei pl zr po nc
  nt! MiResolveDemandZeroFault + 0 x 5:
  fffff803'968f06f5 4 c 89442418 mov qword ptr [rsp + 18 h], r8 ss:fffff880'09db7a90= fffffa8007a05010

  Address to education, we failed on, fffff803'968f06f5 deferenced RER + 18 h where rsp + 18 h is fffff88009db7a78. This would result in a write from memory at the address fffff880'09db7a90.

  3: kd >! PTE fffff880'09db7a90
  GO fffff88009db7a90
  PXE to the EPP of FFFFF6FB7DBEDF88 at FFFFF6FB7DBF1000 at FFFFF6FB7E200270 at FFFFF6FC4004EDB8 PTE POE
  contains 0000000000624863 contains 0000000000623863 contains 0000000038208863 contains 800000004123C 963
  GetUlongFromAddress: cannot read fffff80396b750e4
  NFP 624 - DA - KWEV NFP 623 - DA - KWEV NFP 38208 - DA - KWEV NPF 4123c - G-DA - KWEV

  3: kd > dd fffff880'09db7a90
  fffff880'09db7a90 fffffa80 b89004c2 fa80041a a 07, 05010
  fffff880' 96b6e700 00000000 00000011 fffff803 09db7aa0
  fffff880'09db7ab0 a927a274 ffff2ad2 c0000016 00000000
  fffff880'09db7ac0 fffff880 afaf0000 0000006c 09db7c40
  fffff880'09db7ad0 fffff880 afaf0000 0000006c 09db7c40
  fffff880'09db7ae0 00000000 00000000 fffff8a0 0a6dd000
  fffff880'09db7af0 00000000 968b1e1c fffff803 c0000016
  fffff880'09db7b00 00000000 00000000 fffffa80 07a14b00

  Right, so code wanted to write to fffff880'09db7a90 which, as we can see above is a valid address. The 1st parameter and cr2 however note that we have not written to the address fffff12014494a90.

  nt! MiResolveDemandZeroFault said the material to write in fffff880'09db7a90 (who once again of incidentally is a completely valid address), and the material came back and said 'I can't write fffff12014494a90.

  However, this seems very material right here - nom_processus: avgrsa.exe is an associated AVG process at the time of the accident.

  MEMORY_MANAGEMENT (1A)

  This indicates that an error occurred serious memory management.

  Error checking 1 a, {5003, fffff70001080000, 620, 62200000 c 50}

  -1 setting of the bug check is 5003 which lists free work is corrupt. It is usually a hardware error, however, a device driver causing corruption is possible as well at times.

  ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (CF)

  This indicates that an attempt was made to execute non-executable memory.

  KMODE_EXCEPTION_NOT_HANDLED (1e)

  This indicates that a kernel-mode program generated an exception which did not catch the error handler.

  3: kd > k
  Call child-SP RetAddr site
  fffff880 '02af70b8 fffff801' da400c56 nt! KeBugCheckEx
  fffff880 '02af70c0 fffff801' da34c4bd nt! KiFatalExceptionHandler + 0 x 22
  fffff880 '02af7100 fffff801' da3743d4 nt! RtlpExecuteHandlerForException + 0xd
  fffff880 '02af7130 fffff801' da34e216 nt! RtlDispatchException + 0 x 458
  fffff880 '02af7840 fffff801' da2df842 nt! KiDispatchException + 0 x 455
  fffff880 '02af7f00 fffff801' da2dd59f nt! KiExceptionDispatch + 0xc2
  fffff880 '02af80e0 fffff801' da461287 nt! KiInvalidOpcodeFault + 0x11f
  fffff880 '02af8270 fffff801' da31cfe4 nt! : FNODOBFM: 'chain' + 0 x 16175
  fffff880 '02af8360 fffff880' 052d50f4 nt! KeSetEvent + 0x1c3
  fffff880 '02af83d0 00000000 fffffa80' netr7364 + 0x320f4
  fffff880'02af83d8 fffffa80 '0xfffffa80 00000000' 00000000
  fffff880 '02af83e0 fffffa80' 06de3152 0xfffffa80'00000000
  "fffff880'02af83e8 fffffa80 ' 07039808 0xfffffa80 ' 06de3152
  fffff880 '02af83f0 fffffa80' 06de3018 0xfffffa80'07039808
  fffff880 '02af83f8 ' 00000003 00000004 0xfffffa80' 06de3018
  "fffff880 '02af8400 00000000' 00000026 0 x 00000003 00000004"
  fffff880 '02af8408 fffffa80' 06e08580 0 x 26
  fffff880 '02af8410 fffffa80' 0688a 038 0xfffffa80'06e08580
  fffff880 '02af8418 fffffa80' 06dade40 0xfffffa80'0688 has 038
  fffff880 '02af8420 fffffa80' 06df6d10 0xfffffa80'06dade40
  fffff880 '02af8428 fffff880' 052aae7a 0xfffffa80'06df6d10
  fffff880 '02af8430 fffffa80' 06e00000 netr7364 + 0x7e7a
  fffff880 '02af8438 fffffa80' 0688 to 000 0xfffffa80'06e00000
  "fffff880'02af8440 fffffa80 ' 00000066 0xfffffa80 ' a 0688, 000
  fffff880 '02af8448 fffffa80' 0000013a 0xfffffa80'00000066
  fffff880 '02af8450 fffffa80' 06de3018 0xfffffa80'0000013 has
  fffff880 '02af8458 00000000' 0000000 0xfffffa80 a' 06de3018
  fffff880 '02af8460 fffffa80' 0688a 000 0xa
  fffff880 '02af8468 fffff880' 03ce647c 0xfffffa80'0688 has 000
  fffff880 '02af8470 00000002' 00000122 usbehci! EHCI_SubmitTransfer + 0 x 88
  fffff880 '02af84b0 0000057f' f8f2a800 0x00000002 "00000122
  fffff880 '02af84b8 fffff880' 010386be 0x0000057f'f8f2a800
  fffff880'02af84c0 fffff880'053088 Wdf01000 5 c! imp_WdfRequestReuse + 0x19a
  fffff880 '02af8530 fffffa80' 070d57f0 netr7364 + 0x658c5
  fffff880 '02af8538 ffff0000' 079b03f3 0xfffffa80'070d57f0
  fffff880 ' 02af8540 00000000 00000000 of ' 0xffff0000 ' 079b03f3

  netr7364.sys again.

  FAILURE_BUCKET_ID: 0x1E_c000001d_BAD_IP_netr7364 + 320f4

  It looks like a bad instruction pointer.

  -------------------------

  1. remove and replace AVG with built-in Windows Defender from Windows 8 for temporary troubleshooting purposes because it can cause conflicts NETBIOS:

  -AVG removal http://www.Avg.com/us-en/utilities

  Windows Defender (how put on after the withdrawal)- http://www.eightforums.com/tutorials/21962-Windows-Defender-turn-off-Windows-8-a.html

  2 if the above fails, please run Memtest for no. LESS than ~ 8 going on (several hours):

  Memtest86 +:

  Download Memtest86 + here:

  http://www.memtest.org/

  Which should I download?

  You can either download the ISO pre-built you want to burn to a CD and then boot from the CD, or you can download the automatic installer of the USB. What this will do is format your USB drive, make a boot device and then install the necessary files. Both do the same job, it's just you that you choose, or you have available (be it CD or USB).

  Note that some older generation motherboards do not support USB boot, your only option is CD (or floppy if you really wanted to).

  How Memtest works:

  Memtest86 writes a series of test patterns for most of the addresses of memory, reads the written data and compares it to find errors.

  The default pass is 9 different tests, varying in the modes of access and test data. A tenth test, bland, is selectable in the menu. He wrote all the memory with zeros, then sleeps 90 minutes before checking to see if the bits have changed (perhaps because of refresh problems). This is repeated with all those for a total time of 3 hours by pass.

  Many chipsets can report RAM speed and timings by SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclockee, Memtest86 can test that memory is free of error with these faster settings.

  Some hardware is able to report the status of the "PAT" (PAT: active or PAT: disabled). This is a reference to the Intel performance acceleration technology; There may be the BIOS settings that affect this aspect of memory synchronization.

  This information, if it is available for the program, can be displayed via a menu option.

  Other questions, they can most likely be answered by reading this excellent guide here:

  http://Forum.canardpc.com/threads/28864-FAQ-please-read-before-posting

  Kind regards

  Patrick

• Satellite Pro L300 shows ACPI ATK0100 Kernel Mode Driver error

  I have a Satellite Pro L300 with Windows Vista and it has been fickle to say the least, making me restart the system several times.
  The last two times she since continued to come up with an error message saying "cannot open ACPI ATK0100 Kernel Mode Driver", and I understand that it is perhaps what is originally that there problems later.

  I tried updating the BIOS, reinstall the drivers and, seeking answers and, of course, reinstall the whole system, but I still get this message every time I turn on my laptop and I really don't want that it gives me the blue screen of death again - please help me!

  Thank you.

  Stand by.

  You ve done clean install of Vista with initial recovery DVDs and you get this error in any case (no additional software is installed)?

• Satellite U400 (PSU44E) - ACPI ATK0100 Kernel Mode Driver missing

  Satellite U400-17V (PSU44E)

  I received my upgrade of Windows 7 at Toshiba with the included DVD upgrade. I did everything exactly what is said in the booklet.

  After completing the upgrade process and after turning on the laptop I got the message saying:
  Can not find an ACPI ATK0100 Kernel Mode driver

  What should I do?

  Best regards
  Tan Tunc

  Hello

  I started a thread on the same subject:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=126340

  So for me it sounds like this, you should try to reinstall Windows again. After that, the problem should be solved.

  Search with Google, you can find enough discussion about it. Reinstalling Windows can solve this problem.