Uninstall the Driver nor visa 3.0.1 to install 4.2

Similar Questions

• For the Driver NI-VISA Wizard error

  Hello

  I'm getting a "ERROR-1073807175: field of bLength is incorrect for USB_ENDPOINT_DESCRIPTOR type" this error shows immediately after I click Next on the first screen of the wizard of the Driver NI-VISA.  I see no errors after the wizard creates the USB driver.  In fact, I write for the endpoint device USB 4 using this driver for NI-VISA.  My problem is that I can't read of 3 endpoint.  I don't know if this error has something to do with my problem.

  Is there a way can I fix?

  The version of the Driver NI-VISA is: 5.4.0.49152

  Fixed a problem.  Disconnect the USB hub that is built on my Dell Monitor Help.

  Thank you

  Pablo

• How to start the wizard for the Driver NI-VISA development

  IM reading this manual:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/4478

  I have labview8.6 on this pc, and I installed the driver NI-VISA 4.6... the manual says:

  "" "" 1. to open the DDW, select Start ' programs ' National Instruments ' VISA ' VISA Driver Developer Wizard.

  but the thing is, the menu of VISA, there are a few documents... There is no VISA Driver Developer Wizard... but I installed the driver NI-VISA 4.6... any ideas?

  In fact this explains the problem. You install DURATION VISA. If you re-run the installation program, you will see the feature tree seems different from that displayed a stone.

  The component you need, driver development Assistant, is in full VISA distribution, which you can download from the link below. The runtime is usually designed for deployed application. The development tools are absent of the runtime and are in the full distribution.

  http://Joule.NI.com/nidu/CDs/view/p/ID/1370/lang/en

• The wizard of the driver NI-VISA creates drivers that are compatible with the 64-bit Windows XP/Vista version?

  The wizard of the NI-VISA driver creates drivers that are compatible with 64-bit Windows XP/Vista?

  InfiniteNothing-

  If you use a 64-bit compatible version of the NI-VISA driver, then the Assistant of the Driver NI-VISA is expected to create device drivers compatible 64-bit running in 32-bit mode.  You can find the various drivers of NI-VISA at http://joule.ni.com/nidu/cds/fn/p/sn/n23:1640/lang/en.

  Take care!

• LaserJet P1006 cannot uninstall the driver to reinstall

  Cannot get Windows to recognize the P1006 8.1.  It worked fine in Windows 8.

  So when I try to uninstall the driver, I see that the driver is not listed in "Programs and features", or the printer is in "Printers" in the Panel.

  How can I uninstall the driver to reinstall if it does not appear anywhere?

  Thank you

  Rich S.

  Hi RichS_

  It seems that the print driver usb support is not fully install correctly.

  We will have this resolved yet.

  See if the printer will print a material as self-test.

  While the printer is turned on, open and close the lid quickly five times.

  It should display a page with black lines on it.

  I would like to know if it printed?

  With the printer still connected to the computer, return to Device Manager and see what it shows listed for the printer. Example, another unknown device, under universal bus controllers does show the usb printing support?

  Let me know.

  Try to enter the computer, windows, program files or program files x 86, hp, laserjet p1006 to see if it is listed. If it is not open the folder and run the full uninstall from there after disconnecting the usb cable.

  Reinstall the driver downloaded again.

  Let me know all this, so I can help you better.

• HP Photosmart Premium C309a: uninstalled the driver, but can't re install even on HP C309a

  My device cannot scan and there is an error (could not insert the screenshot error). As recommended, I did uninstall the driver and appeared to be successful. But re - install is the problem here, first I downloaded the race online, saved, driver (PS_410_C309a_Net_enu_140_047) & files were extracted. From the beginning, it seemed ok, but he continue recyling process of installation from the beginning until the re - start the computer. After the re - start has finished he will repeat the same process and it will eventually re - start the computer again, and there is no end here, I guess.  It's very frustrating.  I tried stuffs as suggested in the forum, such as the execution of net user administrator / Active: Yes, but nothing helped. Also, I tried using journaling to change user, the unsuccessful outcome. Help, please

  Hi arguegar,

  Thank you for your answer!

  Please, try the following steps in this order:

  • Uninstall the software. Uninstalling the printer software.
  • Unplug the printer USB cable.
  • Clean boot the computer. How to configure Windows XP to start in a "clean boot" State.
  • Disable Security Center. Windows XP - disable Security Center
  • Create a new user account. To add a new user to the computer
  • Reinstall using the HP full feature software and drivers. HP Photosmart Premium Fax C309 all-in-One series full feature software and driver. (Wait for the software to tell you to plug in the USB printer cable).

  I hope it's useful!

  "Please click the Thumbs up icon below to thank me for having responded."

• I uninstalled the driver idt by mistake

  Hello
  I need help so bad
  accidentally, I uninstalled the driver idt!
  don't ask me how I just did :/
  then I read some responses on this forum and was able to reinstall the * bleep * thing but now its does not work
  I have no music or video sound now
  helmet even does not work
  Help me please

  Your computer comes with a "recovery Partition", where all drivers are stored.

  Type "Recovery Manager" in the search

  Go to the drivers and Application

  Find the audio driver from the list and install the driver

  Restart your laptop

  I would like to know how everything goes.

  Nice day.

  By clicking on the White Star congratulations on the left is a way of saying thanks!

• Problems after uninstalling the driver "hotspot shield".

  I just 'last known God' my computer, there was a problem of the internet. When I plug the LAN cable, it does not detect and if wireless, it will have limited connectivity. So I just uninstall the driver "hotspot shield". Later, it crashes on a blue screen every time I use the antivirus (trend micro titanium maximum) of full to scan my computer. When I start it, it comes up with this message:

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 1033

  More information about the problem:

  BCCode: 1000008e

  BCP1: C0000005

  BCP2: 90ACBA9C

  BCP3: A899BAC0

  BCP4: 00000000

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 256_1

  Files helping to describe the problem:

  C:\Windows\Minidump\120511-42525-01.dmp

  C:\Users\Kwong\AppData\Local\Temp\WER-1005769-0.SysData.XML

  Read our privacy statement online:

  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt
  Please help me solve please and thanks in advance!

  Hi kwongtungnan,

  -You are able to start the computer?

  I suggest you perform the steps in troubleshooting from the following link and check how it works.

  Using the troubleshooter from network in Windows 7

  See the troubleshooting steps for blue screen error at the following link.

  Resolve stop (blue screen) error in Windows 7

• I want to connect my Macbook Air (IOS 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear I

  I want to connect my Macbook Air (IOS X 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear as an option in the preferences/system sounds.

  Version 1.1.2.2 El Capitan driver support, then why don't upgrade you your MacBook Air to El Capitan?

• The driver NI-VISA Wizard and command of the SCPI

  Hello

  I had a go with an assistant driver NI-VISA. I wanted to create a driver for MH3114 DAQ. Assistant hollow went very well, and the driver has been installed.

  However when I did * IDN? under MAX, I received an error.

  This means that I have to create/put into practice all SCPI commands?

  How the wizard is designed to work?

  Hi MimiKL,

  As Dennis said, instruments are designed to work with the SCPI commands or not. If the user guide does not indicate the device meets SCPI and SCPI commands will not work.

  The wizard of the driver simply generates a number of screws that will send the standard commands of the SCPI compliant instrument of the SCPI. Depending on how you communicate with the instrument (bus), you may need to change these screws subtly to work with different instruments. But, as mentioned, if the device you are trying to contact is not in line with SCPI then this is never going to work. Later, when you use the Assistant driver, all the subVIs generated will be have comments in them tell you exactly what to replace and change to get the driver working for your instrument.

  If your device is not in line with SCPI and you have a dll that works then you should continue to use it.

  Best regards

  Chris

• FireWire Camera disappeared to MAX when you select the driver NOR-IMAQdx

  Hi, as the title suggests, I'm having a problem getting my camera firewire (a PixeLINK PL-A742) appears in MAX so I can use it in my application. First of all, a bit of history.

  It was all works fine on an old computer (Windows XP SP3, LabVIEW 8.6.1, NOR-IMAQdx 3.2).

  We just received two new computers. They have Windows 7 Professional 64 - bit installed on them, then we are stuck using that (I was going to install labview in XP Mode, but there is no support for firewire, which no longer works). After finally getting installed labview (to run the setup.exe from Distributions\LabVIEW-ENG\LabVIEW861\, rather than make the autorun) we cannot get this camera to work. It works very well with the PixeLINK pilot (and Capture OEM program that accompanies it).

  So here is what I tried, and what happens when I do.

  (1) install cost of LabVIEW (including IMAQdx 3.2) and PixeLINK drivers.

  (2) at this stage, the camera works very well in the PixeLINK application

  (3) start MAX. It detects the camera and shows under devices NOR-IMAQdx. When you click on the camera, it informs me that the selected device is not currently associated with legacy OR-IMAQ driver IEEE or the driver OR-IMAQdx. This is perfect, it is supposed to do.

  4) click camera > driver > choose NOR-IMAQdx IIDC camera digital

  (5) he then disappears from MAX (no record OR-peripheral IMAQdx more). If I goto windows Device Manager, it comes under National Instruments IMAQ Interfaces as NOR-IMAQdx IIDC camera, says the pilot did get properly, it just does not appear in MAX more...

  (6) at this point, there is nothing I can do to get it back to the MAX (except in Device Manager to switch the driver on the PixeLINK one, then he pops up and we return to step 3)

  So, any ideas? This could be a problem with firewire interface and not the camera? I use the FireWire on my computer. It presents itself as Texas Instruments 1394 OHCI compatible host controller in Device Manager.

  Here are a few screenshots to help illustrate my problems.

  It is the initial configuration using the PixeLINK driver.

  

  It's MAX with the PixeLINK driver

  

  As soon as I click on the NOR-IMAQdx IIDC camera, it disappears

  

  And here's what it looks like in Device Manager after you have selected the NOR-IMAQdx driver

  

  Anyone have any ideas? I'm open to anything. At this point, I'm completely at a loss to know what to do.

  Thanks in advance,

  Devin

  Mechanical engineering intern

  University of Victoria

  Well, you can just ignore this message now. I solved my problem. I installed Vision Acquisition software 2009 and it seems to have solved my problem.

• Problem of uninstalling the driver with 8500 all-in-printer

  Impossible to uninstall completely 8500 all in one printer on Windows 7 Driver. A removal tool is available to completely remove the drivers in Windows 7 for my printer?

  Hello..

  try this one...

  Uninstall any program printer Hp remaining on your system...

  1. click on the windows logo or button-on start the search box or run - type in %Temp%, press enter

  2 find the 7z on TEmp files folder.

  3. open & folder z and search for util util-open look for folder - open CCC ccc folder loofk to uninstall3.

  4 go to uninstall level 3 - restart the computer - go to the folder %Temp% trhen delete tye 1 7z - to the same process for the remaining 7z open folders util-ccc-uninstallL3-restart Pc and delete the folder you 7z

  5. Once Your ' e fact-go to add or remove programs or programs and features to uninstall the printer software Hp remaining... and then you restart pc again...

  Before you reinstall the printer, follow these steps:

  1. Click Start and then click run . The run dialog box opens.

• RT system timeout when updating the driver NOR-DAQmx 8.9.5 to 9.0.2

  I installed LabVIEW 2009 on my host (Window XP) which has now NOR-DAQmx 9.0.2 installed.  My remote RT chassis has NEITHER-DAQmx 8.9.5 installed.   I need to have versions of NOR-DAQmx match on my host computer and remote systems.  I tried to install the driver OR DAQmx 9.0.2 my host by using the LabVIEW Real-time Software Wizard.  The Installer tries to restart the remote chassis on the installation mode but expires and returns the error Code 56.  How can I get my versions to match?

  Problem caused by the wrong installation order.  Necessary to install 9.0 RT first on target.  NOR-DAQmx has been updated at the same time.

• How do I uninstall the driver then install an updated driver

  I have problems with my Epson Stylus CX7800 printer. Only printing in black ink. Downloaded an updated driver to update but don't know how to uninstall the old and install a new one. :-(

  Hello

  First try to check the properties of the printer if Print gray scale is selected... If so uncheck... Page test print to the printer to see if its printer problem or a software problem. Consult the printer manual to know how to print a test page for the printer (no pc).

  Print a page of test directly from the printer will help you to isolate the printer cartridge, a hardware problem. If printing is all ok check then print a test page for the pc. Check under the advanced print options.

  I hope this helps.

• Uninstall the driver Google's ADB installed via Windows Update.

  Hello. My problem is that I checked and installed new updates to windows when my Android Tablet has been connected to the computer. In the updates optional tab was an update of pilot, ADB of Google Inc., and I have also installed this driver. Now, when I plug the Tablet into it, doesen't show up as mass storage. I tried to uninstall the normal driver ADB that I would be an update, but is not on the DSL updates of windows. Could someone help me?

  Hi idalevan,

  Since he is the driver of Google, I suggest to check their support regarding disconnected.

  You can also take a look at the following for more information:

  https://sites.Google.com/site/wowebcam/installation/install-ADB-driver

  Thank you!