Unit test: behavior another header in recordsets provided and received led to false a test failure

Dear team of SQL Developer,

It seems that the headers in the expected and received Recordset behaves differently: the headers of expression in the expected Recordset are truncated to 30 characters and the same expression in the set of records received headers are not truncated, which leads to a false failure of a unit test. That is that the records are the same in both sets of records, but the test run fails to comparison of sets of records due to the different headings. Please see the screenshot below:

Expected_and_Received_Headers.jpg

Here's the test case if you need to reproduce the problem/bug in your environment:

1. use the default schema of HR of the Oracle examples package that comes with an 11 g database.

2 create a PKG_TEST package with the source code below in the HR schema:

----------------------------------------------------------------------------------------------------------------------

create or replace PACKAGE PKG_TEST AS

TYPE EmployeeInfoRec IS RECORD

(

employees.last_name%type last_name,

first name employees.first_name%TYPE,

E-mail employees.email%TYPE

);

TYPE EmployeeInfoRecCur IS REF CURSOR RETURN EmployeeInfoRec;

FUNCTION upperCaseLastName (p_Last_Name employees.last_name%TYPE)

RETURN varchar2;

FUNCTION getEmployeeInfo (p_Emp_Id employees.employee_id%TYPE)

RETURN EmployeeInfoRecCur;

END PKG_TEST;

----------------------------------------------------------------------------------------------------------------------

CREATE OR REPLACE PACKAGE BODY PKG_TEST AS

FUNCTION upperCaseLastName (p_Last_Name employees.last_name%TYPE)

RETURN varchar2 AS

BEGIN

RETURN upper (p_Last_Name);

END upperCaseLastName;

FUNCTION getEmployeeInfo (p_Emp_Id employees.employee_id%TYPE)

RETURN EmployeeInfoRecCur AS

v_EmployeeInfoRecCur EmployeeInfoRecCur;

BEGIN

OPEN FOR V_EmployeeInfoRecCur

SELECT upperCaseLastName (last_name),

first name,

E-mail

This_is_very_long_table_alias employees

WHERE employee_id = p_Emp_Id

order by 1 CSA;

--

RETURN v_EmployeeInfoRecCur;

EXCEPTION

WHILE OTHERS THEN

LIFT;

END getEmployeeInfo;

END PKG_TEST;

----------------------------------------------------------------------------------------------------------------------

3. create a unit test for the PKG_TEST.getEmployeeInfo stored procedure: (click the command create test, select the stored procedure, click Ok for the pop-up message, click Finish).

4. update the default value with the following dynamic query and save the changes.

Select the cursor)

SELECT pkg_test.upperCaseLastName (last_name),

first name,

E-mail

This_is_very_long_table_alias employees

WHERE employee_id = idqry.employee_id

order of the 1 CAD

) RETURNS $,.

idqry.employee_id as P_EMP_ID

from (select employee_id

employees

where rownum < = 5) idqry

5. run the unit test newly created in the debug mode to display the shot.

The work around is to use an alias for the expression of long short, but our code is in Production, and we do not a new version whenever soon to add aliases... but we plan to use SQL Developer to automate our unit of PL/SQL code, tests once we clearly have some of the problems with the tool, we know...

Please advise...

Thank you

Val

Of course, Jeff... CS it logged as a bug... could be changed to apply for development later, I guess...

BUG 19826375 - header BEHAVIOR IN the GAMES of RECORDS EXPECTED/RECEIVED LED to the ERROR

Thank you

Val

Tags: Database

Similar Questions

  • Unit test: calculation of the length of the different columns in recordsets provided and received led to false a test failure

    Dear team of SQL Developer,

    It seems that the calculation of the length of the column in the expected and received recordsets behaves differently in some cases (when stored proc variables are used in the generation of the REF CURSOR, despite the explicit definition of the type of record): the length of the header and the length of the value in the set of records received are truncated to arbitrary length based on the returned value which leads to a false failure of a unit test. I.e. registries are the same in both sets of records, but the test run fails to the comparison of the recordsets because of different length. Please see the screenshot below:

    Expected_and_Received_RecordSets.jpg

    Here's the test case if you need to reproduce the problem/bug in your environment:

    1. use the default schema of HR of the Oracle examples package that comes with an 11 g database.

    2. change the HR. Table EMPLOYEES with the addition of a new column VARCHAR2 (4000) LONG_LAST_NAME:

    ALTER TABLE HR. EMPLOYEES

    ADD (LONG_LAST_NAME VARCHAR2 (4000));

    Update hr.employees set long_last_name = last_name;

    commit;

    3. create a PKG_TEST2 package with the source code below in the HR schema:

    ----------------------------------------------------------------------------------------------------------------------

    create or replace PACKAGE PKG_TEST2 AS

    TYPE EmployeeInfoRec IS RECORD

    (

    long_last_name employees.long_last_name%TYPE,

    first name employees.first_name%TYPE,

    E-mail employees.email%TYPE

    );

    TYPE EmployeeInfoRecCur IS REF CURSOR RETURN EmployeeInfoRec;

    FUNCTION getEmployeeInfo (p_Emp_Id employees.employee_id%TYPE)

    RETURN EmployeeInfoRecCur;

    END PKG_TEST2;

    ----------------------------------------------------------------------------------------------------------------------

    CREATE OR REPLACE PACKAGE BODY PKG_TEST2 AS

    FUNCTION getEmployeeInfo (p_Emp_Id employees.employee_id%TYPE)

    RETURN EmployeeInfoRecCur AS

    v_EmployeeInfoRecCur EmployeeInfoRecCur;

    v_LongLastName varchar2 (4000);

    BEGIN

    Select long_last_name from v_LongLastName

    employees

    where employee_id = p_Emp_Id;

    --

    OPEN FOR V_EmployeeInfoRecCur

    V_LongLastName SELECT long_last_name,

    first name,

    E-mail

    This_is_very_long_table_alias employees

    WHERE employee_id = p_Emp_Id

    order by 1 CSA;

    --

    RETURN v_EmployeeInfoRecCur;

    EXCEPTION

    WHILE OTHERS THEN

    LIFT;

    END getEmployeeInfo;

    END PKG_TEST2;


    ----------------------------------------------------------------------------------------------------------------------

    4. create a unit test for the PKG_TEST2.getEmployeeInfo stored procedure: (click the command create Test, select the stored procedure, click Ok for the pop-up message, click Next, click Finish).

    5. update the default value of dynamic query of value with the one below and save/post changes.

    Select the cursor)

    SELECT long_last_name,

    first name,

    E-mail

    Employees

    WHERE employee_id = idqry.employee_id

    order of the 1 CAD

    ) RETURNS $,.

    idqry.employee_id as P_EMP_ID

    from (select employee_id

    employees

    where rownum < = 5) idqry

    6. run the unit test newly created in the debug mode to display the shot.

    Thus, the record type 'EmployeeInfoRec' in the package clearly defines the LONG_LAST_NAME as VARCHAR2 (4000) through reference for the data type of column in the referenced table.

    But for some reason, the SQL Developer does not calculate correctly its length in the recordset "Receipts" If a variable is used (could be one as variable simple varchar2 in this reproducible test or complex variable of type of the object).

    Any ideas on that? Looks like another bug...

    Thank you

    Val

    The bug has been reproduced by the SRB and documented within the system of Support of Oracle SQL Developer team to pick it up:

    Bug 19943948 - TEST UNIT RETURNS EXPECTED ERROR: [LONG_LAST_NAME

    Hope the bug name can later be changed to something more descriptive, but it is not really... my only concern is the speed at which the known bugs would be fixed...

    Thank you

    Val

  • How calculated the code coverage in unit test infrastructure

    I'm looking for documentation on how the unit test framework calculates code coverage.

    I just recently installed the unit test framework and I had mixed results with the code coverage feature.  I manually calculated all the branch points in my vi, but the framework calculates more that I can think of, which gives a value of code coverage less than stellar (51%).  Is there documentation for how it is calculated?  I'm either missing something fundamental, or there is a bug with the framework.

    My vi consists of a loop (with shift registers) uninitialized which runs once.  On the inside of the loop is a business T/F structure that leads to a listed case structure possible two cases (one of which is the default value)... pretty basic.  Inside one of the structures is a loop and the other is cross.  For some reason, the unit test framework calculates 7 "flags chart run.  I use the method of "external" test harness to call all my test cases for the vi under test, b/c frankly it was easier to use than the UI provided.  I don't know if this is the cause, b/c I saw the other oddities when using it, which I'll save for another thread of discussion.

    Code coverage is calculated by dividing the number of diagrams, code that was executed by the number of diagrams in your VI altogether. Each VI has at least 1 schema (schema-block real). Loops have a single diagram each, case structures and sequences have a single diagram by image and so forth (=> from your description, your VI has at least 7 diagrams). You can double-click the patterns that were not executed in the Unit Test Framework results dialog box to be displayed.

    This approach does not reflect the amount or complexity of the code that contains each diagram. We looked at various ways of counting nodes, terminals, controls, son and other, that would give you a number that reflects your code with more precision. Unfortunately, neither of these approaches gives values that can easily be understood without some knowledge about the inner workings of LabVIEW. We chose to go with a solution that is completely transparent to end users.

    Thank you

    Herbert

  • Control of canoe of unit tests in LabVIEW on ActiveX

    Hello

    I want to run the unit tests of canoe in LabVIEW using ActiveX.

    EnvVars and sysVars in canoe handling was not a big deal, and there are plenty of examples here.

    But the unit tests of handling is quite difficult. Canoe help file shows this way in the object hierarchy:

    I solved the problem with the help of vector Support. They sent me the following c# example:

                MApp CANoe.Application = new CANoe.Application ();
    CANoe.Configuration mConf = (CANoe.Configuration) mApp.Configuration;
    CANoe.TestSetup mTestSetup = (CANoe.TestSetup) mConf.TestSetup; Test settings window
    CANoe.TestEnvironments mTestEnvs = (CANoe.TestEnvironments) mTestSetup.TestEnvironments;
    CANoe.TestEnvironment mTestEnv = (CANoe.TestEnvironment) mTestEnvs [1]; Test environment (file *.tse)
    Console.WriteLine ("Name" + mTestEnv.Name);

    CANoe.TestSetupFolders mTestSetupFolders = (CANoe.TestSetupFolders) mTestEnv.Folders;
    CANoe.TSTestModule mTSTestmodule = (CANoe.TSTestModule) mTestEnv.TestModules [1];
    Console.WriteLine ("Name" + mTSTestmodule.Name);

    CANoe.TestSequence mTestSequence = (CANoe.TestSequence) mTSTestmodule.Sequence;
    Console.WriteLine ("Count TestSequence" + mTestSequence.Count);
    CANoe.TestCase mTestCase = (CANoe.TestCase) mTestSequence [1];
    Console.WriteLine ("Name of Testcase" + mTestCase.Name);
    mTestCase.Enabled = false; disable the unit test - XML and structured NET only module.

    CANoe.TestReport mTestReport = (CANoe.TestReport) mTSTestmodule.Report; Access to the report

    CANoe.Measurement mMeasurement = (CANoe.Measurement) mApp.Measurement;
    If (! mMeasurement.Running)
    mMeasurement.Start ();

    mTSTestmodule.Start ();

    I realized that you can cast the ActiveX object references to another class of the child in the following way:

    It was the right solution and I want to share with you.

  • Unit test, Visual Studio 2010 digital input read event

    Hello!

    I have problems in Visual Studio 2010, using NOR-DAQmx, but ONLY in a unit test project. I have compiled a dll that uses a DigitalChangeDetection task handler. The dll work very well in a draft standard form, but does not work in a Test project.

    I used .NET Framework 4.0 with success. Tried to switch to .NET framework 3.5, but it is not possible for a test project in Visual Studio 2010.

    When I start my test, it works fine until the event is raised. Once he does, the test will stop without exception or detail except the following result:

    "The agent process was stopped during the execution of the test."

    Nothing is caught in the trap in debugging.

    Also, I get the following in the Event Viewer error message:

    Log name: Application
    Source: VSTTExecution
    Date: 2010-12-01 11:32:31
    Event ID: 0
    Task category: no
    Level: error
    Keywords: Classic
    User: n/a
    Computer: xxx
    Description:
    The description for event ID 0 in source VSTTExecution is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

    If the event is on another computer, the display information had to be saved with the event.

    The following information has been included in the event:

    (devenv.exe, PID 5592, walk on 73) OutOfProcessStrategy.ProcessMonitorThread: The Agent process was closed unexpectedly. will attempt to restart

    the message resource is present, but the message is not in the string/message table

    The event XML:
    http://schemas.Microsoft.com/win/2004/08/events/event">
     
       
        0
        2
        0
        0 x 80000000000000
       
        10312
        Application
        xxx
       
     

     
        (devenv.exe, PID 5592, walk on 73) OutOfProcessStrategy.ProcessMonitorThread: The Agent process was closed unexpectedly. will attempt to restart
     

    I understand that Visual Studio 2010 is not yet officially supported so here's my 2 questions:

    -I'm the only one experiencing this problem? (Easily duplicated by taking the sample project: DotNET3.5\Digital\Read Values\ReadDigChan_ChangeDetection_Events and extract the relevent part of to put in a separate dll so that you can try to UnitTest in a project UnitTest.)

    -Update on what NOR-DAQmx will rely on VS2010? (I read here: http://forums.ni.com/t5/Measurement-Studio-for-NET/Support-for-Visual-Basic-2010-NET-4-Framework/m-p... this is supposed to be before the end of the year, but no updates would be great because I could not find any information on it)

    Best regards

    Pierre-Luc

    Hello Pierre,.

    As NOR-DAQmx is not yet officially supported in Visual Studio 2010, it is not quite clear why this problem occur. At this point, the official release date has not been announced yet, however, please continue to check the updates to www.ni.com/support (drivers and updates). Thank you

    Best regards

    M Ali

    Technical sales engineer

    National Instruments

    www.NI.com/support

  • Unit test Framework UTF Message error "Application Terminal invalid entry."

    Hello world

    I have a rather strange behavior with the UTF:

    I created a lvlib containing a few screws to be implemented by a student. To easily check if all requests are met, I created some Unit Tests.

    On my computer, everything works fine. On his computer, the following error message appears:

    Both computers are running on 2013SP1f2. Although mine has more power

    Known problems with the UTF on older PCs? Or specifically requested: where this error is from?

    See you soon

    Oli


  • Unit test in sql developer 4.1 fails but passes in 4.0

    I can't tell if it's a question of Java or Sql * developer issue.

    SQL * Developer Version: 64-bit 4.1.0.17.29

    Versions of Java: Tried jdk 8: 1.8.0_5, 1.8.0_20 and 1.8.0_31 - all 64 bits

    That is the message in the response of unit test:

    CPS_TOOLS.PREP_FOR_DELIMITED_FIELD failed: Missing defines
    oracle.jdbc.driver.Accessor.isNull(Accessor.java:744)
    oracle.jdbc.driver.CharCommonAccessor.getString(CharCommonAccessor.java:350)
    oracle.jdbc.driver.OracleCallableStatement.getString(OracleCallableStatement.java:661)
    oracle.jdbc.driver.OracleCallableStatementWrapper.getString(OracleCallableStatementWrapper.java:860)
    oracle.jdbc.proxy.oracle$1dbtools$1raptor$1proxy$1driver$1oracle$1RaptorProxyOJDBCStatement$2oracle$1jdbc$1internal$1OracleCallableStatement$$$Proxy.getString(Unknown Source)
    oracle.dbtools.raptor.datatypes.strategies.callablestatement.CallableBindingVARCHAR.customOutputByPosition(CallableBindingVARCHAR.java:51)
    oracle.dbtools.raptor.datatypes.strategies.callablestatement.CallableBindingDatumAtName.customOutput(CallableBindingDatumAtName.java:123)
    oracle.dbtools.raptor.datatypes.impl.CallableBindingImpl.getOutput(CallableBindingImpl.java:74)
    oracle.dbtools.unit_test.testObjects.UtTestImplArgs.getOutput(UtTestImplArgs.java:320)
    oracle.dbtools.unit_test.runner.Runner.executeRunn ...
    
    
    

    Now, the same unit test works with the following text:

    SQL * Developer Version: 64-bit 4.0.2.15

    The Versions of Java: 64 bit jdk 7 - 1.7.0_55

    I tried to follow here debug information collection:

    http://www.thatjeffsmith.com/archive/2012/06/how-to-collect-Debug-Info-for-Oracle-SQL-Developer/

    However, there is no report in the command window after a ctrl-pause/break. At the same time, however, it is not like sql * developer hangs here.

    Thoughts?

    EA 4.1 includes a new feature to save all JDBC calls (view > Log, and then note the statements tab in the logs pane), so it could be the difference in the behavior of Test Unit between 4.0 and 4.1.

    You use the JDBC default 12.1 driver, or you have overridden by specifying a particular Oracle client?  In other words, in

    Tools > Preferences > Database > advanced > use Oracle client > configure...


    I read that somewhere there may be problems when you use the clients pre - 12 c with earlier versions of JDBC. driver

  • Is there a real BENEFIT in SQL * Developer Automated Unit Testing?

    I'm trying to understand the unit test in SQL * Developer. Asked me to evaluate it as a method of test automation on an integration solution that we develop.

    (1) my 'A' schema has this table:

    SQL > DESC EMP

    Name                                      Null?    Type

    ----------------------------------------- -------- --------------------

    EMPID NOT NULL NUMBER

    EMPNAME VARCHAR2 (30)

    SALARY NUMBER (7.2)

    COMM_PCT NUMBER (2.2)

    Table (2). has these values:

    SQL > SELECT * from emps;

    EMPID EMPNAME SALARY COMM_PCT

    ---------- ---------- ---------- ----------

    1 ROHAN 10000.05

    2 JOHN 20000

    3 PETER.06

    4 SMITH

    (3.) I create this procedure in drive A:

    create or replace

    PROCEDURE award_bonus (NUMBER, sales_amt NUMBER p_empid)

    AS

    REAL Commission;

    comm_missing EXCEPTION;

    BEGIN

    SELECT comm_pct IN the commission OF EMP

    WHERE empid = p_empid;

    IF the commission IS NULL THEN

    RAISE comm_missing;

    ON THE OTHER

    PGE UPDATED

    SET salary = salary + sales_amt * commission

    WHERE empid = p_empid;

    END IF;

    END award_bonus;

    (4) now, I want to create a unit test in SQL Developer to test this procedure.

    (5) I created a user "unit_test_repos" according to the instructions in the tutorial.

    (6) ' SELECT OPERATION': I specifies the procedure of award_bonus.

    (7) ' SPECIFY the name of test': give a name and select "create with a single model.

    (8.) 'SPECIFY the STARTUP': Add a ' copy Table or the line "the startup process.

    -I give "EMP" as the source table.

    -And then I get this for the 'generated query.

    SELECT ROWID AS SRC$ ROWID, s.* FROM EMP s

    -Target table has "TMP$ AWARD_BONUS.

    (Q1) WHAT IS THE PURPOSE OF CREATING ANOTHER TABLE?

    (Q2) WHEN THE TEST IS DONE, ARE ROWS OF PGE copied into this table?

    (Q3) Why is this? Why can't the test simply read 'EMP '?

    (9) "PARAMETERS SPECIFY": I give "Input".

    -1 for P_EMPID

    -10000 for SALES_AMT

    -In "Expected result", I say "success."

    (Q4) So I should know in my mind the results of the proc, foregoing given entries?

    (10) ' SPECIFY VALIDATION': I add validation "poll rows of queries.

    -I paste the following query: SELECT count (*) FROM EMP WHERE empid = 1 AND salary = 10500

    -that is, I know that for an amount of 10000 sales, employee 1 will get a Commission of 10000*.05 = 500. For example, 10000 (its sal) + 500 = 10500.

    (Q5) The thought that the above is correct?

    (11) "TEARDOOWN SPECIFY": give nothing.

    (12) my unit test is created.

    (13.) I run now by clicking on the button of the beetle, to the left of the green arrow. Unit test is run.

    (14) now in my table a.emps, 1 salary has increased to 10 500, and the diag test case, I get the "execution results: SUCCEED.

    (15) now, I run the unit test again.

    (16.) salary 'EMP' table emp 1 is passed to 11000 (which is correct) and the so-called execution results "SUCCESS".

    (Q6)  My question is: the query I gave for validation, SELECT count (*) FROM EMP WHERE empid = 1 AND = 10500 salary, now gives 0. so, this means that no row is returned for this condition and so the test must FAIL. But how is SQL * Developer said that the test was SUCCESSFUL. How does this system of validation?

    (17.) I went through the tutorial, but I do not understand these concepts >

    (Q7) What is the purpose of disassembly? I undersand the option 'drop table' "disassembly", where you drop the temporary table, but I do not understand the others, 'Table or line restore' and 'code pl/sql user '?

    (Q8) WHAT IS the advantage of making the test like this? Can I use an Excel spreadsheet and make dozens of unit tests faster than this method?  It is easy to understand too. This method is complicated.

    Your answers and your advice would be greatly appreciated.

    The temporary table to hold the original values for EMP. After the test runs, you must configure the disassembly to reset the return values of the temporary for the next time table that the test works again, he has values of expected start.

  • Unit Testing C++ plug-ins

    Hello

    This can be an incredibly stupid question, because I'm not terribly famous (I used JUnit test before and that's all).

    I wrote a plug-in for Acrobat X Pro in C++ using Visual Studio 2010 and would like to know if it is possible to use to exercise my unit tests code.

    I think it should be a non-standard method of doing a suite of tests from the plugin must operate within acrobat (as opposed to being autonomous) in order to work or have data, functions, parameters, return values, no sense at all.

    I think that this could be done by exposing my profile in OLE automation or whatever that would allow an external program control my plug-in.

    Any ideas?

    Thank you.

    You could certainly integrate with all of the different unit tests

    frames BUT you must write the code that 'start' as

    well within your plugin and provide the user API to do.

  • 30EA2 - UNIT TESTING - value dynamic query truncating dates time.

    So I use the installation of SQL Developer Unit Testing (very nice by the by) for a bit now and just recently upgraded to the latest beta version (3.0.02.83). Looks like a bug has been introduced by which the dynamic query of value are truncate all time of all DATE data type information.

    This causes sadness serious for my current test cases and for me since I have to go back to the previous beta version :)

    I noticed that, in the new 30EA2 parameter:

    AddVMOption - Doracle.jdbc.mapDateToTimestamp = false

    has been introduced by default in

    [SQLDEveloper_install_dir]/sqldeveloper/bin/sqldeveloper.conf

    Perhaps it has something to do with the behavior of incorrect date, try to remove the parameter and check again.

  • Developer SQL 3 EA1: Unit Test

    Hello

    I just started to use the work unit test framework in SQL Developer 3 EA 1 and I need assistance, definition of a test case involving parent - child tables that are handled using an API from plsql. The API for the child table requires a registration key in the parent table. The parent record and its key is created by a process of starting test case. The key is retrieved using a query of dynamic value in the implementation of the test. It seems that the dynamic value query is executed before the start of the test case process have been executed. Is this expected behavior? My expectation is that the boot process are executed before the dynamic values query.

    Also, is it possible to use values resulting from processes of startup as the case other than type parameter values by using a dynamic query in value?

    Summary test scenario:

    2 boot process: the first deletes all the data tables parent and the child. The second inserts in a record in the parent table.

    No disassembly process.

    Test implementation: application of dynamic value that selects the key of the parent table and defines literals for the remaining parameters of test cases.

    1 process validation: check if a record has been inserted into the table of childe with expected values.

    Thank you

    Alistair

    Hi Alistair.

    We execute the dynamic query to control how many times the test (start, test cases, validation, demolish) cycle runs.

    To get the behavior you want, put the test in a test suite and test suite start do the initialization of the table for you.

    Brian Jeffries
    SQL development team

  • unit test: purge previous run

    Hello
    How can I remove the previous test runs? I tried tools-> repository purge but it deleted the unit tests as well, not only the results of tests :(

    Thanks for your help,
    Laurent

    Hi Laurent,.

    I'm afraid that this behavior is not supported in 2.1. It is however planned for a future release.

    Kind regards
    Philip.

  • How can I unit test screws with classes?

    I have my first VI using an oriented object approach I want to unit test. How in the world I have configure Unit Test infrastructure to accept a specific class? See the attached excerpt.

    Hi elrathia,.

    Here is a link that should help you:

    http://zone.NI.com/reference/en-XX/help/372584D-01/lvutfconcepts/utfc_tests_cases/

    Below, you can see an example location:

    labview\examples\Unit Test Framework\LabVIEW Class\LV Class.lvproj

    (Note this is for 2012)

    DylanC

  • Is there any unit test framework tools for DAQmx programmers who use C interface?

    I need to accuratly simulate DAQmx devices for the software in the development of unit tests. Are there tools available to make this easier?

    You have the integrated simulation of DAQ devices in MAX. The simulation is limited. It is explained in the NOR-DAQmx help (NI - DAQmx Key Concepts > NOR-DAQmx simulated devices).

  • Unit Test Framework: Inline Subvi test coverage

    Hello

    does anyone know if the Unit Test Framework considers inline subVIs recursively during the measurement of coverage?

    Consider following the example:

    f(a:int) {}

    g() ;

    }

    g() {}

    If (false) - return 1;

    else return 0;

    }

    Obviously, there is no test for g() with coverage of 100% (branch), and any trial for f() reaches 100%.

    My question is: given a test for f(), UTF gives a different cover if I set to be (Inline g()<100%) or="" not="">

    Thank you

    Peter

    Peter,

    No, the Subvi cannot be analysed for coverage of the code if the value inline.

    Fact is, that this feature requires the option 'Allow debugging' must be disabled (Yes, I hate double-negation!), but if it is not allowed to debug, the code coverage will result in 0%.

    See Help:

    "You have to allow debugging for each VI under test to measure the code coverage. If VI a VI under test properties have not checked the checkbox allow debugging , the result of code coverage will always be zero. »

    Norbert

Maybe you are looking for

  • Lost iTunes on PC with Windows 7

    Had trouble getting the update to ITunes on my PC would not do... tried to uninstall... couldn't... fact the error to juggle the regedit... so now completely lost all itunes... want to erase and start again... but can't... Please help

  • Need help network!

    We are a House of Apple? 2 iMac, MacBook 2, 1 MacBook Pro, iPhone 4. I have an AirPort Extreme and an airport express Network Extender. At one point, some of our phones or computers cannot access Internet. See the router, they are unable to open a se

  • Unable to turn on WLAN on my Satellite A660-18

    Hi all, I have a brand new laptop and the Wireless does not illuminate. The line button above the f keys must be faulty because nothing changes when I press the wireless button. Any way to get wireless to turn on without using this button?

  • Using the thresholds the in Vision Assistant Image calibration

    I would like to form images of calibration with some images of 1280 x 720 of grids that I take with a fisheye lens. Usually, when I raise Calibration training Vision Assistant interface, I have some tools really powerful local thresholding as in the

  • Windows Live Mail help - folders view

    I lost about 400 emails. I know that they are still in my system of e-mail somewhere when I'm looking for the e-mail address of the recipients, all messages (sent and received) that show the results. However, there is nothing to tell me exactly which