Unique to the multiple SSID and possible access point single channel?

Hello world.

I have a silly question.

Let say, we have three VLAN, vlan1, 2, 3 and they are mapped to the following wireless LANs:

VLAN 1 ssid1

VLAN 2 ssid2

Vlan3 ssid 3

AP - trunk - dagprogramm network.

Our access point has mobile devices in three local wireless networks, IE ssid1ssid2 and ssid3

Since the mode AP use half duplex, mobile devices need acknowledgement positive to ap they can send data, so once channel let channel 3 (assuming that 802. 11b is used) can be shared by all the devices in three local wireless networks.

My understanding is correct?

Thanks and a great weekend.

An access point = an associated action related channel and each ssid and the customer that one channel and the AP is essentially as a hub

concerning

Joe

Tags: Cisco Wireless

Similar Questions

  • LAPN300 - the best configuration for 3 access points, while using the same SSID

    Hi all

    What is the best configuration for 3 x LAPN300 located in various places around my house of 3 floors, access points if I want just one SSID?

    I did some initial research which suggests that I can use the same SSID on all three, as long as they are on different channels. 1, 6 and 11 for example. In theory, then, as I wander around the House the client machine must auto swap to the AP with the signal stronger.

    What do you think? What is the best way or do, or could suggest you something else?

    As an aside... If I decided to create a second SSID for the guests at home, I would also want to add wireless isolation to this SSID. How would that be managing the DHCP server on the local network? How would be asked to connect to the SSID has never get an IP if they have been isolated from other clients on the local network?  Besides, how they see the router? The ANNUAL lets you specify exceptions to this isolation for this feature?  Alternatively, as I suspect, is the right isolation feature isolate them from other WLAN, not the LAN clients customers?

    I did some testing and configuration of the AP with the same SSID and security will do what you want. Don't worry about setting the channel because the auto channel setting works with these devices and automatically adjusts the spacing between the appropriate channels.

    Recommendation of the VPN_user is what you need if you want to isolate the SSID comments from the rest of your network clients.

    Isolation of SSID of the AP will guard only wireless devices to communicate with each other on the same SSID on which it is enabled.

  • What is the best way (and possible) to remix a song mixed

    GarageBand 10.1.1

    10.11.4 OS

    Mac Book Pro

    16G RAM

    Hobby old YR 68 recording guy/try to leave a legacy

    What is the best way (and possible) to remix a song mixed

    I have a song that is most often improvised, I was told that his cool, however, re-registration is not possible.

    After reading a lot on the mixture, I now hear where the uneducated choice and errors that I made which explains the sound "not as good" that the song is.

    Before I just jump in and try to undo the settings on the tracks (one is DRUMMER) to return to the raw track before effects/eq/compression ect. is is possible to do?  Opens the unfavorable mix, rename it, save it and just go to work and cancel or disable 'things '.

    The basis of the lean mixture comes even to the root where I 'hot' securities, (orange and red)

    I guess by now you understand my question and I am open to a favorable opinion.

    Thanks in advance for your help.

    jojoguiitar_mn_usa

    I read this question so many times and I can't seem to figure out exactly what you're asking.  You just ask if you can go back in your GarageBand project and edit your tracks again?  Of course, you can, why not you?

  • Unique SSID from the multiple SSID

    Hello

    We seek to deploy wireless at five sites great campuses, one in each State.

    Does anyone have any ideas on the deployment unique verus multiple SSID SSID for each location.

    Are the benefits of filing a return and security to identify red devices associated with

    a unique SSID.

    The question was raised that it would be easier to configure one SSID to scan wireless

    devices that have separate SSID different places.

    Would appreciate any experience on this design

    Mate,

    Remember, when you're dealing with WLC, you do not configure the APs.  You configure the WLC and configs will be propatated of all APs manages the WLC.

    The WLC, you can use up to 18 SSID but you can configure 1 024.

    Currently, I have three SSIDS and one of them is for VoWLAN.

    Moreover, some hand scanners do not like the (hidden) SSID broadcasting.

  • The filtering of the VPN 3000 with multiple businesses and internet access?

    Hello

    We have a scenario where we want to up to 6 companies to connect to a concentrator 3000 3002 HW-customers. Companies should be able to have access to the e a few machines at the central site and and at the same time having access to the internet. We will use network extension mode. They cannot use the PIN-tunnel and we want that all internet traffic through the central site.

    Anyone who think that using the 3000 for this "filtering" is a good idea or should I use an external router routing policies?

    I use the 3000 to complete tunnels and parallel with your corporate firewall. Set the default gateway of Tunnel on the 3000 to be inside the IP address of the firewall and add a static route on the 3000 to your internal network, pointing to your next hop router. Add static routes on your firewall for remote VPN network pointing inside the VPN3000 IP address. This way no matter what VPN traffic that is destined for your interior, network will go to your home router and nothing else (Internet traffic), will go to your firewall and get routed Internet.

    As to where you place the filters, you could put them either on the 3000, but personally I do not like the filter - rule in 3000 stuff too. I would put a list of access on your router (who carry static electricity pointing towards) which allows specific remote networks simply get to the individual inside the hosts and nothing else, it's a lot easier to manage.

  • Cisco Aironet 1131AG and measure access points to the power of the wireless signal?

    / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

    / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

    We have about forty points of access Cisco Aironet 1131AG spread over four floors and they all have a static IP (BVI1) on the same SSID, customers will be on its own virtual local area network (dhcp on 3750 switch) and they use several channels (1,6,11).  Cisco Wireless Control System is pending. This wireless network should support roaming for customers (there will be Wi - Fi tags of multiple AeroScout and wireless laptops). To measure the strength of the wireless signal and wireless coverage on each floor. My questions are:

    1. How to measure the strength of the wireless signal: we must meet at least three APs available with signal excellent (I guess for the WCS needs that will determine the position of the client in the building)? We thought to use NetStumbler and a few laptops with wifi and measure as many points as we can as simpler thing. Or should we use something like Cisco Aironet Client adapters for our mobile phone and then use Cisco Aironet Client Utility (is it worth buying for our analysis and measurement)? Any other idea?
    2. What signal level should we consider for a good wireless (dBm)?
    3. That we should propose for authentication, authorization and management accounting? What happens to the roaming wireless? I did not quiteunderstand WCS, WDS and WLC-that should be used for above tasks?

    Thanks in advance.

    "Use the command on the AP" sh dot11 associations "will give you the clients associated with success.  If you add the MAC address of the client at the end of the command, you will get detailed information.  Look under "Signal Strength" and "Signal to noise".  Under the strength of the Signal, you want a value of-75 dBm or lower (lower values the better).  -76 dBm and is bad.  Under Signal-noise, you want a value of 25 dBm or more (values higher the better).

    To measure the strength of the signal, I use Airmagnet, but you can use Netstumbler or Cisco Wireless Site Survey.

  • Disseminate the Multiple SSID

    Hello

    I have an AP 1252 and I wanted to know what I need to do to set up to broadcast multiple SSID

    y at - it something I need to do on the web interface or something through CLI. Thanks in advance

    and have a great day.

    Please copy - paste the 'controllers to see the output. This will let us know if we can or we cannot broadcast multiple SSID.

    The command to enable this featute is...

    AP (config) #int dot11 0

    AP(Config-if) #mbssid

    SSID #dot11 AP (config)

    AP (ssid-config) #no - guest mode

    AP (config-ssid) #mbssid - guest mode

    SSID #dot11 AP (config)

    AP (ssid-config) #no - guest mode

    AP (config-ssid) #mbssid - guest mode

    This will do

    Concerning

    Surendra

  • C4580 install disables the XP firewall and internet access for 3 minutes at the start of the PC

    After installing C4580, when I turn on my Dell Inspiron C510m, XP tells me that the firewall is disabled, I can't access to the internet or even my router nor can I use the Applets in Control Panel that could help me sort these things. After 3 minutes, the Firewall WARNING disappears and everything is fine, but none of the updates antivirus and software update checks performed and I have to perform these tasks manually. The printer works fine, but it worries me that this behavior indicates a potential vulnerability - it's like something kept the door open to let the unpleasant things in the computer. Uninstall the HP software solves the problem, and he re - install it reminds me once again. There is something hanging in a HP driver at startup?

    PeterM

    I found the answer to this one, if anyone is interested, even if the solution required a work-around on the way. Suggested HP support I have just uninstall and install software downloaded from their site (PS_AIO_04_C4500_USW_Full_Win_enu_120_210.exe). This indeed solve, and another problem I had (see network & Wireless forum), but this download is missing the software package I.R.I.S. OCR, presumably for reasons associated with 3 rd-party lisensing. HP support insisted that this download was the OCR, but the OCR .exe is certainly missing. Workaround needed to go back and re - install the CD software, then uninstall everything except the OCR package (you can do), then install the downloaded version. My PC still takes too long to start, but it's probably the combined effect of each software package, I never installed wanting home phone so that it loads.

    PeterM

  • No volume on the toolbar icon and cannot access the volume level

    When the computer stops unexpectedly, I lose volume icon. I can't accdd the volume icon in the control panel check to include the icon on the toolbar. I have sound but I can not access the volume level and have no volume on the toolbar icon

    Hello

    1. don't you make changes to the computer until the problem occurred?

    2 when was the last time it was working fine?

    I suggest you try the steps below and check if it helps

    Method 1: Try to run fix it from the link below:

    System icons do not appear in the notification area in Windows Vista or Windows 7, you must restart the computer

    http://support.Microsoft.com/kb/945011

    Method 2: Try the following steps to add the volume icon in the taskbar

    i. right click on the Start button and then click Properties.

    II. click the Notification area.

    III. put a check mark on the volume icon.

    IV. click apply & OK. Check if you see the volume icon in the taskbar.

    Method 3: If the problem persists, try the steps from the link below http://windows7themes.net/volume-icon-missing-in-windows-7-restore-it.html

    Hope this information is useful.

  • anchor tag unique to the multiple links on a page

    to makes things easy, I wanted to know how the arrow down on this site. Cyclemon / experience of the... It is a single anchor tag pinned down. It is just move to the bottom of 1 article to another. I have no idea how to do that and I'd like someone to teach me. Thank you.

    I was going by the code that has been on this page. The problem you would have with the implementation with Muse in this way is that the code directly references the name of the div on the page. Muse names arbitrarily its containers, so you should publish the page and note the names he gives them before that you could write code to do it.

    Is there a reason that you should do this instead of the standard anchor method?

  • Expand the lan cable and other wired point

    Hello

    I have I need suggestion for my problem.

    I use a router WAG320N in my house, but now I need to extend my local network with other ports and wireless coverage.

    In a wired point (connect directly to the router) I need 3 ports ehternet and a repetear of a wireless signal.

    The solution optimal woulb be a gigabit switch with an integrated access point, but I understand that there is no such thing...

    Established through the acquisition of SE2500 and the AP WAP610N switch... but then I realized the existence of the WES610N bridge.

    But the information on the Italian site of linksys is not and the page works... I need to now if this object may take a wired lan replicate in 3 ports and extend the network wireless to my router.

    Can someone help me?

    Thanks for the reply and sorry for my English.

    RDWare

    You have a wired connection. You don't want a wireless as the WES610N bridge. You only need that if you did not have the wired connection.

    You can either buy a switch and a gateway dedicated like the SE2500 and WAP610N or you can buy all of the new routers series E. The E series routers can be met and so essentially used as a standard switch and AP.

  • The upgrade of Cisco 1600 access points

    A customer has Cisco 1600 12 access point and they want to add 3 access points. These access points are autonomous access points and the customer is tired to make individual changes by access points.  I suggested that the new access point be base controller, so my question; These existing access points can be upgraded to LWAPP? Or do need to be replaced? Or this controller one web-based access to existing contact points and be controlled.

    so my question; can these existing access point be upgraded to LWAPP? Or do they need to be replaced?
    Yes, existing AP can be converted into TOUR mode with a recovery image. Here's how you can do it (note that there are several ways) http://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/ http://mrncciew.com/2013/12/13/ap-conversion-using-mode-button/ is the good idea to get a WLC (like 2504) to manage in a simple way, rather managing them individually. See below the product bundles available. If this is the case, you will get with license 25AP 2504 for almost for free when you buy 2 x 1702. Make sure that you choose the product of appropriate regulatory AIR-AP1702I-A-WLC HTH Rasika * Pls note all useful responses *.
  • Creation of Validation for the multiple selection list or shuttle point

    Hello
    I'm new to APEX and have questions about the best way to validate the selected shuttle items to verify that they exist in the sys.dba_roles table before submitting. The shuttle point uses a static LOV. I would like to than the error message to display when there is no such thing as a role selected in the element of the shuttle in the sys.dba_roles table.

    Using version 3.2 of APEX
    DB version 9.2.0.8.0
    Internet Explorer version 6

    I tried to create a validation step level about to shuttle P3_ROLE using SQL EXISTS when you press the button SUBMIT. I know that when argued that the shuttle point returns the selected values in a single string delimited by a colon. I use the APEX_UTIL. STRING_TO_TABLE to convert values selected in a table.

    CODE HERE
    declare
    l_selected APEX_APPLICATION_GLOBAL. VC_ARR2;
    number of l_num;
    Start
    l_selected: = APEX_UTIL. STRING_TO_TABLE(:P3_ROLE);
    BECAUSE me IN 1.l_selected. COUNTY
    LOOP
    Select 1 from l_num of sys.dba_roles where role = l_selected (i);
    END LOOP;
    end;

    This is the error ORA-00928: lack of SELECT keyword
    1006 - ERR error in the validation routine.

    Any advice? Thoughts? Thank you.

    Published by: Violet on Oct 14, 2010 14:50

    Hello

    Your code is PL/SQL block. You cannot use this type of validation with your code.

    Try to change the body type of the function that returns the error text and
    code for this one

    DECLARE
      l_selected APEX_APPLICATION_GLOBAL.VC_ARR2;
      l_num NUMBER;
    BEGIN
      l_selected := APEX_UTIL.STRING_TO_TABLE(:P3_ROLE);
      FOR iIN 1..l_selected.COUNT
      LOOP
        SELECT count(1) INTO l_num FROM sys.dba_roles WHERE role = l_selected(i);
        IF l_num = 0 THEN
          RETURN 'Role not exists';
        END IF;
      END LOOP;
      RETURN NULL;
    END;
    

    Kind regards
    Jari

  • Delete the e-mails on the main account and cannot access Icloud

    Hello

    I deleted my email main and put Icloud account on my Iphone but not my Mac of Air. Now I can't access Icloud on my Mac or sync my devices. As a dimwit, I forgot my old email password, which today does not exist in any case how can I rectify this?

    Thank you

    So, you actually changed the Apple ID of the email from the old address to the new? If Yes, then you can connect to your Mac using the current password.

    If you have created a brand new Apple ID for your new email address, you will need to sign in the old email address (it does not matter whether the actual email account exists or not, ID Apple still doesn't work), then click on reset password: Apple - my Apple ID. If you have forgotten the answers to Security Questions, you will need to contact Apple support: ACCOUNT SECURITY SUPPORT

    I hope you just change the ID... it's much easier!

    See you soon,.

    GB

  • Create the new user and remote access

    Hello, I create a new user from the admin panel. Now, I want to ask how my friend will have access to my nas also. He tries to connect from https://readycloud.netgear.com/ but it does not connect!

    I want to create some users and they can have access to my files from ther House. How can I do?

    I sin ready 102.

    Thank you

    Hi h_tsopelas,

    Please check this articleReadyCLOUD.

    I hope this helps!

    Kind regards

    BrianL
    NETGEAR community

Maybe you are looking for

  • URLs are hidden in the search result

    Hello I have a problem with the search results. I mean that the URL of the search results are hidden and I can't see them. Either way, Internet explore, I have no problem with the results. I did a screen capture to see my problem. mozilla ptrscn.

  • Cannot open from Big Fish games

    I was a member of Big fish for years, this is the first problem I've had.  When I try to open a game, he appears in a box and said:drmactivator application does not, or127.0.0.1 port 4664 does not apply and at the same time myWindows Defender Update

  • Lost tools cut and paste

    Even if I right click on the icons are not available

  • The easy transfer of work since XP to XP? __

    My wife doesn't want to upgrade to a PC with Vista/7 yet, because she applications she loves on his slow PC XP old who do not have the Vista/7 compatible versions. I was able to buy a PC XP used through my company with a faster processor and more mem

  • Delay in the display of the song

    When I press the next song button on the player, the song begins, but it is not displays the name of the song or artist, it keeps displaying the name of the previous song, it seems completely random for me, I don't know what actually disappear, someo