uninstalled windows update

Similar Questions

• Cannot access the program to uninstall, windows update will not update, microsoft will not be security update

  I seriously need help, I have tried all sorts of Fix it programs, security, ect. I scanned for days, nothing detected.

  I realized a problem when I tried to uninstall a software, I denied access. And Yes, I have full admin, I checked that first.

  Also I can't use Windows update, but can update directly from the download page of microsoft Security Essentials will not update or another.

  I'm using Windows Vista 32-bit.

  Whenever I have run windows update I get this 800700 1 error

  Lights on would be much appreicated I am too much pulling hair ATM, and the bald look doesn't work for me :)

  Moved from Vista to install, upgrade and activate Forum.

  Hello

  If you have analyzed the days; What scan you with as you say that you cannot refresh MSE, which seems to exclude from scanning using security programs.

  And what program have you tried to uninstall?

  This is an old thread on a similar issue of the update:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-Update-error-800700c1-Windows-Update/05f253df-f892-4291-8db6-61174461b568

  See you soon.

• Impossible to uninstall the update of windows KB2884256 in Windows 7 (32 bit) of the evidence

  In fact, I am facing problem to access my own network, which is a combination of LAN and WAN.  Here, we use two different groups of IP Office. Some days, I was able to access the entire network with ease. I have noticed that after updating some windows updates, access is completed.

  Now, I tried to uninstall updates. But a "KB2884256" knowledge does not have any uninstall option. Please suggest.

  Hey Ashok,

  Thank you for visiting Microsoft Community.

  According to the description of the problem, you cannot uninstall Windows update history update KB2884256. I suggest you see the below thread and see if it helps.

  KB2884256 does not have uninstall option

  If your main concern is network connectivity, I suggest you to try the steps below and see if it helps you to solve the problem. The problem may be caused, if there is a miss match the IP address configuration. Then I suggest you to release and renew the IP address. For this you can see the steps below.

  Method 1:

  Release and renew the IP address of your computer:

  1. Go to Start, click all programs and open the Accessories.

  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.

  3. In the command prompt, type the following command and press ENTER:
     enough ipconfig and press ENTER.

  4. Then type ipconfig / renew and press ENTER.

  5. Type Exit and press ENTER.

  Method 2

  TCP/IP defines how your computer communicates with other computers.

  To make it easier to manage TCP/IP settings, we recommend using automated DHCP Dynamic Host Configuration Protocol (). DHCP automatically assigns Internet Protocol (IP) addresses to the computers on your network, if your network supports. If you use DHCP, then you don't have to change your TCP/IP settings if you move your computer to another location, and does not require DHCP allows you to manually configure the TCP/IP settings, such as domain name system (DNS) and Windows Internet Name Service (WINS). To enable DHCP or change other TCP/IP settings, follow the steps mentioned in the link below:

  Change TCP/IP settings

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Windows Update has messed up my computer...?

  I was going to restart my computer and saw the update windows... so I decided to update my computer so... When windows has finished updating and reloading... He would work for the first minute or so it would freeze... Freeze not literally... but nothing will work and I can still move the mouse but the mouse icon would be stuck in this symbol of loading... (the little blue circle)

  At the beginning I thought I would just let it finish loading all that computers in train load... but 30 minutes later, its still stuck on loading... I did a hard reboot, and the same thing would happen... 30 seconds - 1 minute to load windows it would freeze just about anything under its weight...

  So I thought the windows update screwed up my computer... I loaded in safe mode and tried to do a system restore, only to discover that my computer system restore has been disabled! ??? ... so now I have no idea what to do... someone please help me I have a lot of work to do... Thanks in advance

  on the top of my head, here are my computer specs:

  Windows Vista SP1
  Intel Core i7 940
  12 GB of ram
  NVIDIA FX 1700

  Update on the situation:

  I've posted on several technical forums and 2 of them have been asked to go into SafeMode Add/Remove programs and uninstall then windows updates...

  The problem with that is that my computer does not record the fact that he just installed an update... It is said that the update performed on the computer has been on the 17th of September... the date today here is Sept. 23...

  I uninstalled the 2 updates from 17 without prevail... the problem persists... I load windows in normal mode... and 30 sec-1 min later it freezes just on loading things...

  Should I just keep uninstalling windows updates until the problem is solved?

  No answer to this problem... two days of discussions of the forum tech 6... 1 hour 4 telephone conversation with microsoft support technology... end result? Reinstall Windows... GG

• Windows Update Advisor problem

  I installed the Windows Update Advisor and now my laptop does not start automatically.  I did a boot safe mode and tried to uninstall Windows Update Advisor and cannot uninstall.  He said to contact Microsoft.  What I can do. Please email me @ * address email is removed from the privacy * if you can help.

  Hi hulagyrl101,

  1 are you referring to upgrade advisor?

  2. what happens when you start the laptop?

  3. you receive an error message?

  4. What is the version of Windows installed on the computer?

  You cannot uninstall any program from safe mode.

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you perform a clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Outlook 2010 has stopped working after Windows updates

  November 11, 2015, my desktop, operating system Windows 7, installed about 28 updates to Windows. When I then put running the computer and open Microsoft Outlook 2010, Outlook closed almost immediately and this message appeared: "Microsoft Outlook has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. "(I don't check other office software).

  After the problem with Outlook 2010, I rebooted the computer several times and each time has experienced the same problem with Outlook 2010.

  I used system restore to restore the system to before the updates of Windows, which included a critical update. Outlook, then worked correctly. I changed the settings for Windows Update to "Never check updates" so that Outlook is not yet damaged.

  Was it something wrong with the Windows updates?

  The problem was solved when Microsoft released a revised version of the KB3097877 update. Maxwell Joseph, moderator of the Forum Microsoft, announced this in the post, he created at 23:22:03 on November 12, 2015, on the thread titled "update KB3097877 crash.

  He said ' Microsoft has released a revised update, so we suggest you go ahead and uninstall Windows updates KB3097877 > installed updates. Restart the system and run the updates check and reinstall it back. »

• What is the best way to uninstall an update of windows

  no details

  There are 2 ways to do this:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point before your update has been installed.

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

  How do uninstall Windows Vista updates.
  Read the info on the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Update uninstalled audio output? (Conexant HD)

  I'm running a Pavilion DV9700 with Vista Home Premium. Windows decided to do an automatic update this afternoon and I now no sound. When I move the mouse over the tray icon, I see "No Audio output device installed. It was working perfectly before this update.

  Here is what I tried (and results) and try (reason).
  I can't update the driver for a device that is not installed.
  I searched on hard disk for Conexant, audio, player, sound. Unable to find anything that will help you.
  I thought to uninstall updates... but there are about 40 of them, and there must be a better solution.

  I can not deal with no music... any advice would help.

  BTW, I already said the system can perform automatic updates, but that's another debate for another day.

  The update removed somehow the audio device. I tried to download and reinstall, but kept running into problems with the installation. My system did not create (first time I ever saw that) restore points, so I had nothing. I ended up restarting in safe mode and perform Windows Update setting, then reboot back into normal mode, and he's back.

• How can I uninstall the Windows updates?

  my computer became very slow after installation fails Windows updated!

   

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Windows updates failed (I think due to losing files to uninstall)

  Hello.

  Earlier, I thought (stupidly) I got a lot on unnecessary temporary files on my system and remove a bunch; somewhere in the $Uninstall files.  Since then, I had problems with all the various updates.  I've sorted most but the four following windows just keep for lack of updates:

  -The 2007 Microsoft Office Suite Service Pack 2 (SP2)

  -Update for Microsoft Office System 2007 (KB967642)

  -Security Update for 2007 Microsoft Office System (MB951944)

  -Update for Microsoft Office 2007 (KB951550)

  These are always invited during my stop but always fail.

  I am running Windows XP Professional Version 2002 Service Pack 3 and office (Professional, I think) 2007.

  Anyone know what I can do to get those pesky updates installed? Or are they not crucial, in this case, how to hide... forever!...

  Thank you...

  You receive an error message when you try to apply service packs for Office 2007 on a computer that is running WinXP SP2 or SP3]
  http://support.Microsoft.com/kb/942101

  Tip: Insert your Office 2007 CD-ROM into the Bay before the next attempt to install appropriate.

  Tip: If no joy, see if you can download the "fullfile" version updates viahttp://www.microsoft.com/downloads/ orhttp://catalog.update.microsoft.com/ and then manually install / them.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Today the Windows Update error, can not update, uninstall / reinstall - 0x8004FF07

  2 computers, XP SP3, installed updates, no other TITLE or AM programs installed, no viruses on computer

  On computer 1: Windows Update (update of the MSE customer) has failed. MSE stops working, can't be uninstalled or reinstalled - error 0x8004FF07.

  On computer 2: Windows Update has failed. MSE in collaboration, upgrade manual - error 0x8004FF07. Windows Update download update again and again and failed.

  How can I uninstall and reinstall MSE on 1 computer? I tried "mssefullinstall-x86fre-en-us - xp.exe/u", add / remove programs, always error 0x8004FF07 :-(

  krmkk,
  You can try the Windows Installer Cleanup utility to remove MSE.  You can also browse the forum to start MSE .

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Player 12 is uninstalled by Windows Update?

  I am setting up a new computer running Windows 7 Edition Home Premium.  I went to the Windows Update site and concluded there are 37 updates available for download.  While Windows Update is running, the Media Player application was completely uninstalled with the shortcut on the desktop.  When I search for programs and files for the 'media', only the Media Center is located.  That's happened?  Can someone provide a link I can use to download and reinstall Media Player 12?

  Hello Mutt-man,

  Do you have update installed?

  You can check the updates installed in the history of the update.
  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  Windows media player may have been disabled. I suggest you try the steps and check them off below.

  1. close all programs.
  2. click on the Start button and then click Control Panel.
  3. under programs, click on uninstall a program.
  4. in the pane tasks, click on turn Windows features on or off.
  5. in the windows features list, click the plus sign next to multimedia functions.
  6. under multimedia functions clear the check box next to Windows Media Player.
  7. you receive a warning message in a pop-up window. Click Yes.
  8. now restart the computer and then go to Windows features turn on or off features. Place a check for Windows Media Player. You receive a warning message in a pop-up window. Click Yes.
  9. restart your computer.

  For more information, visit the links below:
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off
  http://Windows.Microsoft.com/en-us/Windows7/what-happens-if-i-turn-off-media-features
  http://Windows.Microsoft.com/en-us/Windows7/what-happens-if-I-turn-off-Windows-Media-Player
   
  Hope this information is useful.
   
  Umesh P - Microsoft Support

• Is there another difficulty to break the Visio Viewer after that application Windows update KB973525 also uninstall this security patch?

  After the Windows update KB973525 has been applied to the PC with Windows XP SP3, Visio 2003 Viewer, and 2007 will not come upward.  It displays only a white screen with a red X.  If the update is uninstalled, then the Visio Viewer works.  The update is a security fix, and we want to keep this update installed.  Does anyone know another way to solve this problem?

  Hi Tdiphoffman,

  Thank you for visiting Microsoft Answers.

  I suggest you to install the Microsoft Office Visio 2007 Service Pack 2 from the link below:

  List of all the system of Office 2007 Service Pack 2 and Windows SharePoint Services 3.0 Service Pack 2 packages

  http://support.Microsoft.com/kb/968170

  Then install the update of security for the Visio 2007 Viewer from the given link:

  http://support.Microsoft.com/kb/973709

  If this does not help, you can also contact the support for Microsoft Visio Viewer for further assistance.

  http://Office.Microsoft.com/en-us/help/FX100485361033.aspx?pid=CL100605171033

  Link to view:

  Visio 2007 solutions Center

  http://support.Microsoft.com/ph/11389

  Check out this link where the user had a similar problem:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/a3a53101-ed31-4b59-9102-df7848143bcd

  Hope the helps of information. Please post back and we do know.

  Kind regards
  Joel S

• Quicken uninstalled after Windows Update

  After running Windows Update and install the updates, I discovered that Quicken software I had installed and used on my PC has been uninstalled.

  My OS is Windows Vista Premium
  After installing updates with Windows Update I couldn't see Quicken to control panel > programs
  The Quicken desktop icon disappeared
  Quicken has been removed from the start menu
  My Quicken data and some (but not all) of the program (x 86) files \Quicken files were still intact

  I installed 15 updated 11/1 and 17 updates 31/10. Many have been associated with MS Office, but a few were related to Windows Vista.

  Is this behavior (Programs uninstall) a bug in Windows Update?

  I would like to avoid that from happening. Any suggestions on how to prevent?

  Hi sshostek,

  Welcome to the Microsoft Answers community.

  This behavior is not a bug in Windows Update.

  Download Quicken manually and install it.

  To avoid this kind of behavior try to install the updates in clean boot mode.

  Follow the steps to enter boot mode:

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the Load Startup items check box.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. try to update your computer now.

  http://support.microsoft.com/kb/331796 . In addition, refer to the section on how to restore your computer to a Normal startup mode

  Hope this information is useful.

  Let me know if it worked.

  Thank you, and in what concerns:

  Umesh P - Microsoft Support

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Problems with Windows Update after uninstalling SP2 (Vista Home Premium)

  Hello, everyone!

  Two days ago, I tried to install SP2 through my Windows Update. During the installation and then restart, it stopped on step 3 (0%), ignored and open Windows normally. But, I realized that I had totally lost Aero (I didn't even have the option in the window color and appearance), and also Windows Update constantly gave me the message that I always important updates - SP2 has not installed correctly (I rebooted the computer several times to try to resolve this problem, but everything remained the same: stop on step 3) ", running Windows, and once again the message that I've updated important). I searched in various forums, but could not solve the problem, so I decided to uninstall SP2 via Control Panel. But it doesn't let me do that - whenever I clicked on the button uninstall, it says that the installation is not finished yet. So, I tried the system restore, but whenever I clicked it, an error message (that I didn't understand at all) appeared. So, I went into safe mode and tried the system restore and it worked (Control Panel uninstall option does not in Mode safe either), and everything is back to SP1. But now I have problems with Windows Update - I get the error message 0 x 8007002 (and even 0 x 8007005 several times). I tried everything I could find in the forums (the thing with automated updates service does not because I don't have this option in Services), but nothing works. If anyone has any advice whatsoever, I would be really grateful for that, because I don't know what to do.

  For safety, I use NOD32 anti virus, Tall Emu Online Armor and ThreatFire.

  Thank you very much!

  Hi EvanaZgb,
  Thank you for visiting the Microsoft Answers forum.

  I would say to first disable the anti virus and other security software. Then proceed as follows:

  STEP 1
  ------------
  Download and install the latest version of Windows Installer
  To install the latest Windows Installer, visit the Microsoft Web site at the following address:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Step 2 now try to update again and post back with the results
  ------------
  Cleanup, utility to download and install the Microsoft Windows CleanUp utility. To do this, see the Microsoft Web site: http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Now try to update again and post back with results

  Thank you

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think