Uninstall problem failed and cancelled updates

Similar Questions

• wireless lan driver installation update always fail and the update corrupted my wireless driver I use Samsung series 5

  Updates were recently fired the SW update. I have installed all the other updates the BIOS etc successfully, with the exception of the wireless Lan driver. Instead of doing an update, it has disabled my wireless totally when he said that the installation has failed.

  During my first attempt, I downloaded the driver 100%. Then a pop up message appeared saying that "the installation may take several minutes", and then another Intel logo appears and disappears, but said later that he could not install. After that, I get disconnected from my internet connection. No sign of wireless activity were found. I tried to watch the wireless icon and it was gone. I tried to solve the problem and it says that the only device for my wireless connection is Bluetooth.

  I thought it was just the problem of internet connectivity, so I tried to download the next day, but this time while being connected to a local network. The same thing happened to downloaded 100% and does not once again during installation. I just want you to know that I closed all applications and my laptop plugged in during installation if it helps your troubleshooting. I asked SAMSUNG support and they told me that the problem is with Microsoft, so I should ask them.

  I tried to update for like 5 or more times, but it's the same thing. I use my laptop for work and it's like I can't live without my wireless LAN are not always available. Download of the update becomes tedious because I have to wait like half an hour to finish the download only to find out that the installation will fail. I searched his driver I can install it manually but its nowhere to be found, looks like I'm stuck with SW update

  Hi Saloni,

  Thanks for posting your query on the Microsoft Community.

  Here in this scenario, I suggest you try to re - install the latest driver for network/wireless connection on your computer and check if it helps.

  Step 1:

  Download the driver for the network adapter / wireless computer/hardware. Visit the Web site below.

  http://www.Samsung.com/AE/support/model/NP500P4C-S08AE

  Step 2:

  Uninstall the driver for Wireless LAN / network card.

  Follow the steps to uninstall the network adapter driver:

  a. press Windows + X keys, and then click Device Manager.

  b. search for network card.

  c. right-click the WLAN network adapter , and then click Uninstall.

  d. follow the command prompt, and then restart the computer.

  Step 3:

  Install the network card driver / wireless that you downloaded from the website of the manufacturer of the computer/hardware.

  Please reply with the status of the issue so that we can better help you.

• I had windows updates only 3 update 11 failed and not update, now I can't open my program files

  After starting to install windows updates failed only 3 including 11 installed has not tried again they now cannot access some programs include research on the windows desktop, Explorer windows, help and support, system information, disk cleanup, defrag the files, microft office, others I right click and click Properties find target then I get a message could not open the windows file install is not properly installed ,

  Your last two responses bring back us to 2 two things you posted yesterday (I had hoped we could avoid).

  In reverse...

  [#1] ... I received an error message when I booted my computer that says "cannot find componate RPS.exe. "AntiFr.dll was not trying to install again.

  Several years ago, before Verizon (or whatever your telephone company was called at the time) gave the suite McAfee customers, she gave another sequel on Proctection of Radialpoint Suite (AKA freedom Internet Security).

  The code snippet above tells me that the Radialpoint suite has been installed on your computer at somepoint in a past distant: files RPS. EXE and ANTIFR. DLL are 'leftovers' from Radialpoint Protection Suite (where letters RPS in the first file name).

  Speaking of the hard personal experience, I can tell you more about Radialpoint is about impossible to remove completely without manual editing of the registry - something you DO NOT want to do!

  And despite what the volunteer moderator McAfee Forums and communities (own KB of Radialpoint article) has to say, you do NOT want to download Microsoft's Windows Installer Cleanup utility now interrupted the quoted source not Microsoft !

  [#2] ... I installed Speedy [PC] Pro last week... every day since then, around 15:00 I get a message that says "cannot find c: Program file commune File\SpeedyPC Software\UUS3\UUS3.dll ' I click on close and she goes until the next day.

  Unfortunately, installation & with the Speedy PC Pro 'scareware' is no worse, Dennis. [It is called "scareware" because you have to buy this disreputable application ($34.95 USD, I heard last) until it 'fixed' anything.] [Of course, it won't fix a 'thing'!]  See this recent discussion, some-online http://answers.microsoft.com/en-us/windows/forum/windows_vista-security/who-are-speedy-pc-pro-and-are-they-safe-to-use/62629332-a670-4166-b418-e2a5a876daa1

  TIP: If you ever think that your registry database must be cleaned, repaired, boosted, point, healed, twisted, fixed, magnified, "swept" or optimized (it isn't), read http://aumha.NET/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

  If you had not used the Speedy PC Pro crapware, there is a very slim chance that you would be able to install the suite McAfee/Verizon again - at least according to McAfee Tier III Support Tech post on this page. But you don't have so there is nothing we can do about it now. [No, System Restore may not "come to the rescue" here.]

  => Let me level with you here: this set of the problem is due to have not entirely - remove the McAfee free version to test which is preinstalled on your computer, years BEFORE the installation of any antivirus application (for example, the suite of Radialpoint) AND BEFORE installation of Windows updates.

  Now the very bad new: the only way to return your computer to a functional & secure State is backup so your personal data (for example, the contents of the My Documents folder;) Favorites of IE; E-mail Client data) then format the hard drive and do a clean install of Windows XP (or buy a computer brand new Windows 7).

  Follow the instructions (to-the-letter & in order!) in this post of mine in another forum: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional help with the new installation, start your own, new topic in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  If these procedures are outside your technique "comfort zone" - and there is no shame in admitting this isn't your cup of tea - take the computer to a local, reputable and a stand-alone computer (that is, not "BigBoxStoreUSA" or Geek Squad), repair shop & let them do the work.

  Note: The computer must NOT be connected to the internet or local networks (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  I sincerely wish I had better news for you.  Good luck!

  =================================================================
  WARNING: Displayed AS IS without any warranty. MS MVPS represent or work for Microsoft

• Cannot uninstall the program and Windows Update.

  Original title: RUNNING WINDOWS VISTA 32. WINDOWS INSTALL STOP WORKING. CAN NOT INSTALL OR UNINSTALL.

  HOW to REINSTALL WINDOWS INSTALL OR GET to WORK IF I can NOT INSTALL anything, INCLUDING WINDOWS UPDATES.

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  ·         You get the error message?

  I suggest you follow the steps mentioned below:

  Method 1:

  Follow the steps in the link and check if the problem persists:

  http://support.Microsoft.com/kb/2438651

  Method 2:

  Check if the installation of windows services are running. Follow these steps:

  a. Click Start, type Services.msc and press ENTER.

  b. double-click Windows Installer.

  c. set the start type for Windows Installer to manual.

  d. Click Start to start the service.

  e. click OK.

  Method 3:

  Re-register the windows setup program. Follow these steps:

  a. click Start, click run and then type cmd in the dialog box, and then click command prompt.

  b. at the command prompt, type the following and press ENTER after each line:

  c. to unregister the type install windows MSIExec /Unregister.

  d. to re-register MSIExec/regserverwindows installer type.

  e. try to uninstall the update from Windows.

• Passport driver SmartWare has failed and the update of their website did not help

  Was using a passport, smartware until a few days ago. Plugged in today and it has not been recognized. Received an error message for the driver so I tried the fix for the driver. It does not work so I went to the website of SD and downloaded Setup driver and reinstalled, but that doesn't work any more. Why should it suddenly stop working?

  Hello

  Thanks for choosing Microsoft Community Forums.

  According to the description, it seems you are having problems with the connection of the Smartware passport. I will certainly help you fix this problem.

  (1) did you do changes on the computer before this problem?

  Method 1: I suggest you follow the steps in the link to run the troubleshooter and check if that helps.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: I also suggest you to download and install the updated firmware from the link and check if the problem persists.

  http://support.wdc.com/product/download.asp?wdc_lang=en&FID=wdsfMyPassport_Essential

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• I use Windows Vista Home Premium 32 - bit SP2. Is there a way to delete records of only updates of failed or cancelled in the history of Windows Update?

  I use Windows Vista Home Premium 32 - bit SP2.

  Is there a way to delete the records of 'detail' of only updates of failure or cancelled in the history of Windows Update?

  I just installed hotfix for Windows (KB947821).

  It looks like a lot of my earlier 'failed' and 'Cancelled' updates are automatically updated and installed, and successfully, I might add.

  Some dates in some records do not seem much sense. I guess I'm looking for a way to select the records, I want to get rid of.

  Help?

  Hi Jeffrey,.

  It's not really a taken way in charge to remove only the cancelled or failed updates. These are taken from windows logs and displayed in the history. Steps that Jose post is a way to remove all files in history and will remove all updates as well as a failed/cancelled updates successfully.

• I have install update Adobe Acrobat reader on my computer a few weeks ago. I was not able to print my documents, new or old. I use win 7. I tried to uninstall the program and re - install, and that has not worked. I went to the HP tapes

  I installed the update of Adobe Acrobat reader on my computer a few weeks ago. I couldn't print my documents, new or old. I tried to uninstall the program and re-install and that has not worked. I went to the HP website and from the down loaded the latest printer drivers, and that did not work. I went to tools for the production printing package that reads 'Add' tab. I clicked Add and got a (1-800-915-9430) number to call if I want to pay other services that offer Adobe. I called the number in the hope of getting my answers to the question and that has not worked. I've gotten has been a long wait (1 h) for a person to respond to the call and when they meet a poor service. I went to different forums looking for answers and found my question but not response. The messages I get are: "the document could not be printed" and "there is no page selected. Is there a solution to this problem? The version of window is Win7.

  Hi Abhishek,

  I followed your instructions and none of it worked. I had to uninstall Acrobat Reader and then update my version of the window. After that I downloaded Acrobat Reader again and it worked. Thanks again for your help.

• I can't connect to the internet via my host after uninstalled antivirus software and restart

  I can't connect to the internet via my host after uninstalled antivirus software and restart it.

  I use windows xp on my host computer and all computers in my client. After that I uninstalled the free trial NIS version and restart my host, I lost the internet connection. Tried to restore with the restoration of the system, but when I restarted it, it said the system restore could not be made. I changed it then with my laptop and I can connect to the internet as the host.

  Hello

  This can happen if the uninstall process fails and leaves behind a Symantec registry value. See the following Symantec article.

  Unable to connect to the Internet after uninstalling Norton AntiVirus.

  http://Service1.Symantec.com/support/NAV.nsf/8d071816eedd7cac88256c0e005a96e5/751c3298ab99cf7188256d34006702e2?OpenDocument

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows?

  322756 (http://support.microsoft.com/kb/322756/ )

• Update of Windows Vista Home Premium fails to install updates KB2533523 and KB2468871 which I think that the problem is solved, how should I try to reinstall these

  In windows update, again and again, updates KB2533523 and KB2468871 could not be updated.  I "think" I can have solved the problem, but how do I try to reinstall these, now that I think that the problem is resolved.

  Do you Google? -Online http://tinyurl.com/3onrw2c

• Vista - Windows Update fails and defender gives the error code: 0 x 80080005

  Well, I downloaded Veoh Web Player and DivX player (with a driver package) almost the exact same time, so I don't know who caused the problem. (Guessing Veoh done.) I restored system which usually solves it for me and then uninstalled both programs and even if my computer is not nearly as slow as it was when they were both installed, it's always problems. Windows open frequently stops responding. As I said, the system restore only makes it better for a short time while longer I go without eating, the freezier my computer becomes. I also noticed that for about 2-3 days (after which my computer almost completely freezes and I have to startup repair) most minor cosmetic changes.

  I use Firefox, so the first change I noticed was that left side of the address bar in a small half circle in a regular square. Tiny. Then the scroll bars on all the programs I've used lost their Aero look and returned to normal, old style Windows. Eventually good menus click lose their new look, then all the start menu, and finally Windows Explorer stops working and all the windows, when not in use, become small tabs at the bottom of the screen. After that the computer hangs almost entirely.

  Each time I restart or system restore the first thing I see is a little box that says that a Windows host process has stopped working. Windows Update continually fails and Windows Defender gives the error code 0 x 80080005. What can I do? I looked for answers before coming here to help and what I read it looks like a downloaded driver can interfere with the host process, even if I uninstalled it (supposedly) all. Thank you.

  Applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. now to reset Windows Update by...

  How to reset the Windows Update components?
  [Access KB971058 via Internet Explorer only;] Run the difficulty in DEFAULT and AGGRESSIVE mode]
  http://support.Microsoft.com/kb/971058

  5. restart & test.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windws update fails and says code 643

  Hey microsoft,.

  Until recently one of my users on my 32-bit Windows Vista laptop had been corrupted for a long time and some files were working, others are not. So, I decided to make a new user profile. In the old, I had a windows update that I did, but two important updates for .NET framework could not be updated. In the new user, they could not be updated either. I tried at least 5 times and nothing worked. I did a restart and everything, but to no avail. In addition, an error code came to say "update failed to install updates, error 643'." There are options for solutions, but those who did not. Please help me and could you also tell me what makes the .NET infrastructure? Thank you.

  -Maryse

  Follow the steps in this article:

  http://support.Microsoft.com/kb/976982

  If the problem has not resolved, try to use the system restore and restore your system in time before this problem. If you have installed the new update for .net or visual studio then this problem occurred. Uninstall this update, and then try again. (for example if you have installed SP1 for visual studio try to uninstall and then reinstall).

• A popup thinkpoint guard sayingdatabase update failed, and that out-of-date virus databases are not effective

  original title: HELP; A popup thinkpoint keeps sayingdatabase update failed, and the obsolete virus databases are not effective thatI need a version complete a required heuristic module... . How or what do I do to solve this problem?

  I can't find a free trial version for this add-on.

  It's what we call a "Rogue Security Program"... in plain language, it's a complete and utter scam.
  Please read this to be able to access the desktop so that you can rid this Rogue software system-
  Remove ThinkPoint (uninstall Guide)

  Expert MowGreen Windows IT Pro - consumer safety

• "Error 1402.Could not open key" during the installation of Adobe and HP update. Updates failed and earlier of the software cannot be put back in place because permission to modify the key is denied.

  • Issue: Failed to update and previous software may not be returned to or re-installed. Problem programs include Adobe Reader and scan and editor for my HP C4180 all-in-1 photo printer.
  • (For example) error messages:
    Error 1402.Could not open key:
    UNKNOWN\Components\1FA18F797...
    Check that you have sufficient access to that key, or contact your support...
  • No recent changes, with the exception of updates failed and normal widows.
  • I thought bad updates from HP and Adobe has caused the problem, so I uninstalled and tried to re - install the software several times, hoping a release update would solve the problem.  Impossible software returned to or re-installed, so I bought try 'PDF Converter 6' to to access PDF files. This program could not be installed for the same reason.

  The Windows 7 FAQ has reported that Windows 7 could be reinstalled everything keeping the settings. The same can be done with Vista? If not, is there a safe way to delete these keys, so the software can be installed/re-installed without having to make a facility 'clean '?

  Thank you.

  Hi misterDormie,

  This problem may occur if the permissions to a specific key in the Windows registry has been denied because the registry is corrupted or due to registry permissions

  I suggest you try the following steps:

  Step 1: Check with a different user profile

  If you do not have a different user account, you will need to create a (see link below).  If everything works fine with a different user profile, you can infer that the user profile is damaged, click on the link to find out how to solve this problem.

  Create-a-user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  If the problem persists,

  Step 2: Run a scan online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

   

  You can follow the steps mentioned in the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• ADOBE CC - Customer Service fail to resolve my problem (curves) and compensate for them.

  Event history:

  23 February:

  I discovered that Adobe Photoshop 2015 CC had a problem with the program

  -J' I import my raw image

  -Apply the curve

  -Curve pen

  -Save as a PSD and JPG

  -Image on the PSD and JPG file appear with no good hard and curve lines.

  I report this problem to the Photoshop customer service, they said, it was a problem to update. I uninstall and reinstall... She still took place. Customer service suggested that I use Photoshop 2014.

  I paid over 100 dollars for old hardware? I didn't think it was just... anyway. I waited.

  March 4:

  I reinstalled 2015 and the black lines were always there.
  -J' have customer service message, they acknowledged the problem (bug) and assured me that the problem could be solved on the next update.
  -The update for adobe Photoshop was in November... (at this point I'm still paying)

  -They recognized this was not my fault and gave me a 30 day extension.

  
  30 days after I requested additional since an extension I was using a lower quality product. They do not allow this. Now, I'm upset.
  Not only am I paying full price, I pay for something less.

  They referred me to a (top team) B.S. that would respond to my inquiries about the problem...
  A came response where I was told that I was unable to get the extension... The end.

  What kind of service is that? Still, I have black lines on my jpg files and cannot produce impressions of Adobe Photoshop 2015! I will not be satisfied with something obsolete! What is the point of subscription if I don't get to use the latest software?

  I have attached a picture for example, nothing special. It's not supposed to be a hard line on my image, but each image that I recorded with changes product LINES TOUGH! * Note This is a PSD file, but jpg files save and print the same!
  

  If you have a solution... I'm all ears, because the Adobe creative team can't do anything for me and will not compensate for me either.
  If you are interested in the transcripts between service customer and I have... I have them.

  Just out of curiosity, you reset the Photoshop preferences? Worth a try.

  Manually; course may be cancelled:

  http://TV.Adobe.com/watch/the-complete-picture-with-Julieanne-Kost/how-to-reset-Photoshop-Le file-Preferences-cs6s.

  Fast; cannot be undone:

  Win: Press and hold the keys Ctrl + Alt + Shift immediately after the launch of Photoshop starting. A box will appear asking if you want to continue with the reset, select 'yes '. If you don't see this, you're not fast enough... Try again.

  Mac: Press Cmd + Opt + shift then launch Photoshop. A box will appear, asking you if you want to continue with the reset, select 'yes '.

  In addition, as Warunicorn says, check updates of system which may include new graphics drivers.

  If you continue to see the problem, you could post a bug in the feedback.photoshop.com report

• I migrated my Macbook pro to an Imac Photoshop works very well, but CC says that there is a problem. It tells me to download CC but when I try to install it fails and tells me that I need CC?

  I migrated my Macbook pro to an Imac Photoshop works very well, but CC says that there is a problem. It tells me to download CC but when I try to install it fails and tells me that I need CC?

  Migration/transfer of Adobe applications does not work.  You must install using installation files.  Uninstall, and then use the CS cleanup tool.  Then download/install the desktop application, connect and install applications subscription.

  http://www.Adobe.com/support/contact/cscleanertool.html

  Creative cloud to desktop
  https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html

  Sign out, sign in | Creative office cloud app
  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  Help of activation & deactivation
  https://helpx.Adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html#a ctivate-how-to's

  Install, update, or uninstall applications
  http://helpx.Adobe.com/creative-cloud/help/install-apps.html