Unexplained delay launch Applications (two issues)

Similar Questions

• Intel delayed Launcher

  What is Launcher delayed Intel and it must be enabled at startup?    Thanks in advance

  Gator957,

  The 'iastoriconlaunch.exe' or 'delay Launcher' Intel is a startup application, which is part of the Intel quick resume technology. It is recommended to keep this process enabled at startup.

  Learn more about this executable below...

  http://startups.GlarySoft.com/IAStorIcon/IAStorIconLaunch.exe/52327/

  http://www.herdprotect.com/iastoriconlaunch.exe-87b6e7fcf05f4f23aac6262d956f30891fbf9b34.aspx

  http://Windows.fyicenter.com/2474_Windows_8_Startup_IAStorIconLaunch.exe_Startup_Delayed_.html

• Launching applications from partition Bootcamp without starting the virtual machine

  Hi all, installed Fusion because my colleague was furious about how you can launch applications without even opening the windows. But I was not able to do. I use a Bootcamp partition and is not, and I'm assuming that this is the reason why this feature is not available for me, but if someone could shed some light on this would be great!

  Thank you

  I think that your colleague is a bit confused. By definition, any product of virtualization to run a prompt to perform a request for comments. If you start in Unity mode, you might see Windows not running, but it's there. I suspect that what your colleague is talking about is the suspension in Unity mode. If you then start a Notes application, the virtual machine will resume, and since it is in Unity mode, it will appear to run the comments without Windows display application.

  Run a Boot Camp virtual machine means that you can not suspend (or snapshot, but that is irrelevant to this issue) because this can lead to corruption of the disk.

• Calendar in El Capitan can launch applications as scheduled events... No work around?

  After upgrading to El Capitan of Lion (10.7.5) - I jumped over the Mountain Lion, the Mavericks and the Yosemite - now I'm missing a very important feature in the new calendar (iCal formally): it cannot launch applications such as events scheduled at set intervals.

  I also absolutely do not remove the possibility that it is me who is a bad thing.

  In some other forums people suggest to uncheck calendars in iCloud settings and then create a local calendar (and name it for example "on my Mac") who should be able to launch applications and then synchronize the calendars in iCloud again.

  Unfortunately, as soon as I uncheck calendars in iCloud, the application calendar itself does not create new calendars at all - local or not.

  I'm doing something wrong? If not, is there perhaps a workaround?

  Any help will be greatly appreciated!

  Use Automator to create a calendar alarm clock that would launch the applications.

  When you open the automate, create a new Document.

  Choose the type of alarm calendar.

  Stretching the library of utilities in an action to launch the Application. Set this to the application you want to run.

  Save it and it will create a local calendar with an event in its operation this alarm clock calendar. You can then handle this event.

• Launch application on KeyPress sequence - Code example included

  I searched this forum and google hours and could not get it to work.

  I used this thread:

  http://supportforums.BlackBerry.com/T5/Java-development/launch-application-on-12345/m-p/502771

  I have a background process which is a PhoneListener.

  It intercepts the void callInitiated(int callid) and checks the sequence.

  If the sequence is the right one, she injects an end key and starts the application.

  There are 2 problems:

  (1) the dialed number appears with? prefix and I can't seem to find the right channel for the game.

  (2) if I inject end, the call ended, but so is my application that I just launched.

  I tried waiting and I tried the function calls but no dice the reorganization.

  public void callInitiated(int callid) {
  
          String dialedNumber = Phone.getCall(callid).getDisplayPhoneNumber();
          System.out.println("!!!!!!!!!!!!  Dialed:" + dialedNumber.length());
  
          if (true || dialedNumber.endsWith(KEY_SEQUENCE)) {
  
              // end the call
          //  EventInjector.KeyCodeEvent ev = new EventInjector.KeyCodeEvent(EventInjector.KeyCodeEvent.KEY_DOWN, ((char)Keypad.KEY_END), KeypadListener.STATUS_NOT_FROM_KEYPAD);
          //  EventInjector.invokeEvent(ev);
  
              final UiApplication app = UiApplication.getUiApplication();
              app.invokeLater(new Runnable() {
                  public void run() {
                      try {
                          Thread.sleep(20);
                      } catch (InterruptedException e) {
                          e.printStackTrace();
                      }
                      try {
                          ApplicationManager.getApplicationManager().launch(
                          "MyApp?gui");
                      } catch (ApplicationManagerException e) {
                          e.printStackTrace();
                      }
                  }
              });
  
          }
      }
  

  any help?

  Thank you

  He solved.

  for some reason, the callInitiated (.) is called several times for each call

  Make sure that your code to initiate and end the call is executed only once (I used a hashtable and stored the callid) and you're golden.

• I paid £8,57 for photoshop cc 2015 already. I have a cornfirm email to buy site why I cannot accese to my App. how I can do but I'm not paying for this application two times per hour, I said... Thank you

  I paid £8,57 for photoshop cc 2015 already. I have a cornfirm email to buy site why I cannot accese to my App. how I can do but I'm not paying for this application two times per hour, I said... Thank you

  Check your account indicates the subscriptions that you expect (and that the adobe, used in the next step id is correct) by logging in here and checking the status of your subscription, https://www.adobe.com/account.html

  then, if it's current, disconnect and then back to your client application using the adobe with the link above in cc id: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  If you don't have the cc desktop application, retrieve it and use it to install your programs cc/tests, https://creative.adobe.com/products/creative-cloud

• Launch applications published in the workspace of the internet 2.0

  Hello

  I can't launch applications published in the workspace of the internet 2.0. When I open an application opens a client application to view my horizon and the error message "error: host name cannot be resolved"appears. "

  I have access to the workspace via the internet on a load balancer (ZEN). I configured both connectors. One for connecting internal Kerberos authentication with external authentication with password authentication. This works well. From the local network, it works like a charm.

  Do I have to give the Horizon view connection manager a public IP address?

  Another (or maybe THE) problem is on the balancer FQDN/SSL setting. The FULL domain name is the portal.domain.com. Load Balancing is done via the internet with the same accessible URL. When I select the option "Load Balancer" in the workspace Configurator, it copies the CA certificate root of LB all go, restart the Tomcat server and then the page throw me back to the original page where the button load balancer is not selected. I get no error message and in the newspapers, I see only errors. You guys have an idea what I am doing wrong?

  Kind regards

  Andreas

  Yes, the Horizon view connection server must be solved also (must be a public IP address for this)

• browser launch application problem

  Hello
  In order to launch a browser from an application, I used the code snippet of this
  page:

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800440/How_To _...

  Everything I do is provide my own url for it and run it. It works very well and has
  was working fine until recently. A number of customers complained
  receive the following error message:

  Eception exception: net.rim.device.api.system.ControlledAccessException

  In the hunt for the cause, I have tried on a number of different devices.
  Including OS versions:

  Rogers Blackberry 8700 v4.2.1 - works fine
  Rogers Blackberry 8800 v4.2.1 - works fine
  Rogers Blackberry 8310 v4.2.2 - works fine
  Bell Blackberry 8830 v4.2.2 - above displays error
  Bell Blackberry 8130 v4.3.0 - above displays error

  I tried the device simulators:
  v4.2.2.123 Bell 8830
  4.3.0.07 uscc 8130
  and they both worked fine.

  We're going a little crazy here trying to figure out the cause. If it's not OS
  linked version, maybe that's a problem of provider?
  Is there a known issue with Bell relating to the safety of the launch of the browser
  applications? Is there a work around?

  Thank you

  OK problem solved. Lancéo has got to me referring to the document that I originally brought it up. I just stumbled on the wording. It did not clear in the document that extract of code belonged to which version. In addition, a some devices running v4.2.2 colleagues was not the problem. Where as the document basically says that she should have. I should still try.

  So I have now two versions of the same application. The snippet of code on the bottom of the document

  is used for versions 4.2.1 below. Initially, the code snippet is used to 4.2.2 and more.

  Thanks again for all of you who have posted.

• Satellite S50-B-15 q - two issues after the installation of Win10

  Hello

  I have a big problem with my "FN" key It's the switch... Normally I do not press "Fn" to increase volume, brightness... But since windows 10 I have to press "Fn" and me cannot solve the problem. I tried many solutions but no result.

  I also have the problem with the "Pc HEALTH MONITOR" application, while installation a displays an error message on the windows 'Does not support' and I can't solve the problem.

  Can you help me please?
  Thank you

  You updated the drivers and software for win 10 compatible version?
  Here you can find the Win 10 drivers that must be installed:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  FN key issue:
  The special function mode button controls this feature of the laptop.
  You can enable or disable this within the Toshiba HWSetup or in the BIOS.

  More information:
  http://APS2.toshiba-tro.de/KB0/HTD2503B90001R01.htm

• Siri set timers or alarms or launch applications...

  I have a brand new 6 iPhone more and Siri cannot set timers or alarms! I have 'reset network settings' and it worked fine until I reconnected it to my wifi at home and then it stopped working again. To be clear, she can still give me time and make calculations, but she cannot set timers, alarms or the applications to launch, or God knows what else! It will not work even if I then drop the wifi network and switch back to LTE... So what am I, I expected to see, reset the network settings and then never use my router brand Apple once again?... Can I connect my phone to iTunes and reset it and all my passwords and settings AGAIN get new pending that all my applications and data to download just so it MIGHT work? (probably won't!) It's just absolutely ridiculous! So I'm dissatisfied and annoyed! I don't have time for this! Why on earth are there a few annoying bugs much like that on a phone I paid more than $900 for! In addition, it's actually the second 6 s more that I received, as the first I had to return and Exchange because the volume knob didn't work and something to another hardware or software-related was wrong, because the apps acted upward and games were CONSTANTLY gel... But that's another story... My problem is with this new phone that works very well outside Siri not currently able to set timers or set alarms or applications launch or God knows what else... Anyone got any quick suggestions or advice? Help, please!

  Soft reset on my phone (which is held the "home" button and the button sleep/wake until it stops and the apple logo appears) and now it works again. I hope this helps someone else who is having this very annoying problem! Before, I had tried "reset network settings" but which did not help at all. The soft reset hope it lasts...

• Application installation issues Manager. Help, please.

  try to update "Application Manager" or receive the actual program - Programs / Administrative Tools / Services of Componet / Application Manager. The machine I'm working on is a HP Mini, which has a NT arcitecture with Windows XP operating system.

  Right now I'm too frusterated to go back and find accurate information for designations of NT and XP version #.

  In addition, this machine runs on a prayer in its present condition.

  The machine has two percent of disk space left and can't do any fragment of disc or other maintenance admin I added zero anything to the machine, is loaded into the gills. Bloat!

  I see that there are two access points to the Services and it is not an alias.  Demand Managent allows deletion of and installation of applications and programs. When the user clicks the Start button, it is an attempt to turn it on and an error code 126 is generated.

  While in Services and by clicking Help, help title is Microsoft Management Console. I can not re find instructions in there at the time of writing, still - help on the machine directed me to Action / properties and the configerations in there. While there, the exicutabe # C:\WINDOWS\system32\svchost.exe k netsvcsle - the pound sign is mine.

  Somehow when I take the path of this file and place it in a search on the machine there is no result. I clicked on a link in the Help window provided with the title of Microsoft Management Console that is written to a date up to Microsoft Management Console 3.0 and found an XP update and did and when the window of consecative came, I was not ready to have a location for the directory or files to place a date in my brain.

  It's really frusterating. Is there a healthy way of mind to get the snap of application management in place and work to get rid of the bloated mess. I have been hunting the GOOSE on that for several days with stress and I start to go Postal.

  I understand that application management is considered to be a ' wink to ' Application Management allows to install and remove Applications and etc.

  I do not understand as to why application management is not installed in the first place.

  Thank you

  Hello

  Try the methods provided below and check if the problem persists.

  Method 1:

  Step 1:

  (a) open a command run and first try to unregister the DLL/file

  (b) regsvr32 /u appmgmts.dll

  (c) then on the command run again trying to re - save these files:

  regsvr32 /i appmgmts.dll

  regsvr32 appmgr.dll

  Step 2:

  Be sure also to that this service is running in the services control panel:

  (a) click on run

  services of Type b). MSC and b make sure that the service is started:

  (c) application management Service

  Method 2:

  You can run the System File Checker to repair system files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  See also:

  How to make a computer faster: 6 ways to speed up your PC

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

• Launch application on the debugger device restarts the device

  I'm trying to debug an application on the device. I had some initial success, but lately that the machine restarts when the debugger tries to run the application. The application is installed, and I can run from the device after restarting the device, but so far I can't get it to work under the debugger.

  
  

  Configuration

  Feature: 9700

  OS: v5.0.0.602

  Eclipse: Galileo (3.5.2)

  BlackBerry Java plug-in: 1.1.2.201004161203 - 16

  BlackBerry SDK: 5.0.0.25

  -rich

  I think that I found a solution to this problem. I tried the suggestion to remove the application Options. Applications on the device. It turns out that it has not completely removed the application. Some library modules remained behind. I was able to remove these Desktop Manager. It is a bit heavy treatment, but it's me unblocked for debugging on the device.

  I hope that RIM will provide us with a better debugging experience in the future. It would be nice if the reset of the device were not necessary, but I guess that's in some scenarios. For the latter, the debugger must tolerate the delay in the connection because of reset. It would also be nice to be able to attach the debugger to a running application. IIRC, it was available in the old JDE SDK.

• Ripple Emulator - construction and launch - no launch - Debug token issue

  It's a piece of help and advice for you all so fall you on this

  After you install the emulator of ripple correctly using the download here:

  https://developer.BlackBerry.com/HTML5/download/ripple

  And don't forget to follow this document:

  https://developer.BlackBerry.com/HTML5/documentation/ww_getting_started/Use_the_Ripple_emulator_Chro...

  I got a job of waving emulator.

  Also I could pack my application, but try to launch it directly on my device BB10 Dev Alpha never happened.

  No error displayed I had no idea.

  Using the graphic help trying to install the created device / .barhe told me that the author does not match the token author correction.

  Which is strange, I had copied this author name 1-on-1 for the config.xml file.

  After doing a manual generation using the. / bbwp v1.0.0.7 BlackBerry WebWorks SDK resources, I have seen that he has failed to get the debugging token.

  As I had not seen anything in the documentation I took a wild guess and copied on my debugtoken in the same directory the. / tool bbwp resided.

  This corrected the manual version and also the option Package and laugh in the emulator to ripple.

  If the solution is to copy the peripheral debugtoken BB10 Dev Alpha V1.0.0.7 of SDK BlackBerry WebWorks directory.

  If this is something that must also be saved in the incident handler, please let me know.

  Hope this helps some of you running into the same wall.

  To solve the problem that the package one implemented does not when you deploy directly to your BB10 Dev Alpha device, copy the file debugtoken.bar in the directory of BlackBerry WebWorks SDK V1.0.0.7 where als othe. / bbwp resides.

• Error launching application with Service Ad

  Hello

  I'm integrating the ad to my application service.

  Right now, I have more documentation to create app demo for it.

  I get "java.lang.NoClassDef Error Found" as soon as I run my application.

  Here is the code I use:

  package mypackage;
  
  import net.rim.device.api.ui.UiApplication;
  
  /**
   * This class extends the UiApplication class, providing a
   * graphical user interface.
   */
  public class MyApp extends UiApplication
  {
      /**
       * Entry point for application
       * @param args Command line arguments (not used)
       */
      public static void main(String[] args)
      {
          // Create a new instance of the application and make the currently
          // running thread the application's event dispatch thread.
          MyApp theApp = new MyApp();
          theApp.enterEventDispatcher();
      }
  
      /**
       * Creates a new MyApp object
       */
      public MyApp()
      {
          // Push a screen onto the UI stack for rendering.
          pushScreen(new MyScreen());
      }
  }
  

  See also this warning

  C:\Eclipse_BB\ads\For_Post6.0.0\net_rim_bbapi_adv_app.jar(net_rim_bbapi_adv_app-1. COD): WARNING! : import a file is marked not analyzable
  net.rimlib.blackberry.api.advertising.app.Banner: WARNING! : not found definition

  What I'm missing here?

  I build my application using OS 6.0

  I tried to run the app on 9800 Simulator as well as on the OS 7.0 device 9860

  For both I get the same error.

  How to test the sample application on the Simulator and the device?

  I posted same post here as well

  http://supportforums.BlackBerry.com/T5/BlackBerry-advertising-service/error-launching-app-with-ad-se...

  But I think that it is a nuisance java.

  Thank you

  Afonso Tyagi

  Its market not now

  I lacked control and export the jar file

• How to prevent the launcher application

  Hello

  I want to block any application to launch. Suppose I'm clicking on a native application such as Blackberry Messenger. So I want to prevent that application to run through my code. What API should I use and how?

  Thanks in advance

  Welcome on the support forums.

  what you want to do is not possible with the API. However, you can get something similar:
  http://StackOverflow.com/questions/1984524/BlackBerry-create-an-application-which-will-lock-another-...