Unfortunately, the android.process.media process is stopped.

Similar Questions

• Windows Media Player closes whenever I open it with the message "Windows Media Player has stopped working"

  Hello

  I have a XC of Aspire Acer-605, i5 with Windows 8 (bought 4 weeks ago)

  When I open Windows Media Player 12, if I play music or not, in less than a minute, a box appears that says:

  "Windows Media Player has stopped working: a problem caused the blocking of the program works correctly." Windows will close the program and notify you if a solution is available.

  The only option then is to click on "close the program".

  When I try to listen to music on CyberLink Power Media Player 12. I have the pop box saying:

  "Play.exe stopped working: Please send us this report to help us solve the problem and improve this software."

  The option only two then are "CANCEL" or to type my email and the problem then click on 'send report '. I did the second and nothing heard back.

  XBOX media player works, but I don't want to use it.

  I already scanned with McFee virus and it found nothing. I recently remove a virus from my computer. The problems may have started after that.

  Can you help me to solve my problem?

  After days and days of the trial, an online chat with a technician Microsoft (which was useless) I finally found a suggestion that worked... I had to create a new user account with administrative privileges. Media worked perfectly in this new account! I then spent ages downloading the files from my old account before deleting completely. It took a long time and has been a real pain, but at least it works now :-). Good luck to all. I hope this works for you xx

• MacBook pro starts the process but stop before midway lights

  HI -.

  My MacBook Pro starts the boot process but stops and stops before reaching the point to halfway. This can be the result of something that I did yesterday, I disabled my MacBook during a software update. I don't know what has been updated.  (I've left for a few hours and would not leave my computer on while I was out.)

  Is there something at home, I can do to fix this?

  Thank you!

  If you do not know what has been updated, nor do we. Could have been a critical system component. Try to start in Safe Mode and see if that clears up the problem. If this is not the case, start in Recovery Mode, select disk utility and make a disk first aid. If that doesn't work or you can't get into Recovery Mode, then try Internet Recovery Mode, while the Mac is connected to the Internet (press Command + Option + R) so it starts off Apple servers and reinstall OS X. If all goes well, you won't lose too much data.

• MS Updates caused problems "Media Center has stopped working"

  After the MS Updates this week, we have a problem with our Media Center. We have a HP Touchsmart IQ526 running Vista Home Prem when are connected to the Internet and our local cable system. Everytyhing worked almost without problems because we have installed in January. After that MS Updates this week required a reboot, Media Center stops whenever we change the channel - errors "Media Center has stopped working".  Sometimes when changing positions both with the remote control and with the mouse. Is there anything other than a reinstallation of Vista?  Can you help us?

  Hello Cwray

  Please write to the Microsoft Forums.

  This error message can occur if there is some system files corrupted on your computer. I suggest that scan you a file system [SFC] checker on the computer that would be a search for system files corrupted on the computer and replace them.

  (A) the SFC scan enforcement procedure:
  1. click on the Start button
  2. on the Start Menu, click all programs followed by accessories
  3. in the menu accessories, right-click on command line option
  4. in the drop-down menu that appears, click the "Run as Administrator" option
  5 If you have the enabled User Account Control (UAC) you will be asked to consent to the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.
  6. in the command prompt window, type: sfc/scannow then press enter
  7. a message is displayed to indicate that "the analysis of the system will start.
  8. be patient because the analysis may take some time
  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue
  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.
  11 after the scan finished, close the command prompt window reboot the computer and check.
  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista.
  For more information please visit the link below.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212

  Check whether the problem is resolved.

  B. I also suggest you to rebuild the Media Center data store.
  To do this, follow these steps:
  1. Click Start, type run in the start search box, then click on run in the list programs.
  If you are prompted for an administrator password or for confirmation, type the password, or click on continue.
  2. in the Open box, type % systemdrive%\programdata\microsoft\ehome, and then click OK.
  3. in the details pane, right-click right mediacenterdatastore.db and then click Rename.
  4 rename the file in mediacenterdatastore.old
  5. run the file, %systemdrive%\Windows\eHome/mcUpdate.exe
  6. launch windows media center.

  Click on the link below to get more information on media center.
  http://thegreenbutton.com/forums/default.aspx

  C. I also suggest you to check the boot and if you are able to access the Windows media center.
  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. Boot stops interference with other third-party software on the computer.
  Steps to perform the clean boot:
  1. click on start, type msconfig in the search box and press ENTER to start the System Configuration utility. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.

  If the problem is solved, check what is the cause of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.

  When you are prompted to restart the computer, click on restart.

  It may be useful
  Thanks and greetings
  Support Microsoft-dieng
  Visit our Microsoft answers feedback Forum and let us know what you think
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/

• Satellite U400 - problems with the Panel, the touch and media keys

  Hello, I have the TOSHIBA Satellite U400. Everything's a lot but I have some concerns.

  1. the touch screen (media buttons on the top of the keyboard - mute-media-play/pause-stop-rewind-forward-) turn
  the computer running if you touch! How to stop that from happening? I only need to use the POWER button.
  Start button / stop is sufficient.

  2. press MUTE on the touchscreen, no its not really "mute" or "disable." Instead, she don't
  is the Tower the White Glow Light for all Touch Panel ON and OFF (including the word "SATELLITE").
  How can I make it works?

  3. When you connect to Windows, I can choose between the password or RECOGNITION of FACES. How do I
  Assign the FACIAL RECOGNITION only without having to choose it?

  Thank you

  SAL :)

  Hello Sal

  I played around with this stuff and here is my opinion on this subject.

  (1) as far as I know there is nothing strange. I noticed the same thing on notebooks too. For example, if you want to listen to music, you can simply press PLAYER button (3rd from left) and begins at will for laptop and open windows media player. If you want to go on the internet you can simply press INTERNET ((deuxieme button on the left). Laptop will be put into construction and Internet Explore will be open.
  So there is nothing strange, and even get on my Satellite P200 and brand-new Satellite A300.
  To be honest I don't know if this can be disabled. I'll ask a friend of mine. It is monster of Toshiba and maybe he knows more about it. But this behavior is certainly not strange.

  If you want to use only the power button and then press power button to start. Do not touch the other.

  (2) Please check s operating manuals and look for info on this button. AFAIK it is clearly written Mute or LED on / off depending on the model you purchased, press this button to mute the sound or turn on or off the illumination of the logo of the brand, touchpad and buttons.
  So please do not mix anything. This button has no two options. On your model, you can disable illumination only. It is the same on my laptop. So there is nothing wrong with your laptop.

  (3) you also misunderstood this feature. If face recognition is activated the two options will be displayed. If you do not want to enter a password you can use the option of face recognition. But what you will do if for some reason your face may not be identified correctly. How you want to connect?

  So, please don't be irritated by these things, everything is OK.

• Error message "Windows Media Center has stopped working" what Xbox Live is connected.

  Original title: TRY XBOX LIVE WITH WINDOWS MEDIA CENTER UI

  I have some setting wrong my XBOX Live interface with my computer. I get the message "windows media center has stopped working", immediately after the seizure of the 8-digit code provided by X - box in Windows Media Center. I dropped my firewall, I also allow all programs and open all ports to come through my firewall. What else can I try to remedy? Thanks, Cliff.

  Hey, Cliff,

  1. what operating system is installed on your computer?

  2. Windows Media Center works great if you do not connect Xbox Live?

  Follow the step in the article below and check if it helps.

  While trying to use your Xbox 360 as a Media Center Extender console, you receive the error message: "Media Center has stopped working".

  http://support.Microsoft.com/kb/932343/en-US (Applicable to Windows Vista)

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Windows Media Center does not launch. Error "Windows Media Center has stopped working".

  Original title: media library does not load. When I click the icon, it begins to open and the message appears Media Center has stopped working.

  I'm under win 7 on an ASUS. It is updated and I have no problems with anything else.

  Have you tried to test with another Windows user, in which case there is a problem of user profile?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  By using the system restore will get it going again if you go back to a point when things worked?

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
  http://support.Microsoft.com/kb/936212/#appliesTo

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

• AC100 - the process android.process.acore has stopped unexpectedly

  Our AC100 suffers from frequent and annoying messages: the process android.process.acore has stopped unexpectedly (well it is said in Dutch, so I hope that the translation is good). After googeling I found many people with the same problems (but for other devices as a computer of Toshiba), and it seems that the only solution is to reset the original settings (after having a back-up).

  But since everything downloaded widgets and applications will be gone then, I'm looking for another option. Does anyone have any experience with this message? How you solve the problem?

  And who knows how starts this problems?

  Hello

  I also recommend the return parameter of the Android to the factory settings. The widget could be saved on external source before setting the notebook to factory settings.

• I am trying to install Windows XP and during the process, a message appears with the title "RUNDLL__Error in iesetup.dll Missing entry: IEAccessSysInst. The process then stops and I cannot make progress.

  I am trying to install Windows XP and during the process, a message appears with the title 'RUNDLL '.
  "Error in iesetup.dll Missing entry: IEAccessSysInst.  The process then stops and I cannot make progress.

  Do not install an operating system is usually caused by (in order of probability):

  1. you are trying to install with other devices connected to the computer. Unplug them before trying to make an installation.

  2. "" "" defective installation media. "" Check the CD/DVD installation for scratches, tasks. Try another machine.

  3. bad optical drive. Test with another CD/DVD bootable or Exchange for a well-known work.

  4. faulty RAM. Test with Memtest86 + www.memtest.org . You will download the .iso image file to create a bootable cd. Burn the file with the third party burning software *-as an image, not in the form of data. Then start with the media that you did (you may need to change the boot priority in your BIOS so that the optical drive is the first boot device). The test runs immediately. The test run for an hour or two--at least that errors are seen immediately. If you get any errors, replace the RAM.

  * It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .

  5. bad hard drive. Test with a diagnostic utility downloaded from site of the disc mftr... You create a bootable CD with the files you download. Burn the file with the third party burning software *-as an image, not in the form of data. Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it.

  * It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .

  6. other hardware components are faulty. MS - MVP - Elephant Boy computers - don't panic!

• When I try to shut down my computer with Firefox running it hangs and stops the shutdown process.

  When I try to shut down my computer with Firefox running, it does not close properly during the closing. Instead, it crashes (as described in this article) and will continue to do so until I have stop the shutdown process and close it manually, where it will still not respond. There is the substantive issue. Here is the list of the relevant data to identify more precisely:

  On the list of programs is still active during the closure, the window of Firefox starts only appearing once as it should be, but a few seconds after starting to hang, it begins to appear a second time on the bottom of the list, with the specific name of the page is a duplicate of whatever it is on the original.

  This problem does not occur in safe mode, but it is not caused by one of my addons either, as I figured out after disabling all my addons with tools > Modules rather than the safe mode and still the problem.

  He is listed as that passes several times a week, but that is simply because that's how many times I forgot to close Firefox before pressing 'closed' and leaves the room without bothering to check it works. It happens whenever I try to turn off the computer with Firefox is running well.

  See this article--> occurs not in Safe Mode

  Check and say whether his work after turning off hardware acceleration.

• Android.Process Stop loop

  Hello world

  My milestone (A583) worked fine all day and then suddenly it keeps saying android.process broke down (this is going on in a loop) now I know that doing a factory reset will solve the problem but I know quite exactly what has gone wrong with it (because it's not like I've updated or update of an application that should cause this!)

  I bought the phone in December last year!

  Thank you!!

  "The only app like the one I have is Advanced Task Killer".
  

  Get rid of it! Uninstall it and leave Android OS to manage its own process. Task killers invariably cause more problems than they solve, and the best of cases, it's that he's sitting there without harming anyone. Worst case are it down your battery faster and causes instability.

• When I install xp sp3, the process is stopped and do nothing more

  Dear Guys,

  When I update windows xp service Pack 3, the process is stopped.

  the detail information show "own performing" then nothing, please help me.

  Thank you

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  http://taurarian.MVPs.org/WU_XP/windowsxp_service_pack_3.html

  TaurArian [MVP] 2005-2010 - Update Services

• STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt and recovery XP says error during the extraction process. Details of error: path not found___

  My friend turned on their laptop packard Bell recently and had the following problem. Windows XP screen loads but is then followed by a blue screen that says STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt. The header checksum does not match the checksum calculated.

  I can't the laptop to go further. I have accessed the Microsoft recovery Panel and try a non-destructive recovery as there are some precious photos that need backup. However, when you select 'no profile' to begin the recovery, I get the message:

  Error during the extraction process. Details of error: path not found

  I'm a bit of a novice when it comes to this sort of thing, but if someone can provide step by step help giving rise to lose photos, I'd be willing to give it a try. I also have XP Home Edition disk that came with the laptop but has never been opened. Any help would be appreciated. Thank you

  You hear your message said something about rpcrt4.dll?  It is important to relay the exact message you see.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  You use some CD to access this Panel of Microsoft recovery where this "no profile" option is?  I don't know what all this means if it isn't some CD shipped with your system, in which case, I would use it for a coaster instead of something to fix your system.

  If the c:\windows\system32\rpcrt4.dll file is missing or afflicted, you do not start in the last good known Configuration.

  You also will not start in any kind of Mode safe no more.

  Even if you could boot mode safe, you would find that sfc/scannow does not work in Mode without failure in all cases (never).  If you try it, you'll see a message like this:

  Windows file protection could not initiate a scan of protected system files.

  The specific error code is 0x000006ba [the RPC server is unavailable.].

  Failed to start the RPC mode server safe either.

  I can't recreate your error exactly, but it is easy to replace the rpcrt4.dll file.  Looks like you have a working CD drive, so put yourself a Hiren boot CD and when you started on this, you can copy your precious files to a USB device for safety.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  You need to rename or replace the rpcrt4.dll file which is in c:\windows\system32 and replace it with one you will find the backup copies.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  When you get the Hiren's CD's, you can use to replace the missing or suspicious file.  If you need help with that, first get the Hiren's boot CD made and start over, then we can continue.

  Do you have a Hiren BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

  There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision)

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• I get the message "process host windows (Rundll32) has stopped working" & "Windows Explorer has stopped working".

  When I go to one of the three users on a Vista Home system, I get the message "process host windows (Rundll32) has stopped working" & "Windows Explorer has stopped working".

  I ran SFC and chkdsk for this user, (took 2 hours) and it is not fixed. Help, please?

  I ended seting up a new user for my wife, the user who is messed up. and I overcame everyting execpt his address book/contacts. She wants me to fix the first. Help, please.

  SpamLessSN

  Hello

   
   
  Are what contacts/address address you referring to?
  
  Perform the following steps in order to correct the damaged user account
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
   
   
  Hope this information helps.
   

• I can not download the Flash Player. GetPlus + R stops working during the process

  I can not download the Flash Player.  GetPlus + R stops working during the process

  Hey Kevin,

  A. what browser do you use to download flash player?

  Have b. you tried with another browser?

  Have c. you downloaded this earlier?

  Please, try the following steps.

  Step 1: uninstall previous versions of Flash Player

  Before you install Flash Player for any Windows browser, uninstall all previous versions, and then restart your computer. Try to download flash player, if it does not work then uninstall Download Manager and check.

  Step 2: Verify Internet Explorer security and ActiveX settings

  Make sure that the Internet Explorer security is set at a level that allows viewing ActiveX controls. The medium: default level allows you to view the Flash content. For any custom level, follow the instructions below. (Contact your system administrator for more information.)

  To change your security level:

  1. open Internet Explorer.
  2. choose Tools > Internet Options.
  3. Select the Security tab.
  4. Select the custom level.
  5. Locate the section "ActiveX controls and plug-ins.
  6. set "Download signed ActiveX controls" at the command prompt.
  7. the value "Run ActiveX controls and Plug-ins" Prompt.

  Step 3:

  Download and install the flash player.
  http://get.Adobe.com/flashplayer/

  Reference:
  http://kb2.Adobe.com/CPS/191/tn_19166.html

  You can also post your questions in the Adobe forums.
  http://forums.Adobe.com/index.jspa

  I hope this helps.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]