Unidentified PC VCR signal.

I tried to copy an old video tape of the video recorder to my pc via a video capture card? I can hear the audio from the video, but not Visual, it says that my pc Gets a signal from the VCR... Help

I tried to copy an old video tape of the video recorder to my pc via a video capture card? I can hear the audio from the video, but not Visual, it says that my pc Gets a signal from the VCR... Help

=====================================
Perhaps the following links would offer a few ideas:

Windows Vista-
Throw those VHS tapes
http://Windows.Microsoft.com/en-us/Windows-Vista/toss-out-those-VHS-tapes-save-your-home-videos-to-DVD

Windows Vista-
Import analog video to your
computer using a DV camera
http://Windows.Microsoft.com/en-us/Windows-Vista/import-analog-video-to-your-computer-by-using-a-DV-camera

Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

Tags: Windows

Similar Questions

  • TV ATSC-NTSC with PVR tuner: how to record from VCR to my hard drive?

    I got a HP Pavilion desktop for 7 years m9300t still had never tried to use this card. Now I connected my audio R & L and S-video to my VCR to the card. I went through the installation of Media Center who asks a lot of questions about my type cable TV or satellite etc that I have no use for. I just want to transfer VHS video to my hard drive. After attempting to set up MCenter I CAN SEE my video playing on a screen of 1 "on the MCenter so I know what to get my VCR signal. I don't see any option to save the incoming video.

    How can I record my VHS video. I even tried to use my capture video SONY Vegas Movie Studio 10 software however, I see no option to get this card tuner NTSC VHS video.

    Thank you

    Hello @DangerousDave,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I read your post on how your desktop computer is not able to record VHS videos from the S-video plug, and I'd be happy to help you!

    According to the drivers available for your desktop computer, the only supported software is for Windows Vista. If you want to use with your computer recording features, you will need to re - install Windows Vista.

    Best regards

  • How can I view and connect my PS2 (play station) on Qosmio LCD?

    Hello

    I bought a Qosmio F25 and I tried to connect my PS2 to view it on the LCD screen. I connected the PS2 for the Composite video cable and I tried all channels on television but did not display channel?

    I did the right thing, or miss me something?

    (P.S. I tried to treat the PS as a box and tried to use the media center to configure and analyze for the channel but apparently sandbox model must be inserted and that's where I stopped)

    Appreciate your quick support

    Thank you!

    You have installed on your machine Qosmioplayer?
    Have you tried to scan all channels on Qosmioplayer?

    The TV or VCR signal is the same as on PS2. Admittedly somehow.

  • Satellite P205D - line-in port accepts signal VCR

    Help with video import P205D, will accept signal VCR online? Trying to import video to burn to dvd.
    Didn't know I was such a novice.

    Unfortunately, this model of laptop is not known to me but in the users manuals, you can read about all the ports available on this model of laptop. To send the video signal, you need VIDEO-IN port, and I believe that this port is not available on your model of laptop.

    I assume that you write on the microphone port. Where this port you are writing about?

  • In more of microwave ovens and cordless phones... can TV, VCRs interfere with WIRELESS signals.

    WIFI & PHONES WIRELESS, ETC.

    In more of microwave ovens and cordless phones... can TV, VCRs interfere with WIRELESS signals.  I had to buy a cordless phone and it was always in the sealed box.  I was then with a laptop to the library branch when the librarian approached me and said that "even if unconnected cordless phones and microwave ovens, as well as TVS, VCRs and vacuums... can cause interference with the optimal speed of WIFI and efficiency... »

    Can someone explain if it is absolutely correct.  Of course, I politely responded that given that the laptop was still in its original packaging and seal (I had just bought and not even opened) and unplugged, it could not interfere with anything.
    Please specify.
    Thank you.
    Joe

    A non powered device (not plugged in, no batteries, etc.) cannot intervene in anything at all.  No power, no transmission, no interference. However, any electronic device can interfere to some extent with any other wireless signal, if it is running.

  • VCR/camera watch & record on Qosmio G20

    Hung my video camcorder via the video tried in. read the instructions on how to view and save to VCR/camcorder info. Windows Media Center is used.

    Is there a configuration I must follow, or is this not a way to do this?

    Hi Greg

    I did some experiments with camcorder because I have a. If you want to send the movie to disc HARD your camcorder needs to be recognized as a new external device and video signal source. Fire wire ports and not S - VHS will be used generally for it. If you use the external S-VHS peripheral port will not be recognized and there is no way to send the video signal to any software you are using for video recording.

    The best way to check is to use Windows movie maker. I use Pinnacle software home for video recording.

  • Qosmio F10 - how to connect VCR to the Qosmio

    I'm trying to connect my analog VCR / my laptop to save some old tapes.

    Follow the instructions exactly as detailed in the user guide, but I can't get a picture. Used both Svideo composite without joy!

    Someone had the same problem and anyone know a fix?

    Thank you in advance.

    CT

    Hi Anthony,.

    I spent a futile a few hours by train to do it with my Satellite A30 until I have realized that the adapter SCART I was using was a single input device, so I wasn't getting any signal from the VCR to my laptop. I changed the adapter SCART to a version switchable and made sure that it passed to the "output" mode and it worked very well.

    I never managed to get a picture of S-video in color, black and white only. I gave up in the end and returned to composite connections that worked perfectly.

    HTH

  • Qosmio G30-141: VCR S-Video - no sound is recorded

    I want to connect a VCR to my laptop to copy videos win dvd creator. Creator only shows the tv tuner in the list of devices, it does not show the VCR machine (which is connecting via S Video cable)

    I get an image of the creator if I click on tv tuner - but no sound is recorded. I connect the red and white leads to the connection of the headphones with an adapter. Any help appreciated thanks

    Hello

    I guess that it's happening because the s-video cable offers a single video without audio.
    To also get a signal video and audio together, use a cable audio RCA (red/white connectors). This cable can be connected to the headphone jack.

    Also check this announcement:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=14357&MessageID=52356

  • Import of VCR via camcorder: so close!

    Hello knowledgeable helpful people!

    I have many VHS tapes personal I'll scan.  I think I have everything I need, so I don't want to buy the Elgato stuff and still less a dedicated combo VCR/DVD-R.  I just need help for iMovie to capture the incoming signal.

    -VCR to camcorder Canon Optura 60 via red/white/yellow RCA A / V capable (according to the instructions of Canon).

    Canon has specially designed the camcorder for passthrough A/D converter.

    Camcorder/a. passthrough mode

    -Camcorder to rMBP via a cable Firewire (native on camcorder end, FW400 Apple adapter of lightning on the end of the computer)

    Everything works fine right up until I can't capture.  I launched iMovie (current version), and just correct camcorder news show top-left as a source! Excellent.  I started a new project, click on the import media button arrow down and Push Play in the VCR.  I saw the perfect video hearing audio perfect both the camcorder and the computer.  I clicked on the import button at the bottom right and waited a minute for a short test run.  Then, I clicked on the button stop the import or whatever it was called.  At that time, I didn't see any new items captured.  Tried several times more; nothing.

    The only other thing, I will mention is that 'Not controllable camcorder' warning came at the top left of the window to capture.  I don't need to control the camcorder, however, so no big deal.  I clearly has a good, digital / signal V coming in the Macbook, but I can't figure out how to get iMovie to capture him.

    Any help?  Should I look at a different application?  I hesitate to spend the money on something else, like I have everything that I need.

    Much obliged, community.

    iMovie 10 requires Timecode for the import. Your camcorder generates timecode of band but no passthrough.

    Earlier versions of iMovie require no timecode for the import.

    Option 1.

    Save your VHS tapes on a DV tape on your cam' and then transfer the cam' in iMovie.

    Option 2.

    Quick Time Player allows to save and then import the data into iMovie.  QuickTime Player is on your Mac.

    How to use QuickTime Player - Apple Support

    In the options, set the Maximum recording quality.

    As you have several VHS tapes, then option 2 is probably the simplest.

  • WinDVD Creator2 cannot detect input of the TV or VCR

    I have a portable Satellite Pro M40 and I am trying to enter the data for my TV/VCR so that I can record to DVD. I have already used the system to import data through a digital video camera without problems. But now, I am trying to convert the family VCR DVD and when I try the Capture page shows a TV but when I click nothing happens.

    I am seized video through an S-Video cable.
    Ideas to help a novice!

    All I know S-video port on your computer laptop is the video output port and you can use it to send the video signal to an external device like TV. This port cannot be used as a Video-IN port.

    Can you please tell me how you connect your digital video camera? I plugged my digital video camera using port firewire with no problems.

    Please also check this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=5456 topic

  • Analog VCR to pinnacle using video in

    I don't get a signal on my VCR. I use pinnacle but struggle to connect my VCR to my laptop. Can someone help please! I use a laptop G30-163.

    Can you please be more specific on your analog VCR? Which one you have?

  • I need help with the wireless system. One of my computers doesn't seem to get signal

    Hello, I installed Belkin F5D8235-4 router and im get the signal on one of my computers. On the other computer, it seems that im getting the signal, but it says unidentified network. When I try to open the internet it says is Interenet Explorer cannot display Web page. Do you think this could have to do with the card in my computer is not not compatible. I have an Atheros AR5007 802. 11 b / g WiFi adapt. IM thinking that if I buy a D-Link wireless G USB adapter, USB wireless adapter Compact of Linksys or a Belkin 54 G Wireless USB Adapter my computer may be able to get the signal. What can I do? Help please

    Hello

    Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
    Update your WiFi drivers on computers. How you are positioned in the router? Are there
    obstacles in the path? With the help of WPA/WPA2 security? You put on the G and N or N
    only? A to G for this adapter connect the send.

    Your Atheros should be consistent - could be drivers.

    Actually try updating your driver and disabling the network logon. (To do this, use a wired connection or)
    Download drivers on another machine and transfer on removable media).

    Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
    version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
    Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    Download - SAVE - go where you put it - right click – RUN AS ADMIN.

    You can download several at once however restart after the installation of each of them.

    After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
    manufacturer of system become your backup policies).

    Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
    updated drivers.

    I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
    are almost always old, and you can search drivers manually as needed.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ------------------------------------------------------

    Make sure you know the details of connection to your router wireless and wired - SSID and password.

    You lose connection when you do and have to redo your logon.

    Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
    lower left click on merge or delete network locations - REMOVE all instances of your network (and the
    others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

    -----------------------------------------------------

    Check this box:

    Strange problem with Internet under Vista
    http://www.catonett.com/blog/archives/194

    Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
    http://support.Microsoft.com/kb/928233/en-us

    ----------------------------------------------------

    And:

    Network connection problems
    http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Questions of signals (s7 edge LTE - iPhone 7 Plus 4 G/E)

    Hey guys,.

    I know there are a lot of posts on this topic but I can't really find the one that corresponds to this...

    So I moved from s7 Edge for iPhone 7 more.  Since the switch, I have signal problems. Where, normally, I LTE 3 bars on my edge of s7, I now get 4g and E even on my iPhone 7 more. What is going on!!!  BTW, I'm on T-Mobile.

    Thank you

    Hey Greggaa,

    Thank you for being a part of the communities of Apple Support.

    If you get a poor cellular signal where you used to get full LTE signal, then it might be an update available for your iPhone carrier.  Please follow the steps in the article to check this update:

    Update the settings of your company on your iPhone or iPad

    Take care.

  • iOS 10 no signal problem

    I have an iPhone 5s (model 1533) and after the update to iOS 10 I can't get a signal, I tried a full restore and update and also reset network as well as the obvious reboot. First, he would get a signal a little while but if I tried to make a call, it would go directly to no signal, it also seems to have the power of the weak wifi signal too, related? Must say that I had a lot of problems with my apple stuff recently, at the end of my home! All ideas welcome please?

    I had the same problem on Verizon.  I fixed mine by going to settings, cell and disable roaming data and then on again.  Its happened twice so far, as well as a few other bugs.  iOS 10 is probably the worst launch of iOS.

  • How unidentify faces in the photos 2.0

    Hello

    In Photos 2.0, when you go to: people > Add: how to get rid of the faces of all the people I do not know and do not want to identify? I have grouped all the faces of my friends and my family. But everything is there on the left are still unidentified faces. Some of them are not even people that the app was wrong and some places are all gray when it is supposed to be a face!

    I can only add faces and does not remove the faces of people I don't know. So, when I add new photos of my family, when I go to the people > Add > I need to scroll up and down until I finally find the faces of those I know.

    Can someone help me find a solution? Thank you

    Here's what I have: gray square, faces I do not know and pictures of people I don't want to add.

    How to get rid of them? Thank you

    You can make all the favourites wanted faces and check hen show only Favorites

    Currently there is a bug, but after it is fixed you can open the pictures and click the x to remove the face (this now leaves so expect a face empty in your suggestions)

    You can ignore them

    LN

Maybe you are looking for

  • Upgrade of RAM 2 GB of Crucial on Qosmio G20

    Hello. I bought an upgrade of RAM (2 x 1 GB SODIMM) 2 GB for my Crucial G20-108, listed here http://www.crucial.com/uk/store/mpar...9C324BA5CA7304 but chips won't work in my machine. The first set, I bought and installed, cannot start Windows and Mem

  • Cluster VI output?

    So it's probably a very easy question to answer, but I can't seem to find this information in all the help files. I am creating a VI with inputs and outputs so that I can interface with Signal Express VI. Where can I find symbols to insert in my VI,

  • OfficeJet Pro 8610: No desktop Windows 7 printing and Officejet Pro 8610

    I bought and installed a new 8610 Officejet Pro about a month ago.  My desktop computer is a unit of HP Windows 7.  The printer is wireless. Until a few days ago, everything worked fine, but now I can't print anything from my desktop computer.  Print

  • Is XP Total Security virus?

    This seems to be a 'fake' piece of software. He joined himself in the MSFT security software.  He is running a routine continuously saying "Virus Infection". It will launch a scanner that lists the malicious software and where it is located.  the ONL

  • HP ENVY x 2 11-g030ea. No sound on my computer

    There is no sound on my computer. I try to increase the volume on the taskbar, but it goes right down immediately. I can not increase the volume that's why I ' have no sound... I think so?. It is very annoying because I just got this new laptop. Plea